Grenestedt JL. Lay-up optimization of composite structures. PhD Thesis, Report 92-94, Royal Institute of Technology of Stockholm, Department of Lightweight Structures; 1992.
Miki M., and Sugiyama Y. Optimum design of laminated composite plates using lamination parameters. AIAA J 31 5 (1993) 921-922
Miki M. Design of laminated fibrous composite plates with required flexural stiffness. In: Vinson J, Taya M, editors. Recent advances in composites in the United States and Japan, ASTM STP 864 1985: p. 387-400.
Grenestedt J.L. Lay-up optimization against buckling of shear panels. Struct Optim 3 (1991) 115-120
Fukunaga H., and Sekine H. Stiffness design method of symmetric laminates using lamination parameters. AIAA J 30 (1992) 2791-2793
Grenestedt J.L. Composite plate optimization only requires one parameter. Struct Optim 2 (1990) 29-37
Grédiac M. A procedure for designing laminated plates with required stiffness properties. Application to thin quasi-isotropic quasi-homogenous uncoupled laminates. J Compos Mater 33 20 (1999) 1939-1956
Grédiac M. On the design of some particular orthotropic plates with non-standard ply orientations. J Compos Mater 34 19 (2000) 1665-1693
Bruyneel M., Duysinx P., and Fleury C. A family of MMA approximations for structural optimization. Struct Multidisciplinary Optim 24 (2002) 263-276
Bruyneel M., and Fleury C. Composite structures optimization using sequential convex programming. Adv Eng Software 33 (2002) 697-711
BOSS/Quattro. Samtech, Liège, Belgium. Available from: www.samtech.be.
SAMCEF. Système d'Analyse des Milieux Continus par Eléments Finis, Samtech, Liège, Belgium. Available from: www.samtech.be.
Bruyneel M, Fleury C. The key role of fibers orientations in the optimization of composite structures. Internal Report OA58, LTAS-Multidisciplinary Optimization, University of Liège; 2001.
Schmit L.A., and Farshi B. Optimum laminate design for strength and stiffness. Int J Num Meth Eng 7 (1973) 519-536
Duysinx P., and Bendsoe M.P. Topology optimization of continuum structures with local stress constraints. Int J Num Meth Eng 43 (1998) 1453-1478
Abrate S. Optimal design of laminated plates and shells. Compos Struct 29 (1994) 269-286
Fukunaga H., and Chou T.W. On laminate configurations for simultaneous failure. J Compos Mater 22 (1988) 271-286
Foldager JP. Design of composite structures. PhD Thesis, Special Report No. 39, Aalborg University, Institute of Mechanical Engineering, Denmark; 1999.
Autio M. Determining the real lay-up of a laminate corresponding to optimal lamination parameters by genetic search. Struct Multidisciplinary Optim 20 (2000) 301-310
Hammer VB. Design of composite laminates with optimized stiffness, strength, and damage properties. PhD Thesis, Report DCAMM S72, Technical University of Denmark; 1997.
Fleury C. Dual methods for convex separable problems. In: Rozvany G.I.N. (Ed). Optimization of large structural systems vol. I (1993), Kluwer Academic Publishers, The Netherlands 509-530
Fleury C. Sequential convex programming for structural optimization problems. In: Rozvany G.I.N. (Ed). Optimization of large structural systems vol. I (1993), Kluwer Academic Publishers, The Netherlands 531-553
Bruyneel M, Vermaut O, Fleury C. Two point based approximation schemes for optimal orientation in laminates. In: Third ISSMO/UBCAB/UB/AIAA World Congress on structural and multidisciplinary optimization, Amherst, NY, May; 1999 [CD Proceedings].
Svanberg K. The method of moving asymptotes-A new method for structural optimization. Int J Num Meth Eng 24 (1987) 359-373
Bruyneel M. Schémas d'approximation pour la conception optimale de structures en matériaux composites. PhD Thesis. Collection des Publications de la Faculté des Sciences Appliquées, no 219, University of Liège; 2002 [in French].
Bruyneel M., and Duysinx P. Note on topology optimization of continuum structures including self-weight. Struct Multidisciplinary Optim 29 (2005) 245-256
Svanberg K. A globally convergent version of MMA without line search. In: First World Congress of Structural and Multidisciplinary Optimization-WCSMO1, Goslar, Germany, 1995; p. 9-16.
Geier B., and Zimmerman R. Composite laminate stiffnesses and their derivatives. In: Gilmore B.J., Hoeltzel D.A., Dutta D., and Eschenauer H.A. (Eds). Advances in design and automation vol. II (1994), ASME 237-246
Cunningham R., O'Sullivan M., McNamara J.F., and Harte A. Shape and thickness optimization of a composite light rail vehicle body-shell. IMF-15 Manufacturing Strategies (1998), Belfast, Ireland
Vanderplaats G.N. Numerical optimization techniques for engineering design: with applications (1984), McGraw-Hill
