Adebiyi AA, Taslim ME, Crawford KD (2011) The use of computational fluid dynamic models for the optimization of cell seeding processes. Biomaterials 32:8753–8770
Ahn G, Park JH, Kang T (2010) Effect of pore architecture on oxygen diffusion in 3D scaffolds for tissue engineering. J Biomech Eng 132:104506-1–104506-5
HdA Almeida, Bártolo PJdS (2010) Virtual topological optimisation of scaffolds for rapid prototyping. Med Eng Phys 32:775–782
Altman GH, Horan RL, Lu HH, Moreau J, Martin I, Richmond JC, Kaplan DL (2002) Silk matrix for tissue engineered anterior cruciate ligament. Biomaterials 23:4131–4141
Altman GH, Horan RL, Martin I, Farhadi J, Stark PRH, Volloch V, Ricmond JC, Vunjak-Novakovic G, Kaplan DL (2002) Cell differentiation by mechanical stress. FASEB J 16:270– 272
Appelman TP, Mizrahi J, Seliktar D (2011) A finite element model of cell-matrix interactions to study the differential effect of scaffold composition on chondrogenic response to mechanical stimulation. J Biomech Eng 133(4):041010-1–041010-12
Baas E, Kuiper JH, Yang Y, Wood MA, El Haj AJ (2010) In vitro bone growth responds to local mechanical strain in three-dimensional polymer scaffolds. J Biomech 43:733–739
Bakker AD, Soejima K, Klein-Nulend J, Burger EH (2001) The production of nitric oxide and prostaglandin E2 by primary bone cells is shear stress dependent. J Biomech 34:671–677
Bawolin NK, Li MG, Chen XB, Zhang WJ (2010) Modeling material-degradation-induced elastic property of tissue engineering scaffolds. J Biomech Eng 132:111001-1–111001-7
Becker ST, Bolte H, Krapf O, Seitz H, Douglas T, Sivananthan S, Wiltfang J, Sherry E, Warnke PH (2009) Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction. Oral Oncol 45:181–188
Beynnon BD, Fleming BC (1998) Anterior cruciate ligament strain in-vivo: a review of previous work. J Biomech 31:519–525
Bicer EK, Lustig S, Servien E, Selmi TAS, Neyret P (2010) Current knowledge in the anatomy of the human anterior cruciate ligament. Knee Surg Sports Traumatol Arthrosc 18:1075–1084
Boccaccio A, Ballini A, Pappalettere C, Tullo D, Cantore S, Desiate A (2011) Finite element method (FEM), mechanobiology and biomimetic scaffolds in bone tissue engineering. Int J Biol Sci 7(1):112–132
Boschetti F, Raimondi MT, Migliavacca F, Dubini G (2006) Prediction of the micro-fluid dynamic environment imposed to three-dimensional engineered cell systems in bioreactors. J Biomech 39:418–425
Butler DL, Goldstein SA, Guilak F (2000) Functional tissue engineering: the role of biomechanics. J Biomech Eng 122:570–575
Byrne DP, Lacroix D, Planell JA, Kelly DJ, Prendergast PJ (2007) Simulation of tissue differentiation in a scaffold as a function of porosity, Young’s modulus and dissolution rate: application of mechanobiological models in tissue engineering. Biomaterials 28:5544–5554
Cai S, Xi J (2008) A control approach for pore size distribution in the bone scaffold based on the hexahedral mesh refinement. Comput Aided Des 40:1040–1050
Chan KS, Liang W, Francis WL, Nicolella DP (2010) A multiscale modeling approach to scaffold design and property prediction. J Mech Behav Biomed 3:584–593
Chen CS (2008) Mechanotransduction: a field pulling together? J Cell Sci 121:3285–3292
Chen VJ, Smith LA, Ma PX (2006) Bone regeneration on computer-designed nano-fibrous scaffolds. Biomaterials 27:3973–3979
Chen Y, Schellekens M, Zhou S, Cadman J, Li W, Appleyard R, Li Q (2011) Design optimization of scaffold microstructures using wall shear stress criterion towards regulated flow-induced erosion. J Biomech Eng 133:081008-1–081008-10
Chen Y, Zhou S, Cadman J, Li Q (2010) Design of cellular porous biomaterials for wall shear stress criterion. Biotechnol Bioeng 107(4):737–746
Chen Y, Zhou S, Li Q (2011) Microstructure design of biodegradable scaffold and its effect on tissue regeneration. Biomaterials 32:5003–5014
Cheung H-Y, Lau K-T, Lu T-P, Hui D (2007) A critical review on polymer-based bio-engineered materials for scaffold development. Compos Part B-Eng 38:291–300
Chiquet M, Renedo AS, Huber F, Flück M (2003) How do fibroblasts translate mechanical signals into changes in extracellular matrix production? Matrix Biol 22:73–80
Chung CA, Ho S-Y (2010) Analysis of collagen and glucose modulated cell growth within tissue engineered scaffolds. Ann Biomed Eng 38(4):1655–1663
Cinbiz MN, Tigli RS, Beskardes IG, Gumusderelioglu M, Colak U (2010) Computational fluid dynamics modeling of momentum transport in rotating wall perfused bioreactor for cartilage tissue engineering. J Biotechnol 150:389–395
Cooper JA, Lu HH, Ko FK, Freeman JW, Laurencin CT (2005) Fiber-based tissue-engineered scaffold for ligament replacement: design considerations and in vitro evaluation. Biomaterials 26:1523–1532
Dargel J, Gotter M, Mader K, Pennig D, Koebke J, Schmidt-Wiethoff R (2007) Biomechanics of the anterior cruciate ligament and implications for surgical reconstruction. Strat Traum Limb Recons 2:1–12
Deng D, Liu W, Xu F, Yang Y, Zhou G, Zhang WJ, Cui L, Cao Y (2009) Engineering human neo-tendon tissue in vitro with human dermal fibroblasts under static mechanical strain. Biomaterials 30:6724–6730
Discher DE, Janmey P, Wang Y-L (2005) Tissue cells feel and respond to the stiffness of their substrate. Science 310:1139–1143
Dormer NH, Berkland CJ, Detamore MS (2010) Emerging techniques in stratified designs and continuous gradients for tissue engineering of interfaces. Ann Biomed Eng 38:2121–2141
Durville D (2012) Contact-friction modeling within elastic beam assemblies: an application to knot tightening. Comput Mech. doi:10.1007/s00466-012-0683-0
Elomaa L, Teixeira S, Hakala R, Korhonen H, Grijpma DW, Seppälä JV (2011) Preparation of poly(e-caprolactone)-based tissue engineering scaffolds by stereolithography. Acta Biomater 7:3850–3856
Eshraghi S, Das S (2010) Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. Acta Biomater 6:2467–2476
Fan H, Liu H, Wong EJW, Toh SL, Goh JCH (2008) In vivo study of anterior cruciate ligament regeneration using mesenchymal stem cells and silk scaffold. Biomaterials 29:3324–3337
Fang Z, Starly B, Sun W (2005) Computer-aided characterization for effective mechanical properties of porous tissue scaffolds. Comput Aided Des 37:65–72
Fedorovich NE, Alblas J, Hennink WE, Oner FC, Dhert WJA (2011) Organ printing: the future of bone regeneration. Trends Biotechnol 29(12):601–606
Fierz FC, Beckmann F, Huser M, Irsen SH, Leukers B, Witte F, Degistirici O, Andronache A, Thie M, Müller B (2008) The morphology of anisotropic 3D-printed hydroxyapatite scaffolds. Biomaterials 29:3799–3806
Fleming BC, Renstrom PA, Beynnon BD, Engstrom B, Peura GD, Badger GJ, Johnson RJ (2001) The effect of weightbearing and external loading on anterior cruciate ligament strain. J Biomech 34:163–170
Freeman JW (2009) Tissue engineered devices for ligament repair, replacement and regeneration. Afr J Biotechnol 25:7182–7189
Gao B, Zheng NN (2010) Alterations in three-dimensional joint kinematics of anterior cruciate ligament-deficient and -reconstructed knees during walking. Clin Biomech 25:22–229
Ge Z, Goh JCH, Lee EH (2005) Selection of cell source for ligament tissue engineering. Cell Transplant 14:573–583
Gentleman E, Livesay GA, Dee KC, Nauman EA (2006) Development of ligament-like structural organization and properties in cell-seeded collagen scaffolds in vitro. Ann Biomed Eng 34:726–736
Geris L, Andreykiv A, Van Oosterwyck H, Vander Sloten J, Van Keulen F, Duyck J, Naert I (2004) Numerical simulation of tissue differentiation around loaded titanium implants in a bone chamber. J Biomech 37(5):763–769
Hiljanen-Vainio MP, Orava PA, Seppala JV (1997) Properties of ε-caprolactone/DL-lactide (ε -CL/DL-LA) copolymers with a minor ε-CL content. J Biomedical Mater Res 34:39–46
Hollister SJ (2005) Porous scaffold design for tissue engineering. Nat Mater 4(7):518–524
Hollister SJ (2009) Scaffold design and manufacturing: from concept to clinic. Adv Mater 21(32–33):3330–3342
Hollister SJ, Lin CY (2007) Computational design of tissue engineering scaffolds. Comput Methods Appl Mech Eng 196:2991–2998
Hollister SJ, Maddox RD, Taboas JM (2002) Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23:4095–4103
Hosseini A, Gill TJ, Li G (2009) In vivo anterior cruciate ligament elongation in response to axial tibial loads. J Orthop Sci 14:298–306
Hutmacher DW, Singh H (2008) Computational fluid dynamics for improved bioreactor design and 3D culture. Trends Biotechnol 26:166–172
Hutmacher DW, Sittinger M, Risbud MV (2004) Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 22(7):354–362
Ingber DE (2006) Cellular mechanotransduction: putting all the pieces together again. FASEB J 20:811–827
Isaksson H, van Donkelaar CC, Huiskes R, Ito K (2006) Corroboration of mechanoregulatory algorithms for tissue differentiation during fracture healing: comparison with in vivo results. J Orthop Res 24(5):898–907
Isaksson H, Wilson W, van Donkelaar CC, Huiskes R, Ito K (2006) Comparison of biophysical stimuli for mechano-regulation of tissue differentiation during fracture healing. J Biomech 39(8):1507–1516
Jaecques SVN, Van Oosterwyck H, Muraru L, Van Cleynenbreugel T, De Smet E, Wevers M, Naert I, Sloten JV (2004) Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone. Biomaterials 25:1683–1696
Jean A, EngelmayrJr GC Jr (2010) Finite element analysis of an accordion-like honeycomb scaffold for cardiac tissue engineering. J Biomech 43:3035–3043
Jeong SI, Kim B-S, Kang SW, Kwon JH, Lee YM, Kim SH (2004) In vivo biocompatibilty and degradation behavior of elastic poly-L-lactide-co-ε-caprolactone scaffolds. Biomaterials 25:5939–5946
Jiankang H, Dichen L, Yaxiong L, Bo Y, Bingheng L, Qin L (2007) Fabrication and characterization of chitosan-gelatin porous scaffolds with predefined internal microstructures. Polymer 48:4578–4588
Jones AC, Arns CH, Hutmacher DW, Milthorpe BK, Sheppard AP, Knackstedt MA (2009) The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth. Biomaterials 30:1440–1451
Jones JR, Poologasundarampillai G, Atwood RC, Bernard D, Lee PD (2007) Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds. Biomaterials 28:1404–1413
Jones RS, Nawana NS, Pearcy MJ, Learmonth DJA, Bickerstaff DR, Costi JJ, Paterson RS (1995) Mechanical properties of the human anterior cruciate ligament. Clin Biomech 10:339– 344
Kang H, Lin C-Y, Hollister SJ (2010) Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity. Struct Multi Optim 42(4):633–644
Karageorgiou V, Kaplan D (2005) Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26:5474–5491
Karmani S, Ember T (2003) The anterior cruciate ligament-II. Curr Orthop 18:49–57
Khoda AKMB, Ozbolat IT, Koc B (2011) Engineered tissue scaffolds with variational porous architecture. J Biomech Eng 133:011001-1–011001-12
Lacroix D, Chateau A, Ginebra M-P, Planell JA (2006) Micro-finite element models of bone tissue-engineering scaffolds. Biomaterials 27:5326–5334
Lacroix D, Planell JA, Prendergast PJ (2009) Computer-aided design and finite-element modelling of biomaterial scaffolds for bone tissue engineering. Philos Trans R Soc A 367:1993– 2009
Lacroix D, Prendergast PJ (2002) A mechano-regulation model for tissue differentiation during fracture healing: analysis of gap size and loading. Biomech Model Mech 35(9):1163– 1171
Lacroix D, Prendergast PJ, Li G, Marsh D (2002) Biomechanical model to simulate tissue differentiation and bone regeneration: application to fracture healing. Med Biol Eng Comp 40(1):14–21
Landers R, Pfister A, Hübner U, John H, Schmelzeisen R, Mülhaupt R (2002) Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques. J Mater Sci 37:3107–3116
Laurent CP, Durville D, Mainard D, Ganghoffer J-F, Rahouadj R (2012) A multilayer braided scaffold for anterior cruciate ligament: mechanical modeling at the fiber scale. J Mech Behav Biomed 12:184–196
Laurent CP, Ganghoffer J-F, Babin J, Six J-L, Wang X, Rahouadj R (2011) Morphological characterization of a novel scaffold for anterior cruciate ligament tissue engineering. J Biomech Eng 133:065001-1–065001-9
Lee K-W, Wang S, Dadsetan M, Yaszemski MJ, Lu L (2010) Enhanced cell ingrowth and proliferation through three-dimensional nanocomposite scaffolds with controlled pore structures. Biomacromolecules 11:682–689
Lee SJ, Kang H-W, Park JK, Rhie J-W, Hahn SK, Cho D-W (2008) Application of microstere-olithography in the development of three-dimensional cartilage regeneration scaffolds. Biomed Microdevices 10:233–241
Leong KF, Cheah CM, Chua CK (2003) Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 24:2363–2378
Lesman A, Blinder Y, Levenberg S (2010) Modeling of flow-induced shear stress applied on 3D cellular scaffolds: implications for vascular tissue engineering. Biotechnol Bioeng 105(3):645–654
Li G, DeFrate LE, Rubash HE, Gill TJ (2005) In vivo kinematics of the ACL during weightbearing knee flexion. J Orthop Res 23:340–344
Li J, Zhang L, Lv S, Li S, Wang N, Zhang Z (2011) Fabrication of individual scaffolds based on a patient-specific alveolar bone defect model. J Biotechnol 151:87–93
Lin CY, Kikuchi N, Hollister SJ (2004) A novel method for biomaterial scaffold internal architecture design to match bone elasticity with desired porosity. J Biomech 37:623–636
Lo C-M, Wang H-B, Dembo M, Wang Y-L (2000) Cell movement is guided by the rigidity of the substrate. Biophys J 79:144–152
Maes F, Van Ransbeeck P, Van Oosterwyck H, Verdonck P (2009) Modeling fluid flow through irregular scaffolds for perfusion bioreactors. Biotechnol Bioeng 103(3):621–630
McGarry JG, Klein-Nulend J, Mullender MG, Prendergast PJ (2005) A comparison of strain and fluid shear stress in stimulating bone cell responses: a computational and experimental study. FASEB J 19(3):482–484
Melchels FPW, Barradas AMC, van Blitterswijk CA, de Boer J, Feijen J, Grijpma DW (2010) Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. Acta Biomater 6:4208–4217
Melchels FPW, Feijen J, Grijpma DW (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials 31:6121–6130
Melchels FPW, Tonnarelli B, Olivares AL, Martin I, Lacroix D, Feijen J, Wendt DJ, Grijpma DW (2011) The influence of the scaffold design on the distribution of adhering cells after perfusion cell seeding. Biomaterials 32:2878–2884
Milan J-L, Planell JA, Lacroix D (2009) Computational modelling of the mechanical environment of osteogenesis within a polylactic acid-calcium phosphate glass scaffold. Biomaterials 30:4219–4226
Milan J-L, Planell JA, Lacroix D (2010) Simulation of bone tissue formation within a porous scaffold under dynamic compression. Biomech Model Mech 9:583–596
Mironov V, Visconti RP, Kasyanov V, Forgacs G, Drake CJ, Markwald RR (2009) Organ printing: tissue spheroids as building blocks. Biomaterials 30:2164–2174
Moraiti CO, Stergiou N, Vasiliadis HS, Motsis E, Georgoulis A (2010) Anterior cruciate ligament reconstruction results in alterations in gait variability. Gait Posture 32:169–175
Moroni L, De Wijn JR, Van Blitterswijk CA (2005) 3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties. Biomaterials 27:974–985
Murphy CM, Haugh MG, O’Brien FJ (2010) The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. Biomaterials 31(3):461–466
Norato JA, Wagoner Johnson AJ (2011) A computational and cellular solids approach to the stiffness-based design of bone scaffolds. J Biomech Eng 133:091003-1–091003-8
Oh SH, Park IK, Kim JM, Lee JH (2007) In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. Biomaterials 28:1664–1671
Olivares AL, Marsal E, Planell JA, Lacroix D (2009) Finite element study of scaffold architecture design and culture conditions for tissue engineering. Biomaterials 30:6142–6149
Owen SC, Shoichet MS (2010) Design of three-dimensional biomimetic scaffolds. J Biomed Mater Res A 94(4):1321–1331
Park S, GeunHyung K, Yong CJ, YoungHo K, WanDoo K (2009) 3D polycaprolactone scaffolds with controlled pore structure using a rapid prototyping system. J Mater Sci 20:229–234
Park SH, Kim TG, Kim HC, Yang D-Y, Park TG (2008) Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration. Acta Biomater 4:1198–1207
Peiffer V, Gerisch A, Vandepitte D, Van Oosterwyck H, Geris L (2011) A hybrid bioregulatory model of angiogenesis during bone fracture healing. Biomech Model Mech 10(3):383–395
Petrigliano FA, McAllister DR, Wu BM (2006) Tissue engineering for anterior cruciate ligament reconstruction—a review of current strategies. Arthroscopy 22:441–451
Plaweski S, Grimaldi M, Courvoisier A, Wimsey S (2011) Intraoperative comparisons of knee kinematics of double-bundle versus single-bundle anterior cruciate ligament reconstruction. Knee Surg Sports Traumatol Arthrosc 19(8):1277–1286
Porter B, Zauel R, Stockman H, Guldberg R, Fyhrie D (2005) 3-D computational modeling of media flow through scaffolds in a perfusion bioreactor. J Biomech 38:543–549
Potluri P, Rawal A, Rivaldi M, Porat I (2003) Geometrical modelling and control of a triaxial braiding machine for producing 3D performs. Compos Part A-Appl Sci Manuf 34:481–492
Prendergast PJ (2007) Computational modelling of cell and tissue mechanoresponsiveness. Gravit Space Biol 20(2):43–50
Prendergast PJ, Huiskes R, Soballe K (1997) Biophysical stimuli on cells during tissue differentiation at implant interfaces. J Biomech 30(6):539–548
Raeber GP, Lutolf MP, Hubbell JA (2008) Part II: fibroblasts preferentially migrate in the direction of principal strain. Biomech Model Mech 7:215–225
Rainer A, Giannitelli SM, Accoto D, De Porcellinis S, Guglielmelli E, Trombetta M (2012) Load-adaptative scaffold architecturing: a bioinspired approach to the design of porous additively manufactured scaffolds with optimized mechanical properties. Ann Biomed Eng 40(4):966–975
Rajagopalan S, Robb RA (2006) Schwarz meets Schwann: design and fabrication of biomor-phic and durataxic tissue engineering scaffolds. Med Image Anal 10:693–712
Roshan-Ghias A, Lambers FM, Gholam-Rezaee M, Müller R, Pioletti DP (2011) In vivo loading increases mechanical properties of scaffold by affecting bone formation and bone resorption rates. Bone 49:1357–1364
Saito E, Kang H, Taboas JM, Diggs A, Flanagan CL, Hollister SJ (2010) Experimental and computational characterization of designed and fabricated 50–50 PLGA porous scaffolds for human trabecular bone applications. J Mater Sci-Mater Med 21:2371–2383
Sandino C, Lacroix D (2011) A dynamical study of the mechanical stimuli and tissue differentiation within a CaP scaffold based on micro-CT finite element models. Biomech Model Mech 10(4):565–576
Sandino C, Planell JA, Lacroix D (2008) A finite element study of mechanical stimuli in scaffolds for bone tissue engineering. J Biomech 41:1005–1014
Sanz-Herrera JA, Doblaré M, Garcia-Aznar JM (2010) Scaffold microarchitecture determines internal bone directional growth structure: a numerical study. J Biomech 43:2480–2486
Sanz-Herrera JA, Garcia-Aznar JM, Doblaré M (2008) Micro-macro numerical modelling of bone regeneration in tissue engineering. Comput Methods Appl Mech Eng 197:3092–3107
Sanz-Herrera JA, Garcia-Aznar JM, Doblaré M (2009) On scaffold designing for bone regeneration: a computational multiscale approach. Acta Biomater 5:219–229
Sengers BG, Taylor M, Please CP, Oreffo ROC (2007) Computational modelling of cell spreading and tissue regeneration in porous scaffolds. Biomaterials 28:1926–1940
Shen W, Jordan S, Fu F (2007) Review article: anatomic double bundle anterior cruciate ligament reconstruction. J Orthop Surg 15:216–221
Silva MMCG, Cyster LA, Barry JJA, Yang XB, Oreffo ROC, Grant DM, Scotchfor CA, Howdle SM, Shakesheff KM, Rose FRAJ (2006) The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds. Biomaterials 27:5909–5917
Singh H, Teoh SH, Low HT, Hutmacher DW (2005) Flow modelling within a scaffold under the influence of uni-axial and bi-axial bioreactor rotation. J Biotechnol 119:181–196
Starly B, Lau W, Bradbury T, Sun W (2006) Internal architecture design and freeform fabrication of tissue replacement structures. Comput Aided Des 38:115–124
Stops AJF, Harrison NM, Haugh MG, O’Brien FJ, McHugh PE (2010) Local and regional mechanical characterisation of a collagen-glycosaminoglycan scaffold using high-resolution finite element analysis. J Mech Behav Biomed 3:292–302
Stops AJF, Heraty KB, Browne M, O’Brien FJ, McHugh PE (2010) A prediction of cell differentiation and proliferation within a collagen-glycosaminoglycan scaffold subjected to mechanical strain and perfusive fluid flow. J Biomech 43:618–626
Stops AJF, MacMahon LA, O’Mahoney D, Prendergast P, McHugh PE (2008) A finite element prediction of strain on cells in a highly porous collagen-glycosaminoglycan scaffold. J Biomech Eng 130:061001-1–061001-11
Sturm S, Zhou S, Mai Y-W, Li Q (2010) On stiffness of scaffolds for bone tissue engineering: a numerical study. J Biomech 43:1738–1744
Sudarmadji N, Tan JY, Leong KF, Chua CK, YLoh YT (2011) Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. Acta Biomater 7:530–537
Sun W, Lal P (2002) Recent development on computer aided tissue engineering: a review. Comput Methods Prog Bio 67:85–103
Sun W, Starly B, Nam J, Darling A (2005) Bio-CAD modeling and its applications in computer-aided tissue engineering. Comput Aided Des 37:1097–1114
Sun X, Sun C (2004) Mechanical properties of three-dimensional braided composites. Compos Struct 65:485–492
Tellis BC, Szivek JA, Bliss CL, Margolis DS, Vaidyanathan RK, Calvert P (2008) Trabecular scaffolds created using micro CT guided fused deposition modeling. Mater Sci Eng C 28:171– 178
Toutoungi DE, Lu TW, Leardini A, Catani F, O’Connor JJ (2000) Cruciate ligament forces in the human knee during rehabilitation exercises. Clin Biomech 15:176–187
Tsang VL, Bhatia SN (2004) Three-dimensional tissue fabrication. Adv Drug Deliv Rev 56:1635–1647
Tuan HS, Hutmacher DW (2005) Application of micro CT and computation modeling in bone tissue engineering. Comput Aided Des 37:1151–1161
Unwin A (2010) What’s new in anterior cruciate ligament surgery. Orthop Traum 24(2):100– 106
Vaquette C, Kahn C, Frochot C, Nouvel C, Six J-L, De Isla N, Luo L-H, Cooper-White J, Rahouadj R, Wang X (2010) Aligned poly(L-lactic-co-e-caprolactone) electrospun microfibers and knitted structure: a novel composite scaffold for ligament tissue engineering. J Biomed Mater Res A 94(4):1270–1282
Vilay V, Mariatti M, Ahmad Z, Pasomsouk K, Todo M (2009) Characterization of the Mechanical and Thermal Properties and Morphological Behavior of Biodegradable Poly(L-lactide)/Poly(ε-caprolactone) and Poly(L-lactide)/Poly(butylene succinate-co-L-lactate) Polymeric Blends. J Appl Polym Sci 114:1784–1792
Voronov R, VanGordon S, Sikavitsas VI, Papavassiliou DV (2010) Computational modeling off flow-induced shear stresses within 3D salt-leached porous scaffolds imaged via micro-CT. J Biomech 43:1279–1286
Vunjak-Novakovic G, Altman G, Horan K, Kaplan DL (2004) Tissue engineering of ligaments. Ann Biomed Eng 6:131–156
Webb K, Hitchcock RW, Smeal RM, Li W, Gray SD, Tresco PA (2006) Cyclic strain increases fibroblast proliferation, matrix accumulation, and elastic modulus of fibroblast-seeded polyurethane constructs. J Biomech 39:1136–1144
Wettergreen MA, Bucklen BS, Starly B, Yuksel E, Sun W, Liebschner MAK (2005) Creation of a unit block library of architectures for use in assembled scaffold engineering. Comput Aided Des 37:1141–1149
Williams JM, Adewunmi A, Schek RM, Flanagan CL, Krebsbach PH, Feinberg SE, Hollister SJ, Das S (2005) Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26:4817–4827
Yao J, Turteltaub SR, Ducheyne P (2006) A three-dimensional nonlinear finite element analysis of the mechanical behavior of tissue engineered intervertebral discs under complex loads. Biomaterials 27:377–387
Yasuda K, Tanabe Y, Kondo E, Kitamura N, Tohyama H (2010) Anatomic double-bundle anterior cruciate ligament reconstruction. J Orthop Sci 26:S21–S34
Yeong W-Y, Chua C-K, Leong K-F, Chandrasekaran M (2004) Rapid prototyping in tissue engineering—challenges and potential. Trends Biotechnol 22(12):643–652
Yoo DJ (2011) Porous scaffold design using the distance field and triply periodic minimal surface models. Biomaterials 32:7741–7754
Zantop T, Petersen W, Sekiya JK, Musahl V, Fu FH (2006) Anterior cruciate ligament anatomy and function relating to anatomical reconstruction. Knee Surg Sports Traumatol Arthrosc 14:982–992
Zein I, Hutmacher DW, Tan KC, Teoh SH (2002) Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23:1169–1185
Zhang Q, Beale D, Broughton RM (1999) Analysis of circular braiding process, part 1: theoretical investigation of kinematics of the circular braiding process. J Manuf Sci Eng-T ASME 121:345–350
