Bladed rail; High modal density; Lightly damped structure
Résumé :
[en] Although simple and effective, the performance of passive control techniques is limited in terms of authority and robustness. This paper studies the potential of using an active control system for mitigating the vibrations of a bladed rail assembly. First, we discuss the optimal placement of the piezoelectric patches. Although locating the patches at the blade root maximizes the strain energy, it results in important perturbations of the aerodynamic flow. Therefore, a pair of sensor and actuator is placed inside the bladed rail in order to have an as large as possible electromechanical coupling and a collocated system, i.e., alternating pole and zero. Second, an active control strategy using an integrator is designed and assessed in terms of attained closed-loop damping. The performance of the active damping is eventually compared with that of classical piezoelectric shunt damping.
Griffin, J. H. A review of friction damping of turbine blade vibration, International Journal of Turbo and Jet Engines, 7 (3-4), 297-308, (1990).
Laxalde, D., Thouverez, F. and Lombard, J.-P. Forced response analysis of integrally bladed disks with friction ring dampers, Journal of Vibration and Acoustics, 132 (1), 011013, (2010).
Laxalde, D., Gibert, C. and Thouverez, F. Experimental and numerical investigations of friction rings damping of blisks, ASME Turbo Expo 2008: Power for Land, Sea, and Air, pp. 469-479, American Society of Mechanical Engineers Digital Collection, (2008).
Firrone, C. M., Allara, M. and Gola, M. M. A contact model for nonlinear forced response prediction of turbine blades: Calculation techniques and experimental comparison, ASME Turbo Expo 2008: Power for Land, Sea, and Air, pp. 573-582, American Society of Mechanical Engineers Digital Collection, (2008).
Hagood, N. W. and von Flotow, A. Damping of structural vibrations with piezoelectric materials and passive electrical networks, Journal of Sound and Vibration, 146 (2), 243-268, (1991).
Schwarzendahl, S. M., Szwedowicz, J., Neubauer, M., Panning, L. and Wallaschek, J. On blade damping technology using passive piezoelectric dampers, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, pp. 1205-1215, American Society of Mechanical Engineers Digital Collection, (2012).
Mokrani, B., Bastaits, R., Horodinca, M., Romanescu, I., Burda, I., Viguié, R. and Preumont, A. Parallel piezoelectric shunt damping of rotationally periodic structures, Advances in Materials Science and Engineering, 2015, (2015).
Tang, J. and Wang, K. Vibration control of rotationally periodic structures using passive piezoelectric shunt networks and active compensation, (1999).
Kauffman, J. and Lesieutre, G. Vibration reduction of turbomachinery bladed disks with changing dynamics using piezoelectric materials, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 19th AIAA/ASME/AHS Adaptive Structures Conference 13t, p. 2003, (2011).
Hohl, A., Neubauer, M., Schwarzendahl, S., Panning, L. and Wallaschek, J. Active and semiactive vibration damping of turbine blades with piezoceramics, Active and Passive Smart Structures and Integrated Systems 2009, vol. 7288, p. 72881H, International Society for Optics and Photonics, (2009).
Remington, P., Sutliff, D. and Sommerfeldt, S. Active control of low-speed fan tonal noise using actuators mounted in stator vanes: part 1 control system design and implementation, 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, p. 3190, (2003).
Duffy, K. P., Choi, B. B., Provenza, A. J., Min, J. B. and Kray, N. Active piezoelectric vibration control of subscale composite fan blades, Journal of Engineering for Gas Turbines and Power, 135 (1), 011601, (2013).
Balas, M. J. Direct velocity feedback control of large space structures, Journal of Guidance and Control, 2 (3), 252-253, (1979).
Preumont, A., Dufour, J.-P. and Malekian, C. Active damping by a local force feedback with piezoelectric actuators, Journal of guidance, control, and dynamics, 15 (2), 390-395, (1992).
Fleming, A., Behrens, S. and Moheimani, S. A new approach to piezoelectric shunt damping, Proc. Int. Symp. Smart Structures and Microsystems, (2000).
Goh, C. J., Analysis and control of quasi distributed parameter systems, Ph.D. thesis, California Institute of Technology, (1983).
Fenik, Š. and Starek, L. Optimal ppf controller for multimodal vibration suppression, Engineering Mechanics, 15 (3), 153-173, (2008).
Paknejad, A., Zhao, G., Osée, M., Deraemaeker, A., Robert, F. and Collette, C. A novel design of positive position feedback controller based on maximum damping and h 2 optimization, Journal of Vibration and Control, p. 1077546319892755, (2020).
Zhao, G., Paknejad, A., Raze, G., Deraemaeker, A., Kerschen, G. and Collette, C. Nonlinear positive position feedback control for mitigation of nonlinear vibrations, Mechanical systems and signal processing, 132, 457-470, (2019).
Mokrani, B., Piezoelectric shunt damping of rotationally periodic structures, Ph.D. thesis, Ph. D. Thesis, Université Libre de Bruxelles, Active Structures Laboratory, (2015).
Preumont, A., Vibration control of active structures: an introduction, vol. 246, Springer (2018).
