Lemort, V., Quoilin, S., Cuevas, C., and Lebrun, J., 2009, "Testing and Modeling a Scroll Expander Integrated Into an Organic Rankine Cycle," Appl. Therm. Eng., 29(14-15), pp. 3094-3102.
Wang, H., Peterson, R. B., and Herron, T., 2009, "Experimental Performance of a Compliant Scroll Expander for an Organic Rankine Cycle," Proc. Inst. Mech. Eng., Part A, 223(7), pp. 863-872.
Harada, K., 2010, "Development of a Small Scale Scroll Expander," M.S. thesis, Oregon State University, Corvallis, OR.
Xiaojun, G., Liansheng, L., Yuanyang, Z., and Pengcheng, S., 2004, "Research on a Scroll Expander Used for Recovering Work in a Fuel Cell," Int. J. of Thermodyn., 7(1), pp. 1-8.
Nagata, H., Kakuda, M., Sekiya, S., Shimoji, M., and Koda, T., 2010, "Development of a Scroll Expander for the CO2 Refrigeration Cycle," International Symposium on Next-Generation Air Conditioning and Refrigeration Technology, Tokyo, February 17-19.
Kim, H. J., Ahn, J. M., Park, I., and Rha, P. C., 2007, "Scroll Expander for Power Generation From a Low-Grade Steam Source," Proc. Inst. Mech. Eng., Part A, 221(5), pp. 705-711.
Wang, B., Li, X., and Shi, W., 2005, "A General Geometrical Model of Scroll Compressors Based on Discretional Initial Angles of Involute," Int. J. Refrig., 28, pp. 958-966. (Pubitemid 41084254)
Gravesen, J., and Henriksen, C., 2001, "The Geometry of the Scroll Compressor," Soc. Ind. Appl. Math., 43, pp. 113-126. (Pubitemid 32406894)
Blunier, B., Cirrincione, G., Herve, Y., and Miraoui, A., 2006, "Novel Geometrical Model of Scroll Compressors for the Analytical Description of the Chamber Volumes," International Compressor Engineering Conference, Purdue, West Lafayette, IN, July 17-20, Paper No. 1745.
Lemort, V., and Quoilin, S., 2009, "Designing Scroll Expanders for Use in Heat Recovery Rankine Cycles," Proceedings of the IMechE International Conference of Compressors and Their Systems (IMechE 2009), London, September 7-9, pp. 3-12.
Chen, Y., Halm, N. P., Groll, E. A., and Braun, J. E., 2002, "Mathematical Modeling of Scroll Compressor-Part I: Compression Process Modeling," Int. J. Refrig., 25, pp. 731-750. (Pubitemid 35011459)
Dechesne, B., 2012, "Designing a Scroll Expander for a Micro-Solar Power Plant" S.M. thesis, Thermodynamics Laboratory, Aerospace and Mechanical Engineering Department, University of Liege, Liege, Belgium.
Dechesne, B., Orosz, M., Legros, A., and Hemond, H., 2012, "Development of a Scroll Expander for Micro-CSP With Organic Rankine Cycle," Proceedings of the Solar Power and Chemical Energy Systems (SolarPACES) Conference, Marrakesh, Morocco, September 11-14, Poster No. I-03.
Bell, I., Groll, E. A., Braun, J. E., and King, G., 2010, "Update on Scroll Compressor Chamber Geometry," International Compressor Engineering Conference, Purdue, West Lafayette, IN, July 12-15, Paper No. 2033.
Lemort, V., Declaye, S., and Quoilin, S., 2012, "Experimental Characterization of a Hermetic Scroll Expander for Use in a Micro-Scale Rankine Cycle," Proc. Insti. Mech. Eng., Part A, 226(1), pp. 126-136.
Orosz, M., 2012, "ThermoSolar and Photovoltaic Hybridization for Small Scale Distributed Generation: Applications for Powering Rural Health," Ph.D. thesis, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Quoilin, S., Declaye, S., and Lemort, V., 2010, "Expansion Machine and Fluid Selection for the Organic Rankine Cycle," Hefat 2010-7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, July 19-21, http://hdl.handle.net/2268/62997
Cengel, Y. A., 2007, Heat and Mass Transfer: A Practical Approach, McGraw-Hill, New York.
Hiwata, A., Ikeda, A., Morimoto, T., Kosuda, O., and Matsui, M., 2008, "Axial and Radial Force Control for CO2 Scroll Expander," International Compressor Engineering Conference, Purdue,West Lafayette, IN, July 14-17, Paper No. 1849.
