Dynamic analysis of fretting-wear in friction contact interfaces

Complex-coupling; Dynamical response; Friction contact interfaces; Nonlinear problems; Number of degrees of freedom; Quasi static analysis; Realistic model; Unilateral contact; Nuclear Energy and Engineering; Fuel Technology; Aerospace Engineering; Energy Engineering and Power Technology; Mechanical Engineering

Abstract :

[en] Fretting wear is a very important phenomenon occurring in bladed disks. It causes the blades to be replaced in turbomachines during their life-cycle. Methods exist to predict fretting-wear in quasistatic analysis. However, they do not predict all the phenomena observed in blade attachments on real turbomachines. That is why this study assumes that dynamics plays a role in fretting-wear. This paper is devoted to the realistic modeling and calculation of fretting-wear and dynamical response of structures in unilateral contact with friction. Vibration and wear phenomena present very different scales both in time and space. Therefore the difficulty is in finding methods that enable one to solve the nonlinear problem with a good compromise between the approximations made about the dynamical aspects and those linked with fretting-wear issues. Here, phenomenological examples are studied. They involve a small number of degrees of freedom with a view to understanding the complex coupling between vibration and fretting-wear. This way, they will show the relative importance of parameters. © 2010 by ASME.

Disciplines :

Aerospace & aeronautics engineering

Author, co-author :

Salles, Loïc ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M) ; École Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes, 69134 Ecully Cedex, France ; Snecma-Safran Group, 77550 Moissy-Cramayel, France ; Moscow State University of Technology Named After Bauman, Moscow 105005, Russian Federation

Blanc, Laurent; École Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes, 69134 Ecully Cedex, France

Thouverez, Fabrice; École Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes, 69134 Ecully Cedex, France

Gouskov, Alexander M.; Moscow State University of Technology Named After Bauman, Moscow 105005, Russian Federation

Language :

English

Title :

Dynamic analysis of fretting-wear in friction contact interfaces

Publication date :

2010

Journal title :

Journal of Engineering for Gas Turbines and Power

ISSN :

0742-4795

eISSN :

1528-8919

Publisher :

American Society of Mechanical Engineers (ASME)

Volume :

132

Issue :

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

http://asmedigitalcollection.asme.org/gasturbinespower/article-pdf/doi/10.1115/1.3028229/5707900/012503_1.pdf

Funding text :

The authors thank Snecma for its technical and financial support. This work was conducted in the framework of the MAIA mechanical research and technology program sponsored by CNRS, ONERA and the SAFRAN Group.

Available on ORBi :

since 05 July 2025

Statistics

Number of views

14 (0 by ULiège)

Number of downloads

0 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Charleux, D., Gibert, C., Thouverez, F., and Dupeux, J., 2006, "Numerical and Experimental Study of Friction Damping in Blade Attachments of Rotating Bladed Disks," Int. J. Rotating Mach., 2006, p. 71302.
Nacivet, S., Pierre, C., Thouverez, F., and Jezequel, L., 2003, "A Dynamic Lagrangian Frequency-Time Method for the Vibration of Dry-Friction-Damped Systems," J. Sound Vib., 265, pp. 201-219.
Gallego, L., Nélias, D., and Jacq, C., 2006, "A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces," ASME J. Tribol., 128, pp. 476-486.
Paulin, C., Fouvry, S., and Deyber, S., 2005, "Wear Kinetics of Ti-6Al-4V Under Constant and Variable Fretting Sliding Conditions," Wear, 259, pp. 292-299.
Levy, G., 1980, "Modeling of Coulomb Damping and Wear of Vibrating Systems," Wear, 64(1), pp. 57-82.
Sextro, W., 2002, Dynamical Contact Problems with Friction: Models, Methods, Experiments and Applications, Springer, New York.
Meng, H., and Ludema, K., 1995, "Wear Models and Predictive Equations: Their Form and Content," Wear, 181-183, pp. 443-457.
Fouvry, S., Liskiewicz, T., Kapsa, P., Hannel, S., and Sauger, E., 2003, "An Energy Description of Wear Mechanisms and Its Applications to Oscillating Sliding Contacts," Wear, 255, pp. 287-298.
Archard, J., 1953, "Contact and Rubbing of Flat Surface," J. Appl. Phys., 24, pp. 981-988.
McColl, I., Ding, J., and Leen, S., 2004, "Finite Element Simulation and Experimental Validation of Fretting Wear," Wear, 256, pp. 1114-1127.
Öqvist, M., 2001, "Numerical Simulations of Mild Wear Using Updated Geometry With Different Step Size Approaches," Wear, 249, pp. 6-11.
Põdra, P., and Andersson, S., 1997, "Wear Simulation With the Winkler Surface Model," Wear, 207, pp. 79-85.
Sfantos, G., and Aliabadi, M., 2006, "Application of BEM and Optimization Technique to Wear Problems," Int. J. Solids Struct., 43, pp. 3626-3642.
Guillen, J., and Pierre, C., 1999, "An Efficient, Hybrid, Frequency-Time Domain Method for the Dynamics of Large-Scale Dry Friction Damped Structural Systems," Iutam Symposium on Unilateral Multibody Contacts.
Csaba, G., 1998, "Forced Response Analysis in Time and Frequency Domains of a Tuned Bladed Disk With Friction Dampers," J. Sound Vib., 214, pp. 395-412.
Petrov, E., and Ewins, D., 2003, "Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks," ASME J. Turbomach., 125, pp. 364-371.
D. Laxalde, L. Salles, L. Blanc, and Thouverez, F., 2008, "Non-Linear Modal Analysis for Bladed Disks With Friction Contact Interfaces," ASME Paper No. GT2008-50860.
Stromberg, N., 1997, "An Augmented Lagrangian Method for Fretting Problems," Eur. J. Mech. A/Solids, 16, pp. 573-593.
Klarbring, A., 1990, "Derivation and Analysis of Rate Boundary-Value Problems of Frictional Contact," Eur. J. Mech. A/Solids, 9, pp. 53-85.
Lemaître, J., and Chaboche, J., 1990, Mechanics of Solid Materials Mécanique des Matériaux Solides English, Cambridge University Press, Cambridge.
Nayfeh, A., and Mook, D., 1979, Nonlinear Oscillations, Wiley-Interscience, New York.
Meirovitch, L., 2004, Methods of Analytical Dynamics, Dover, New York.
Cusumano, J., and Chatterjee, A., 2000, "Steps Towards a Qualitative Dynamics of Damage Evolution," Int. J. Solids Struct., 37, pp. 6397-6417.
Cameron, T., and Griffin, J., 1989, "An Alternating Frequency/Time Domain Method for Calculating the Steady-State Response of Nonlinear Dynamic Systems," ASME Trans. J. Appl. Mech., 56, pp. 149-154.
Sanliturk, K., Ewins, D., Elliott, R., and Green, J., 2001, "Friction Damper Optimization: Simulation of Rainbow Tests," ASME J. Eng. Gas Turbines Power, 123, pp. 930-939.
Petrov, E., and Ewins, D., 2001, "Models of Friction Damping With Variable Normal Load for Time-Domain Analysis of Vibrations," Proceedings of the International Conference on Noise and Vibration Engineering (ISMA), ISMA, Leuven, Belgium.
D. Laxalde, F. Thouverez, J. Sinou, and J. Lombard, 2007, "Qualitative Analysis of Forced Response of Blisks With Friction Ring Dampers," Eur. J. Mech. A/Solids, 26, pp. 676-687.
Poudou, O., and Pierre, C., 2003, "Hybrid Frequency-Time Domain Methods for the Analysis of Complex Structural Systems With Dry Friction Damping," Proceedings of the AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, New York, Vol. 1, p. 111.
Ciǧeroǧlu, E., and Özgüven, H., 2006, "Nonlinear Vibration Analysis of Bladed Disks With Dry Friction Dampers," J. Sound Vib., 295, pp. 1028-1043.