Grant C., "Automated processes for composite aircraft structure", Industrial Robot, 33(2), pp. 117-121 (2006).
Blom A.W., Stickler P;B., and Gurdal Z., "Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction", Composites: Part B, 41, pp. 157-16 (2010).
Van West B.P., Pipes R.B., Keefe M., "A simulation of the draping of bidirectional fabrics over arbitrary surfaces", Journal of the textile Institute, 81(4), pp. 448-460 (1990).
Wang J., Paton R., Page J.R., "The draping of woven fabric performs for production of polymer composite components", Composites: Part A, 30, pp. 757-765 (1999).
Dong L., Lekakou C., Bader M.G., "Solid-mechanics finite element simulations of the draping of fabrics: A sensitivity analysis", Composites: Part A, 31, pp. 639-652 (2000).
Potter K. "Beyond the pin-jointed net: maximizing the deformability of aligned continuous fiber reinforcements", Composite Part A, 33, pp. 677-686 (2002).
Tatting B., and Gurdal Z., "Design and manufacture of elastically tailored tow placed plates", NASA/CR-2002-211919 (2002).
Hyer M., Charette R., "The use of curvilinear fiber format in composite structures design", Proceedings of the 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and materials (SDM) Conference, New York, NY, paper 1404 (1989).
Gurdal Z., Olmedo R., "In-plane response of laminates with spatially varying fiber orientations: variable stiffness concept", AIAA Journal, 31(4), pp. 751-758 (1993).
Tatting, B. F., Gurdal, Z., "Design and Manufacture of Tow-placed Variable Stiffness Composite Laminates with Manufacturing Considerations", Proceedings of the 13th U.S. National Congress of Applied Mechanics (USNCAM), Gainesville, FL, June 21-26 (1998).
Parnas L., Oral S., Ceyhan U., "Optimum design of composite structures with curved fiber courses", Composites Science and technology, 63, pp. 1071-1082 (2003).
Blom A.W., Tatting B.F., Hol J.M.A.M., Gurdal Z., "Fiber path definitions for elastically tailored conical shells", Composites: Part B, 40, pp. 77-84 (2009).
Shirinzadeh B., Cassidy G., Oetomo D., Alici G., and Ang M.H., "Trajectory generation for open-contoured structures in robotic fiber placement", Robotics and ComputerIntegrated Manufacturing, 23, pp. 380-394 (2007).
Waldhart, C. J., G̈urdal, Z., Ribbens, C., "Analysis of Tow-placed, Parallel Fiber, Variable Stiffness Laminates", Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials (SDM) Conference, Salt Lake City, UT, April 15-17, pp. 2210-2220 (1996).
Waldhart, "Analysis of tow-placed, variable-stiffness laminates", Master Thesis, Virginia Polytechnic Institute and State University, Blacksburg, USA (1996).
Sethian J.A., "Level-set methods and fast marching methods: evolving interfaces in computational fluid mechanics, computer vision, and materials science", Cambridge University Press (1999).
Zienkiewicz OC., "The finite element method", McGraw-Hill, New York. (1977).
Bruyneel M., and Zein S., "A modified Fast Marching Method for defining fiber placement trajectories over meshes", submitted to Computers & Structures.
