Modeling the hygrothermal behavior of biobased construction materials

Dubois, Samuel; Evrard, Arnaud; Lebeau, Frédéric

doi:10.1177/1744259113489810

Download

Article (Scientific journals)

Modeling the hygrothermal behavior of biobased construction materials

Dubois, Samuel; Evrard, Arnaud; Lebeau, Frédéric

2013 • In Journal of Building Physics, p. 1-23

Peer Reviewed verified by ORBi

Permalink
https://hdl.handle.net/2268/150902

DOI
10.1177/1744259113489810

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

COMSOL_complete.pdf

Author postprint (1.32 MB)

Download

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Heat air and moisture modeling; Moisture Buffer Value; lime–hemp concrete; hygroscopic; latent heat

Abstract :

[en] Materials with high moisture exchange capacity may have a strong impact on indoor climate conditions as well as building energy performance. Crop-based materials, characterized by their high porosity and hygroscopicity, belong to this category. Modeling their hygrothermal behavior accurately is thus particularly relevant for appropriate building design. A COMSOL Multiphysics transient heat air and moisture model is developed in this article to simulate moisture exchange between a lime–hemp concrete block and surrounding air during a Moisture Buffer Value evaluation test. Results are then compared with the validated heat air and moisture software using performance criteria showing a slight preference for both moisture exchanges and latent heat effect characterization. It offers yet additional advantages in terms of flexibility and transparency as well as further evolution potential.

Disciplines :

Architecture
Energy
Agriculture & agronomy

Author, co-author :

Dubois, Samuel ; Université de Liège - ULiège > Doct. sc. agro. & ingé. biol.

Evrard, Arnaud; Université Catholique de Louvain - UCL > Architecture et Climat

Lebeau, Frédéric ; Université de Liège - ULiège > Sciences et technologie de l'environnement > Mécanique et construction

Language :

English

Title :

Modeling the hygrothermal behavior of biobased construction materials

Alternative titles :

[en] Modélisation du comportement hygrothermique des matériaux de construction bio-sourcés

Publication date :

14 June 2013

Journal title :

Journal of Building Physics

ISSN :

1744-2591

eISSN :

1744-2583

Publisher :

SAGE Publications

Pages :

1-23

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

http://jen.sagepub.com/content/early/2013/06/12/1744259113489810

Funders :

FRIA - Fonds pour la Formation à la Recherche dans l'Industrie et dans l'Agriculture

Available on ORBi :

since 20 June 2013

Statistics

Number of views

113 (25 by ULiège)

Number of downloads

1059 (14 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Abadie MO, Mendonça KC. Moisture performance of building materials: from material characterization to building simulation using the Moisture Buffer Value concept. Building and Environment. 2009 ; 44 (2). 388-401
Bear J Dynamics of Fluids in Porous Media. New York: Dover Publications, 784 pp ; 1988 :
Collet F, Bart M, Serres L, et al. Porous structure and vapour sorption of hemp-based materials. Construction and Building Materials. 2008 ; 22: 1271-1280
EvrardA (2008) Transient hygrothermal behaviour of lime-hemp materials. PhD Thesis, Ecole Polytechnique de Louvain, Belgique.
Evrard A, De Herde A. Hygrothermal performance of lime-hemp wall assemblies. Journal of Building Physics. 2010 ; 34 (1). 5-25
Glaser H. Graphisches Verfahren zur Untersuchung von Diffusionsvorglinge. Kalfetechnik. 1959 ; 10: 345-349
Hagentoft C-E, Kalagasidis AS, Adl-Zarrabi B, et al. Assessment method of numerical prediction models for combined heat, air and moisture transfer in building components: benchmarks for one-dimensional cases. Journal of Thermal Envelope and Building Science. 2004 ; 27 (4). 327-352
Häupl P, Fechner H. Hygric material properties of porous building materials. Journal of Thermal Envelope and Building Science. 2003 ; 26 (3). 259-284
Häupl P, Grunewald J, Fechner H, et al. Coupled heat air and moisture transfer in building structures. International Journal of Heat and Mass Transfer. 1997 ; 40 (7). 1633-1642
Janssens A, Woloszyn M, Rode C, et al. From EMPD to CFD: overview of different approaches for heat air and moisture modeling in IEA Annex 41. Proceedings of the IEA ECBCS Annex 41 closing seminar, conference ; 2008 Copenhagen, Denmark ; 2008..
KalagasidisAS (2004) HAM-tools: an integrated simulation tool for heat, air and moisture transfer analyses in building physics. PhD Thesis, Building Physics Division, Department of Building Technology, Chalmers University of Technology, Sweden.
Kalagasidis AS, Weitzmann P, Nielsen TR, et al. The international building physics toolbox in Simulink. Energy and Buildings. 2007 ; 39 (6). 665-674
Künzel HM Simultaneous Heat and Moisture Transport in Building Components: One- and Two- Dimensional Calculation Using Simple Parameters. Stuttgart, Germany: IRB Verlag ; 1995 :
Li Y, Fazio P, Rao J. An investigation of moisture buffering performance of wood paneling at room level and its buffering effect on a test room. Building and Environment. 2012 ; 47 (1). 205-216
Moriasi DN, Arnold JG, Van Liew MW, et al. Model evaluation guidelines for systematic quantification of accuracy in watershed simulations. Transactions of the ASABE. 2007 ; 50 (3). 885-900
Osanyintola OF, Simonson CJ. Moisture buffering capacity of hygroscopic building materials: experimental facilities and energy impact. Energy and Buildings. 2006 ; 38 (10). 1270-1282
PadfieldT (1999) The role of absorbent building materials in moderating changes of relative humidity. PhD Thesis, Department of Structural Engineering and Materials, Technical University of Denmark, Denmark.
Pedersen CR. A transient model for analyzing the hygrothermal behavior of building constructions. Proceedings of the 3rd IBPSA, conference ; 1991 Nice, France ; 1991..
Peuhkuri RH, Mortensen LH, Hansen KK, et al Moisture Buffering of Building Materials. Rode C, ed. Kongens Lyngby: Department of Civil Engineering, Technical University of Denmark ; 2005 :
Philip JR, De Vries DA. Moisture movement in porous materials under temperature gradients. Transactions, American Geophysical Union. 1957 ; 38: 222-232
Rode C, Grau K. Moisture buffering and its consequence in whole building hygrothermal modeling. Journal of Building Physics. 2008 ; 31 (4). 333-360
SamriD (2008) Analyse physique et caractérisation hygrothermique des matériaux de construction: approche expérimentale et modélisation numérique. PhD Thesis, Institut National des Sciences Appliquées de Lyon, France.
Scheffler GA, Plagge R. A whole range hygric material model: modelling liquid and vapour transport properties in porous media. International Journal of Heat and Mass Transfer. 2010 ; 53 (1-3). 286-296
Tariku F, Kumaran K, Fazio P. Integrated analysis of whole building heat, air and moisture transfer. International Journal of Heat and Mass Transfer. 2010a ; 53 (15-16). 3111-3120
Tariku F, Kumaran K, Fazio P. Transient model for coupled heat air and moisture transfer through multilayered porous media. International Journal of Heat and Mass Transfer. 2010b ; 53 (15-16). 3035-3044
Ter Braak CJF. A Markov Chain Monte Carlo version of the genetic algorithm differential evolution: easy Bayesian computing for real parameter spaces. Statistics and Computing. 2006 ; 16: 239-249
Van Schijndel AWM. Integrated modeling of dynamic heat, air and moisture processes in buildings and systems using Simulink and COMSOL. Building Simulation. 2009 ; 2 (2). 143-155
WihanJ (2007) Humidity in straw bale walls and its effect on decomposition of straw. PhD Thesis, University of East London School of Computing and Technology, UK.