nanocomposite; carbon nanotube; self-healing material; shape-memory material
Abstract :
[en] Electrically triggered shape memory polymers efficiency has been proven by numerous studies making them promising novel structural materials for high-end applications. In this field, poly(ε-caprolactone) covalent adaptable networks (PCL-CAN) are particularly appealing since they benefit from excellent shape mem- ory (SM) properties combined with network reconfiguration making easy the design of self-actuated devices of complex shape. Preparation of conducting PCL-CAN networks by melt blending multi-walled carbon nanotubes (MWCNTs) with four-arm star-shaped PCL end-capped with maleimide and furan groups is here inves- tigated. The conventional tensile tester and dynamic mechanical analysis demonstrated the reinforcement of the composite mechanical properties paired with excellent shape memory properties (recovery and fixity ratios about 99%). The simultaneous measurement of the sample resistivity was also integrated to these experiments allowing to follow its evolution during the SM cycles. Rheological measurements highlighted the impact of MWCNTs on the recyclability and self-healing properties of the composite. Electrical triggering of the shape recovery through Joule resistive heating is also deeply studied. The combination of all these properties in the developed material offers unique opportunities to design self-folding multi-materials which is illustrated through the design of smart multi-layered composites. This high-performance composite is especially attractive for reconfiguration of the permanent shape of complex geometry self-deploying devices and their thermal and electrical triggering.
Research Center/Unit :
CESAM - Complex and Entangled Systems from Atoms to Materials - ULiège CERM - Center for Education and Research on Macromolecules - ULiège
Disciplines :
Materials science & engineering Chemistry
Author, co-author :
Houbben, Maxime ; University of Liège [ULiège] - Complex and Entangled Systems from Atoms to Materials [CESAM] - Research Unit, Center for Education and Research on Macromolecules [CERM] - Belgium
Sànchez, Clara Pereira; University of Liège [ULiège] - Department of Electrical Engineering and Computer Science - Belgium
Vanderbemden, Philippe ; University of Liège [ULiège] - Department of Electrical Engineering and Computer Science - Belgium
Noels, Ludovic ; University of Liège [ULiège] - Department of Aerospace and Mechanical Engineering - Belgium
Jérôme, Christine ; University of Liège [ULiège] - Complex and Entangled Systems from Atoms to Materials [CESAM] - Research Unit, Center for Education and Research on Macromolecules [CERM] - Belgium
Language :
English
Title :
MWCNTs filled PCL covalent adaptable networks: towards reprocessable, self-healing and fast electrically-triggered shape-memory composites
Publication date :
13 June 2023
Journal title :
Polymer
ISSN :
0032-3861
eISSN :
1873-2291
Publisher :
Elsevier BV
Volume :
278
Pages :
125992
Peer reviewed :
Peer Reviewed verified by ORBi
Funders :
FWB - Fédération Wallonie-Bruxelles ULiège. ARC - Université de Liège. Actions de Recherche Concertées
Funding text :
This research was funded through the “Actions de recherche concertées 2017 − Synthesis, Characterization, and Multiscale Model of Smart Composite Materials (S3CM3) 17/21-07”, financed by the “Direction Générale de l’Enseignement non obligatoire de la Recherche scientifique, Direction de la Recherche scientifique, Communauté française de Belgique et octroyées par l’Académie Universitaire Wallonie- Europe”
scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.
Bibliography
Zou, W., Dong, J., Luo, Y., Zhao, Q., Xie, T., Dynamic covalent polymer networks: from old chemistry to modern day innovations. Adv. Mater., 29, 2017, 10.1002/adma.201606100.
Yan, W., Ding, Y., Zhang, R., Luo, X., Sheng, P., Xue, P., He, J., Dual-functional polymer blends with rapid thermo-responsive shape memory and repeatable self-healing properties. Polymer, 239, 2022, 124436, 10.1016/j.polymer.2021.124436.
Chen, Y., Zhao, X., Luo, C., Shao, Y., Yang, M.-B., Yin, B., A facile fabrication of shape memory polymer nanocomposites with fast light-response and self-healing performance. Composites Part A Appl Sci Manuf, 135, 2020, 105931, 10.1016/j.compositesa.2020.105931.
Pandey, H., Mohol, S.S., Kandi, R., 4D printing of tracheal scaffold using shape-memory polymer composite. Mater. Lett., 2022, 133238, 10.1016/j.matlet.2022.133238.
Romo-Uribe, A., Robust POSS-PEG networks. Nanostructure, viscoelasticity and shape memory behavior. Polymer, 250, 2022, 124899, 10.1016/j.polymer.2022.124899.
Song, M., Liu, X., Yue, H., Li, S., Guo, J., 4D printing of PLA/PCL-based bio-polyurethane via moderate cross-linking to adjust the microphase separation. Polymer, 256, 2022, 125190, 10.1016/j.polymer.2022.125190.
Li, Z., Yu, R., Guo, B., Shape-memory and self-healing polymers based on dynamic covalent bonds and dynamic noncovalent interactions: synthesis, mechanism, and application. ACS Appl. Bio Mater. 4 (2021), 5926–5943, 10.1021/acsabm.1c00606.
Bi, H., Ye, G., Sun, H., Ren, Z., Gu, T., Xu, M., Mechanically robust, shape memory, self-healing and 3D printable thermoreversible cross-linked polymer composites toward conductive and biomimetic skin devices applications. Addit. Manuf., 49, 2022, 102487, 10.1016/j.addma.2021.102487.
Caprasse, J., Riva, R., Thomassin, J.-M., Jérôme, C., Hybrid covalent adaptable networks from cross-reactive poly(ε-caprolactone) and poly(ethylene oxide) stars towards advanced shape-memory materials. Mater Adv 2 (2021), 7077–7087, 10.1039/D1MA00595B.
Defize, T., Thomassin, J.-M., Alexandre, M., Gilbert, B., Riva, R., Jérôme, C., Comprehensive study of the thermo-reversibility of Diels–Alder based PCL polymer networks. Polymer 84 (2016), 234–242, 10.1016/j.polymer.2015.11.055.
Houbben, M., Thomassin, J.-M., Jérôme, C., Supercritical CO2 blown poly(ε-caprolactone) covalent adaptable networks towards unprecedented low density shape memory foams. Mater Adv 3 (2022), 2918–2926, 10.1039/D2MA00040G.
Khan, T., Irfan, M.S., Ali, M., Dong, Y., Ramakrishna, S., Umer, R., Insights to low electrical percolation thresholds of carbon-based polypropylene nanocomposites. Carbon N Y 176 (2021), 602–631, 10.1016/j.carbon.2021.01.158.
Tekay, E., Preparation and characterization of electro-active shape memory PCL/SEBS-g-MA/MWCNT nanocomposites. Polymer, 209, 2020, 122989, 10.1016/j.polymer.2020.122989.
Pereira Sánchez, C., Houbben, M., Fagnard, J.-F., Harmeling, P., Jérôme, C., Noels, L., Vanderbemden, P., Experimental characterization of the thermo-electro-mechanical properties of a shape memory composite during electric activation. Smart Mater. Struct., 31, 2022, 095029, 10.1088/1361–665X/ac8297.
Göldel, A., Marmur, A., Kasaliwal, G.R., Pötschke, P., Heinrich, G., Shape-dependent localization of carbon nanotubes and carbon black in an immiscible polymer blend during melt mixing. Macromolecules 44 (2011), 6094–6102, 10.1021/ma200793a.
Toda, A., Androsch, R., Schick, C., Insights into polymer crystallization and melting from fast scanning chip calorimetry. Polymer 91 (2016), 239–263, 10.1016/j.polymer.2016.03.038.
Chen, Y.F., Tan, Y.J., Li, J., Hao, Y.B., Shi, Y.D., Wang, M., Graphene oxide-assisted dispersion of multi-walled carbon nanotubes in biodegradable Poly(ε-caprolactone) for mechanical and electrically conductive enhancement. Polym. Test. 65 (2018), 387–397, 10.1016/j.polymertesting.2017.12.019.
Huang, B., Vyas, C., Roberts, I., Poutrel, Q.A., Chiang, W.H., Blaker, J.J., Huang, Z., Bártolo, P., Fabrication and characterisation of 3D printed MWCNT composite porous scaffolds for bone regeneration. Mater. Sci. Eng. C 98 (2019), 266–278, 10.1016/j.msec.2018.12.100.
El Sayed, A.M., Synthesis, optical, thermal, electric properties and impedance spectroscopy studies on P(VC-MMA) of optimized thickness and reinforced with MWCNTs. Results Phys., 17, 2020, 103025, 10.1016/j.rinp.2020.103025.
Mosnáčková, K., Mrlík, M., Mičušík, M., Kleinová, A., Sasinková, V., Popelka, A., Opálková Šišková, A., Kasák, P., Dworak, C.L., Mosnáček, J., Light-Responsive hybrids based on carbon nanotubes with covalently attached PHEMA- g-PCL brushes. Macromolecules 54 (2021), 2412–2426, 10.1021/acs.macromol.0c02701.
Pekdemir, M.E., Kök, M., Qader, I.N., Aydogdu, Y., Preparation and physicochemical properties of mwcnt doped polyvinyl chloride/poly (ε-caprolactone) blend. J. Polym. Res. 29 (2022), 1–9, 10.1007/s10965-022-02947-1.
Grady, B.P., Effects of carbon nanotubes on polymer physics. J. Polym. Sci. B Polym. Phys. 50 (2012), 591–623, 10.1002/polb.23052.
Wurm, A., Lellinger, D., Minakov, A.A., Skipa, T., Pötschke, P., Nicula, R., Alig, I., Schick, C., Crystallization of poly(ε-caprolactone)/MWCNT composites: a combined SAXS/WAXS, electrical and thermal conductivity study. Polymer 55 (2014), 2220–2232, 10.1016/j.polymer.2014.02.069.
Defize, T., Riva, R., Raquez, J.M., Dubois, P., Jérôme, C., Alexandre, M., Thermoreversibly crosslinked poly(ε-caprolactone) as recyclable shape-memory polymer network. Macromol. Rapid Commun. 32 (2011), 1264–1269, 10.1002/marc.201100250.
Chung, T., Romo-uribe, A., Mather, P.T., Two-Way Reversible Shape Memory in a Semicrystalline Network. 2008, 184–192.
Floudas, G., Hilliou, L., Lellinger, D., Alig, I., Shear-Induced Crystallization of Poly (-caprolactone). 2. 2000, Evolution of Birefringence and Dichroism, 6466–6472.
Gandini, A., The furan/maleimide Diels-Alder reaction: a versatile click-unclick tool in macromolecular synthesis. Prog. Polym. Sci. 38 (2013), 1–29, 10.1016/j.progpolymsci.2012.04.002.
Chang, C.-M., Liu, Y.-L., Functionalization of multi-walled carbon nanotubes with furan and maleimide compounds through Diels–Alder cycloaddition. Carbon N Y 47 (2009), 3041–3049, 10.1016/j.carbon.2009.06.058.
Xu, D., Wang, Z., Role of multi-wall carbon nanotube network in composites to crystallization of isotactic polypropylene matrix. Polymer 49 (2008), 330–338, 10.1016/j.polymer.2007.11.041.
Prashantha, K., Soulestin, J., Lacrampe, M.F., Krawczak, P., Dupin, G., Claes, M., Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: assessment of rheological and mechanical properties. Compos. Sci. Technol. 69 (2009), 1756–1763, 10.1016/j.compscitech.2008.10.005.
Kota, A.K., Cipriano, B.H., Duesterberg, M.K., Gershon, A.L., Powell, D., Raghavan, S.R., Bruck, H.A., Electrical and rheological percolation in polystyrene/MWCNT nanocomposites. Macromolecules 40 (2007), 7400–7406, 10.1021/ma0711792.
Landa, M., Canales, J., Fernández, M., Muñoz, M.E., Santamaría, A., Effect of MWCNTs and graphene on the crystallization of polyurethane based nanocomposites, analyzed via calorimetry, rheology and AFM microscopy. Polym. Test. 35 (2014), 101–108, 10.1016/j.polymertesting.2014.03.008.
Menzer, K., Krause, B., Boldt, R., Kretzschmar, B., Weidisch, R., Pötschke, P., Percolation behaviour of multiwalled carbon nanotubes of altered length and primary agglomerate morphology in melt mixed isotactic polypropylene-based composites. Compos. Sci. Technol. 71 (2011), 1936–1943, 10.1016/j.compscitech.2011.09.009.
This website uses cookies to improve user experience. Read more
Save & Close
Accept all
Decline all
Show detailsHide details
Cookie declaration
About cookies
Strictly necessary
Performance
Strictly necessary cookies allow core website functionality such as user login and account management. The website cannot be used properly without strictly necessary cookies.
This cookie is used by Cookie-Script.com service to remember visitor cookie consent preferences. It is necessary for Cookie-Script.com cookie banner to work properly.
Performance cookies are used to see how visitors use the website, eg. analytics cookies. Those cookies cannot be used to directly identify a certain visitor.
Used to store the attribution information, the referrer initially used to visit the website
Cookies are small text files that are placed on your computer by websites that you visit. Websites use cookies to help users navigate efficiently and perform certain functions. Cookies that are required for the website to operate properly are allowed to be set without your permission. All other cookies need to be approved before they can be set in the browser.
You can change your consent to cookie usage at any time on our Privacy Policy page.
