Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE

Piezel, B.; Mercatoris, Benoît; Trabelsi, W.; Laiarinandrasana, L.; Thionnet, A.; Massart, T. J.

doi:10.1016/j.compstruct.2012.03.015

Article (Scientific journals)

Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE

Piezel, B.; Mercatoris, Benoît; Trabelsi, W. et al.

2012 • In Composite Structures, 94 (8), p. 2343-2357

Peer Reviewed verified by ORBi

Permalink
https://hdl.handle.net/2268/160741

DOI
10.1016/j.compstruct.2012.03.015

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

Piezel_2012_CS.pdf

Publisher postprint (3.75 MB)

Request a copy

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Computational homogenisation; Debonding; Delamination; Non-linear flexural behaviour; Thermoplastic yarns; Woven composite; Bending effect; Delamination failure; Flexural effects; Flexural loading; Homogenisation; Interface stress; Out-of-plane; Reinforcement cracking; Stress component; Tangential stress; Textile-reinforced composites; Thickness direction; Composite materials; Loading; Reinforcement; Stress analysis; Three dimensional; Weaving

Abstract :

[en] This paper presents a computational homogenisation-based technique for flexural effects in textile reinforced composite planar shells. An homogenisation procedure is used for the in-plane and the out-of-plane behaviour of three-dimensional woven composite shells, taking the in-plane periodicity of the material into account while relaxing any periodicity tying in the thickness direction. Several types of damage (matrix or reinforcement cracking, delamination, ...) can appear in a composite material. In this paper, material non-linear computations are used to assess the importance of bending on the risk for delamination at the reinforcement/matrix interface. The normal and tangential stresses at the interface are computed and a simplified criterion for delamination is used for this purpose. The effect of flexural loading on the stress components responsible for a potential delamination failure mode at the interface is analysed. The values of interface stresses obtained by means of flexural homogenisation are compared with 3D homogenisation results using periodicity constraints along the thickness direction, and compared qualitatively with experimental facts available from the literature. The importance for taking flexural effects into account properly is emphasised. © 2012 Elsevier Ltd.

Disciplines :

Mechanical engineering
Materials science & engineering

Author, co-author :

Piezel, B.; Building, Architecture and Town Planning Department, CP 194/2, Université Libre de Bruxelles (ULB), Av. F.-D. Roosevelt 50, 1050 Brussels, Belgium

Mercatoris, Benoît ; Université Libre de Bruxelles - ULB > Building, Architecture and Town Planning Dept.

Trabelsi, W.; MINES ParisTech, Centre des Matériaux, CNRS UMR 7633, BP 87, 91003 Evry Cedex, France

Laiarinandrasana, L.; MINES ParisTech, Centre des Matériaux, CNRS UMR 7633, BP 87, 91003 Evry Cedex, France

Thionnet, A.; MINES ParisTech, Centre des Matériaux, CNRS UMR 7633, BP 87, 91003 Evry Cedex, France, Université de Bourgogne, Mirande, BP 47870, 21078 Dijon, France

Massart, T. J.; Building, Architecture and Town Planning Department, CP 194/2, Université Libre de Bruxelles (ULB), Av. F.-D. Roosevelt 50, 1050 Brussels, Belgium, McGill University, Montreal, Canada

Language :

English

Title :

Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE

Publication date :

2012

Journal title :

Composite Structures

ISSN :

0263-8223

eISSN :

1879-1085

Publisher :

Elsevier, Netherlands

Volume :

Issue :

Pages :

2343-2357

Peer reviewed :

Peer Reviewed verified by ORBi

Funders :

F.R.S.-FNRS - Fonds de la Recherche Scientifique

Available on ORBi :

since 08 January 2014

Statistics

Number of views

68 (3 by ULiège)

Number of downloads

0 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Mouritz A.P., Bannister M.K., Falzon P.J., Leong K.H. Review of applications for advanced three-dimensional fibre textile composites. Composites: Part A 1999, 30:1445-1461.
Sun B., Gu B., Ding X. Compressive behavior of 3-D angle-interlock woven fabric composites at various strain rates. Polym Test 2005, 24:447-454.
El Hage C. Modélisation du comportement élastique endommageable de matériaux composites à renfort tridimensionnel. PhD thesis, Université de Technologie de Compiègne; 2006.
Ishikawa T. Anti-symmetric elastic properties of composite plates of satin weave cloth. Fib Sci Technol 1981, 15(2):127-145.
Ishikawa T., Chou T.W. Stiffness and strength behaviour of woven fabric composites. J Mater Sci 1982, 17(11):3211-3220.
Ishikawa T., Chou T.W. Elastic behaviour of woven hybrid composites. J Compos Mater 1982, 16(1):2-19.
Naik N.K., Shembekar P.S. Elastic behavior of woven fabric composites: I-lamina analysis. J Compos Mater 1992, 26(15):2196-2225.
Naik N.K., Shembekar P.S. Elastic behavior of woven fabric composites: II-lamina analysis. J Compos Mater 1992, 26(15):2226-2246.
Chaphalkar P., Kelkar A.D. Classical laminate theory model for twill weave fabric composites. Compos Part A - Appl Sci Manuf 2001, 32(9):1281-1289.
Lomov S.V., Gusakov A.V., Huysmans G., Prodromou A., Verpoest I. Textile geometry preprocessor for meso-mechanical models of woven composites. Compos Sci Technol 2000, 60:2083-2095.
Prodromou A.G., Lomov S.V., Verpoest I. The method of cells and the mechanical properties of textile composite. Compos Struct 2011, 93:1290-1299.
Paumelle P., Hassin A., Lene F. Microstress analysis in woven composite structure. Recherche Aérospatiale 1991, 6:47-62.
Guedes J.M., Kikuchi N. Preprocessing and postprocessing for materials based on the homogenization method with adaptative finite element methods. Comput Methods Appl Mech Eng 1990, 83:143-198.
Whitcomb J.D., Srirengan K., Chapman C. Evaluation of homogenization for global/local stress analysis of textile composites. Compos Struct 1995, 31:137-149.
Lomov S.V., Ivanov D.S., Verpoest I., Zako M., Kurashiki T., Nakai H., et al. Meso-FE modelling of textile composites: road map, data flow and algorithms. Compos Sci Technol 2007, 67:1870-1891.
Verpoest I., Lomov S.V. Virtual textile composites software WiseTex: integration with micro-mechanical, permeability and structural analysis. Compos Sci Technol 2005, 65:2563-2574.
Couegnat G. Approche multi-échelles du comportement mécanique de matériaux composites à renfort tissé, PhD thesis, Université Bordeaux 1; 2008.
Couegnat G, Martin E, Lamon J, Carrere N. Multiscale modelling of the mechanical behaviour of woven composite materials. In: Proceedings of ICCM17, Edinburgh; 2009.
Perie G, Lomov SV, Verpoest I, Marsal D. Meso-scale modelling and homogenization of interlock reinforced composite. In: Proceedings of ICCM17, Edinburgh; 2009.
Schneider J, Hello G, Aboura Z, Benzeggagh ML, Marsal D. A meso-FE voxel model of an interlock woven composite. In: Proceedings of ICCM17, Edinburgh; 2009.
Daggumati S., Van Paepegem W., Degrieck J., Xu J., Lomov S.V., Verpoest I. Local damage in a 5-harness satin weave composite under static tension: Part ii - Meso-fe modelling. Compos Sci Technol 2011, 71:1217-1224.
Cox B.N., Dadkhah M.S., Morris W.L., Flintoff J.G. Failure mechanisms of 3D woven composites in tension, compression, and bending. Acta Metall Mater 1994, 42(12):3967-3984.
Bohm R., Gude M., Hufenbach W. A phenomenologically based damage model for textile composites with crimped reinforcement. Compos Sci Technol 2010, 70:81-87.
Gao X.L., Li K. Damaged mosaic laminate model of woven fabric composites with transverse yarn cracking and interface debonding. Compos Sci Technol 2002, 62:1821-1834.
Gao X.L., Li K., Mall S. A mechanics-of-materials model for predicting Young's modulus of damaged woven fabric composites involving three damage modes. Int J Solids Struct 2003, 40:981-999.
Bensoussan A., Lions J.L., Papanicolaou G. Asymptotic analysis for periodic structures 1978, North-Holland Publishing Company.
Suquet P. Elements of homogenization for inelastic solid mechanics. Homogenization techniques for composite media 1987, vol. 272. Springer-Verlag, Berlin.
Peerlings R.H.J., Fleck N.A. Computational evaluation of strain gradient elasticity constants. Int J Multiscale Comput Eng 2004, 2(4):599-619.
Kalamkarov A.L., Andrianov I.V., Danishevs'kyy V.V. Asymptotic homogenization of composite materials and structures. Appl Mech Rev 2009, 62(3). [Article Number: 030802].
Cartraud P., Messager T. Computational homogenization of periodic beam-like structures. Int J Solids Struct 2006, 43(3-4):686-696.
Challagulla K.S., Georgiades A., Saha G.C., Kalamkarov A.L. Micromechanical analysis of grid-reinforced thin composite generally orthotropic shells. Compos Part B - Eng 2008, 39(4):627-644.
Cecchi A., Sab K. A comparison between a 3D discrete model and two homogenised plate models for periodic elastic brickwork. Int J Solids Struct 2004, 41(9-10):2259-2276.
Cecchi A., Sab K. A homogenized Reissner-Mindlin model for orthotropic periodic plates: application to brickwork panels. Int J Solids Struct 2007, 44(18-19):6055-6079.
Ibrahimbegovic A., Markovic D. Strong coupling methods in multi-phase and multi-scale modeling of inelastic behavior of heterogeneous structures. Comput Methods Appl Mech Eng 2003, 192(28-30):3089-3107.
Ghosh S., Lee K., Raghavan P. A multi-level computational model for multi-scale damage analysis in composite and porous materials. Int J Solids Struct 2001, 38(14):2335-2385.
Raghavan P., Ghosh S. A continuum damage mechanics model for unidirectional composites undergoing interfacial debonding. Mech Mater 2005, 37:955-979.
Jain J.R., Ghosh S. Damage evolution in composites with a homogenization-based continuum damage mechanics model. Int J Damage Mech 2009, 18(6):533-568.
Smit R.J.M., Brekelmans W.A.M., Meijer H.E.H. Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling. Comput Methods Appl Mech Eng 1998, 155(1-2):181-192.
Feyel F., Chaboche J.L. FE 2 multiscale approach for modelling the elastoviscoplastic behaviour of long fiber SiC/Ti composite materials. Comput Methods Appl Mech Eng 2000, 183(3-4):309-330.
Kouznetsova V.G., Brekelmans W.A.M., Baaijens F.P.T. An approach to micro-macro modeling of heterogeneous materials. Comput Mech 2001, 27(1):37-48.
Geers M.G.D., Kouznetsova V.G., Brekelmans W.A.M. Multi-scale computational homogenization: trends and challenges. J Comput Appl Math 2010, 234(7):2175-2182.
Pindera M.J., Khatam H., Drago A.S., Bansal Y. Micromechanics of spatially uniform heterogeneous media: a critical review and emerging approaches. Composites: Part B 2009, 40:349-378.
Geers M.G.D., Coenen E.W.C., Kouznetsova V.G. Multi-scale computational homogenization of structured thin sheets. Modell Simul Mater Sci Eng 2007, 15(4):S393-S404.
Coenen E.W.C., Kouznetsova V.G., Geers M.G.D. A multi-scale computational strategy for structured thin sheets. Int J Mater Form 2008, 1(suppl.):61-64.
Coenen E.W.C., Kouznetsova V.G., Geers M.G.D. Computational homogenization for heterogeneous thin sheets. Int J Numer Methods Eng 2010, 83(8-9):1180-1205.
Mistler M., Anthoine A., Butenweg C. In-plane and out-of-plane homogenisation of masonry. Comput Struct 2007, 85(17-18):1321-1330.
Mercatoris B.C.N., Bouillard P., Massart T.J. Multi-scale detection of failure in planar masonry thin shells using computational homogenisation. Eng Fract Mech 2009, 76(4):479-499.
Mercatoris B.C.N., Massart T.J. A coupled two-scale computational scheme for the failure of periodic quasi-brittle thin planar shells and its application to masonry. Int J Numer Methods Eng 2011, 85:1177-1206.
Onal L., Adanur S. Modeling of elastic, thermal, and strength/failure analysis of two-dimensional woven composites - a review. Appl Mech Rev 2007, 60:37-49.
Lomov G.S.V., Perie D.S., Ivanov D., Verpoest I., Marsal D. Modeling three-dimensional fabrics and three-dimensional reinforced composites: challenges and solutions. Textile Res J 2011, 81(1):28-41.
Sankar B.V., Marrey R.V. A unit-cell model of textile composite beams for predicting stiffness properties. Compos Sci Technol 1993, 49:61-69.
Chung P.W., Tamma K.K. Woven fabric composites - developments in engineering bounds, homogenization and applications. Int J Numer Methods Eng 1999, 45:1757-1790.
Ivanov D.S., Lomov S.V., Ivanov S.G., Verpoest I. Stress distribution in outer and inner plies of textile laminates and novel boundary conditions for unit cell analysis. Composites: Part A 2010, 41:571-580.
Anthoine A. Derivation of the in-plane elastic characteristics of masonry through homogenization theory. Int J Solids Struct 1995, 32(2):137-163.
Mercatoris B.C.N., Massart T.J. Assessment of periodic homogenization-based multiscale computational schemes for quasi-brittle structural failure. Int J Multiscale Comput Eng 2009, 7(2):153-170.
Zeman J., Šejnoha M. From random microstructures to representative volume elements. Modell Simul Mater Sci Eng 2007, 15(4):S325-S335.
Massart T.J., Peerlings R.H.J., Geers M.G.D. An enhanced multi-scale approach for masonry wall computations with localization of damage. Int J Numer Methods Eng 2007, 69(5):1022-1059.
Kouznetsova V.G., Geers M.G.D., Brekelmans W.A.M. Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme. Int J Numer Methods Eng 2002, 54(8):1235-1260.
Masson JA, Bourban PE, Carlsson L, Mercier J-P. Composites matrice organique: constituants, procédés, propriétés, Traités des matériaux, vol. 15. Presses Polytechniques et Universitaires Romandes; 2004.
van Rijswijk J., N Bersee H.E. Reactive processing of textile fiber-reinforced thermoplastic composites - An overview. Composites: Part A 2007, 38:666-681.
Steggall-Murphy C., Simacek P., Advani S.G., Yarlagadda S., Walsh S. A model for thermoplastic melt impregnation of fiber bundles during consolidation of powder-impregnated continuous fiber composites. Composites: Part A 2010, 41:93-100.
Piezel B. Comportement et analyse multi-échelles d'un composite à renfort tissé tridimensionnel. PhD thesis, Mines ParisTech; 2010.
Piezel B, Laiarinandrasana L, Mansour E, Renard J, Thionnet A. Analyse expérimentale d'un composite textile en vue d'une modélisation multi-échelles. In: Proceedings of JNC 16; 2009.
Bade P., Vidal-Salle E., Maire E., Boisse P. Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. Compos Sci Technol 2008, 68:2433-2440.
Gasser A., Boisse P., Hanklar S. Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests. Comput Mater Sci 2000, 17:7-20.
Marcellan A., Bunsell A., Piques R., Colomban Ph. Micro-mechanisms, mechanical behaviour and probabilistic fracture analysis of PA 66 fibres. J Mater Sci 2003, 38:2117-2123.
Marcellan A., Colomban Ph., Bunsell A. (nano)structure, skin/core and tension behaviour of polyamide fibres. J Raman Spectrosc 2004, 35:308-315.
Herrera Ramirez J.M., Colomban Ph., Bunsell A. Micro-raman study of the fatigue fracture and tensile behaviour of polyamide (PA 66) fibres. J Raman Spectrosc 2004, 35:1063-1072.
Colomban Ph., Herrera Ramirez J.M., Paquin R., Marcellan A., Bunsell A. Micro-raman study of the fatigue and fracture PA 66 fibres: comparison with single PET and PP fibres. Eng Fract Mech 2006, 73:2463-2475.
Colomban Ph. Nanomechanics of advanced polymer fibres. Compos Sci Technol 2009, 69:1437-1441.
Besson J, Cailletaud G, Chaboche JL, Forest S. Mécanique non linéaire des matériaux, Hermès; 2001.
Lemaitre J., Chaboche J.L. Mécanique des matériaux solides 1985, Dunod.
Chamis C. Mechanics of composite materials: past, present and future. J Compos Technol Res 1989, 11:3-14.
Badel P., Vidal-Salllé E., Boisse P. Rate constitutive equations for computational analyses of textile composite reinforcement mechanical behaviour during forming. Composites: Part A 2009, 40:997-1007.
Watson M.C., Clyne T.W. The tensioned push-out test for fibre-matrix interface characterisation under mixed mode loading. Mater Sci Eng 1993, 160:1-5.
Zhang H., Ericson M.L., Varna J., Berglund L.A. Transverse single-fibre test for interfacial debonding in composites: 1. Experimental observations. Composites: Part A 1997, 28:309-315.
Lawrence P. Some theoretical considerations of fibre pull-out from an elastic matrix. J Mater Sci 1972, 7:1-6.
Chua P.S., Piggott M.R. The glass fibre-polymer interface: I - Theoretical consideration for single fibre pull-out tests. Compos Sci Technol 1985, 22:33-42.
Di Francia C., Ward T.C., Claus R.O. The single-fibre pull-out test. 1: Review and interpretation. Composites: Part A 1996, 27:597-612.
Wriggers P., Zavarise G., Zodhi T.I. A computational study of interfacial debonding damage in fibrous composite materials. Comput Mater Sci 1998, 12:39-56.
Li D.S., Wisnom M.R. Factors controlling the transverse tensile properties of unidirectional SiC/Ti-6Al-4V. Compos Eng 1995, 5:235-255.
Thionnet A., Renard J. Multi-scale analysis to determine fibre/matrix debonding criteria in SiC/titanium composites with and without consideration of the manufacturing residual stresses. Compos Sci Technol 1998, 58:945-955.
Besson J., Foerch R. Large scale object oriented finite element code design. Comput Methods Appl Mech Eng 1997, 142:165-187.
Miller B., Gaur U., Hirt D.E. Measurement and mechanical aspects of the microbond pull-out technique for obtaining fiber/resin interfacial shear strength. Compos Sci Technol 1991, 42:207-219.
Yue C.Y., Looi H.C., Quek M.Y. Assessment of fibre-matrix adhesion and interfacial properties using the pull-out test. Int J Adhes Adhes 1995, 15:73-80.
Yue C.Y., Looi H.C. Factors which influence the reliability of the assessment of interfacial bonding in fibrous composites using the pull-out test. Int J Adhes Adhes 2001, 21:309-323.
Brahmakumar M., Pavithran C., Pillai R.M. Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites. Compos Sci Technol 2005, 65:563-569.
Cheeseman B.A., Bogetti T.A. Ballistic impact into fabric and compliant composite laminates. Compos Struct 2003, 61:161-173.
Piezel B, Laiarinandrasana L, Mansour E, Thionnet A. Analyse multi-échelles d'un composite textile. In: Proceedings of JNC 16; 2009.