Nonlinear modal analysis of frictional ring damper for compressor blisk

Sun, Yekai; Yuan, Jie; Denimal, Enora; Salles, Loïc

doi:10.1115/1.4049761

Download

Article (Scientific journals)

Nonlinear modal analysis of frictional ring damper for compressor blisk

Sun, Yekai; Yuan, Jie; Denimal, Enora et al.

2021 • In Journal of Engineering for Gas Turbines and Power, 143 (3)

Peer Reviewed verified by ORBi

Permalink
https://hdl.handle.net/2268/334124

DOI
10.1115/1.4049761

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

sun-gtp_143_03_031008.pdf

Author postprint (2.74 MB)

Download

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Dampers; Friction; Modal analysis; Compressors; Finite element model; Nonlinear vibration

Abstract :

[en] The use of integrally blisk is becoming popular because of the advantages in aerodynamic efficiency and mass reduction. However, in an integrally blisk, the lack of the contact interface leads to a low structural damping compared to an assembled bladed disk. One emerging damping technique for the integrally blisk is based on the use of friction ring damper, which exploits the contact interfaces at the underneath of the disk. In this paper, three different geometries of the ring dampers are investigated for damping enhancement of a blisk. A full-scale compressor blisk is considered as a case study where a node-to-node contact model is used to compute the contact forces. The dynamic behavior of the blisk with the ring damper is investigated by using nonlinear modal analysis, which allows a direct estimation of the damping generated by the friction interface. The damping performance for the different ring dampers is evaluated and compared. It appears that the damping efficiency as well as the shift in the resonant frequency for the different geometries is highly related to the nodal diameter and contact pressure/gap distributed within contact interface. The geometry of the ring damper has significant impact on the damping performance.

Disciplines :

Aerospace & aeronautics engineering

Author, co-author :

Sun, Yekai

Yuan, Jie

Denimal, Enora

Salles, Loïc ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M) ; Imperial College London > Mechanical Engineering > Vibration University Technology Centre

Language :

English

Title :

Nonlinear modal analysis of frictional ring damper for compressor blisk

Publication date :

2021

Journal title :

Journal of Engineering for Gas Turbines and Power

ISSN :

0742-4795

eISSN :

1528-8919

Volume :

143

Issue :

Peer reviewed :

Peer Reviewed verified by ORBi

Available on ORBi :

since 07 July 2025

Statistics

Number of views

34 (0 by ULiège)

Number of downloads

53 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Yuan, J., Scarpa, F., Allegri, G., Titurus, B., Patsias, S., and Rajasekaran, R., 2017, "Efficient Computational Techniques for Mistuning Analysis of Bladed Discs: A Review," Mech. Syst. Signal Process., 87, pp. 71-90.
Petrov, E. P., and Ewins, D. J., 2003, "Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks," ASME J. Turbomach., 125(2), pp. 364-371.
Krack, M., Salles, L., and Thouverez, F., 2017, "Vibration Prediction of Bladed Disks Coupled by Friction Joints," Arch. Comput. Methods Eng., 24(3), pp. 589-636.
Pesaresi, L., Salles, L., Jones, A., Green, J. S., and Schwingshackl, C. W., 2017, "Modelling the Nonlinear Behaviour of an Underplatform Damper Test Rig for Turbine Applications," Mech. Syst. Signal Process., 85, pp. 662-679.
Pesaresi, L., Armand, J., Schwingshackl, C., Salles, L., and Wong, C., 2018, "An Advanced Underplatform Damper Modelling Approach Based on a Microslip Contact Model," J. Sound Vib., 436, pp. 327-340.
Yang, B. D., and Menq, C. H., 1998, "Characterization of 3d Contact Kinematics and Prediction of Resonant Response of Structures Having 3D Frictional Constraint," J. Sound Vib., 217(5), pp. 909-925.
Niemotka, M. A., and Ziegert, J. C., 1995, "Optimal Design of Split Ring Dampers for Gas Turbine Engines," ASME J. Eng. Gas Turbines Power, 117(3), pp. 569-575.
Zucca, S., Firrone, C. M., and Facchini, M., 2010, "A Method for the Design of Ring Dampers for Gears in Aeronautical Applications," ASME Paper No. IMECE2010-38788.
Wang, Y., Ye, H., Jiang, X., and Tian, A., 2018, "A Prediction Method for the Damping Effect of Ring Dampers Applied to Thin-Walled Gears Based on Energy Method," Symmetry, 10(12), p. 677.
Laxalde, D., Thouverez, F., Sinou, J.-J., and Lombard, J.-P., 2007, "Qualitative Analysis of Forced Response of Blisks With Friction Ring Dampers," Eur. J. Mech. A/Solids, 26(4), pp. 676-687.
Sun, Y., Yuan, J., Pesaresi, L., and Salles, L., 2018, "Nonlinear Vibrational Analysis for Integrally Bladed Disk Using Frictional Ring Damper," J. Phys. Conf. Ser., 1106, p. 012026.
Laxalde, D., Thouverez, F., and Lombard, J.-P., 2010, "Forced Response Analysis of Integrally Bladed Disks With Friction Ring Dampers," ASME J. Vib. Acoust., 132(1), p. 011013.
Baek, S., and Epureanu, B., 2017, "Reduced-Order Modeling of Bladed Disks With Friction Ring Dampers," ASME J. Vib. Acoust., 139(6), p. 061011.
Lupini, A., Mitra, M., and Epureanu, B. I., 2019, "Application of Tuned Vibration Absorber Concept to Blisk Ring Dampers: A Nonlinear Study," ASME J. Eng. Gas Turbines Power, 141(10), p. 101016.
Wu, Y., Li, L., Fan, Y., Zucca, S., Gastaldi, C., and Ma, H., 2020, "Design of Dry Friction and Piezoelectric Hybrid Ring Dampers for Integrally Bladed Disks Based on Complex Nonlinear Modes," Comput. Struct., 233, p. 106237.
Laxalde, D., Gibert, C., and Thouverez, F., 2008, "Experimental and Numerical Investigations of Friction Rings Damping of Blisks," ASME Paper No. GT2008-50862.
Tang, W., and Epureanu, B. I., 2019, "Geometric Optimization of Dry Friction Ring Dampers," Int. J. Non-Linear Mech., 109, pp. 40-49.
Rosenberg, R. M., 1960, "Normal Modes of Nonlinear Dual-Mode Systems," ASME J. Appl. Mech., 27(2), pp. 263-268.
Shaw, S. W., and Pierre, C., 1991, "Non-Linear Normal Modes and Invariant Manifolds," J. Sound Vib., 150(1), pp. 170-173.
Sarrouy, E., 2019, "Phase Driven Modal Synthesis for Forced Response Evaluation," Seventh International Conference on Nonlinear Vibrations, Localization and Energy Transfer, Marseille, France, July 1-4.
Laxalde, D., Salles, L., Blanc, L., and Thouverez, F., 2008, "Non-Linear Modal Analysis for Bladed Disks With Friction Contact Interfaces," ASME Paper No. GT2008-50860.
Krack, M., 2015, "Nonlinear Modal Analysis of Nonconservative Systems: Extension of the Periodic Motion Concept," Comput. Struct., 154, pp. 59-71.
Krylov, N., and Bogoliubov, N., 1943, Introduction to Non-Linear Mechanics (Annals of Mathematics Studies, No. 11), Princeton University Press, Princeton, NJ.
Cameron, T. M., and Griffin, J. H., 1989, "An Alternating Frequency/ Time Domain Method for Calculating the Steady-State Response of Nonlinear Dynamic Systems," ASME J. Appl. Mech., 56(1), pp. 149-154.
Petrov, E. P., 2004, "A Method for Use of Cyclic Symmetry Properties in Analysis of Nonlinear Multiharmonic Vibrations of Bladed Disks," ASME J. Turbomach., 126(1), pp. 175-183.
Sarrouy, E., and Sinou, J.-J., In F. Ebrahimi, eds., 2011, "Non-Linear Periodic and Quasi-Periodic Vibrations in Mechanical Systems - On the Use of the Harmonic Balance Methods," Advances in Vibration Analysis Research, InTech, Rijeka, Croatia.
Yuan, J., El-Haddad, F., Salles, L., and Wong, C., 2019, "Numerical Assessment of Reduced Order Modeling Techniques for Dynamic Analysis of Jointed Structures With Contact Nonlinearities," ASME Paper No. GT2018-75303.
Craig, J. R., R. R., and Bampton, M. C. C., 1968, "Coupling of Substructures for Dynamic Analyses," AIAA J., 6(7), pp. 1313-1319.
Firrone, C., and Zucca, S., 2011, "Modelling Friction Contacts in Structural Dynamics and Its Application to Turbine Bladed Disks," Numer. Anal. Theory Appl., 14, pp. 301-334.
Sun, Y., Yuan, J., Pesaresi, L., Denimal, E., and Salles, L., 2020, "Parametric Study and Uncertainty Quantification of the Nonlinear Modal Properties of Frictional Dampers," ASME J. Vib. Acoust., 142(5), p. 051102.