Kelvin probe force microscopy (KPFM); Stainless steel fibres; Polyester fibres; Surface electrical potential; Surface charge; Charge and discharge mechanisms
Abstract :
[en] Charge transfer processes between polyester and conductive fibre surfaces is studied using Kelvin probe force microscopy (KPFM). Three model systems are considered: a single isolated insulating polyester fibre, two conductive stainless steel fibres in galvanic or non-galvanic contact and an insulating polyester fibre in galvanic contact with a conductive stainless steel fibre. For first and third configurations, a two-stage process with two different time constants is observed corresponding to two mechanisms responsible for the charge transfer. For the second configuration, a single-stage process is observed. The presence of the conductive fibre facilitates the charge transfer on the insulating fibre.
Disciplines :
Physics Electrical & electronics engineering
Author, co-author :
Yin, Jun; Université Catholique de Louvain - UCL > Institute of Condensed Matter and Nanosciences, Bio and Sof Matter
Vanderheyden, Benoît ; Université de Liège - ULiège > Dép. d'électric., électron. et informat. (Inst.Montefiore) > Electronique et microsystèmes
Nysten, Bernard; Université Catholique de Louvain - UCL > Institute of Condensed Matter and Nanosciences, Bio and Soft Matter
Language :
English
Title :
Dynamic charge transfer between polyester and conductive fibres by Kelvin probe force microscopy
scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.
Bibliography
Gibson, N., Static electricity : an industrial hazard under control?. J. Electrost. 40–41 (1997), 21–30, 10.1016/S0304-3886(97)00010-7.
Glor, M., Electrostatic ignition hazards in the process industry. J. Electrost. 63 (2005), 447–453, 10.1016/j.elstat.2005.03.001.
Schein, L.B., Recent progress and continuing puzzles in electrostatics. Science 316 (2007), 1572–1573.
Gibson, N., Lloyd, F.C., Incendivity of discharges from electrostatically charged plastics. Br. J. Appl. Phys. 16 (1965), 1619–1631, 10.1088/0508-3443/16/11/302.
Kathirgamanathan, P., Toohey, M.J., Haase, J., Holdstock, P., Laperre, J., Schmeer-Lioe, G., Measurements of incendivity of electrostatic discharges from textiles used in personal protective clothing. J. Electrost. 49 (2000), 51–70, 10.1016/S0304-3886(00)00003-6.
Salmela, H., Paasi, J., Kalliohaka, T., Fast, L., Measurements of air discharges from insulating, electrostatic dissipative and conductive materials with different ESD probes. J. Electrost. 63 (2005), 539–544, 10.1016/j.elstat.2005.03.025.
Gouveia, R.F., Costa, C.A.R., Galembeck, F., Electrostatic patterning of a silica surface: a new model for charge build-up on a dielectric solid. J. Phys. Chem. B 109 (2005), 4631–4637, 10.1021/jp0457601.
Chubb, J., Measurement of charge transfer in electrostatic discharges. J. Electrost. 64 (2006), 321–325, 10.1016/j.elstat.2005.08.003.
von Pidoll, U., An overview of standards concerning unwanted electrostatic discharges. J. Electrost. 67 (2009), 445–452, 10.1016/j.elstat.2009.01.011.
Boutaayamou, M., Lemaire, P., Vanderheyden, B., Vanderbemden, P., Design and fabrication of an electrode array sensor for probing the electric potential distribution at the mesoscopic scale in antistatic felts. Meas. Sci. Technol., 25, 2014, 075903, 10.1088/0957-0233/25/7/075903.
Herous, L., Remadnia, M., Kachi, M., Nemamcha, M., Decay of electrical charges on polyethylene terephthalate surface. J. Eng. Sci. Technol. Rev. 2 (2009), 87–90.
Tabti, B., Mekideche, M.R., Plopeanu, M.-C., Dumitran, L.M., Antoniu, A., Dascalescu, L., Factors that influence the decay rate of the potential at the surface of nonwoven fabrics after negative corona discharge deposition. IEEE Trans. Ind. Appl. 46 (2010), 1586–1592, 10.1109/tia.2010.2049626.
Ziari, Z., Sahli, S., Bellel, A., Surface potential and decay of low and density polyethylene and (LDPE) films under different corona and discharge conditions. Moroc. J. Condens. Matter 12 (2010), 218–222.
Mi, J., Du, S., Yuan, G., Study on both discharge and charging of the earthed atomizing corona discharge and the influence of magnetic fields on them. Curr. Appl. Phys. 12 (2012), 1005–1010, 10.1016/j.cap.2011.11.019.
Sonnonstine, T.J., Perlman, M.M., Surface-potential decay in insulators with field-dependent mobility and injection efficiency. J. Appl. Phys. 46 (1975), 3975–3981, 10.1063/1.322148.
Aragoneses, A., Mudarra, M., Belana, J., Diego, J., Study of dispersive mobility in polyimide by surface voltage decay measurements. Polymer 49 (2008), 2440–2443, 10.1016/j.polymer.2008.03.037.
Chen, G., A new model for surface potential decay of corona-charged polymers. J. Phys. D Appl. Phys., 43, 2010, 055405, 10.1088/0022-3727/43/5/055405.
Burgo, T.A.L., Ducati, T.R.D., Francisco, K.R., Clinckspoor, K.J., Galembeck, F., Galembeck, S.E., Triboelectricity: macroscopic charge patterns formed by self-arraying ions on polymer surfaces. Langmuir 28 (2012), 7407–7416, 10.1021/la301228j.
Burgo, T.A.L., Erdemir, A., Bipolar tribocharging signal during friction force fluctuations at metal-insulator interfaces. Angew. Chem. Int. Ed. 53 (2014), 12101–12105, 10.1002/anie.201406541.
Soares, L.C., Bertazzo, S., Burgo, T.A.L., Baldim, V., Galembeck, F., A new mechanism for the electrostatic charge build-up and dissipation in dielectrics. J. Braz. Chem. Soc. 19 (2008), 277–286, 10.1590/s0103-50532008000200012.
Cunningham, S., Dynamical studies of the single point contact electrification of inorganic and polymer substrates. J. Electrost. 40–41 (1997), 225–230, 10.1016/s0304-3886(97)00041-7.
Castle, G.S.P., Schein, L.B., General model of sphere-sphere insulator contact electrification. J. Electrost. 36 (1995), 165–173, 10.1016/0304-3886(95)00043-7.
Cornet, N., Goeuriot, D., Guerret-Piécourt, C., Juvé D., Tréheux, D., Touzin, M., Fitting, H.-J., Electron beam charging of insulators with surface layer and leakage currents. J. Appl. Phys., 103, 2008, 064110, 10.1063/1.2890427.
Touzin, M., Goeuriot, D., Guerret-Piécourt, C., Juvé D., Tréheux, D., Fitting, H.-J., Electron beam charging of insulators: a self-consistent flight-drift model. J. Appl. Phys., 99, 2006, 114110, 10.1063/1.2201851.
Kotera, M., Matsumoto, Y., Time dependent charging of insulators by electron beam irradiation. Microsc. Microanal. 11 (2005), 1690–1691, 10.1017/s1431927605504379.
Kalliohaka, T., Paasi, J., Lemaire, P., Forced corona method for the evaluation of fabrics with conductive fibres. J. Electrost. 63 (2005), 583–588, 10.1016/j.elstat.2005.03.020.
Rezende, C.A., Gouveia, R.F., da Silva, M.A., Galembeck, F., Detection of charge distributions in insulator surfaces. J. Phys. Condens. Matter, 21, 2009, 263002, 10.1088/0953-8984/21/26/263002.
Blaise, G., Charge localization and transport in disordered and dielectric materials. J. Electrost. 50 (2001), 69–89, 10.1016/s0304-3886(00)00027-9.
Mandler, D., Unwin, P.R., Measurement of lateral charge propagation in polyaniline layers with the scanning electrochemical microscope. J. Phys. Chem. B 107 (2003), 407–410, 10.1021/jp021623x.
Nonnenmacher, M., O'Boyle, M.P., Wickramasinghe, H.K., Kelvin probe force microscopy. Appl. Phys. Lett. 58 (1991), 2921–2923, 10.1063/1.105227.
Palermo, V., Palma, M., Samorì P., Electronic characterization of organic thin films by Kelvin probe force microscopy. Adv. Mater. 18 (2006), 145–164, 10.1002/adma.200501394.
Knorr, N., Vinzelberg, S., Charge writing and detection by EFM and KPFM scanning probe techniques. Microsc. Anal., 26, 2012, 6.
Ishii, M., Static states and dynamic behaviour of charges: observation and control by scanning probe microscopy. J. Phys. Condens. Matter, 22, 2010, 173001, 10.1088/0953-8984/22/17/173001.
Magonov, S., Alexander, J., Single-pass Kelvin force microscopy and dC/dZ measurements in the intermittent contact: applications to polymer materials. Beilstein J. Nanotechnol. 2 (2011), 15–27, 10.3762/bjnano.2.2.
Palleau, E., Ressier, L., Borowik, L., Mélin, T., Numerical simulations for a quantitative analysis of AFM electrostatic nanopatterning on PMMA by Kelvin force microscopy. Nanotechnology, 21, 2010, 225706, 10.1088/0957-4484/21/22/225706.
Belarni, A., Lamhamdi, M., Pons, P., Boudou, L., Guastavino, J., Segui, Y., Kelvin probe microscopy for reliability investigation of RF-MEMS Capacitive Switches. Microelectron. Reliab. 48 (2008), 1232–1236, 10.1016/j.microrel.2008.07.046.
Shao, R., Nikiforov, M.P., Bonnell, D.A., Photoinduced charge dynamics on batio3 (001) surface characterized by scanning probe microscopy. Appl. Phys. Lett., 89, 2006, 112904, 10.1063/1.2348776.
Morita, S., Sugawara, Y., Microscopic contact charging and dissipation. Thin Solid Films 393 (2001), 310–318, 10.1016/S0040-6090(01)01102-6.
Knorr, N., Wirtz, R., Rosselli, S., Nelles, G., Field-absorbed water and induced electrochemical and processes in organic and thin film and junctions. J. Phys. Chem. C 114 (2010), 15791–15796, 10.1021/jp103625w.
Similar publications
Sorry the service is unavailable at the moment. Please try again later.
This website uses cookies to improve user experience. Read more
Save & Close
Accept all
Decline all
Show detailsHide details
Cookie declaration
About cookies
Strictly necessary
Performance
Strictly necessary cookies allow core website functionality such as user login and account management. The website cannot be used properly without strictly necessary cookies.
This cookie is used by Cookie-Script.com service to remember visitor cookie consent preferences. It is necessary for Cookie-Script.com cookie banner to work properly.
Performance cookies are used to see how visitors use the website, eg. analytics cookies. Those cookies cannot be used to directly identify a certain visitor.
Used to store the attribution information, the referrer initially used to visit the website
Cookies are small text files that are placed on your computer by websites that you visit. Websites use cookies to help users navigate efficiently and perform certain functions. Cookies that are required for the website to operate properly are allowed to be set without your permission. All other cookies need to be approved before they can be set in the browser.
You can change your consent to cookie usage at any time on our Privacy Policy page.
