Abstract :
[en] Research in precision spraying investigates the means to reduce the amount of herbicide applied by directing droplets more accurately towards the weeds. The trend in the development of spot spraying equipment is an increase of the spatial resolution and new actuators that are able to target very small areas. However, there is a lack of methods for assigning rates of herbicides relating target to optimal droplet features. A wide range of droplet impact angles occurs during the spray application process because of droplet trajectories and the variability of leaf orientation. In this study, laboratory experiments were conducted to highlight the effect of surface orientation on droplet impact outcomes (adhesion, rebound or splashing) on two very difficult-to-wet surfaces: an artificial surface with a regular roughness pattern and an excised black-grass leaf with an anisotropic roughness pattern. Measurements were performed for different surface orientations with a high-speed camera coupled with backlighting LED. Droplets of two formulations (distilled water and distilled water + a surfactant) were produced with a moving flat-fan hydraulic nozzle to obtain a wide range of droplet sizes and velocities, which were measured by image analysis. Increasing surface angle reduces surface area available for droplet capture. Droplet impact behaviors are then modified since surface tilt induces a tangential velocity component at impact and, consequently, a reduction of the normal component. Impact modifications have also been observed due to the anisotropic roughness pattern of a black-grass leaf. The integration of droplet-surface interaction information offers a significant way to further improve the precision spraying efficiency by considering the optimal droplet size, speed and ejection angle depending on the target surface and architecture.
Scopus citations®
without self-citations
22