Allan, M.L. & Philippacopoulos, A.J. 1999. Properties and performance of thermally conductivecement-basedgrouts for geothermal heat pumps. FY 99 Final Report.
Austin, W.A., Yavuzturk, C., Spitler, J.D. 2000. Development of an in-situ system for measureing ground thermal properties. ASHRAE Transactions. 106(1): 365-379.
Bennet, J., Claesson, J., Hellström, G. 1987. Multipole Method to Compute the Conductive Heat Transfer to and between Pipes in a Composite Cylinder. Notes on Heat Transfer 3. Lund: Lund Institute of Technology.
Carslaw, H.S. & Jaeger, J.C. 1959. Conduction of Heat in Solids, second edition. New York: Oxford University Press.
COMSOL 2012. COMSOL 4.2a, Multiphysics Modeling, Finite Element Analysis and Engineering Simulations Software, COMSOL, Inc., Burglington, MA.
Delaleux, F., Py, X., Olives R., Dominguez, A. 2012. Enhancement of geothermal borehole heat exchangers performances by improvement of bentonite grouts conductivity. Applied Thermal Engineering 33-34: 92-99.
Engineering Tool Box 2012. The engineering toolbox: Tools and basic information for design, engineering and construction of technical applications: Accessed on March 22, 2012, at http://www.engineeringtoolbox.com.
Gehlin, S. 2002. Doctoral Thesis: Thermal Response Test - Method, Development and Evaluation. Luleå: Luleå University of Technology.
GSHPA 2011. Guideline for closed loop vertical borehole heat exchanger design, installation and material standards. Milton Keynes: Ground source heat pump system association - National Energy Center.
Hakagerodur-geothermal 2012. Hakagerodour-geothermal: Handling book for borehole heat exchangers Technical details of geothermal pipes; Model: Geotherm PE-100. Accessed on March, 12, 2012 by email from Hakagerodour-geothermal AG.
Hellström, G. 1991. Ph.D. Thesis: Ground heat storage thermal analyses of duct storage systems, I. Theory. Lund: University of Lund.
Herrmann, V. J. 2008. Doctoral Thesis: Ingenieurgeologische Untersuchungen zur Hinterfüllung von Geothermie-Bohrungen mit Erdwärmesonden. Karlsruhe: Karlsruhe Institute of Technology (KIT).
Ingersoll, L. R., Zobel, O. J., Ingersoll, A. C. 1954. Heat Conduction with Engineering. Geological and Other Applications. New York: McGraw-Hill.
Jun, L., Xu, Z., Jun, G. and Jie Y. 2009. Evaluation of heat exchange rate of GHE in geothermal heat pump systems. Renewable Energy 34 (12): 2898-2904.
Lamarche, L., Kajl, S., Beauchamp, B. 2010. A review of methods to evaluate borehole thermal resistances in geothermal heat-pump systems. Geothermics 39: 187200.
Lee C., Lee K., Choi H., Choi H. P. 2010. Characteristics of thermally-enhanced bentonite grouts for geothermal heat exchanger in South Korea. Science China: Technological Sciences 53(1): 123-8.
Lee, C., Park, M., Nguyen, T., Sohn, B., Choi, J. M., Choi, H. 2011. Performance evaluation of closed-loop vertical ground heat exchangers by conducting in-situ thermal response tests. Renewable Energy 42: 77-83.
Molina-Giraldo, N., Bayer, P., Blum, P. Zhu, K., Fang, Z. 2010. A moving finite line source model to simulate borehole heat exchangers with groundwater advection. International Journal of Thermal Sciences 50: 2506-2513.
Paul, N.D. 1996. M. Sc. Thesis: The Effect of Grout Thermal Conductivity on Vertical Geothermal Heat Exchanger Design and Performance. Vermillion, SD: South Dakota University
Reuß, M., Proell, M., Koenigsdorff, R. 2011. Quality control of borehole heat exchanger systems. Espoo: IEA ECES Annex 21 meeting.
Roussel, N. & Le Roy, R. 2005. The Marsh cone: a test or a rheological apparatus?. Cement and Concrete Research 35(5): 823-830.
