Profil

Duysinx Pierre

Vice-Recteur à la mobilité et à l'international

Département d'aérospatiale et mécanique > Ingénierie des véhicules terrestres

A&M

See author's contact details
ORCID
0000-0001-7870-3628

Main Referenced Co-authors
Bruls, Olivier  (47)
Bauduin, Simon  (25)
Fleury, Claude  (25)
Van Miegroet, Laurent  (25)
Fernandez Sanchez, Eduardo Felipe  (24)
Main Referenced Keywords
Topology optimization (43); Structural optimization (14); Shape optimization (12); stress constraints (11); topology optimization (11);
Main Referenced Unit & Research Centers
ADAS Department of ika - RWTH Aachen University (1)
ADAS department of ika - RWTH Aachen University (1)
Main Referenced Disciplines
Mechanical engineering (185)
Aerospace & aeronautics engineering (71)
Electrical & electronics engineering (19)
Engineering, computing & technology: Multidisciplinary, general & others (16)
Mathematics (8)

Publications (total 210)

The most downloaded
7865 downloads
Géradin, M., & Duysinx, P. (2004). AN INTRODUCTION TO ROBOTICS: MECHANICAL ASPECTS. (ULiège - Université de Liège, MECA0089-1 Robotique: aspects mécaniques). https://hdl.handle.net/2268/25611
The most cited
589 citations (Scopus®)
Duysinx, P., & Bendsoe, M. P. (1998). Topology Optimization of Continuum Structures with Local Stress Constraints. International Journal for Numerical Methods in Engineering, 43, 1453-1478. doi:10.1002/(SICI)1097-0207(19981230)43:8<1453::AID-NME480>3.0.CO;2-2 https://hdl.handle.net/2268/4420

Cherrière, T., Laurent, L., Hlioui, S., Louf, F., Duysinx, P., Geuzaine, C., Ben Ahmed, H., Gabsi, M., & Fernandez Sanchez, E. F. (December 2022). Multi-material topology optimization using Wachspress interpolations for designing a 3-phase electrical machine stator. Structural and Multidisciplinary Optimization, 65 (12). doi:10.1007/s00158-022-03460-1
Peer Reviewed verified by ORBi

Papadimitriou, D., & Duysinx, P. (2022). FUTURE MOVE: A review of the main trends in the automotive sector at horizon 2030 in the Great Region.

MITJANA, F., CAFIERI, S., BUGARIN, F., SEGONDS, S., CASTANIE, F., & Duysinx, P. (10 November 2021). Topological gradient in structural optimization under stress and buckling constraints. Applied Mathematics and Computation, 409, 126032. doi:10.1016/j.amc.2021.126032
Peer Reviewed verified by ORBi

Koutla, I., Duysinx, P., Deserranno, C., Jossieaux, J., Bruyneel, M., Eykens, P., & Lopez, C. (17 June 2021). New concepts of lightweight gearbox rear covers made of aluminum and plastic using multi-material topology optimization. Paper presented at 14th Wolrd Congress of Structural and Multidisciplinary Optimization, Boulder, Colorado, United States.

Eykens, P., Naets, F., Deckers, E., Rosseel, E., Schuette, H., Koutla, I., Diltoer, R., Lopez, C., & Duysinx, P. (2021). A generic approach to capitalize manufacturing experience in design and optimization. In C. O'Reilly, Boij, C. Casanueva, ... P. Göransson, Proceedings of the Resource Efficient Vehicles Conference - 2021 (rev2021).
Peer reviewed

Duysinx, P., Weber, W., Remes, J., Stroobants, J., De Bruijn, F., Heijster, J.-P., Deckers, E., Lopez, C., & Eykens, P. (14 June 2021). Truck door light weight designs using topology optimization. Paper presented at 14th World Congress of Structural and Multidisciplinary Optimization, Boulder , Colorado, United States.

Alarcon Soto, P., & Duysinx, P. (June 2021). Topology optimization in OpenFOAM: how to define the maximum inverse permeability to consider manufacturing constraint. Paper presented at 14th World Congress of Structural and Multidisciplinary Optimization.

Fernandez Sanchez, E. F., Ayas, C., Langelaar, M., & Duysinx, P. (April 2021). Topology Optimization for Large-Scale Additive Manufacturing: Generating designs tailored to the deposition nozzle size. Virtual and Physical Prototyping, 16:2, 196-220. doi:10.1080/17452759.2021.1914893
Peer Reviewed verified by ORBi

Trillet, D., Duysinx, P., & Fernandez Sanchez, E. F. (2021). Analytical relationships for imposing minimum length scale inthe robust Topology Optimization formulation. Structural and Multidisciplinary Optimization, 64, 2429–2448. doi:10.1007/s00158-021-02998-w
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., Yang, K.-K., Koppen, S., Alarcon Soto, P., Bauduin, S., & Duysinx, P. (15 August 2020). Imposing minimum and maximum member size, minimum cavity size, and minimum separation distance between solid members in topology optimization. Computer Methods in Applied Mechanics and Engineering, 368. doi:10.1016/j.cma.2020.113157
Peer Reviewed verified by ORBi

Bauduin, S., Alarcon Soto, P., Fernandez Sanchez, E. F., & Duysinx, P. (23 March 2020). Misalignment topology optimization with manufacturing constraints. Structural and Multidisciplinary Optimization, 61 (6), 2467-2480. doi:10.1007/s00158-020-02496-5
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., & Duysinx, P. (12 September 2019). Length scale control and building orientation in topology optimization for additive manufacturing. Paper presented at II Interational Conference on Simulation for Additive Manufacturing (SIM-AM 2019), Pavia, Italy.

Fernandez Sanchez, E. F., Collet, M., Alarcon Soto, P., Bauduin, S., & Duysinx, P. (2019). An aggregation strategy of maximum size constraints in density-based topology optimization. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-019-02313-8
Peer Reviewed verified by ORBi

Yang, K.-K., Fernandez Sanchez, E. F., Niu, C., Duysinx, P., Zhu, J., & Zhang, W. (2019). Note on Spatial Gradient Operators and Gradient-based Minimum Length Constraints in SIMP Topology Optimization. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-019-02269-9
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., Yang, K., Koutla, I., Alarcon Soto, P., Bauduin, S., & Duysinx, P. (2019). An overhang constraint adaptable to a proper building orientation. In World Congress of Structural and Multidisciplinary Optimization (WCSMO13), May 20-24, 2019, Beijing, China.
Peer reviewed

Alarcon Soto, P., Fernandez Sanchez, E. F., Bauduin, S., & Duysinx, P. (2019). Imposing Manufacturing Constraints in Topological Optimization of 2D Fuel Cell flow problems using OpenFOAM. In Proceedings of the 13th World Congress of Structural and Multidisciplinary Optimization (WCSMO-13).
Peer reviewed

Bauduin, S., Alarcon Soto, P., Fernandez Sanchez, E. F., Bruyneel, M., Jossieaux, J., Vaassen, J.-M., & Duysinx, P. (May 2019). Misalignment topology optimization with manufacturing constraints. Paper presented at 13th World Congress of Structural and Multidisciplinary Optimization, Beijin, China.

Duysinx, P. (2018). L'évolution de l'industrie automobile face aux tendances globales de la société. Paper presented at Réception de fin d'année de TRAXIO Wallonie-Bruxelles, Bruxelles, Belgium.

Kuci, E., Henrotte, F., Duysinx, P., & Geuzaine, C. (23 November 2018). Combination of topology optimization and Lie derivative-based shape optimization for electro-mechanical design. Structural and Multidisciplinary Optimization, 59 (5), 1723-1731. doi:10.1007/s00158-018-2157-2
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., & Duysinx, P. (08 October 2018). Imposing the distance between solid members generated by maximum size constraints in topology optimization. Poster session presented at IUTAM Symposium on When topology optimization meets additive manufacturing – theory and methods, Dalian, China.

Collet, M., Bauduin, S., Fernandez Sanchez, E. F., Alarcon Soto, P., & Duysinx, P. (17 September 2018). Critical Plane approach for fatigue resistance using stress-based topology optimization. Paper presented at 6th International Conference on Engineering Optimization, Lisbonne, Portugal.

Fernandez Sanchez, E. F., Collet, M., Bauduin, S., Alarcon Soto, P., & Duysinx, P. (17 September 2018). Constraints Aggregation in Topology Optimization. Paper presented at 6th International Conference on Engineering Optimization - EngOpt 2018, Lisboa, Portugal.

Alarcon Soto, P., Fernandez Sanchez, E. F., Bauduin, S., Collet, M., & Duysinx, P. (September 2018). Development of a Topological Optimization framework for 2D problems using OpenFOAM. Paper presented at 6 th International Conference on Engineering Optimization EngOpt2018, Lisbon, Portugal.

Fernandez Sanchez, E. F., Collet, M., Bauduin, S., Alarcon Soto, P., Lemaire, E., & Duysinx, P. (02 May 2018). Imposing minimum gap distance in topology optimization through maximum size constraints. Paper presented at 3rd Workshop on Metal Additive Manufacturing, Liège, Belgium.

Duysinx, P. (2018). Électriques, hybrides, autonomes… Quelle mobilité pour demain ? Paper presented at Sciences.be, Mons, Belgium.

Duysinx, P. (2018). Societal megatrends and trends in vehicle technologies. Paper presented at ECOFORUM - Brussels Motor Show, Brussels, Belgium.

Bauduin, S., Alarcon Soto, P., Fernandez Sanchez, E. F., Collet, M., Satoru, I., & Duysinx, P. (2018). MISALIGNMENT TOPOLOGY OPTMIZATION. Paper presented at 6th International Conference on Engineering Optimization, Lisbon, Portugal.

Bauduin, S., Collet, M., Fernandez Sanchez, E. F., Alarcon Soto, P., & Duysinx, P. (2018). OVERHANGING CONSTRAINTS IN ADDITIVE MANUFACTURINGUSING TWODIFFERENT TOOLS. Poster session presented at 3rd Workshop on Metal Additive Manufacturing, Liège, Belgium.

Tromme, E., Held, A., Duysinx, P., & Bruls, O. (2018). System-based approaches for structural optimization of flexible mechanisms. Archives of Computational Methods in Engineering, 25 (817-844). doi:10.1007/s11831-017-9215-6
Peer reviewed

Kuci, E., Velasco, J., Henrotte, F., Duysinx, P., & Geuzaine, C. (17 November 2017). Three-dimensional Topology Optimization of Planar Multilayer Busbar. Paper presented at 9th European Conference on Numerical Methods in Electromagnetics (NUMELEC 2017), Paris, France.

Collet, M., Bauduin, S., Fernandez Sanchez, E. F., & Duysinx, P. (15 September 2017). Fatigue resistant designs using stress-based topology optimization. Paper presented at IV ECCOMAS YOUNG INVESTIGATOR CONFERENCE, Milan, Italy.

Fernandez Sanchez, E. F., Collet, M., Bauduin, S., Lemaire, E., & Duysinx, P. (14 September 2017). Contributions to handle maximum size constraints in density-based topology optimization. Paper presented at Young Investigators Conference 2017, Milano, Italy.

Collet, M., Bauduin, S., Fernandez Sanchez, E. F., & Duysinx, P. (08 June 2017). Fatigue resistant designs using stress-based topology optimization. Paper presented at 12th World Congress of Structural and Multidisciplinary Optimization, Braunschweig, Germany.

Alarcon Soto, P., Collet, M. (Other coll.), Bauduin, S. (Other coll.), Fernandez Sanchez, E. F. (Other coll.), Martinez Aguilera, A. (Other coll.), & Duysinx, P. (Other coll.). (07 June 2017). Topology optimization of mechanical components fabricated by additive manufacturing for a Shell Eco Marathon vehicle. Paper presented at 12th World Congress of Structural and Multidisciplinary Optimisation, Braunschweig, Germany.

Fernandez Sanchez, E. F., Collet, M., Bauduin, S., Lemaire, E., & Duysinx, P. (2017). Contributions to handle maximum size constraints in density-based topology optimization. In S. Fiebig, K.-U. Bletzinger, K. Maute, A. Schumacher (Ed.), ... T. Vietor (Ed.), Advances in Structural and Multidisciplinary Optimization (pp. 1054-1068). Cham, Switzerland: Springer International Publishing. doi:10.1007/978-3-319-67988-4_80
Peer reviewed

Bruyneel, M., Duysinx, P., Fernandez Sanchez, E. F., & Grihon, S. (June 2017). Optimisation of variable thickness composite structures with design rules and manufacturing constraints, based on continuous design variables. Paper presented at NAFEMS World Congress, Stockholm, Sweden.

Kuci, E., Henrotte, F., Duysinx, P., & Geuzaine, C. (2017). Shape and Topology Optimization of Electrical Machines using Lie Derivative-Based Analytical Sensitivity Analysis. In 2016 IEEE Conference on Electromagnetic Field Computation (CEFC). doi:10.1109/CEFC.2016.7815990
Peer reviewed

Noel, L., Duysinx, P., & maute, K. (2017). Level set topology optimization considering damage. Structural and Multidisciplinary Optimization, 56, 737-753. doi:10.1007/s00158-017-1724-2
Peer Reviewed verified by ORBi

Kuci, E., Henrotte, F., Duysinx, P., & Geuzaine, C. (2017). Design sensitivity analysis for shape optimization based on the Lie derivative. Computer Methods in Applied Mechanics and Engineering. doi:10.1016/j.cma.2016.12.036
Peer Reviewed verified by ORBi

Collet, M., Bruggi, M., Noël, L., Bauduin, S., & Duysinx, P. (12 September 2016). Microstructural design using stress–based topology optimization. Paper presented at 4th European Conference on Computational Optimization, Leuven, Belgium.

Bauduin, S., Collet, M., & Duysinx, P. (12 September 2016). Overhanging Constraints in Addivitive Manufacturing Using Two Different Tools. Paper presented at 4th European Conference on Computational Optimization, Leuven, Belgium.

Noël, L., Duysinx, P., & Maute, K. (September 2016). Structural design considering damage within an XFEM-level set framework. Paper presented at 4th European Conference on Computational Optimization.

Bauduin, S., Collet, M., & Duysinx, P. (23 August 2016). Overhanging Constraints in Addivitive Manufacturing Using Two Different Tools. Poster session presented at 24th International Congress of Theoretical and Applied Mechanics, Montréal, Canada.

Collet, M., Bruggi, M., Noël, L., Bauduin, S., & Duysinx, P. (22 August 2016). Design of microstructures using stress-based topology optimization. Paper presented at 24th International Congress of Theoretical and Applied Mechanics, Montréal, Canada.

Noël, L., Duysinx, P., & Maute, K. (August 2016). Structural design under damage constraints with XFEM and level sets. Paper presented at 24th International Congress of Theoretical and Applied Mechanics.

Collet, M., Bruggi, M., & Duysinx, P. (2016). Topology optimization for minimum weight with compliance and simpli ed nominal stress constraints for fatigue resistance. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-016-1510-6
Peer Reviewed verified by ORBi

Kuci, E., Henrotte, F., Duysinx, P., Dular, P., & Geuzaine, C. (March 2016). Design Sensitivity Analysis for Shape Optimization of Nonlinear Magnetostatic Systems. IEEE Transactions on Magnetics, 52 (3). doi:10.1109/TMAG.2015.2478196
Peer Reviewed verified by ORBi

Tromme, E., Sonneville, V., Bruls, O., & Duysinx, P. (February 2016). On the equivalent static load method for flexible multibody systems described with a nonlinear finite element formalism. International Journal for Numerical Methods in Engineering, 108 (6), 646-664. doi:10.1002/nme.5237
Peer Reviewed verified by ORBi

Tromme, E., Sonneville, V., Guest, J. K., Bruls, O., & Duysinx, P. (2016). On the equivalent static load method for the structural optimization of mechanical systems accounting for multicomponent-based constraints. In Proceedings of the ECCOMAS Congress (pp. 1).
Peer reviewed

Noël, L., Van Miegroet, L., & Duysinx, P. (2016). Analytical sensitivity analysis using the extended finite element method in shape optimization of bimaterial structures. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.5181
Peer Reviewed verified by ORBi

Noël, L., & Duysinx, P. (2016). Shape optimization of microstructural designs subject to local stress constraints within an XFEM-level set framework. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-016-1642-8
Peer Reviewed verified by ORBi

Virlez, G., Bruls, O., Duysinx, P., Géradin, M., & Cardona, A. (2016). Unilateral contact condition enhanced with squeeze film modelling in automotive differentials. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science, 230 (7-8), 1243-1257. doi:10.1177/0954406216638883
Peer Reviewed verified by ORBi

Tromme, E., Bruls, O., & Duysinx, P. (2016). Weakly and fully coupled methods for structural optimization of flexible mechanisms. Multibody System Dynamics, 38 (4), 391-417. doi:10.1007/s11044-015-9493-4
Peer reviewed

Bauduin, S., Collet, M., Duysinx, P., Garray, D. (Other coll.), & Gravet, D. (Other coll.). (09 July 2015). Deterministic Manufacturing constraints for Optimal Distribution in the Case of Additive Manufacturing. Paper presented at 9th European Solid Mechanics Conference, Madrid, Spain.

Collet, M., Bruggi, M., Bauduin, S., Ruffoni, D., & Duysinx, P. (09 July 2015). Simplified fatigue resistance in mechanical engineering using topology optimization. Paper presented at 9th European Solid Mechanics Conference, Madrid, Spain.

Duysinx, P. (07 July 2015). Stress constrained topology optimization for additive manufacturing: Specific character and solution aspects. Paper presented at 9th European Solid Mechanics Conference, Madrid, Spain.

Tromme, E., Sonneville, V., Bruls, O., & Duysinx, P. (02 July 2015). Optimal design of flexible mechanisms using the Equivalent Static Load method and a Lie group formalism. Paper presented at ECCOMAS Thematic Conference on Multibody Dynamics, Barcelone, Spain.

Tromme, E., Tortorelli, D., Bruls, O., & Duysinx, P. (2015). Structural optimization of multibody system components described using level set techniques. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-015-1280-6
Peer Reviewed verified by ORBi

Duysinx, P., Collet, M., Bauduin, S., Tromme, E., Noël, L., & Bruggi, M. (08 June 2015). Topology optimization of mechanical and aerospace components subject to fatigue stress constraints. Paper presented at 11th World Congress on Strucural and Multidisciplinary Optimization, Sydney, Australia.

Tromme, E., Tortorelli, D., Bruls, O., & Duysinx, P. (08 June 2015). A level set approach for the structural optimization of flexible mechanisms. Paper presented at 11th World Congress on Structural and Multidisciplinary Optimization, Sydney, Australia.

Kuci, E., Geuzaine, C., Dular, P., & Duysinx, P. (07 June 2015). Direct and Adjoint Sensitivity Analysis of Nonlinear Magnetostatic System: Application to Shape Optimization of Electrical Machines. Paper presented at 11th World Congress on Structural and Multidisciplinary Optimization.

Kuci, E., Duysinx, P., Dular, P., & Geuzaine, C. (June 2015). Design Sensitivity Analysis for Shape Optimization of Nonlinear Magnetostatic Systems. Paper presented at COMPUMAG 2015 (20th Conference on the Computation of Electromagnetic Fields), Montréal, Canada.

Noël, L., Duysinx, P., & Maute, K. (2015). Damage process sensitivity analysis using an XFEM-Level Set framework. In Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimization (WCSMO-11).
Peer reviewed

Louvigny, Y., Nzisabira, J., Meunier, B., & Duysinx, P. (2015). L'optimisation topologique et la fabrication additive, amélioration de la chaine de conception. In 14ème colloque national AIP PRIMECA : Produits, Procédés, Systèmes intelligents et durables (pp. 220-224).
Peer reviewed

Duysinx, P. (08 January 2015). Quelle voiture pour demain? Existence des solutions alternatives et évolution nécessaire des systèmes de transport collectifs et individuels. Paper presented at Module Sciences et Avenir. Cycle 2: L'avenir des moyens de transport, Liège, Belgium.

Collet, M., Bruggi, M., Bauduin, S., & Duysinx, P. (2015). Stress-based topology optimization with fatigue failure constraints. In Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing.

Noël, L., & Duysinx, P. (08 September 2014). Shape optimization of bimaterial (micro)structures using XFEM and a level set description. Paper presented at 4th International conference on engineering Optimization, Lisbonne, Portugal.

Louvigny, Y., & Duysinx, P. (21 July 2014). Calculation of crankshaft twist angle using multibody simulation and finite element method. Paper presented at 11th World Congress on Computational Mechanics, Barcelone, Spain.

Virlez, G., Bruls, O., Tromme, E., Duysinx, P., & Géradin, M. (02 July 2014). Dynamic simulation of flexible gear pairs using a contact modelling between superelements. Paper presented at The 3rd Joint International Conference on Multibody System Dynamics & The 7th Asian Conference on Multibody Dynamics, Busan, South Korea.

Noël, L., & Duysinx, P. (05 June 2014). Sensitivity analysis with the extended finite element method on bimaterial structures. Paper presented at International Conference on Engineering and Applied Sciences Optimization (OPT-i 2014), Kos, Greece.

Tromme, E., Bruls, O., Duysinx, P., Virlez, G., & Tortorellli, D. (June 2014). A semi-analytical sensitivity analysis for multibody systems described using Level Sets. Paper presented at First International Conference on Engineering and Applied Sciences Optimization, Kos, Greece.

Kuci, E., Geuzaine, C., Dular, P., & Duysinx, P. (2014). Shape Optimization of Interior Permanent Magnet Motor for Torque Ripple Reduction. In Proceedings of The 4th International Conference on Engineering Optimization: Lisbon (Portugal), 8-11 September 2014.
Peer reviewed

TONG, G., ZHANG, W., & Duysinx, P. (December 2013). Simultaneous design of structural layout and discrete fiber orientation using bi-value coding parameterization and volume constraint. Structural and Multidisciplinary Optimization, 48 (6), 1075-1088. doi:10.1007/s00158-013-0948-z
Peer Reviewed verified by ORBi

Tromme, E., Bruls, O., Emonds-Alt, J., Bruyneel, M., Virlez, G., & Duysinx, P. (December 2013). Discussion on the optimization problem formulation of flexible components in multibody systems. Structural and Multidisciplinary Optimization, 48 (6), 1189-1206. doi:10.1007/s00158-013-0952-3
Peer Reviewed verified by ORBi

Duysinx, P., Guillermo Alonso, M., Gao, T., Remouchamps, A., & Bruyneel, M. (September 2013). Comparison of parameterization schemes for solving the discrete material optimization problem of composite structures. Paper presented at COMPOSITES 2103 - IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, San Miguel (Açores), Portugal.

Virlez, G., Bruls, O., Sonneville, V., Tromme, E., Duysinx, P., & Géradin, M. (2013). Contact model between superelements in dynamic multibody systems. In Proceedings of ASME2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013. doi:10.1115/DETC2013-13469
Peer reviewed

Lemaire, J., Nzisabira, J., & Duysinx, P. (June 2013). EVALUATION OF PERFORMANCES OF HYBRID ELECTRIC ENERGY STORAGE SYSTEM (LI-ION BATTERIES/ SUPERCAPACITORS) EV AND HEV APPLICATIONS. Paper presented at ISEECap2013, Taormina, Italy.

Duysinx, P., Guillermo Alonso, M., Tong, G., & Bruyneel, M. (2013). Comparison of parameterization schemes for solving the discrete material optimization problem of composite structures. In R. Halftka & N. H. KIM (Eds.), Proceeding of the 10th World Congress on Structural And Multidisciplinary Optimization.

Noël, L., Van Miegroet, L., & Duysinx, P. (2013). Shape optimization of periodic microstructures subject to stiffness and local stress constraints. In Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization: Orlanda (USA), 19-24 mai 2013.

Tromme, E., Bruls, O., Virlez, G., & Duysinx, P. (2013). Structural optimization of flexible components under dynamic loading within a multibody system approach: a comparative evaluation of optimization methods based on a 2-dof robot application. In Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization: Orlanda (USA), 19-24 mai 2013.

Bruggi, M., & Duysinx, P. (February 2013). A stress-based approach to the optimal design of structures with unilateral behavior of material or supports. Structural and Multidisciplinary Optimization, 48, 311-326. doi:10.1007/s00158-013-0896-7
Peer Reviewed verified by ORBi

Virlez, G., Bruls, O., Tromme, E., & Duysinx, P. (10 January 2013). Modeling of joints with clearance and friction in multibody dynamic simulation of automotive differentials. Theoretical and Applied Mechanics Letters, 3 (1), 013003. doi:10.1063/2.1301303
Peer Reviewed verified by ORBi

Lemaire, E., Van Miegroet, L., Tromme, E., Noël, L., & Duysinx, P. (2013). Eigenproblem formulation for electromechanical microsystem pull-in voltage optimization. Paper presented at 10th World Congress on Structural and Multidisiplinary Optimization, Orlando, United States - Florida.

Virlez, G., Bruls, O., Poulet, N., Tromme, E., & Duysinx, P. (2013). Modelling of contact between stiff bodies in automotive transmission systems. In P. Fisette & J.-C. Samin (Eds.), Multibody Dynamics: Computational Methods and Applications (pp. 193-214). Netherlands: Springer. doi:10.1007/978-94-007-5404-1_9
Peer reviewed

Bruggi, M., & Duysinx, P. (01 September 2012). Topology optimization for minimum weight with compliance and stress constraints. Structural and Multidisciplinary Optimization, 46 (3), 269-384. doi:10.1007/s00158-012-0759-7
Peer Reviewed verified by ORBi

Virlez, G., Bruls, O., Tromme, E., & Duysinx, P. (2012). Modelling of joints with clearance and friction in multibody dynamic simulation of automotive differentials. In Proceedings of the 6th Asian Conference on Multibody Dynamics.

Tromme, E., Bruls, O., Van Miegroet, L., Virlez, G., & Duysinx, P. (2012). Investigations on a Level Set based approach for the optimization of flexible components in multibody systems with a fixed mesh grid. In Proceedings of The 6th Asian Conference on Multibody Dynamics: Shanghai (China), 26-30 aout 2012.

Virlez, G., Bruls, O., Tromme, E., & Duysinx, P. (10 July 2012). Analysis of Stresses in Vehicle Driveline Systems Using a Flexible Multibody Approach. Paper presented at 8th European Solid Mechanics Conference, Graz, Austria.

Gao, T., ZHANG, W., & Duysinx, P. (06 July 2012). A bi-value coding parameterization scheme for the discrete optimal orientation design of the composite laminate. International Journal for Numerical Methods in Engineering, 91 (1), 98-114. doi:10.1002/nme.4270
Peer Reviewed verified by ORBi

Louvigny, Y., & Duysinx, P. (2012). Advanced Engine Dynamics Using MBS and a Mixed Nonlinear FEM and Super Element Approach. In Eberhard & Ziegler (Eds.), Proceedings of the IMSD2012 - The 2nd Joint International Conference on Multibody System Dynamics.

Christen, F., Ewald, C., Eckstein, L., Abel, D., Katriniok, A., & Duysinx, P. (25 April 2012). Traffic Situation Assessment and Intervention Strategy of a Collision Avoidance System based on Galileo Satellite Positioning. Paper presented at SAE World Congress, Detroit, United States.

Christen, F., Ewald, C., Eckstein, L., Abel, D., Katriniok, A., & Duysinx, P. (2012). Traffic Situation Assessment and Intervention Strategy of a Collision Avoidance System based on Galileo Satellite Positioning. Eprint/Working paper retrieved from https://orbi.uliege.be/2268/120147. doi:10.4271/2012-01-0280

Tromme, E., Bruls, O., Van Miegroet, L., Virlez, G., & Duysinx, P. (29 February 2012). A level set approach for the optimal design of flexible components in multibody systems. Paper presented at Euromech Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Enschede, University of Twente, Netherlands.

Lemaire, E., Van Miegroet, L., Rochus, V., & Duysinx, P. (16 November 2011). Topology optimization of electrostatic micro-actuators including electromechanical stability constraint. Paper presented at Fifth International Conference on Advanced COmputational Methods in Engineering (ACOMEN), Liège, Belgium.

Tromme, E., Lemaire, E., & Duysinx, P. (14 November 2011). Topology optimization of compliant mechanisms: Application to vehicle suspensions. Paper presented at Fifth International Conference on Advanced COmputational Methods in Engineering (ACOMEN), Liège, Belgium.

Virlez, G., Cardona, A., Bruls, O., & Duysinx, P. (14 November 2011). Modelling of frictional unilateral contact in automotive differentials. Paper presented at ACOMEN - Fifth International Conference on Advanced Computational Methods in Engineering, Liège, Belgium.

Bruyneel, M., Duysinx, P., Fleury, C., & Gao, T. (October 2011). Extensions of the Shape Functions with Penalization Parameterization for Composite-Ply Optimization. AIAA Journal, 49 (10), 2325-2329. doi:10.2514/1.J051225
Peer Reviewed verified by ORBi

Duysinx, P., Gao, T., Zhang, W., Fleury, C., & Bruyneel, M. (2011). New developments for an efficient solution of the discrete material topology optimization of composite structures. In S. Faester, D. Juul Jensen, B. Ralph, ... B. F. Sorensen (Eds.), Composite materials for structural performance: towards the higher limits (pp. 255-262). Rioskilde, Denmark: Riso.
Peer reviewed

Virlez, G., Bruls, O., Poulet, N., & Duysinx, P. (2011). Simulation of differentials in four-wheel drive vehicles using multibody dynamics. In Proceedings of the ASME 2011 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011. doi:10.1115/DETC2011-48313
Peer reviewed

Louvigny, Y., & Duysinx, P. (2011). Advanced engine dynamics using mbs and super element approach: application to twin-cylinder boxer engines. In Procedings of Eccomas Multibody dynamics 2011 (pp. 9).

Virlez, G., Bruls, O., & Duysinx, P. (2011). Modeling of contact between stiff bodies in automotive transmission systems. In J.-C. Samin & P. Fisette (Eds.), Proceedings of MULTIBODY DYNAMICS 2011, ECCOMAS Thematic Conference.

Tromme, E., Bruls, O., & Duysinx, P. (2011). Optimization of flexible components in reciprocating engines with cyclic dynamic loading. In J.-C. Samin & P. Fisette (Eds.), Proceedings of Multibody Dynamics 2011, Eccomas Thematic Conference: Brussels (Belgium), 4-7 juillet 2011.

Bruls, O., Lemaire, E., Duysinx, P., & Eberhard, P. (2011). Optimization of multibody systems and their structural components. In W. Blajer, K. Arczewski, J. Fraczek, ... M. Wojtyra (Eds.), Multibody Dynamics: Computational Methods and Applications (pp. 49-68). Springer. doi:10.1007/978-90-481-9971-6_3

Rochus, V., Rixen, D., Van Miegroet, L., & Duysinx, P. (2011). Electrostatic Simulation using XFEM for Conductor and Dielectric Interfaces. International Journal for Numerical Methods in Engineering, 85 (10), 1207–1226. doi:10.1002/nme.2998
Peer Reviewed verified by ORBi

Gao, T., Zhang, W., & Duysinx, P. (2010). Comparison of volume constraint and mass constraint in structural topology optimization with multiple materials. In H. Rodrigues (Ed.), Book of abstracts and proceeding of the 2nd International Conference on Engineering Optimization.

Duysinx, P., Emonts-Alt, J., Virlez, G., Bruls, O., & Bruyneel, M. (2010). Advances in optimization of flexible components in mutlibody systems: Application to robot-arms design. In Proceedings of the 5th Asian Conference on Multibody Dynamics.

Louvigny, Y., & Duysinx, P. (27 May 2010). Advanced engine dynamics using MBS: Application to twin-cylinder boxer engines. Paper presented at IMSD 2010 (The 1st Joint International Conference on Multibody System Dynamics), Lappeenranta, Finland.

Virlez, G., Bruls, O., Poulet, N., & Duysinx, P. (2010). Multibody Dynamics Analysis of Differentials in Vehicle Drivetrains. In Proceedings of the First Joint International Conference on Multibody System Dynamics.

Duysinx, P., Emonds-Alt, J., Virlez, G., Bruls, O., & Bruyneel, M. (May 2010). Recent developments in optimization of flexible components of multibody systems. Paper presented at ECCM2010, IV European Conference on Computational Mechanics, Paris, France.

Lemaire, E., Van Miegroet, L., Schoonjans, T., Duysinx, P., & Rochus, V. (2010). Multiphysic topology optimization of electromechanical micro-actuators considering pull-in effect. In Proceedings of the IVth European Conference on Computational Mechanics (ECCM 2010).

Van Miegroet, L., Lemaire, E., & Duysinx, P. (2009). APPLICATION DE L’OPTIMISATION DE FORME ET DE TOPOLOGIE A LA CONCEPTION INNOVANTE D’EJECTEURS POUR UN CONCASSEUR MAG’IMPACT.

Duysinx, P., & Van Miegroet, L. (September 2009). Sensitivity in shape optimization of complex 3D geometries using level sets and non-conforming finite elements. Paper presented at XFEM 2009 The eXtended Finite Element Method – Recent developments and Applications, Aachen, Germany.

Lemaire, E., Van Miegroet, L., Duysinx, P., & Rochus, V. (2009). Influence of the material model on local pull-in in electromechanical microdevices topology optimization. In PLATO-N International Workshop - Extended Abstracts.

Louvigny, Y., Vanoverschelde, N., Janssen, G., Breuer, E., & Duysinx, P. (02 July 2009). Dynamic analysis and preliminary design of twin-cylinder engines for clean propulsion systems. Paper presented at Multibody Dynamics 2009, Warsaw, Poland.

Van Miegroet, L., & Duysinx, P. (2009). 3D Shape Optimization with X-FEM and a Level Set Constructive Geometry Approach. In Proceeding of the 8th World Congress on Structural and Multidisciplinary Optimization.

Bruggi, M., & Duysinx, P. (2009). On the use of a truly–mixed formulation in topology optimization with global stress–constraints. In Proceeding of the 8th World Congress on Structural and Multidisciplinary Optimization.

Nzisabira, J., Louvigny, Y., Christiaens, S., & Duysinx, P. (2009). Eco-efficiency methodology of Hybrid Electric Vehicle based on multidisciplinary multi-objective optimization. In Proceeding of the 8th World Congress on Structural and Multidisciplinary Optimization.

Qiu, K., Duysinx, P., Zhang, W.-H., Van Miegroet, L., & Lemaire, E. (2009). Microstructure design with generalized shape optimization based on level set geometrical description and XFEM. Paper presented at 8th. World Congress on Structural and Multidisciplinary Optimization (WCSMO8), Lisbon, Portugal.

Duysinx, P., Bruyneel, M., & Fleury, C. (2009). SOLUTION OF LARGE SCALE OPTIMIZATION PROBLEMS WITH SEQUENTIAL CONVEX PROGRAMMING. (Danish Center For Applied Mathematics and Mechanics, International Graduate Research School in Applied Mechanics: Advanced Optimization).

Louvigny, Y., Christiaens, S., & Duysinx, P. (10 March 2009). Preliminary design of twin-cylinder engines for hybrid electric vehicle applications. Paper presented at IAMF 2009 (International Advanced Mobility Forum), Genève, Switzerland.

Nzisabira, J., Louvigny, Y., & Duysinx, P. (2009). Comparison of Ultra Capacitors, Hydraulic Accumulators and Batteries Technologies to Optimize Hybrid Vehicle Ecoefficiency. In Proceeding of 2nd IEEE Int. Conference of Power Engineering, Energy, and Electric Drives. IEEE. doi:10.1109/POWERENG.2009.4915261
Peer reviewed

Bruls, O., Lemaire, E., Duysinx, P., & Eberhard, P. (2009). Topology Optimization of Structural Components: A Multibody Dynamics-Oriented Approach. In Proceedings of the Multibody Dynamics ECCOMAS Conference (pp. 1-13). K. Arczewski, J. Fraczek, M. Wojtyra.

Rochus, V., Golinval, J.-C., Van Miegroet, L., & Duysinx, P. (2009). Electrostatic Forces Computed with Extended Finite Element. Paper presented at International Conference on Extended Finite Element Methods – Recent Developments and Applications XFEM 2009, Aachen, Germany.

Lemaire, E., Duysinx, P., & Rochus, V. (2009). Multiphysic topology optimization of electromechanical microdevices considering pull-in voltage using an electrostatic force filter. In Proceeding of the 8th World Congress on Structural and Multidisciplinary Optimization.

Collard, J.-F., Duysinx, P., & Fisette, P. (2009). Kinematical Optimization of Closed-Loop Multibody Systems. In C. Botasso, Multibody Dynamics - Computational Methods and Applications. Springer Verlag.
Peer reviewed

Duysinx, P., Van Miegroet, L., Lemaire, E., Bruls, O., & Bruyneel, M. (December 2008). Topology and generalized shape optimisation: why stress constraints are so important? International Journal for Simulation and Multidisciplinary Design Optimization, 2 (4), 253-258.
Peer Reviewed verified by ORBi

Nzisabira, J., Louvigny, Y., & Duysinx, P. (2008). Comparison of Ultra capacitors and Batteries Technologies to Optimize Hybrid Electric Vehicle Efficiency. In Proceeding of 3rd European Symposium on Supercapacitors and Application (ESSCAP08).
Peer reviewed

Bruls, O., Lemaire, E., Eberhard, P., & Duysinx, P. (2008). Design of mechanism components using topology optimization and flexible multibody simulation. In Proceedings of the 8th World Congress on Computational Mechanics.

Lepage, S., Van Miegroet, L., & Duysinx, P. (July 2008). Stochastic Modal Analysis of Structures with Random Shape Using X-FEM. Paper presented at 8th. World Congress on Computational Mechanics (WCCM8), 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008).

Clément, F., Rochus, V., Lemaire, E., Fleury, C., & Duysinx, P. (2008). Shape optimization of electromechanical microsystems for prescribed "capacitance-voltage" curve. In Proceedings of the 8th World Congress on Computational Mechanics.

Louvigny, Y., Nzisabira, J., & Duysinx, P. (12 March 2008). Analysis of hybrid hydraulic vehicles and comparison with hybrid electric vehicles using batteries or super capacitors. Paper presented at EET-2008 European Ele-Drive Transportation Conference + IAMF International Advanced Mobility Forum, Geneva, Switzerland.

Nzisabira, J., Louvigny, Y., & Duysinx, P. (2008). Eco-efficiency optimization of Hybrid Electric Vehicle based on response surface method and genetic algorithm. In Proceedings of EET-2008 European Ele-Drive Conference and International Advanced Mobility Forum.

Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Electromechanical microdevice pull-in voltage maximization using topology optimization. Paper presented at 8th World Congress on Computational Mechanics, Venice, Italy.

Duysinx, P., Fleury, C., Van Miegroet, L., Lemaire, E., Bruls, O., & Bruyneel, M. (2008). Stress constrained topology and shape optimization : Specific character and large scale optimization algorithms. In Proceedings of the 8th World Congress on Computational Mechanics (WCCM).

Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Microbeam pull-in voltage topology optimization including material deposition constraint. Computer Methods in Applied Mechanics and Engineering, 197, 4040-4050. doi:10.1016/j.cma.2008.03.024
Peer Reviewed verified by ORBi

Rochus, V., Van Miegroet, L., Duysinx, P., Golinval, J.-C., & Rixen, D. (2008). Modelling the electromechanical coupling of RF switch using Extended Finite Element. Paper presented at EuroSimE Conference :Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, Freiburg im Breisgau, Germany. doi:10.1109/ESIME.2008.4525039

Louvigny, Y., Nzisabira, J., & Duysinx, P. (01 June 2007). Analysis of hydraulic hybrid vehciles and economical comparison with hybrid electric vehicles. Paper presented at EET2007 European Ele-Drive Transportation Conference, Bruxelles, Belgium.

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (May 2007). Topology optimization of microbeams including layer deposition manufacturing constraints. Paper presented at 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea.

Van Miegroet, L., Jacobs, T., & Duysinx, P. (2007). Recent developments in fixed mesh optimization with X-FEM and Level Set description. Paper presented at 7th World Congress of Structural and Multidisciplinary Optimization, Seoul, South Korea.

Bruls, O., Lemaire, E., Eberhard, P., & Duysinx, P. (2007). Topology Optimization of Structural Components Included in Flexible Multibody Systems. In Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization (pp. 1-10).

Bruls, O., Duysinx, P., & Golinval, J.-C. (2007). The global modal parameterization for non-linear model-order reduction in flexible multibody dynamics. International Journal for Numerical Methods in Engineering, 69 (5), 948-977. doi:10.1002/nme.1795
Peer Reviewed verified by ORBi

Van Miegroet, L., & Duysinx, P. (2007). Stress concentration minimization of 2D filets using X-FEM and level set description. Structural and Multidisciplinary Optimization, 33 (4-5), 425-438. doi:10.1007/s00158-006-0091-1
Peer Reviewed verified by ORBi

Duysinx, P., Bruls, O., & Géradin, M. (2006). An introduction to robotics - mechanical aspects. (ULiège - Université de Liège).

Duysinx, P., Van Miegroet, L., Remouchamps, A., & Fleury, C. (2006). Generalized Shape And Topology Optimization: Recent Developments And Application Perspectives To Automotive Structures. In New Advances in Body Engineering - Lightweight design, passive safety, pedestrian protection, and numerical optimization.

Duysinx, P., Van Miegroet, L., & Jacobs, T. (November 2006). Generalized shape optimization using XFEM and Level Set method. Paper presented at International Workshop on “Direct and Inverse Field Problems in Mechanics”, Linz, Austria.

Bruls, O., Duysinx, P., & Golinval, J.-C. (November 2006). Simulation and optimization of controlled multibody systems: Application to vehicle dynamics. Paper presented at ITCT 2006, Paris, France.

Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). An extended flexible multibody dynamics software for mechatronic applications. In Proceedings of ISMA 2006 (pp. 10).

Collard, J.-F., Duysinx, P., & Fisette, P. (2006). Optimal synthesis of planar mechanisms via an extensible-link approach. Paper presented at ISMA2006 International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Bruls, O., Duysinx, P., & Eberhard, P. (June 2006). On the implementation of a sensitivity analysis in a flexible multibody dynamics environment. Paper presented at Third European Conference on Computational Mechanics (ECCOMAS-ECCM), Lisbon, Portugal.

Cuevas, C., Duysinx, P., Hannay, J., Lebrun, J., Ngendakumana, P., & Teodorese, V. (2006). Réalisation et validation d’un banc du système de refroidissement pour pile à combustible de véhicule.

Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Improvement of Pull-in Voltage of Electromechanical Microbeams Using Topology Optimization. In 3rd European Conference on Computational Mechanics (ECCM).

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (2006). MAXIMIZATION OF PULL-IN VOLTAGE OF MICRO-ELECTROMECHANICAL STRUCTURES USING TOPOLOGY OPTIMIZATION. Paper presented at 7th World Congress on Computational Mechanics, Los Angeles, United States.

Duysinx, P., Van Miegroet, L., Jacobs, T., & Fleury, C. (2006). Generalized shape optimization using X-FEM and Level Set methods. In M.-P. Bendsoe, N. Olhoff, ... O. Sigmund, IUTAM Sumposium on Topological Design Optimization of Structures, Machines, and Materials. Status and Perspectives. Springer Verlag.

Van Miegroet, L., Jacobs, T., Duysinx, P., Lemaire, E., & Fleury, C. (2006). Generalized shape optimization with X-FEM and Level Set description applied to stress constrained structures. Paper presented at 7th World Congress on Computational Mechanics, Los Angeles, United States.

Van Miegroet, L., Jacobs, T., Lemaire, E., & Duysinx, P. (2006). Stress constrained optimization using X-FEM and Level-Set description. In Proceedings of III European Conference on Computational Mechanics. Solids, Structures and Coupled Problems in Engineering.

Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). A model reduction method for the control of rigid mechanisms. Multibody System Dynamics, 15 (3), 213-227. doi:10.1007/s11044-006-1354-8
Peer reviewed

Bruyneel, M., & Duysinx, P. (2006). Note on singular optima in laminates design problems. Structural and Multidisciplinary Optimization, 31 (2), 156-159. doi:10.1007/s00158-005-0569-2
Peer Reviewed verified by ORBi

Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Topology optimization of electromechanical microsystems against pull-in voltage. Paper presented at Eurosime 2006, Como, Italy. doi:10.1109/ESIME.2006.1644038

Duysinx, P., Van Miegroet, L., jacobs, T., & Fleury, C. (2005). Generalized shape optimization using XFEM and Level Set methods. In M.-P. Bendsoe, N. Olhoff, ... O. Sigmund, Proceedings of Topopt SYMP2005, IUTAM Symposium. Topological Design Optimization of Structures, Machines and Materials. Status and Perspectives.
Peer reviewed

Collard, J.-F., Fisette, P., & Duysinx, P. (2005). Optimal synthesis of mechanisms using time-varying dimensions and natural coordinates. In J. Herskowitz, Proceedings of the 6th World Congress of Structural and Multidisciplinary Optimization (WCSMO6).

Bruls, O., Duysinx, P., & Golinval, J.-C. (2005). A unified finite element framework for the dynamic analysis of controlled flexible mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Dynamics (pp. 16).

Duysinx, P., Bruls, O., collard, J.-F., Fisette, P., Lauwerys, C., & Swevers, J. (2005). Optimization of mechatronic systems: application to a modern car equipped with a semi-active suspension. In J. Herskowitz, Proceedings of the 6th World Congress of Structural and Multidisciplinary Optimization (WCSMO6).

Van Miegroet, L., Moës, N., Fleury, C., & Duysinx, P. (2005). Generalized Shape optimization based on the Level Set method. In J. Herskowitz, Proceedings of the 6th World Congress of Structural and Multidisciplinary Optimization (WCSMO6).

Collard, J.-F., Fisette, P., & Duysinx, P. (2005). Contribution to the optimization of closed-loop multibody systems: Application to parallel manipulators. Multibody System Dynamics, 13 (1), 69-84. doi:10.1007/s11044-005-4080-8
Peer reviewed

Bruyneel, M., & Duysinx, P. (2005). Note on topology optimization of continuum structures including self-weight. Structural and Multidisciplinary Optimization, 29 (4), 245-256. doi:10.1007/s00158-004-0484-y
Peer Reviewed verified by ORBi

Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). Generation of closed-form models for the control of flexible mechanisms: a numerical approach. In Proc. of the 7th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 1-10).

Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). A systematic model reduction method for the control of flexible multibody systems. In Proc. of the 21st Int. Congress of Theoretical and Applied Mechanics (ICTAM) (pp. 1-2).

Bruls, O., Duysinx, P., & Golinval, J.-C. (March 2004). Reliable simulation of mechatronic systems using Newmark algorithms. Paper presented at EUROMECH Colloquium on Advances in Simulation Techniques for Applied Dynamics (EUROMECH 452), Halle, Germany.

Géradin, M., & Duysinx, P. (2004). AN INTRODUCTION TO ROBOTICS: MECHANICAL ASPECTS. (ULiège - Université de Liège, MECA0089-1 Robotique: aspects mécaniques).

Jeunechamps, P.-P., Walmag, J., Duysinx, P., Delhez, E., Tossings, P., Habraken, A., & Ponthot, J.-P. (2004). A trust region algorithm for automatic identification of elasto-viscoplastic model parameters in metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 2004.
Peer reviewed

Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). A model reduction method for the control of rigid mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Systems.

Duysinx, P., Bruyneel, M., & Fleury, C. (2003). Solution of topology optimization problems with sequential convex programming. Paper presented at Lecture présentée aux cours de troisième cycle"Advanced Topics in strucural Optimizaion/ Topology Design-Theory and Practice, Lyngby, Denmark.

Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C. Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.
Peer reviewed

Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). Computational environment for the design of flexible mechanisms with feedback control. In Proceeding of 6th National Congress on theorical and Applied Mechanics.

Collard, J.-F., Fisette, P., & Duysinx, P. (2003). Contribution to the optimization of closed-loop multibody systems : application to parallel manipulators. In Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.

Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. In Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.
Peer reviewed

Rochus, V., Duysinx, P., & Golinval, J.-C. (2003). Modeling of the influence of electric forces on mechanical structures. Paper presented at Proceedings of the 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium.

Zhang, W., & Duysinx, P. (2003). Dual approach using a variant perimeter constraint and efficient sub-iteration scheme for topology optimization. Computers and Structures, 81 (22-23), 2173-2181. doi:10.1016/S0045-7949(03)00294-3
Peer Reviewed verified by ORBi

Bruyneel, M., Duysinx, P., & Fleury, C. (October 2002). A family of MMA approximations for structural optimization. Structural and Multidisciplinary Optimization, 24 (4), 263-276. doi:10.1007/s00158-002-0238-7
Peer Reviewed verified by ORBi

Bruls, O., Duysinx, P., & Golinval, J.-C. (2002). An Adaptation of the Newmark Scheme for the Integrated Simulation of Mechatronic Systems. In Proceeding of 6th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 484-489).

Bruls, O., De Boe, P., Duysinx, P., & Golinval, J.-C. (2002). Integrated simulation of mechanical structures and their control system. In Proc. of the 2nd Int. Conf. on Advanced Computational Methods in Engineering (ACOMEN) (pp. 1-10).

Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Finite Element Analysis of the Electro-Mechanical Coupling in MEMS. Paper presented at Proceedings of ACOMEN 2002, Liège, Belgium.

Bruyneel, M., & Duysinx, P. (2002). Selection of approximation schemes in topology optimization. In M. Hogge, Proceedinsg of the ACOMEN 2002, 2nd International Conference on Advanced Computational Methods in Engineering.

Duysinx, P., & Bruyneel, M. (2002). Recent Progress In Preliminary Design Of Mechanical Components With Topology Optimization. In P. Chedmail, G. Cognet, C. Fortin, C. Mascle, ... J. Pegna, Integrated Design and Manufacturing in Mechanical Engineering. Kluwer.

Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Modeling of Electro-mechanical coupling in MEMS. Paper presented at PAI, Bruxelles, Belgium.

Bruyneel, M., & Duysinx, P. (2001). Topology optimization with self-weight loading: (un-expected) problems and solutions. In M. P. Bendsoe, N. Olhoff, ... J. Rassmussen, Proceedings of the 2nd Max Planck Workshop on Engineering Design Optimization.

Bruyneel, M., Duysinx, P., & Fleury, C. (July 2001). A family of MMA approximations for structural optimization. Paper presented at Third ASMO-UK/ISSMO conference on Engineering Design Optimization, Harrogate, United Kingdom.

Bruyneel, M., Duysinx, P., & Fleury, C. (2001). Composite structures design for strength and stiffness with respect to ply thickness and/or fibers orientation. In G. D. CHENG, Proceedings of the 4th World Congress of Structural and Multidisciplinary Optimization WCSMO4.

Duysinx, P., Nguyen, V. H., Bruyneel, M., & Fleury, C. (2001). Estimating diagonal second order terms in structural approximations with quasi-Cauchy techniques. In G. D. CHENG, Proceedings of the 4th World Congress of Structural and Multidisciplinary Optimization WCSMO4.

Duysinx, P. (December 1999). L’Optimisation Topologique en Mécanique. AILg Bulletin, 6, p. 6-8.

Petersson, J., Beckers, M., & Duysinx, P. (1999). Almost Isotropic Perimeters in Topology Optimization: Theoretical and Numerical Aspects. In C. Bloebaum, Proceedings of the 3rd World Congress of Structural and Multidisciplinary Optimization WCSMO3.

Léonard, O., Rothilde, A., & Duysinx, P. (1999). Compressor and Turbine Blade Design by Optimization. In C. Bloebaum, Proceedings of the 3rd World Congress of Structural and Multidisciplinary Optimization WCSMO3.

Duysinx, P. (1999). Topology Optimization with Different Stress Limit in Tension and Compression. In C. Bloebaum, Proceedings of the 3rd World Congress of Structural and Multidisciplinary Optimization WCSMO3.

Bruyneel, M., Vermaut, O., Duysinx, P., & Fleury, C. (1998). Enhanced Approximation Schemes for Classical Optimization Algorithm. (TEC-T31-01). Brite-Euram COMPOPT Project.

Duysinx, P., & Bendsoe, M. P. (1998). Topology Optimization of Continuum Structures with Local Stress Constraints. International Journal for Numerical Methods in Engineering, 43, 1453-1478. doi:10.1002/(SICI)1097-0207(19981230)43:8<1453::AID-NME480>3.0.CO;2-2
Peer Reviewed verified by ORBi

Duysinx, P., & Sigmund, O. (1998). New Developments in Handling Stress Constraints in Optimal Material Distributions. In Proceedings of 7th AIAA/USAF/NASA/ISSMO symposium on Multidisciplinary Design Optimization (AIAA Paper 98-4906). AIAA.
Peer reviewed

Duysinx, P., & Bendsoe, M. P. (1997). Topology Optimization of Continuum Structures with Stress Constraints. In W. Gutkowski & Z. Mroz, Proceedings of the Second World Congress of Structural and Multidisciplinary Optimization (WCSMO2) (pp. 527-532).

Duysinx, P. (1997). Layout Optimization : A Mathematical Programming Approach. (540).

Duysinx, P. (1996). Convex Approximation Methods for Large Scale Structural Problems. In Proceedings of the 9th Nordic Seminar on Computational Mechanics (NSCM IX).

Duysinx, P. (August 1996). Layout Optimization : A Mathematical Programming Approach. Paper presented at IUTAM 19th International Congress of Theoretical and Applied Mechanics, Kyoto, Japan.

Duysinx, P. (1996). Introduction à l'optimisation topologique. (OF43). Liège, Belgium: LTAS.

Duysinx, P. (1996). OPTIMISATION TOPOLOGIQUE : DU MILIEU CONTINU A LA STRUCTURE ELASTIQUE. Unpublished doctoral thesis, ULiège - Université de Liège.
Jury: Fleury, C. (Promotor), Beckers, P., Litt, F.-X., Debongnie, J.-F., Géradin, M., Rondal, J., Nguyen, V. H., ... Bendsoe, M. P.

Zhang, W., Fleury, C., Duysinx, P., Nguyen, V. H., & Laschet, I. (1996). A Generalized Method of Moving Asymptotes (GMMA) Including Equality Constraints. Structural Optimization, 12 (2/3), 143-146. doi:10.1007/BF01196948
Peer reviewed

Duysinx, P., Zhang, W., Fleury, C., Nguyen, V. H., & Haubruge, S. (1995). A New Separable Approximation Scheme for Topological Problems and Optimization Problems Characterized by a Large Number of Design Variables. In N. Olhoff & G. I. N. Rozvany, Proceedings of the First World Congress of Structural and Multidisciplinary Optimization (WCSMO1) (pp. 1-8).

Duysinx, P., Zhang, W., Zhong, H. G., Beckers, P., & Fleury, C. (1994). Structural Shape Optimization with Error Control. In Proceedings of 20th ASME Design Automation Conference.
Peer reviewed

Duysinx, P., Zhang, W., & Fleury, C. (1993). Sensitivity Analysis With Unstructured Free Mesh Generators in 2-D Shape Optimization. In J. Herskowitz, Proceedings of Structural Optimization 93, The World Congress on Optimal Design of Structural Systems.

ZHANG, W. H., Beckers, P., Duysinx, P., & Fleury, C. (1993). A Parametric Design Based Approach to Structural Shape Optimization. Paper presented at 3rd International Conference OPTI93, Zaragoza, Spain.

Laschet, G., & Duysinx, P. (1992). Numercial tools for the design of adhesively bonded composite assemblies. In Actes des 8ièmes Journées Nationales sur les Matériaux Composites (JNC8) (pp. 389-400).

Morelle, P., Duysinx, P., & Fleury, C. (November 1992). CAD/FEM Coupling in Shape Optimization. Paper presented at FEM'92 IKOSS Congress, Baden-Baden, Germany.

Duysinx, P., & Fleury, C. (1992). Optimization software : View from Europe. In M. P. KAMAT, Structural Optimization Status and Promise (pp. 807-849). United States: AIAA.

Contact ORBi