G. S. Wright et al., "The JWST MIRI instrument concept, " Proc. SPIE 5487, 653-663 (2004).
M. Sauvage et al., "The science case and data processing strategy for the thinned aperture light collector (TALC): A project for a 20 m far-infrared space telescope, " Proc. SPIE 9143, 91431B (2014).
G. Durand et al., "TALC: A new deployable concept for a 20 m far-infrared space telescope, " Proc. SPIE 9143, 91431A (2014).
M. Sauvage et al., "A development roadmap for critical technologies needed for TALC: A deployable 20 m annular space telescope, " Proc. SPIE 9904, 99041L (2016).
P. Rausch, S. Verpoort, and U. Wittrock, "Unimorph piezoelectric deformable mirrors for space telescopes, " Proc. SPIE 9904, 990468 (2016).
J. H. Crocker, "Fixing the Hubble space telescope, " Proc. SPIE 1494, 2-8 (1991).
A. J. Bronowicki and J. W. Innis, "A family of full spacecraft-to-payload isolators, " Technol. Rev. J 13, 21-41 (2005).
Q. Hu, Y. Jia, and S. Xu, "Adaptive suppression of linear structural vibration using control moment gyroscopes, " J. Guidance Control Dyn. 37(3), 990-996 (2014).
Y. Takei et al., "Vibration isolation system for cryocoolers of soft x-ray spectrometer on-board ASTRO-H (Hitomi), " J. Astron. Telesc. Instrum. Syst. 4(1), 1-10 (2018).
D. G. MacMartin and H. A. Thompson, "Vibration budget for observatory equipment, " J. Astron. Telesc. Instrum. Syst. 1(3), 034005 (2015).
D. Kamesh, R. Pandiyan, and A. Ghosal, "Passive vibration isolation of reaction wheel disturbances using a low frequency flexible space platform, " J. Sound Vib. 331(6), 1310-1330 (2012).
L. P. Davis et al., Hubble Space Telescope Reaction Wheel Assembly Vibration Isolation System, vol. 9, NASA Marshall Space Flight Center, Huntsville, Alabama (1986).
A. J. Bronowicki, "Vibration isolator for large space telescopes, " J. Spacecr. Rockets 43(1), 45-53 (2006).
J. Yang et al., "Design of a vibration isolation system for the space telescope, " J. Guidance Control Dyn. 38(12), 2441-2448 (2015).
S. N. Sayapin and Y. N. Artemenko, Intelligence System for Active Vibration Isolation and Pointing of Ultrahigh-Precision Large Space Structures in Real Time, pp. 103-115, Springer International Publishing, Cham (2016).
Y. Zhang and X. Guan, "Active damping control of flexible appendages for spacecraft, " Aerosp. Sci. Technol. 75, 237-244 (2018).
H. Shi et al., "An active control strategy to suppress nonlinear vibrations of large space membranes, " Acta Astronaut. 155, 80-89 (2019).
R. G. Cobb et al., "Vibration isolation and suppression system for precision payloads in space, " Smart Mater. Struct. 8(6), 798-812 (1999).
R. Nan et al., "Adaptive cable-mesh reflector for the FAST, " Acta Astronomica Sinica 44(2), 13-18 (2003).
C. Collette et al., "An active control concept for the talc space telescope, " Mech. Ind. 18(5), 510 (2017).
N. Devaney et al., "Development of a prototype active optics system for future space telescopes, " Appl. Opt. 57(22), E101-E106 (2018).
H. Wang, "Analytical analysis of a beam flexural-mode piezoelectric actuator for deformable mirrors, " J. Astron. Telesc. Instrum. Syst. 1(4), 049001 (2015).
C. Collette, "Usure ondulatoire en transport ferroviaire: mécanismes et reduction, " PhD thesis, Université libre de Bruxelles, Brussels, Belgium (2007).
M. C. Bampton and R. R. Craig Jr., "Coupling of substructures for dynamic analyses, " AIAA J. 6(7), 1313-1319 (1968).
S. Chesné, A. Milhomem, and C. Collette, "Enhanced damping of flexible structures using force feedback, " J. Guidance Control Dyn. 39(7), 1654-1658 (2016).
