3D printing; Dynamic mechanical analysis (DMA); Interphase; Polyjet technique; 3-D printing; 3D-printing; Dissipative behavior; Dynamic mechanical analyse; Heterogeneous composites; Interpenetrating phase composites; Manufacturing methods; UV-light; Ceramics and Composites; Mechanics of Materials; Mechanical Engineering; Industrial and Manufacturing Engineering
Résumé :
[en] 3D printing, in particular the Polyjet technology, has been widely employed for the production of complex heterogeneous composites such as co-continuous architectures (the so-called Interpenetrating Phase Composites, IPCs). It is a manufacturing method in which discrete photopolymer droplets of different materials can be deposited on a build tray and cured by UV light lamp. Previous research already demonstrated how the characteristics of the interface between different photopolymers can vary if formed before or after UV curing process, with the formation of a narrow or broad interphase. In the present work, the dynamic-mechanical properties of multilayer bimaterial composites (made combining a glassy and a rubbery polymer) were investigated under tensile loading, which is relatively insensitive to the spatial arrangement of layers, as opposed to bending. The use of a simple parallel configuration allowed the development of an analytical model which incorporates the properties of the two photopolymers and their interphase, considering their effect on both elastic and dissipative behaviour of the composites; in particular, the interphase behaviour is quite close to that of the glassy polymer and even small quantities are sufficient to dramatically change the overall dissipative behaviour of the composite. It is demonstrated that reliable modelling of real co-continuous architectures as obtained by Polyjet printing (and similar techniques) should include the effect of the interphase.
Disciplines :
Science des matériaux & ingénierie
Auteur, co-auteur :
De Noni, Lorenzo ; Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milan, Italy
Zorzetto, Laura ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M) ; Max Planck Institute of Colloids and Interfaces, Department of Biomaterials, Potsdam, Germany
Briatico-Vangosa, Francesco ; Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milan, Italy
Rink, Marta; Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milan, Italy
Ruffoni, Davide ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M)
Andena, Luca ; Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Milan, Italy
Langue du document :
Anglais
Titre :
Modelling the interphase of 3D printed photo-cured polymers
We would like to thank Stefano Tagliabue from Politecnico di Milano for the help during the tests and Quentin Grossman from ULiege for printing some of the samples used in this work and for taking the light micrographs.
Ge, C., Cormier, D., Rice, B., Damping and cushioning characteristics of Polyjet 3D printed photopolymer with Kelvin model. J Cell Plast 57 (2021), 517–534, 10.1177/0021955X20944972.
Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q., Hui, D., Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B Eng 143 (2018), 172–196, 10.1016/j.compositesb.2018.02.012.
Ligon, S.C., Liska, R., Stampfl, J., Gurr, M., Mülhaupt, R., Polymers for 3D printing and customized additive manufacturing. Chem Rev 117 (2017), 10212–10290, 10.1021/acs.chemrev.7b00074.
Bandyopadhyay, A., Heer, B., Additive manufacturing of multi-material structures. Mater Sci Eng R Rep 129 (2018), 1–16, 10.1016/j.mser.2018.04.001.
Velasco-Hogan, A., Xu, J., Meyers, M.A., Additive manufacturing as a method to design and optimize bioinspired structures. Adv Mater, 30, 2018, 10.1002/adma.201800940.
Zorzetto, L., Ruffoni, D., Wood-inspired 3D-printed helical composites with tunable and enhanced mechanical performance. Adv Funct Mater, 29, 2019, 10.1002/adfm.201805888.
Rafiee, M., Farahani, R.D., Therriault, D., Multi-material 3D and 4D printing: a survey. Adv Sci 7 (2020), 1–26, 10.1002/advs.201902307.
Libonati, F., Gu, G.X., Qin, Z., Vergani, L., Buehler, M.J., Bone-inspired materials by design: toughness amplification observed using 3D printing and testing. Adv Eng Mater 18 (2016), 1354–1363, 10.1002/adem.201600143.
Kim, Y., Kim, Y., Libonati, F., Ryu, S., Designing tough isotropic structural composite using computation, 3D printing and testing. Compos B Eng 167 (2019), 736–745, 10.1016/j.compositesb.2019.03.039.
Dunlop, J.W.C., Fratzl, P., Biological composites. Annu Rev Mater Res 40 (2010), 1–24, 10.1146/annurev-matsci-070909-104421.
Porter, M.M., Ravikumar, N., Barthelat, F., Martini, R., 3D-printing and mechanics of bio-inspired articulated and multi-material structures. J Mech Behav Biomed Mater 73 (2017), 114–126, 10.1016/j.jmbbm.2016.12.016.
Meisel, N.A., Dillard, D.A., Williams, C.B., Impact of material concentration and distribution on composite parts manufactured via multi-material jetting. Rapid Prototyp J 24 (2018), 872–879, 10.1108/RPJ-01-2017-0005.
Hofmann, M., 3D printing gets a boost and opportunities with polymer materials. ACS Macro Lett 3 (2014), 382–386, 10.1021/mz4006556.
Wang, L., Lau, J., Thomas, E.L., Boyce, M.C., Co-continuous composite materials for stiffness, strength, and energy dissipation. Adv Mater 23 (2011), 1524–1529, 10.1002/adma.201003956.
Feng, X.Q., Mai, Y.W., Qin, Q.H., A micromechanical model for interpenetrating multiphase composites. Comput Mater Sci 28 (2003), 486–493, 10.1016/j.commatsci.2003.06.005.
Al-Ketan, O., Al-Rub, R.K.A., Rowshan, R., Mechanical properties of a new type of architected interpenetrating phase composite materials. Adv Mater Technol 2 (2017), 1–7, 10.1002/admt.201600235.
Dalaq, A.S., Abueidda, D.W., Abu Al-Rub, R.K., Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements. Composer Part A Appl Sci Manuf 84 (2016), 266–280, 10.1016/j.compositesa.2016.02.009.
Al-Ketan, O., Adel Assad, M., Abu Al-Rub, R.K., Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures. Compos Struct 176 (2017), 9–19, 10.1016/j.compstruct.2017.05.026.
Al-Ketan, O., Soliman, A., AlQubaisi, A.M., Abu Al-Rub, R.K., Nature-inspired lightweight cellular Co-continuous composites with architected periodic gyroidal structures. Adv Eng Mater, 20, 2018, 10.1002/adem.201700549.
Miserez, A., Schneberk, T., Sun, C., Zok, F.W., Waite, J.H., The transition from stiff to compliant materials in squid beaks. Science 319 (2008), 1816–1819, 10.1126/science.1154117 80-.
Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., et al. Continuous liquid interface production of 3D objects. Science 347 (2015), 1349–1352, 10.1126/science.aaa2397 80-.
Zorzetto, L., Andena, L., Briatico-Vangosa, F., De Noni, L., Thomassin, J.M., Jérôme, C., et al. Properties and role of interfaces in multimaterial 3D printed composites. Sci Rep 10 (2020), 1–17, 10.1038/s41598-020-79230-0.
Dimas, L.S., Bratzel, G.H., Eylon, I., Buehler, M.J., Tough composites inspired by mineralized natural materials: computation, 3D printing, and testing. Adv Funct Mater 23 (2013), 4629–4638, 10.1002/adfm.201300215.
Dolinski, N.D., Callaway, E.B., Sample, C.S., Gockowski, L.F., Chavez, R., Page, Z.A., et al. Tough multimaterial interfaces through wavelength-selective 3D printing. ACS Appl Mater Interfaces 13 (2021), 22065–22072, 10.1021/acsami.1c06062.
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., et al. Grayscale digital light processing 3D printing for highly functionally graded materials. Sci Adv 5 (2019), 1–10, 10.1126/sciadv.aav5790.
Liu, F., Li, T., Jiang, X., Jia, Z., Xu, Z., Wang, L., The effect of material mixing on interfacial stiffness and strength of multi-material additive manufacturing. Addit Manuf, 36, 2020, 10.1016/j.addma.2020.101502.
Mueller, J., Shea, K., Daraio, C., Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design. Mater Des 86 (2015), 902–912, 10.1016/j.matdes.2015.07.129.
Mueller, J., Courty, D., Spielhofer, M., Spolenak, R., Shea, K., Mechanical properties of interfaces in inkjet 3D printed single- and multi-material parts. 3D Print Addit Manuf, 4, 2017, 10.1089/3dp.2017.0038 193–9.
Ge, Q., Dunn, C.K., Qi, H.J., Dunn, M.L., Active origami by 4D printing. Smart Mater Struct, 23, 2014, 10.1088/0964-1726/23/9/094007.
Yuan, C., Wang, F., Rosen, D.W., Ge, Q., Voxel design of additively manufactured digital material with customized thermomechanical properties. Mater Des, 197, 2021, 10.1016/j.matdes.2020.109205.
Zhang, P., Heyne, M.A., To, A.C., Biomimetic staggered composites with highly enhanced energy dissipation: modeling, 3D printing, and testing. J Mech Phys Solid 83 (2015), 285–300, 10.1016/j.jmps.2015.06.015.
Zorzetto, L., Ruffoni, D., Re-entrant inclusions in cellular solids: from defects to reinforcements. Compos Struct 176 (2017), 195–204, 10.1016/j.compstruct.2017.05.039.
Li, T., Chen, Y., Wang, L., Enhanced fracture toughness in architected interpenetrating phase composites by 3D printing. Compos Sci Technol 167 (2018), 251–259, 10.1016/j.compscitech.2018.08.009.
Dickie, R.A., Heterogeneous polymer–polymer composites. I. Theory of viscoelastic properties and equivalent mechanical models. J Appl Polym Sci 17 (1973), 45–63, 10.1002/app.1973.070170104.
