Bahman, A.M., Ziviani, D., Groll, E.A., Development and validation of a mechanistic vapor-compression cycle model. International Refrigeration and Air-Conditioning Conference at Purdue University, 2018.
Behnel, S., Bradshaw, R., Citro, C., Dalcin, L., Seljebotn, D., Smith, K., Cython: the best of both worlds. Comput. Sci. Eng. 13:2 (2011), 31–39, 10.1109/MCSE.2010.118.
Bein, T.W., Hamilton, J.F., Computer modeling of an oil flooded single screw air compressor. 1982 International Compressor Engineering Conference at Purdue University, 1982, 127–134.
Bell, I., Theoretical and Experimental Analysis of Liquid Flooded Compression in Scroll Compressors, 2011, Purdue University.
Bell, I.H., Groll, E.A., Braun, J.E., Horton, W.T., A computationally efficient hybrid leakage model for positive displacement compressors and expanders. Int. J. Refrig., 2013, 10.1016/j.ijrefrig.2013.01.005.
Bell, I.H., Groll, E.A., Braun J., E., Horton, W.T., Simulation of a cold climate heat pump furnished with a scroll compressors with multiple vapor injection llines. Proceedings of 8th International Conference on Compressors and their Systems, City University of London, 2013, 87–101.
Bell, I.H., Groll, E.A., Braun J., E., Horton, W.T., Lemort, V., Comprehensive analytic solutions for the geometry of symmetric constant-wall-thickness scroll machines. Int. J. Refrig. 45 (2014), 223–242.
Bell, I.H., Lemort, V., Groll, E.A., Braun, J.E., King, G.B., Horton, T.W., Liquid-flooded compression and expansion in scroll machines - Part II: experimental testing and model validation. Int. J. Refrig. 35 (2012), 1890–1900.
Bell, I.H., Wronski, J., Quoilin, S., Lemort, V., Pure and pseudo-pure fluid thermophysical property evaluation and the open-Source thermophysical property library coolprop. Ind. Eng. Chem. Res. 53:6 (2014), 2498–2508, 10.1021/ie4033999.
Bell, I.H., Ziviani, D., Lemort, V., Bradshaw, C.R., Mathison, M.M., Groll, E.A., Braun, J.E., Horton, W.T., PDSim: a general quasi-steady modeling approach for positive displacement compressors and expanders. Int. J. Refrig., 2019, 10.1016/j.ijrefrig.2019.09.002 In Press.
Bianchi, G., JKennedy, S., Zaher, O., Tassou, S.A., Miller, J., Jouhara, H., Numerical modeling of a two-phase twin-screw expander for trilateral flash cycle applications., 88, 2018, 248–259.
Bradshaw, C.R., Groll, E.A., A comprehensive model of a novel rotating spool compressor. Int. J. Refrig. 36 (2013), 1974–1981.
Chan, C.Y., Haselden, G.G., Hundy, G., The hallscrew compressor for refrigeration and heat pump duties. Int. J. Refrig. 4 (1981), 275–280.
Chen, Y., Mathematical Modeling of Scroll Compressors, 2000, Purdue University.
Chen, Y., Halm, N., Groll, E., Braun, J., Mathematical modeling of scroll compressor. part I- compression process modeling. Int. J. Refrig. 25 (2002), 731–750.
Chen, Y., Halm, N., Groll, E., Braun, J., Mathematical modeling of scroll compressor. part II- overall scroll compressor modeling. Int. J. Refrig. 25 (2002), 751–764.
Damle, R., Rigola, J., Perez-Segarra, C.D., Castro, J., Oliva, A., Object-oriented ssimulation of reciprocating compressors: numerical verification and experimental comparison. Int. J. Refrig. 34 (2011), 1989–1998.
Dutra, T., Deschamps, C.J., A simulation approach for hermetic reciprocating compressors including elelectric motor modeling. Int. J. Refrig. 59 (2015), 168–181.
Gasche, J.L., Andreotti, T., Maia, C.R.M., A model to predict R134a refrigerant leakage through the radial clearance of rolling piston compressors. Int. J. Refrig. 35 (2012), 2223–2232.
Halm, N., Mathematical Modeling of Scroll Compressors, 1997, Purdue University.
Hamilton, J.F., Extension of Mathematical Modeling of Positive Displacement Type Compressors. 1974, Short Course Text in Ray Herrick Laboratories, School of Mechanical Engineering, Purdue University.
Hu, J., Yang, L., Shao, L.L., Zhang, C.L., Generic network model of reciprocating compressor. Int. J. Refrig. 45 (2014), 107–119.
Hugenroth, J., Liquid Flooded Ericsson Cycle Cooler, 2006, Purdue University.
Imran, M., Usman, M., B.-S., P., Lee, D.-H., Volumetric expander for low grade heat and waste heat recovery applications. Renew. Sustain. Energy Rev. 57 (2016), 1090–1109.
Incropera, F.P., Dewitt, D.P., Fundamentals of Heat and Mass Transfer (5th edition). 2002, Wiley.
Janicki, M., Modellierung und Simulation von Rotationsverdrängermaschinen. Ph.D. thesis, 2007.
Jovane, M., Modeling and Analysis of a Novel Rotary Compressor, 2007, Purdue University.
Kim, H., Roh, C.-g., Kim, J.-k., Shin, J.-m., Hwang, Y., Lee, J.-k., An experimental and numerical study on dynamic characteristic of linear compressor in refrigeration system. Int. J. Refrig. 32 (2009), 1536–1543.
Kim, J.-H., Analysis of a Bowtie Compressor with Novel Capacity Modulation, 2005, Purdue University.
Lee, S.-J., Shim, J., Kim, K.C., Development of capacity modulation compressor based on a two stage rotary compressor - part i: modeling and simulation of compressor perfromance. Int. J. Refrig. 54 (2015), 22–37.
Lemort, V., Contribution to the Characterization of Scroll Machines in Compressor and Expander Modes. Ph.D. thesis, 2008, University of Liège.
Lemort, V., Bell, I.H., Groll, E.A., Braun J., E., Analysis of liquid-flooded expansion using a scroll expander. 19th Compressor Engineering Conference at Purdue University, 2008 Paper 1323.
Li, G., Wu, Y., Zhang, Y., Zhi, R., Wang, J., Ma, C., Performance study on a single-Screw expander for a small-Scale pressure recovery system. Energies 10:6 (2017), 1–14.
Link, R., Deschamps, C.J., Numerical modeling of startup and shutdown transients in reciprocating compressors. Int. J. Refrig. 34 (2011), 1398–1414.
Liu, Z., Simulation of a Variable Speed Compressor with Special Attention to Supercharging Effects, 1994, Purdue University.
Macchi, E., Astolfi, M., (eds.) Organic Rankine Cycle (ORC) Power Systems, 2016, Woodhead Publishing Chapter 12 - Positive displacement expanders for Organic Rankine Cycle systems, Lemort, V., Legros, A., pp. 361–396.
van Male, J., Monoscrew - a newly developed refrigeration compressor. Int. J. Refrig. 1 (1978), 242–248.
Mathison, M.M., Braun, J.E., Groll, E.A., Modeling of a two-stage rotary compressor. HVAC&R Res. 14 (2008), 719–748.
Mathison, M.M., Braun, J.E., Groll, E.A., Modeling of a novel spool compressor with multiple vapor injection ports., 36, 2013, 1982–1997.
Mimmi, G., Pennacchi, P., Analytical model of a particular type of positive displacement blower., 213, 1999, 517–525.
Mimmi, G., Pennacchi, P., Compression load dynamics in a special helical blower: A Modeling improvement., 123, 2001, 402.
Mujic, E., Kovacevic, A., Stosic, N., Smith, I., Advanced Design Environment for Screw Machines. International Compressor Engineering Conference at Purdue. Paper 1971, 2010.
Nakai, H., ino, N., Hashimoto, H., Piston-ring lubrication problems for refrigeration compressors considering combined effects of supply oil quantity and surface roughness. J Tribol 118 (1996), 286–291.
Ooi, K., Wong, T., A computer simulation of a rotary compressor for household refrigerators. Appl. Therm. Eng. 17 (1997), 65–78.
Ooi, K.T., A real gas simulation of a refrigeration compressor and its performance comparison for CFCs and Non-CFCs. International Compressor Engineering Conference at Purdue, 1992, Paper 872.
Ooi, K.T., Chai, G.B., Kwek, E.C., A simple valve model to study the performance of a small compressor. International Compressor Engineering Conference at Purdue, 1992, Paper803.
Papes, I., Degroote, J., Vierendels, J., Development of a thermodynamic loworder model for a twin-screw expander with emphasis on pulsations in the inlet pipe. Appl. Therm. Eng. 103 (2016), 909–919.
Prankash, R., Singh, R., Mathematical Model and Simulation of Refrigerating Compressors. 1974 International Compressor Engineering Conference at Purdue University, 1974.
Soedel, W., Introduction to Computer Simulations of Positive Displacement type Compressors. 1972, Short Course Text in Ray Herrick Laboratories, School of Mechanical Engineering, Purdue University.
Soedel, W., Sound and Vibrations of Positive Displacement Compressors. 2007, CRC Press Taylor & Francis Group.
Stiaccini, I., Galoppi, G., Ferrari, L., A reciprocating compressor hybrid model with acoustic FEM characterization. Int. J. Refrig. 63 (2016), 171–183.
Stosic, N., Smith, I., Kovacevic, A., Screw Compressors - Mathematical Modelling and Performance Calculation. 2005, Springer.
Stosic, N., Smith, I.K., Kovacevic, A., Mujic, E., Review of mathematical models in performance calculation of screw compressors. Int. J. Fluid Mach. Syst. 4 (2011), 271–288.
Tang, Y., Computer Aided Design of Twin Screw Compressors, 1995.
Wang, Z., Wang, Z., Wang, J., Jiang, W., Feng, Q., Theoretical and experimental study on thermodynamic performance of single screw refrigeration compressor with multicolumn envelope meshing pair. Appl. Therm. Eng. 103 (2016), 139–149.
Wu, J., Chen, A., A new structure and theoretical analysis on leakage and performance of an oil-free R290 rolling piston compressor. Int. J. Refrig. 49 (2015), 110–118.
Yanagisawa, T., Shimizu, T., Friction losses in rolling piston type rotary compressors. III. Int. J. Refrig. 8:3 (1985), 159–165, 10.1016/0140-7007(85)90156-2.
Yanagisawa, T., Shimizu, T., Leakage losses with a rolling piston type rotary compressor. i. radial clearance on the rolling piston. Int. J. Refrig. 8:2 (1985), 75–84, 10.1016/0140-7007(85)90077-5.
Yanagisawa, T., Shimizu, T., Leakage losses with a rolling piston type rotary compressor. II. leakage losses through clearances on rolling piston faces. Int. J. Refrig. 8:3 (1985), 152–158, 10.1016/0140-7007(85)90155-0.
Yanagisawa, T., Shimizu, T., Chu, I., Ishijima, K., Motion analysis of rolling piston in rotary compressor. International Compressor Engineering Conference at Purdue, 1982, Paper 392.
Yang, B., Bradshaw, C.R., Groll, E.A., Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings. Int. J. Refrig. 36 (2013), 1925–1936.
Yang, B., Zhao, Y., Piston ring-cylinder inline lubrication analysis in a CO2 refrigeration reciprocating compressor. Inst. of Mech. Eng., Part C: J. Mech. Eng. Sci. 225 (2013), 2638–2648.
Yang, B., Ziviani, D., Groll, E., Comprehensive model of an hermetic reciprocating compressor. IOP Conf. Ser.: Mater. Sci. Eng. 232:012007 (2017), 1–10, 10.1088/1757-899X/232/1/012007.
Zhang, H., Wu, J., Xie, F., Chen, A., Li, Y., Dynamic behaviors of the crankshafts in single-cylinder and twin-cylinder rotary compressors. Int. J. Refrig. 47 (2014), 36–45.
Zhang, X., Ziviani, D., Groll, E.A., Braun, J.E., A numerical study on dynamic characteristics of linear compressor for electronics cooling. 8th International Conference on Compressors and Refrigeration (ICCR), Xi'an Jiaotong University, 2017 F22.
Zhelezny, V.P., Nichenko, S.V., Semenyuk, Y.V., Kosoy, B.V., Kumar, R., Influence of compressor oil admixtures on theoretical efficiency of a compressor system. Int. J. Refrig. 32 (2009), 1526–1535.
Zhelezny, V.P., Sechenyh, V.V., Semenyuk, Y.V., Grebenkov, A.J., Beliayeva, O.V., An experimental investigation and modelling of the viscosity refrigerant/oil solutions. Int. J. Refrig. 32 (2009), 1389–1395.
Zheleznya, V., Semenyuka, Y., Ancherbaka, S., Grebenkovb, A., Beliayevab, O., An experimental investigation and modelling of the solubility, density and surface tension of 1,1,1,3,3-pentafluoropropane (r-245fa)/synthetic polyolester compressor oil solutions. J. Fluor Chem., 128, 2007, 10291038.
Zhou, W., Kim., J., Soedel, W., New iterative scheme in computer simulation of positive displacement compressors considering the effect of gas pulsations. J. Mech. Des. 123 (2001), 282–288.
Ziviani, D., Theoretical and Experimental Characterization of Single-Screw Expanders for ORC Applications, 2017.
Ziviani, D., De Paepe, M., Braun, J.E., Groll, E.A., Detailed Thermal Model of Open-Drive Single-Screw Expanders for ORC Applications. International Compressor Engineering Conference at Purdue University, 2018.
Ziviani, D., Groll, E.A., Modeling and analysis of an open-drive Z-compressor. IOP Conf. Ser.: Mater. Sci. Eng. 232:012062 (2017), 1–10, 10.1088/1757-899X/232/1/012062.
Ziviani, D., Groll, E., Braun, J., De Paepe, M., Review and update on the geometry modeling of single-screw machines with emphasis on expanders. Int. J. Refrig. 92 (2018), 10–26.
Ziviani, D., Groll, E., Braun, J., Horton, W., De Peape, M., van den Broek, M., Non-symmetric approach to single-screw expander and compressor modeling. IOP Conf. Ser.: Mater. Sci. Eng., 232(012076), 2017.
Ziviani, D., Sergei, S., Lecompte, S., Groll, E.A., Braun, J.E., Horton, W.T., van den Broek, M., De Paepe, M., Characterizing the performance of a single-screw expander in a small-scale organic rankine cycle for waste heat recovery. Appl. Energy 181 (2016), 155–170.
