Yuan, J., Scarpa, F., Titurus, B., Allegri, G., Patsias, S., and Rajasekaran, R., 2017, "Novel Frame Model for Mistuning Analysis of Bladed Disk Systems, " ASME J. Vib. Acoust., 139(3), p. 031016.
Krack, M., Salles, L., and Thouverez, F., 2016, "Vibration Prediction of Bladed Disks Coupled by Friction Joints, " Arch. Comput. Methods Eng., 24(3), pp. 589-636.
Sinha, A., and Trikutam, K. T., 2017, "Optimal Vibration Absorber With a Friction Damper, " ASME J. Vib. Acoust., 140(2), p. 021015.
Pesaresi, L., Salles, L., Jones, A., Green, J. S., and Schwingshackl, C. W., 2017, "Modelling the Nonlinear Behaviour of an Underplatform Damper Test Rig for Turbine Applications, " Mech. Syst. Signal Process., 85(15), pp. 662-679.
Pesaresi, L., Armand, J., Schwingshackl, C., Salles, L., and Wong, C., 2018, "An Advanced Underplatform Damper Modelling Approach Based on a Microslip Contact Model, " J. Sound Vib., 436(8), pp. 327-340.
Panning, L., Sextro, W., and Popp, K., 2000, "Optimization of Interblade Friction Damper Design, " ASME Turbo Expo 2000: Power for Land, Sea, and Air, Munich, Germany, May.
Panning, L., Sextro, W., and Popp, K., 2002, "Optimization of the Contact Geometry Between Turbine Blades and Underplatform Dampers With Respect to Friction Damping, " ASME Turbo Expo 2002: Power for Land, Sea, and Air, Amsterdam, The Netherlands, June.
Gastaldi, C., and Gola, M. M., 2016, "Pre-Optimization of Asymmetrical Underplatform Dampers, " ASME J. Eng. Gas Turb. Power, 139(1), p. 012504.
Gastaldi, C., Berruti, T. M., and Gola, M. M., 2018, "Best Practices for Underplatform Damper Designers, " Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci., 232(7), pp. 1221-1235.
Krylov, N., and Bogoliubov, N., 1943, Introduction to Non-Linear Mechanics (Annals of Mathematics Studies. No. 11), Princeton University Press, Princeton, NJ.
Urabe, M., 1965, "Galerkin's Procedure for Nonlinear Periodic Systems, " Arch. Rational Mech. Anal., 20(2), pp. 120-152.
Cameron, T. M., and Griffin, J. H., 1989, "An Alternating Frequency/Time Domain Method for Calculating the Steady-State Response of Nonlinear Dynamic Systems, " ASME J. Appl. Mech., 56(1), pp. 149-154.
Sarrouy, E., and Sinou, J.-J., 2011, "Non-Linear Periodic and Quasi-Periodic Vibrations in Mechanical Systems-On the Use of the Harmonic Balance Methods, " Advances in Vibration Analysis Research, F. Ebrahimi, ed., InTech, Rijeka, Chap. 21.
Rosenberg, R. M., 1960, "Normal Modes of Nonlinear Dual-Mode Systems, " ASME J. Appl. Mech., 27(2), pp. 263-268.
Shaw, S. W., and Pierre, C., 1991, "Non-Linear Normal Modes and Invariant Manifolds, " J. Sound Vib., 150(1), pp. 170-173.
Laxalde, D., Salles, L., Blanc, L., and Thouverez, F., 2008, "Non-Linear Modal Analysis for Bladed Disks With Friction Contact Interfaces, " ASME Turbo Expo 2008: Power for Land, Sea, and Air, Berlin, Germany, June.
Krack, M., 2015, "Nonlinear Modal Analysis of Nonconservative Systems: Extension of the Periodic Motion Concept, " Comput. Struct., 154(1), pp. 59-71.
Jahn, M., Tatzko, S., Panning-von Scheidt, L., and Wallaschek, J., 2019, "Comparison of Different Harmonic Balance Based Methodologies for Computation of Nonlinear Modes of Non-Conservative Mechanical Systems, " Mech. Syst. Signal Process., 127(15), pp. 159-171.
Petrov, E. P., 2007, "A Sensitivity-Based Method for Direct Stochastic Analysis of Nonlinear Forced Response for Bladed Discs With Friction Interfaces, " ASME J. Eng. Gas Turb. Power, 130(2), p. 022503.
Krack, M., Panning, L., Wallaschek, J., Siewert, C., and Hartung, A., 2012, "Robust Design of Friction Interfaces of Bladed Disks With Respect to Parameter Uncertainties, " ASME Paper No. GT2012-68578.
Krack, M., Tatzko, S., Panning-von Scheidt, L., and Wallaschek, J., 2014, "Reliability Optimization of Friction-Damped Systems Using Nonlinear Modes, " J. Sound Vib., 333(13), pp. 2699-2712.
Metropolis, N., and Ulam, S., 1949, "The Monte Carlo Method, " J. Am. Stat. Assoc., 44(247), pp. 335-341.
Sudret, B., 2008, "Global Sensitivity Analysis Using Polynomial Chaos Expansions, " Reliab. Eng. Syst. Saf., 93(7), pp. 964-979.
Kleijnen, J. P., 2009, "Kriging Metamodeling in Simulation: A Review, " Eur. J. Oper. Res., 192(3), pp. 707-716.
Cortes, C., and Vapnik, V., 1995, "Support-Vector Networks, " Mach. Learn., 20(3), pp. 273-297.
Yuan, J., Allegri, G., Scarpa, F., Rajasekaran, R., and Patsias, S., 2015, "Novel Parametric Reduced Order Model for Aeroengine Blade Dynamics, " Mech. Syst. Signal Process., 62-63, pp. 235-253.
McKay, M. D., Beckman, R. J., and Conover, W. J., 1979, "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output From a Computer Code, " Technometrics, 21(2), pp. 239-245.
Krack, M., Panning-von Scheidt, L., and Wallaschek, J., 2013, "A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical Systems, " J. Sound Vib., 332(25), pp. 6798-6814.
Przemieniecki, J., 1985, Theory of Matrix Structural Analysis, Dover Civil and Mechanical Engineering, Dover.
Craig, R. R., and Bampton, M. C. C., 1968, "Coupling of Substructures for Dynamic Analyses, " AIAA J., 6(7), pp. 1313-1319.
Yuan, J., El-Haddad, F., Salles, L., and Wong, C., 2019, "Numerical Assessment of Reduced Order Modeling Techniques for Dynamic Analysis of Jointed Structures With Contact Nonlinearities, " ASME J. Eng. Gas Turb. Power, 141(3), p. 031027.
Eriten, M., Polycarpou, A., and Bergman, L., 2011, "Physics-Based Modeling for Fretting Behavior of Nominally Flat Rough Surfaces, " Int. J. Solids Struct., 48(10), pp. 1436-1450.
Vakis, A., Yastrebov, V., Scheibert, J., Nicola, L., Dini, D., Minfray, C., Almqvist, A., Paggi, M., Lee, S., Limbert, G., Molinari, J., Anciaux, G., Aghababaei, R., Restrepo, S. E., Papangelo, A., Cammarata, A., Nicolini, P., Putignano, C., Carbone, G., Stupkiewicz, S., Lengiewicz, J., Costagliola, G., Bosia, F., Guarino, R., Pugno, N., Müser, M., and Ciavarella, M., 2018, "Modeling and Simulation in Tribology Across Scales: An Overview, " Tribol. Int., 125, pp. 169-199.
Yang, B. D., Chu, M. L., and Menq, C. H., 1998, "Stick-Slip-Separation Analysis and Non-Linear Stiffness and Damping Characterization of Friction Contacts Having Variable Normal Load, " J. Sound Vib., 210(4), pp. 461-481.
Petrov, E. P., and Ewins, D. J., 2003, "Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks, " ASME J. Turbomach., 125(2), pp. 364-371.
Baudin, M., Dutfoy, A., Iooss, B., and Popelin, A.-L., 2016, "Openturns: An Industrial Software for Uncertainty Quantification in Simulation, " Handbook of Uncertainty Quantification, R. Ghanem, D. Higdon, and H. Owhadi, eds., Springer International Publishing, Cham, pp. 1-38.
