Nonlinear modal analysis of frictional ring damper for compressor blisk

Sun, Yekai; Yuan, Jie; Denimal, Enora; Salles, Loïc

doi:10.1115/GT2020-14277

Download

Paper published in a book (Scientific congresses and symposiums)

Nonlinear modal analysis of frictional ring damper for compressor blisk

Sun, Yekai; Yuan, Jie; Denimal, Enora et al.

2020 • In Proceedings of the ASME Turbo Expo 2020

Peer reviewed

Permalink
https://hdl.handle.net/2268/334190

DOI
10.1115/GT2020-14277

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

GT2020-14277.pdf

Author postprint (3.53 MB)

Download

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Compressors; Dampers; Modal analysis; Damping; Friction

Abstract :

[en] The use of integrally blisk is becoming popular because of the advantages in aerodynamic efficiency and mass reduction. However, in an integrally blisk, the lack of the contact interface leads to a low structural damping compared to an assembled bladed-disk. One emerging damping technique for the integrally blisk is based on the use of friction ring damper which exploits the contact interfaces at the underneath of the disk. In this paper, three different geometries of the ring dampers are investigated for damping enhancement of a blisk. A full-scale compressor blisk is considered as a case study where a node to node contact model is used to compute the contact forces. The dynamic behaviour of the blisk with the ring damper is investigated by using nonlinear modal analysis which allows a direct estimation of the damping generated by the friction interface. The damping performance for the different ring dampers are evaluated and compared. It appears that the damping efficiency as well as the shift in the resonant frequency for the different geometries are highly related to the nodal diameter and contact pressure/gap distributed within contact interface. The geometry of the ring damper has significant impact on the damping performance.

Disciplines :

Aerospace & aeronautics engineering

Author, co-author :

Sun, Yekai

Yuan, Jie

Denimal, Enora

Salles, Loïc ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M) ; Imperial College London > Mechanical Engineering > Vibration University Technology Centre

Language :

English

Title :

Nonlinear modal analysis of frictional ring damper for compressor blisk

Publication date :

2020

Event name :

ASME Turbo Expo 2020 Turbomachinery Technical Conference & Exposition

Event organizer :

ASME

Event date :

2020

Audience :

International

Main work title :

Proceedings of the ASME Turbo Expo 2020

Publisher :

ASME

Peer review/Selection committee :

Peer reviewed

Available on ORBi :

since 08 July 2025

Statistics

Number of views

17 (1 by ULiège)

Number of downloads

23 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Yuan, J., Scarpa, F., Allegri, G., Titurus, B., Patsias, S., and Rajasekaran, R., 2017. “Efficient computational techniques for mistuning analysis of bladed discs: A review”. Mech Syst Signal Process, 87, pp. 71 - 90.
Petrov, E. P., and Ewins, D. J., 2003. “Analytical formulation of friction interface elements for analysis of nonlinear multi-harmonic vibrations of bladed disks”. J Turbomach, 125(2), pp. 364 - 371.
Krack, M., Salles, L., and Thouverez, F., 2016. “Vibration prediction of bladed disks coupled by friction joints”. Arch Comput Method E, 24, pp. 589 - 636.
Pesaresi, L., Salles, L., Jones, A., Green, J. S., and Schwingshackl, C. W., 2017. “Modelling the nonlinear behaviour of an underplatform damper test rig for turbine applications”. Mech Syst Signal Process, 85, pp. 662 - 679.
Pesaresi, L., Armand, J., Schwingshackl, C., Salles, L., and Wong, C., 2018. “An advanced underplatform damper modelling approach based on a microslip contact model”. J Sound Vib, 436, pp. 327 - 340.
Yang, B. D., and Menq, C. H., 1998. “Characterization of 3d contact kinematics and prediction of resonant response of structures having 3d frictional constraint”. J Sound Vib, 217(5), pp. 909 - 925.
Niemotka, M. A., and Ziegert, J. C., 1995. “Optimal design of split ring dampers for gas turbine engines”. J Eng Gas Turb Power, 117(3), pp. 569 - 575.
Zucca, S., Firrone, C. M., and Facchini, M., 2010. “A method for the design of ring dampers for gears in aeronautical applications”. ASME. Paper No.IMECE2010 - 38788.
Wang, Y., Ye, H., Jiang, X., and Tian, A., 2018. “A prediction method for the damping effect of ring dampers applied to thin-walled gears based on energy method”. Symmetry, 10(12), p. 677.
Laxalde, D., Thouverez, F., Sinou, J.-J., and Lombard, J.P., 2007. “Qualitative analysis of forced response of blisks with friction ring dampers”. Eur J Mech A-Solid, 26(4), pp. 676 - 687.
Sun, Y., Yuan, J., Pesaresi, L., and Salles, L., 2018. “Nonlinear vibrational analysis for integrally bladed disk using frictional ring damper”. J Phys Conf Ser, 1106, p. 012026.
Laxalde, D., Thouverez, F., and Lombard, J.-P., 2010. “Forced response analysis of integrally bladed disks with friction ring dampers”. J Vib Acoust, 132(1), p. 011013.
Baek, S., and Epureanu, B., 2017. “Reduced-order modeling of bladed disks with friction ring dampers”. J Vib Acoust, 139(6), p. 061011.
Lupini, A., Mitra, M., and Epureanu, B. I., 2019. “Application of tuned vibration absorber concept to blisk ring dampers: A nonlinear study”. J Eng Gas Turb Power, 141(10), p. 101016.
Laxalde, D., Gibert, C., and Thouverez, F., 2008. “Experimental and numerical investigations of friction rings damping of blisks”. ASME. Paper No.GT2008 - 50862.
Tang, W., and Epureanu, B. I., 2019. “Geometric optimization of dry friction ring dampers”. Int J Nonlin Mech, 109, pp. 40 - 49.
Rosenberg, R. M., 1960. “Normal modes of nonlinear dual-mode systems”. J Appl Mech, 27(2), pp. 263 - 268.
Shaw, S. W., and Pierre, C., 1991. “Non-linear normal modes and invariant manifolds”. J Sound Vib, 150(1), pp. 170 - 173.
Laxalde, D., Salles, L., Blanc, L., and Thouverez, F., 2008. “Non-linear modal analysis for bladed disks with friction contact interfaces”. ASME. Paper No. GT2008 - 50860.
Krack, M., 2015. “Nonlinear modal analysis of nonconservative systems: Extension of the periodic motion concept”. Comput Struct, 154, pp. 59 - 71.
Krylov, N., and Bogoliubov, N., 1943. Introduction to Nonlinear Mechanics. Annals of mathematics studies. no.11. Princeton University Press.
Cameron, T. M., and Griffin, J. H., 1989. “An alternating frequency/time domain method for calculating the steady-state response of nonlinear dynamic systems”. J Appl Mech, 56(1), pp. 149 - 154.
Petrov, E. P., 2004. “A method for use of cyclic symmetry properties in analysis of nonlinear multiharmonic vibrations of bladed disks”. J Turbomach, 126(1), pp. 175 - 183.
Sarrouy, E., and Sinou, J.-J., 2011. “Non-linear periodic and quasi-periodic vibrations in mechanical systems - on the use of the harmonic balance methods”. In Advances in Vibration Analysis Research, F. Ebrahimi, ed. InTech, Rijeka, ch. 21.
Yuan, J., El-Haddad, F., Salles, L., and Wong, C., 2019. “Numerical assessment of reduced order modeling techniques for dynamic analysis of jointed structures with contact nonlinearities”. ASME. Paper No. GT2018 - 75303.
Craig, JR., R. R., and Bampton, M. C. C., 1968. “Coupling of substructures for dynamic analyses”. AIAA J, 6(7), pp. 1313 - 1319.
Firrone, C., and Zucca, S., 2011. “Modelling friction contacts in structural dynamics and its application to turbine bladed disks”. Numerical Analysis: Theory and Application, 14, pp. 301 - 334.
Sun, Y., Yuan, J., Pesaresi, L., Denimal, E., and Salles, L., 2020. “Parametric study and uncertainty quantification of the nonlinear modal properties of frictional dampers”. J Vib Acoust. [Accepted Manuscripts].