Study of the effect of amino-functionalized multiwall carbon nanotubes on dry sliding wear resistance properties of carbon fiber reinforced thermoset polymers

Pincheira, G.; Montalba, C.; Gacitua, W.; Montrieux, Henri-Michel; Lecomte-Beckers, Jacqueline; Meléndrez, M.F.; Flores, P.

doi:10.1007/s00289-016-1608-4

Article (Scientific journals)

Study of the effect of amino-functionalized multiwall carbon nanotubes on dry sliding wear resistance properties of carbon fiber reinforced thermoset polymers

Pincheira, G.; Montalba, C.; Gacitua, W. et al.

2016 • In Polymer Bulletin

Peer Reviewed verified by ORBi

Permalink
https://hdl.handle.net/2268/194307

DOI
10.1007/s00289-016-1608-4

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

pincheira2016.pdf

Publisher postprint (1.8 MB)

Download

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Multiwall carbon nanotubes; Fiber reinforced composites; Mechanical testing; Wear resistance; LIMARC

Abstract :

[en] This work investigates the effect of multiwall carbon nanotubes (MWCNTs) on the mechanical and tribological behavior of a fiber reinforced composite (FRC). Fiber reinforced composites and nano-engineered FRCs are manufactured by resin transfer molding. In-plane tensile tests, in-plane shear tests and through-thickness compression tests are used to assess the influence of MWCNTs on the material mechanical behavior. Pin on disk dry sliding tests are used to quantify the effect of MWCNTs on the friction coefficient and the specific wear rate. It was determined that (1) MWCNTs have an influence on the improvement on both the through-thickness compression strength and the specific wear rate, and (2) they do not influence the material stiffness, in-plane tensile and shear strengths and the friction coefficient. It is assumed that the observed improvements are due to the demonstrated positive influence of the MWCNTs effect on the matrix/reinforcement interfacial strength and on the matrix fracture toughness.

Disciplines :

Materials science & engineering
Mechanical engineering

Author, co-author :

Pincheira, G.

Montalba, C.

Gacitua, W.

Montrieux, Henri-Michel ; Université de Liège > Département d'aérospatiale et mécanique > Science des matériaux métalliques

Lecomte-Beckers, Jacqueline ; Université de Liège > Département d'aérospatiale et mécanique > Science des matériaux métalliques

Meléndrez, M.F.

Flores, P.

Language :

English

Title :

Study of the effect of amino-functionalized multiwall carbon nanotubes on dry sliding wear resistance properties of carbon fiber reinforced thermoset polymers

Publication date :

22 January 2016

Journal title :

Polymer Bulletin

ISSN :

0170-0839

eISSN :

1436-2449

Publisher :

Springer Science & Business Media B.V., New York, United States - New York

Peer reviewed :

Peer Reviewed verified by ORBi

Available on ORBi :

since 06 March 2016

Statistics

Number of views

60 (8 by ULiège)

Number of downloads

218 (3 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

Bibliography

Wu J, Cheng XH (2009) The tribological properties of Kevlar pulp reinforced epoxy composites under dry sliding and water lubricated condition. Wear 26:1293–1297
Suresha B, Kunigal Shiva Kumar, Seetharamu S, Sampath Kumaran P (2010) Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites. Tribol Int 43:602–609
Kim BC, Lee DG (2009) Development of a spherical bearing with uni-directional carbon/epoxy composite. Compos Struct 89:102–109
Park DC, Lee SM, Kim BC, Kim HS, Lee DG (2006) Development of heavy-duty hybrid carbon-phenolic hemispherical bearings. Compos Struct 73:88–98
Yu HN, Kim SS, Lee DG (2009) Optimum design of aramid-phenolic/glass-phenolic composite journal bearings. Compos Part A 40:1186–1191
Kim SS, You HN, Hwang IU, Lee DG (2009) Development of the carbon/phenolic composite shoulder bearing. Compos Struct 88:26–32
Larsen TO, Andersen TL, Thorning B, Vigild ME (2006) The effect of particle addition and fibrous reinforcement on epoxy-matrix composites for severe sliding conditions. Wear 264:857–868
Su F, Zhang Z, Liu W (2006) Mechanical and tribological properties of carbon fabric composites filled with several nano-particles. Wear 260:861–868
Suresha B, Kishore S, Seetharamu S, Kumaran PS (2009) Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites. Wear 267:1405–1414
Lee GY, Dharan CKH, Ritchie RO (2002) A physically-based abrasive wear model for composite materials. Wear 252:322–331
Lv P, Feng Y, Zhang P, Chen H, Zhao N, Feng (2011) W. Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers. Carbon 49:4665–4673
Sager RJ, Klein PJ, Lagoudas DC, Zhang Q, Liu J, Dai L, Baur JW (2009) Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix. Compos Sci Technol 69:898–904
An F, Lu C, Li Y, Guo J, Lu X, Lu H, He S, Yang Y (2012) Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite. Mater Des 33:197–202
Li M, Gu Y, Liu Y, Li Y, Zhang Z (2013) Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers. Carbon 52:109–221
Godara A, Gorbatikh L, Kalinka G, Warrier A, Rochez O, Mezzo L, Luizi F, van Vuure AW, Lomov SV, Verpoest I (2010) Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes. Compos Sci Technol 70:1346–1352
Chandrasekaran VCS, Advani SG, Santare MH (2010) Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites. Carbon 48:3692–3699
Yang L, He X, Mei L, Tong L, Wang R, Li Y (2012) Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers. Compos Part A 43:1410–1418
Chandrasekaran VCS, Advani SG, Santare MH (2011) Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites. Compos Part A 42:1007–1016
Gojny F, Wichmann MHG, Fiedler B, Schulte K (2005) Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—a comparative study. Compos Sci Technol 65:2300–2313
Tang Y, Ye L, Zhang Z, Friederich K (2013) Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles—a review. Compos Sci Technol 86:26–37
Godara A, Mezzo L, Luizi F, Warrier A, Lomov SV, Van Vuure AW, Gorbatikh L, Moldenaers P, Verpoest I (2009) Influence of carbon nanotube reinforcement on the processing and the mechanical behavior of carbon fiber/epoxy composites. Carbon 47:2914–2923
Karapappas P, Vavouliotis A, Tsotra P, Kostopoulos V, Paipetis A (2009) Enhanced fracture properties of carbon reinforced composites by the addition of multi-wall carbon nanotubes. J Compos Mater 43:977–985
Lee SH, Kim H, Hang S, Cheong SK (2012) Interlaminar fracture toughness of composites laminates with CNT-enhanced nonwoven carbon tissue interleave. Compos Sci Technol 73:1–8
Mujika F, Vargas G, Ibarretxe J, De Gracia J, Arrese A (2012) Influence of the modification with MWCNT on the interlaminar fracture properties of long carbon fiber composites. Compos Part B 43:1336–1340
Jacobs O, Schäbel B (2008) Wear behavior of carbon nanotube-reinforced polyethylene and epoxy composites. In: Friederich K, Schlarb AK (eds) Tribology of polymeric nanocomposites. In: Briscoe BJ (ed) Tribology and Interface Engineering Series, vol 55. Elsevier, UK, pp 209–242
Cui LJ, Geng HZ, Wang WY, Chen LT, Gao J (2013) Functionalization of multi-wall carbon nanotubes to reduce the coefficient of friction and improve the wear resistance of multi-wall carbon nanotube/epoxy composites. Carbon 54:277–282
Jiménez-Suárez A, Campo M, Sánchez M, Romón C, Ureña A (2012) Influence of the functionalization of carbon nanotubes on calendaring dispersion effectiveness in a low viscosity resin for VARIM processes. Compos Part B 43:3482–3490
Aguilar-Ventura I, Lubineau G (2013) The effect of bulk-resin CNT-enrichment on damage and plasticity in shear-loaded laminated composites. Compos Sci Technol 84:23–30
Kim BC, Park DC, Kim BJ, Lee DG (2010) Through-thickness compressive strength of a carbon/epoxy composite laminate. Compos Struct 92:480–497
De Greef N, Gorbatikh L, Godara A, Mezzo L, Lomov S, Verpoest I (2011) The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites. Carbon 49:4650–4664
Fernández C, Medina C, Pincheira G, Canales C, Flores P (2013) The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy fiber reinforced composites. Compos Part B 55:421–425
Gonzalez C, Llorca J (2007) Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: microscopic mechanisms and modeling. Compos Sci Technol 67:2795–2806
Medina C, Molina-Aldareguía J, González C, Melendrez M, Flores P, Llorca J (2015) Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. J Compos Mater. doi:10.1177/0021998315595115