[en] Purpose: To compare the biomechanical and optical properties of 2 new hydrophobic platforms and a series of commercially available foldable intraocular lenses (IOLs).
Results: With 1 exception, IOLs equilibrated in aqueous medium had a lower glass-transition temperature, higher deformability, lower injection forces, and complete recovery of their initial optical properties after injection. Typical hydrophobic acrylic dry-packaged IOLs required higher injection forces with high residual deformation and lost part of their initial optical quality after injection. Hydrophobic acrylic C-loop, double C-loop, and closed quadripod haptics applied optimum compression forces to the capsular bag with negligible optic axial displacement and tilt compared with plate haptics and poly(methyl methacrylate) haptics.
Conclusions: The combination of the C-loop haptic and the bioadhesive glistening-free material, which absorbs a predetermined amount of water, allowed for a biomechanically stable IOL. The same material used in association with a double C-loop haptic design facilitated the perioperative manipulation and placement of the IOL in a smaller capsular bag without impairing the other biomechanical properties of a single C-loop design.
Research Center/Unit :
Center for Education and Research on Macromolecules (CERM)
Disciplines :
Chemistry Materials science & engineering
Author, co-author :
Bozukova, Dimitriya; Physiol S.A.
Pagnoulle, Christophe; Physiol S.A.
Jérôme, Christine ; Université de Liège - ULiège > Department of Chemistry > Center for Education and Research on Macromolecules (CERM)
Language :
English
Title :
Biomechanical and optical properties of 2 new hydrophobic platforms for intraocular lenses
Publication date :
2013
Journal title :
Journal of Cataract and Refractive Surgery
ISSN :
0886-3350
eISSN :
1873-4502
Publisher :
Elsevier Science, New York, United States - New York
scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.
Bibliography
J. Alió, J.L. Rodriguez-Prats, and A. Galal Advances in microincision cataract surgery intraocular lenses Curr Opin Ophthalmol 17 2006 80 93
G.U. Auffarth, A. Golescu, K.A. Becker, and H.E. Völcker Quantification of posterior capsule opacification with round and sharp optic edge intraocular lenses Ophthalmology 110 2003 772 780
A. Coombes, and H. Seward Posterior capsular opacification prevention: IOL design and material [commentary] Br J Ophthalmol 83 1999 640 641 Available at: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC1723079/pdf/v083p00640.pdf Accessed February 22, 2013
M. Chehade, and M.J. Elder Intraocular lens materials and styles: a review Aust N Z J Ophthalmol 25 1997 255 263 Available at: http://onlinelibrary. wiley.com/doi/10.1111/j.1442-9071.1997.tb01512.x/pdf Accessed February 22, 2013
S.K. Pandey, L. Werner, M.E. Wilson Jr., A.M. Izak, and D.J. Apple Capsulorhexis ovaling and capsular bag stretch after rigid and foldable intraocular lens implantation; experimental study in pediatric human eyes J Cataract Refract Surg 30 2004 2183 2191
S.S. Lane, P. Burgi, G.S. Milios, M.W. Orchowski, M. Vaughan, and E. Schwarte Comparison of the biomechanical behavior of foldable intraocular lenses J Cataract Refract Surg 30 2004 2397 2402
E.J. Hollick, D.J. Spalton, P.G. Ursell, and M.V. Pande Lens epithelial cell regression on the posterior capsule with different intraocular lens materials Br J Ophthalmol 82 1998 1182 1188 Available at: http://www.ncbi.nlm. nih.gov/pmc/articles/PMC1722372/pdf/v082p01182.pdf Accessed February 22, 2013
T. Oshika, T. Nagata, and Y. Ishii Adhesion of lens capsule to intraocular lenses of polymethylmethacrylate, silicone, and acrylic foldable materials: an experimental study Br J Ophthalmol 82 1998 549 553 Available at: http://www.pubmedcentral.nih.gov/picrender.fcgi?artid=1722579&blobtype=pdf Accessed February 21, 2013
J. Landers, and H. Liu Choice of intraocular lens may not affect refractive stability following cataract surgery Clin Exp Ophthalmol 33 2005 34 40
I. Sideridou, V. Tserki, and G. Papanastasiou Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins Biomaterials 24 2003 655 665
C. Pagnoulle, D. Bozukova, L. Gobin, V. Bertrand, and M.-C. Gillet-De Pauw Assessment of new-generation glistening-free hydrophobic acrylic intraocular lens material J Cataract Refract Surg 38 2012 1271 1277
Pagnoulle C, Nolet De Brauwere VanSteeland M, inventors; Phys-IOL assignee. Polymer composition for an intraocular lens. Patent WO2006/063994, December 13, 2005. Available at: http://www.wipo.int/patentscope/search/en/ WO2006063994. Accessed February 22, 2013
C.T. Moynihan, A.J. Easteal, J. Wilder, and J. Tucker Dependence of the glass transition temperature on heating and cooling rate J Phys Chem 78 1974 2673 2677
International Organization for Standardization Ophthalmic Implants - Intraocular Lenses - Part 9. Multifocal intraocular lenses 2006 ISO Geneva, Switzerland (ISO 11979-9)
J. Lubliner Plasticity Theory 2008 Dover Mineola, NY chapter 3
International Organization for Standardization Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods 1999 ISO Geneva, Switzerland (ISO 11979-2); technical corrigendum 1. 2003
L. Werner Glistenings and surface light scattering in intraocular lenses J Cataract Refract Surg 36 2010 1398 1420
J.R. Davis Handbook of Materials for Medical Devices 2003 ASM International Materials Park, OH 18
A. Rodríguez-Benot, R. Santamaría, A. Martín-Malo, and P. Aljama Sterilization procedures and biocompatibility C. Ronco, G. La Greca, Hemodialysis Technology (Contributions to Nephrology) 2002 Karger Basle, Switzerland 138 145
S.A. Dogbe, G. Emi-Peynolds, and G.K. Banini Gamma radiation of waste waters from textile industries in Ghana J Appl Sci Technol 6 2001 13 20
B.D. Ratner, A.J. Coury, D.F. Williams, R.L. Williams, F.J. Schoen, and R.J. Levy Degradation of materials in the biological environment 2nd ed. B.D. Ratner, A.S. Hoffman, F.J. Schoen, J.E. Lemons, Biomaterials Science: An Introduction to Materials in Medicine 6 2004 Elsevier London, UK 411 454
Lengfelder E, inventor; Adatomed Pharmazeutische und Medizintechnische Gesellschaft mbH, assignee. Process for sterilization of implants. Patent 5250257 October 5, 1993. Available at: http://www.google.com/patents/US5250257. Accessed February 21, 2013
S. Krag, and T.T. Andreassen Mechanical properties of the human posterior lens capsule Invest Ophthalmol Vis Sci 44 2003 691 696 Available at: http://www.iovs.org/cgi/reprint/44/2/691 Accessed February 21, 2013
R.F. Fisher Elastic constants of the human lens capsule J Physiol (Lond) 201 1969 1 19 Available at: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC1351628/ pdf/jphysiol01081-0009.pdf Accessed February 21, 2013
E.I. Assia, U.F.C. Legler, and D.J. Apple The capsular bag after short- and long-term fixation of intraocular lenses Ophthalmology 102 1995 1151 1157
Similar publications
Sorry the service is unavailable at the moment. Please try again later.
This website uses cookies to improve user experience. Read more
Save & Close
Accept all
Decline all
Show detailsHide details
Cookie declaration
About cookies
Strictly necessary
Performance
Strictly necessary cookies allow core website functionality such as user login and account management. The website cannot be used properly without strictly necessary cookies.
This cookie is used by Cookie-Script.com service to remember visitor cookie consent preferences. It is necessary for Cookie-Script.com cookie banner to work properly.
Performance cookies are used to see how visitors use the website, eg. analytics cookies. Those cookies cannot be used to directly identify a certain visitor.
Used to store the attribution information, the referrer initially used to visit the website
Cookies are small text files that are placed on your computer by websites that you visit. Websites use cookies to help users navigate efficiently and perform certain functions. Cookies that are required for the website to operate properly are allowed to be set without your permission. All other cookies need to be approved before they can be set in the browser.
You can change your consent to cookie usage at any time on our Privacy Policy page.