L.S. de Silva Towards a consistent design approach for steel joints under generalized loading J. Constr. Steel Res. 64 2008 1059 1075
L.S. de Silva, L.F.N. Neves, and F.C.T. Gomes Rotational stiffness of rectangular hollow section composite joints J. Struct. Eng. 129 No 4 2003
A.Y. Elghazouli, C. Mágala-Chuquitaype, J.M. Castro, and A.H. Orton Experimental monotonic and cyclic behaviour of blind-bolted angle connections Eng. Struct. 31 2009 2540 2553
J.E. France, J.B. Davison, and P.A. Kirby Strength and rotation response of moment connections to tubular columns using flowdrill connectors J. Constr. Steel Res. 50 1999 1 14
J.E. France, J.B. Davison, and P.A. Kirby Strength and rotation response of simple connections to tubular columns using flowdrill connectors J. Constr. Steel Res. 50 1999 15 34
J.E. France, J.B. Davison, and P.A. Kirby Moment-capacity and rotational stiffness of endplate connections to concrete-filled tubular columns with flowdrilled connectors J. Constr. Steel Res. 50 1999 35 48
F.C.T. Gome Etat limite ultime de la résistance de l'ame d'une colonne dans un assemblage semi-rigide d'axe faible (in french) Rapport interne 203, Technical Report 1990 University of Liege
S.S. Huang, B. Davison, and I.W. Burgess Experiments on reverse-channel connection at elevated temperatures Eng. Struct. 49 2013 937 982
J.P. Jaspart, C. Pietrapertosa, K. Weynand, E. Busse, and R. Klinkhammer Development of a full consistent design approach for bolted and welded joints in building frames and trusses between steel members made of hollow and/or open sections: application of the component method Practical guidelines. CIDECT Report 5BP - 4/05 vol. 1 2005
J.P. Jaspart Recent advances in the field of steel joints - column bases and further configurations for beam-to-column joints and beam splices (Agregation Thesis) 1997 University of Liege
C. Mágala-Chuquitaype, and A.Y. Elghazouli Component-based mechanical models for blind-bolted angle connections Eng. Struct. 32 2010 3048 3067
C. Mágala-Chuquitaype, and A.Y. Elghazouli Response and component characterization of semi-rigid connections to tubular column under axial loads Eng. Struct. 41 2012 510 532
C. Mágala-Chuquitaype, and A.Y. Elghazouli Behaviour of combined channel/angle connections to tubular columns under monotonic and cyclic loadings Eng. Struct. 32 2010 1600 1616
A.Y. Park, and Y.C. Wang Development of component stiffness equation for bolted connection to RHS columns J. Constr. Steel Res. 70 2012 137 152
D. Vandegans, and J. Janss Connection between steel beam and concrete-filled R.H.S. based on the stub technique (threaded stub) R. Bjorhovde, A. Colson, R. Zandonini, Connections in steel structures III: Behaviour, strength and design 1995
EN1993-1-8 European Committee for Standardization - CEN. Eurocode 3: design of steel structures. Part 1.8 Design of joints, Brussels 2005
EN1994-1-1 European Committee for Standardization - CEN. Eurocode 4: design of composite steel and concrete structures. Part 1.1 General rules and rules for buildings, Brussels 2005
HSS-SERF project High strength steel in seismic resistant building frames final report 2013 (freely download at http://orbi.ulg.ac.be/handle/2268/165258)
HSS-SERF project High strength steel in seismic resistant building frames Deliverable D4: Prequalification tests on bolted beam-to-column joints in moment-resisting dual-steel frames report 2013 University of Liège (Contact the others to freely obtain the document)
EN1090-2 Execution of steel structures and aluminium structures - part 2 Technical requirements for steel structures, Brussels 2008
L. Comeliau, J.F. Demonceau, and J.P. Jaspart Computation note on the design on bolted beam-to-column joints within HSS-SERF project (internal report) 2012 University of Liege
H.F. Winterkorn, and H.Y. Yang Foundation engineering handbook 1975 New York
