Reliability assessment of aging miter gates in the presence of corrosion and fatigue; ; ;
Poster (2019, February 18)
Aging Hydraulic steel structures, especially lock gates suffer from structural deterioration with ...
Reliability assessment of aging miter gates in the presence of corrosion and fatiguePoster (2019, February 18)
Aging Hydraulic steel structures, especially lock gates suffer from structural deterioration with ...
POMDP-Based Risk Maintenance Planning for Offshore Wind SubstructuresPoster (2019, February 18)
This work presents a novel methodology to identify the optimal maintenance strategy for an offshore ...
Point-based POMDP Risk Based Inspection of Offshore Wind Substructuresin Caspeele, Robby; Taerwe, Luck; Frangopol, Dan M. (Eds.) Life Cycle Analysis and Assessment in Civil Engineering: Towards an Integrated Vision (2019)
This article presents a novel methodology to select the optimal maintenance strategy of an offshore ...
Using SCADA in updating failure probability of a monopile support structurein EAWE PhD Seminar 2018 Proceedings (2018, September 18)
Assessment of existing offshore wind turbine support structures is crucial for a condition-based ...
Updating the failure probability of miter gates based on observation of water levelsin Structural Integrity (2018, September 05)
Hydraulic steel structures, especially lock gates play a significant role in keeping navigation ...
Quick assessment of the punching resistance of an offshore wind turbine jacket impacted by a shipin Paik, Jeom Kee; Ehlers, Sören; Ringsberg, Jonas (Eds.) Proceedings of the 3rd International Conference on SHips and Offshore Structures ICSOS2018 (2018, September)
This paper presents a new methodology developed to compute the energy dissipated by plastic ...
Advances on the methodology for the Inland Waterways Classification for South Americain PIANC CONGRESS 2018 (2018, May)
There is, therefore, a need for a common classification for South America which would result in a ...
Proceedings of the 20th International Ship and Offshore Structures Congress Volume 1 (ISSC 2018)Book published by IOS Press - Volume 1 (2018)
Proceedings of the 20th International Ship and Offshore Structures Congress Volume 2 (ISSC 2018)Book published by IOS Press - Volume 2 (2018)
Analytical formulations to assess the energy dissipated at the base of an offshore wind turbine jacket impacted by a shipin Marine Structures (2018), 59
This paper presents some new analytical developments carried out to assess the energy dissipated ...
A discrete-event simulation approach to evaluate the effect of stochastic parameters on offshore wind farms assembly strategiesin Ocean Engineering (2018), 149
The wind industry is facing new challenges due to the planned construction of thousands of offshore ...
Ship collision analysis on Offshore Wind Turbines with monopile foundationsPoster (2017, December 04)
Every year the offshore wind industry is expanding and new offshore wind farms are built in deeper ...
Analytical method to assess the crashworthiness of a Floating Offshore Wind Turbine (FOWT)Poster (2017, December 04)
With the purpose of using more renewable energies and the decarbonisation of EU, some European ...
Innovative Framework for Risk-Based Maintenance Optimization of Offshore Wind SubstructuresPoster (2017, December 04)
Assessment of the deformation by punching and at the baseof an offshore wind turbine jacket impacted by a shipPoster (2017, December 04)
Renewable energy production systems are expanding very fast to meet the actual energetic issues ...
Design methods to assess the resistance of Offshore wind Turbine Structures impacted by a shipConference (2017, July 07)
The dynamic modes of jacket, monopile and Floating offshore wind turbines (FOWT) after a collision ...
Optimisation of Ship and Offshore Structures and Effective Waterway Infrastructures to Support the Global Economic Growth of a Country/Regionin Ship Science and Technology (2017), 11
This paper is the written support of Prof. Ph. Rigo for his keynote lecture at the 5th ...
Validation of a simplfied method for the crashworthiness of offshore wind turbine jackets using finite elements simulationsin Guedes Soares, Carlos; Garbatov, Yordan (Eds.) Progress in the Analysis and Design of Marine Structures (2017, May 08)
The work presented in this paper focuses on crashworthiness of jacket foundations used to support ...
Joint paper on inland waterways classification for South AmericaBook published by ECLAC (2017)
Ship collision analysis on Offshore Wind Turbine monopile foundationsin Marine Structures (2017), 51
An offshore wind farm covers a large maritime area and the site can be located close to traffic ...
Investigation of the added mass method for seismic design of lock gatesin Engineering Structures (2017)
Presentation of an algorithm to assess the crashworthiness of an offshore wind turbine jacket using analytical formulationsPoster (2016, December 05)
In a context of ecological issues, renewable energy systems are developed and enhanced and, amongst ...
Inland navigation and a more sustainable use of natural resources: networks, challenges and opportunities for South AmericaConference given outside the academic context (2016)
The workshop represents a joint effort between the World Association for Waterborne Transport ...
Effect of Cutout on the Ultimate Strength of a Wind Turbine Towerin International Conference on Ships and Offshore Structures ICSOS 2016 (2016, September)
Updating Failure Probability Of A Welded Joint In Offshore Wind Turbine Substructuresin The 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE) (2016, June)
For offshore wind turbines, the support structure contributes with a significant part to the ...
Ship collision on offshore wind turbinesin PIANC Yearbook 2015 (2016)
In a context of development of renewable energies, large offshore wind farms are being built close ...
Bi-objective Road and Pipe Network Design for Crude Oil Transport in the Sfax Region in Tunisiain Procedia Engineering (2016), 142
In this paper, we examine a bi-objective road and pipe network design for crude oil transport in ...
Une analyse dynamique des interactions entre acteurs portuaires et leurs effets sur l’efficience d’un port pétrolierin Recueil des articles des 34èmes Rencontres Universitaires de Génie Civil de l'AUGC (2016)
The port is a heterogeneous entity which includes a set of actors whose objectives are sometimes ...
Analytical developments to assess the crashworthiness of an offshore wind turbine jacket impacted by a shipPoster (2015, December 10)
As the number of offshore wind farms is constantly increasing, impacts between ships and wind ...
Organic Rankine cycles systems for waste heat recovery in marine applicationsScientific conference (2015, November 26)
In marine applications powered by internal combustion engines, a considerable amount of the energy ...
Improving the Installation of Offshore Wind Farms by the use of Discrete Event Simulationin Improving the Installation of Offshore Wind Farms by the use of Discrete Event Simulation (2015, November)
The offshore wind energy development is highly affected by the condition of the weather at sea ...
Presentation of a simplified method for the crashworthiness of offshore wind turbine jacketsConference (2015, October 13)
More and more offshore wind farms will be built in a near future and it is mandatory to perform for ...
Simplified analytical methods to analyze lock gates submitted to ship collisions and earthquakesin Mathematical Modelling in Civil Engineering (2015), 11
This paper presents two simplified analytical methods to analyze lock gates submitted to two ...
Review of existing solutions and presentation of a simplified method for the crashworthiness of lock gatesin Proceedings of the Smart Rivers 2015 Conference (2015, September)
Doctoral thesis abstract: Simplified analytical methods for the crashworthiness and the seismic design of lock gatesin Ship Technology Research (2015)
A simplified analytical method to estimate the resistance of plane lock gates impacted by river bargesin Marine Structures (2015), 43
A simplified analytical method to evaluate the seismic pressure on plane lock gatesin Engineering Structures (2015), 100
ULTIMATE STRENGTH - Discussion on Committee III.1- ISSC 2012's reportin Fricke, Wolfgang; Bronsart, Robert (Eds.) PROCEEDINGS OF THE 18TH INTERNATIONAL SHIP AND OFFSHORE STRUCTURES CONGRESS - VOLUME 3 (2015)
Concern for the ductile behavior of ships and o shore structures and their structural components ...
Numerical crashworthiness analysis of an offshore wind turbine monopile impacted by a shipin Shenoi, R Ajit; Soares, Carlos Guedes (Eds.) Analysis and Design of Marine Structures (2015, March)
The consequences of collision events can range from minor structural damages of the supporting ...
Ship collision on monopile offshore wind turbinesPoster (2015)
Every year, the offshore wind industry is expanding and the location of the future wind farms tends ...
A review of technical solutions and simulations approaches for ship collisions with lock gatesin Ship Technology Research (2015), 62
Development of Analytical method sto assess the ship impact on lock gates
PIANC Report 140 - Semi-probabilistic design concept for inland hydraulic structuresBook published by PIANC (2015)
Residual Ultimate Strength of Cracked Steel Unstiffened and Stiffened Plates under Longitudinal Compressionin Thin-Walled Structures (2014), 84
This paper numerically deals with the influence of cracks (in terms of length and location) on the ...
A SIMPLIFIED PROCEDURE TO ASSESS THE DYNAMIC PRESSURES ON LOCK GATESin Proceedings of the ICTWS 2014 7th International Conference on Thin-Walled Structures, Busan 28th September - 02 October 2014 (2014, September)
The paper is concerned with the seismic design of lock gates. During an earthquake, it is evident ...
SHIP COLLISION ON LOCK GATES – TECHNICAL SOLUTIONS AND SIMULATION APPROACHESin Proceedings of the ICTWS 2014 7th International Conference on Thin-Walled Structures, Busan 28th September - 02 October 2014 (2014, September)
A ship colliding with a lock gate can result in severe structural damage and disrupt the lock ...
SIMPLIFIED SEISMIC ANALYSIS OF LOCK GATESin PIANC 2014 Conference (2014, June 02)
The paper deals with the seismic design of lock gates. When such structures are submitted to an ...
On the ultimate compressive strength of transversely cracked platesin Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (2014, June)
This paper aims to numerically analyse the ultimate strength of transversely cracked steel plates ...
A review on simulation-based optimization methods applied to building performance analysisin Applied Energy (2014), 113
Recent progress in computer science and stringent requirements of the design of “greener” buildings ...
A bi-objective optimization model for a bimodal network of oil transportationConference (2014)
Transportation of oil requires attention for a variety of reasons, the most important being the ...
A Simplified procedure to assess the dynamic pressures on large reservoirsin Proceedings of the 9th International Conference on Structural Dynamics - EURODYN 2014 (2014)
PIANC Report n° 137 - 2014 NAVIGATION STRUCTURES: THEIR ROLE WITHIN FLOOD DEFENCE SYSTEMSBook published by PIANC (2014)
The effects of geometrical imperfections on the ultimate strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressurein Ships and Offshore Structures (2014)
The present study aims at determining the effects of the geometrical imperfections on the ultimate ...
Smart Rivers Conference 2013 - Abstract BookletBook published by PIANC - Edition 25th Nov 2013 (2013)
SMART RIVERS Booklet, including the abstracts of the various papers
Optimisation Methodology Applied to Ship Designin Practical Design of Ships and Other Floating Structures(PRADS), Korea, 20-25 October 2013 (2013, October)
Optimization with mathematical algorithms can be very helpful to find the best solution (minimum ...
A Rapid Procedure for Estimating the Ability of Lock Gates to Withstand Ship Collisionsin Proceedings of the PIANC Smart Rivers 2013 Conference (2013, October)
Jacks of all trades and masters of somein Naval Architect (2013)
Presentation of the EMSHIP - Erasmus Mundus Programme
Optimization of Shipyard Space Allocation and Scheduling using Heuristic Algorithmin Journal of Marine Science and Technology (2013), 18(3), 404-417
In this paper we describe the development of a tool that allows planners to efficiently and ...
RESILIENCE TO FLOODING – DRAFT BUILDING CODEin International Conference on Flood Resilience (ICFR) : Experiences in Asia and Europe (2013, September)
A significant issue associated Flood Defence Systems (FDS) is the difficulty of predicting how ...
ASimplified Analytical Method for Estimating the Crushing Resistance of an Inclined Ship Sidein Marine Structures (2013)
This paper provides a new contribution to the simplified analytical treatment of collisions between ...
A global optimization method for naval structure op- timizationConference (2013, July 01)
The paper proposes a global optimization method for the preliminary structural design of large ...
Study on alternative approaches to corrosion protection of ballast tanks using an economic modelin Marine Structures (2013), 32
One of the most relevant problems in ship construction and maintenance nowadays is corrosion in ...
A Simplified Procedure to Assess the Strength of a Ship Impacting a Lock Miter Gatein Proceedings of the ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering (2013, June 09)
Fast Strength Assessment of Mitre Gates to Ship Impactin International Journal of Crashworthiness (2013)
Fast Strength Assessment of Mitre Gates to Ship Impact
Ship Manoeuvring Behaviour in Crossing Current Near-by a Lockin VanTorre, Marc (Ed.) Third International Conference on Ship Manoeuvring in Shallow and Confined Water (2013, June 03)
Ship behaviour in current is one of the classical problems in ship manoeuvrability. However, it is ...
ASSESSMENT OF FATIGUE RELIABILITY FOR JACKET-TYPE OFFSHORE PLATFORMS CONSIDERING DYNAMIC BEHAVOIRin Proceedings of the ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering OMAE 2013 (2013, June)
In order to traditionally investigate the strength of marine structures, the structure is subjected ...
An Optimisation Methodology for Ship Structural Design using CAD/FEM Integrationin 12th International Conference on Computer and IT Applications in the Maritime Industries, COMPIT’13, Cortona 15-17 April 2013 (2013, April)
In ship structural design, scantling optimisation using mathematical algorithms is not yet largely ...
Reducing the cost of ballast tank corrosion: an economic modeling approachin Marine Structures (2013)
Reducing the Cost of Ballast Tank Corrosion through Innovative Ship Design: an Economic Modeling ...
A new super-element for estimating the collision resistance of an inclined ship sidein Advancements in Marine Structures : Proceedings of MARSTRUCT 2013, the 4th International Conference on Marine Structures, Espoo, Finland, 25th – 27th March 2013 (2013)
Hydrodynamique et Architecture Navalein Journées scientifiques et techniques du CETMEF 2012 (2012, December 05)
State of art en matière d'hydrodynamique navale et architecture navale pour la navaigatio nfluviale
The effects of hull modification on design parameters of medium speed monohuhll passenger ferriesin ICSOT : Developments in ship design & construction (2012, November 01)
Developments in ship design & construction
A Simplified Assessment of Ship Impact on Navigation Lock Gatesin Proceedings of the fourth International Conference on Estuaries and Coasts (2012, October 26)
EOL-OS, Software dedicated to the optimisation of the support structure of offshore wind turbinesin Ovid Farhi (Ed.) Third International Scientific Congress (2012, October 04)
Steel is currently the most common material used in the construction of offshore wind turbines ...
DESIGN METHODS Report of Technical Committee IV.2 of ISSCin 18th INTERNATIONAL SHIP AND OFFSHORE STRUCTURES CONGRESS (ISSC) (2012)
Concern for the synthesis of the overall design process for marine structures, and its integration ...
Extension of the Super-Elements Method to the Analysis of Oblique Collision Between Two Shipsin Marine Structures (2012)
Extension of the Super-Elements Method to the Analysis of Oblique Collision Between Two Ships
ULTIMATE STRENGTH ANALYSIS OF STEEL PLATES USING ISO/DIS 1872-2 AND ULSAPin Nguyen Thien Tong (Ed.) International Conference on Advances in Computational Mechanics (2012, August)
Ultimate limit states (or ultimate strength) have been assessed that is the much better basis than ...
PIANC - An opportunity for Intenational contacts and Experience Exchangesin Hydrailischer Entwurf und Betrieb von Bauwerken (2012, July 04)
The paper introduces PIANC activities and explain how PIANC is an opportunity for international ...
Ship Structure Optimization Using CAD/FEM Integrationin 11th INTERNATIONAL MARINE DESIGN CONFERENCE (2012, June 11)
In ship structural design, scantling optimization using mathematical algorithms is not yet largely ...
Application of artificial neural networks to the evaluation of the ultimate strength of uniaxially compressed welded stiffened aluminium platesin Proceedings of the Institution of Mechanical Engineers. Part M, Journal of Engineering for the Maritime Environment (2012)
A series of elastoplastic large-deflection finite element analyses is performed on stiffened ...
Towards a Short Time "Feature-Based Costing" for Ship Designin Journal of Marine Science and Technology (2012), 17(2), 216-230
Cost is perhaps the most influential factor in the outcome of a product or service within many of ...
Toward a Risk Based Simulation for the Erection of an Offshore Windmill Parkin Proceeding of the 11th International Conference on Computer Applications and Information Technology in the Maritime Industries (2012, April)
Nowadays, EU shipyards that are facing difficulties due to the global crisis are often trying to ...
Task 4.0 – Subsystem Optimization of the Structure ScantlingReport (2012)
In the present report concerning Task 4.0 – Subsystem Optimization of the Structure Scantling, the ...
IMPROVE SHIP DESIGN COMPLEXITY (EASYSHIP)Report (2012)
Nowadays productibility has become a major design attribute for shipbuilding industry. If a ship ...
A real-time assessment of the ship design complexityin Computer-Aided Design (2012), 44
The paper introduces an innovative complexity metric for passenger ships taking into account the ...
HARELBKE LOCK (Design & Build Procedure)Report (2012)
Three proposals have been received by the Waterwegen en Zeekanaal NV . This report reviews these ...
Simplified analytical method for estimating the resistance of lock gates to ship impactsin Journal of Applied Mathematics (2012)
Identification du potentiel territorial permettant le développement de nouveaux projets le long du réseau wallon des voies navigablesReport (2011)
Cette expertise porte sur une mission d'étude visant à établir un cadastre du potentiel territorial ...
Discrete Event Production Simulation in Shipyard Workshopsin Proceeding of the 21th COPINAVAL (2011, September)
Nowadays, shipyards are making huge effort to efficiently manage equipments and resources such as ...
Numerical and Experimental Studies of Simple Geometries in Slammingin International Journal of Offshore and Polar engineering (2011, September)
Optimization of Hull Structures for a 60 meters Mega Yachtin Proceeding of the 11th International Conference on Fast Sea Transportation (2011, September)
As well known already in earliest phases of a ship project many aspects and choices depend on the ...
Advisory Board - new Lock in IJmuiden.Report (2011)
‘The Advisory Board is to help the Directorate-General for Public Works and Water Management (RWS ...
WORKSHOP - PIANC 2011 - What's new in the design of navigation locks?Book - Prof. Ph. RIGO, INCOM WG29 Chairman (2011)
Preliminary study of medium-speed monohull passenger ferriesin TURAN, OSMAN (Ed.) International Conference on Technologies, Operations, Logistics and Modelling for Low Carbon Shipping LCS 2011 (2011, June 23)
The recent development of medium-speed monohull passenger ferries has shown their importance for ...
Discrete Event Production Simulation and Optimisation of Ship Block Erection Processin Proceeding of the 10th International Conference on Computer Applications and Information Technology in the Maritime Industries (2011, May)
Nowadays, shipyards are making every effort to efficiently manage equipments and resources such as ...
Projet HLC-AIMS- Rapport technique annuel n°1Report (2011)
Le potentiel de l’éolien offshore est énorme en comparaison à l’éolien terrestre où le manque de ...
Optimisation of ship structuresin Guedes Soares, Carlos; Garbatov, Y.; Fonseca, N.; Teixeira, A.P. (Eds.) Marine Technology and Engineering (2011, May)
Limiting CO2 emissions is a great challenge being faced by society today. Society, through the ...
Ship Complexity Assessment at Concept Design Stagein Journal of Marine Science and Technology (2011), 16
A innovative complexity metric has been introduced in this paper and provides a solution to compare ...
Scantling Optimization of Ship Structures Considering Fatigue at the Early Design Stagein Advances in Marine Structures - Proceedings of the 3rd International Conference on Marine Structures, MARSTRUCT 2011 (2011, March)
ABSTRACT: Fatigue aspects are leading criterion for the scantling optimization of ships structures ...
Early Structural Assessment and Optimisation of Passenger Shipsin Procceding of the International Conference on Design and Operation of Passenger Ships (2011, February 23)
A multi-criteria optimisation of a passenger ship is conducted in this paper. Minimum production ...
Design of Muong Chuoi, Kinh-Lo and Thu-Bo Barriers (report Jan 2011)Report (2011)
Consulting activities for the water level control for flood protection of HCMC area Design of Muong ...
Optimization study of the Scheldt ock gate on the cross section C with LBR-5 softwareReport (2011)
Report of the optimisation (least weight) performed on the lock gates (Port of Antwerp)
Objective Function & Selection of Constraints (WP2 and WP3)Report (2011)
The aim of this report is to present, define and explain the objective function used in the ...
Optimization of monopile offshore wind structuresin Marstruct (2011)
ABSTRACT: As industrialization is essential for large-scale offshore wind deployment, a ...
Analysis of ship impact on lock gates - Seine-Escaut Est waterwayin Mathematical Modelling in Civil Engineering (2010), 6(4), 43-55
This paper presents a ship impact analysis on lock gates. The case study is the downstream lock ...
Rapport 2010- Windsteel : développement de solutions en acier pour la construction éolienneReport (2010)
Un logiciel appelé EOL-OS a été développé dans le cadre des WP4 et 5 du projet « Windsteel ...
Design of Innovative Ship Concepts Using an Integrated Decision Support System for Ship Production and Operationin Brodogradnja: Journal of Naval Architecture and Shipbuilding Industry (2010), 61(4), 367-381
Design of Innovative Ship Concepts Using an Integrated Decision Support System for Ship Production ...
Space and time allocation in a shipyard assembly hallin Annals of Operations Research (2010), 179(1), 57-76
We present a space and time allocation problem that arises in assembly halls producing large ...
Multi-criteria Scantling Optimisation of Cruise Shipsin Ship Technology Research (2010), 20
A numerical tool for the optimisation of the scantlings of a ship is extended by considering ...
A complexity metric for practical ship designin Proceeding of PRADS 2010 (2010, September)
The paper introduces an innovative complexity metric for practical ship design taking into account ...
Advance Methods for Early Structural Assessment (WP7 - BESST Projet - FP7)Report (2010)
Optimisation software was chosen and the optimisation workflow was created. The capabilities of the ...
Scantling Multi-objective Optimisation of a LNG Carrierin Marine Structures (2010), 23(3), 288-302
Numerous real-world problems relating to ship design are characterized by many alternatives ...
Least Weight and Least Cost Optimisation of a Passenger Vesselin Mathematical Modelling in Civil Engineering (2010), (2), 17-26
In the scantling design of a passenger ship, minimum production cost, minimum weight and maximum ...
Innovative Concepts in Navigation Lock Designin The Port Infrastructure Seminar , 2010, TUDelft, NL (2010, June)
This paper presents the new report n°106 of PIANC InCom WG29 on Innovations in Navigation Lock ...
Design of River Navigation weirs and Flood Protection Barriersin 78th ICOLD Annual Meeting - Hanoi 2010 (2010, May 23)
The aim of the WG (Working Group) was to conduct a comprehensive review (state-of-the-art) of the ...
Panama Lock Gate optimisation – using LBR5 softwareReport (2010)
Research report to reduce the weight of the Panama lock gates - using LBR5 optimisation
Pre-study of the hydraulic works for the Seine-Scheldt-East Projectin 32nd PIANC Congress – Liverpool UK – 10-14 May 2010 (2010, May)
Innovations in Navigation Lock Designin 32nd PIANC Congress – Liverpool UK – 10-14 May 2010 (2010, May)
Multi-criterion Scantling Optimisation of Passenger Shipsin 9th International Conference on Computer Applications and Information Technology in the Maritime Industries (2010, April 12)
In the scantling design of a passenger ship, minimum production cost, minimum weight and maximum ...
Flood protection barriers in HCMC - part III Aprill 2010Report (2010)
HCMC - Protection de la ville de Saigon (Ho-Chin-Min) contre les inondations – aménagement de ...
Empirical Formulations for Estimation of Ultimate Strength of Continuous Stiffened Aluminium Plates under Combined in-plane Compression and Lateral Pressurein Thin-Walled Structures (2010), 48
Assistance technique à GRUPO – Porte d’écluse du Panama (Part 1: Design requirements)Report (2010)
Report of first mission to identify and assess the requirements for the design of the gate
Post-buckling behaviour and strength of multi-stiffened aluminium panels under combined axial compression and lateral pressurein Marine Structures (2010), 23
Innovations in Navigation Lock Designin IWASA - 40th Intern Symp on Hydraulic Engineering (2010, January)
LOCK - Inovations
Flood protection barriers in HCMC - part II Dec 2009Report (2009)
HCMC - Protection de la ville de Saigon (Ho-Chin-Min) contre les inondations – aménagement de ...
Logiciel Eol - Optimisation des mats d’éoliennes terrestres – (Etudes complémentaires)Report (2009)
Rapport technique relatifs a des etudes complementaires sur l'optimisation des mats d'éoliennes
Coupling Optiview and Production Simulationin Proceeding of the 16th International Conference of Ship and Shipping Research (2009, November)
This paper presents new developments to link OptiView and a Discrete Event production Simulation ...
Introduction to the PIANC Report 106 on Locks - Innovations In Navigation Lock Design.in PIANC WORKSHOP on Locks - Innovations In Navigation Lock Design, Brussels, Oct 2009 (2009, October)
First paper of the workshop - General presentation of the PIANC report N° 106 on Locks
WORKSHOP - PIANC Report n°106 on Locks - Innovations In Navigation Lock DesignBook published by PIANC (2009)
Proceeding of the PIANC WORKSHOP, on Innovations in Navigation LOck Design
Lock gates - Part B: Ship impactin PIANC International Workshop, 15-16 October 2009, Edt. Ph Rigo, PIANC, Brussels (2009, October)
This paper presents an overview of the state of art of ship impact analysis on lock gates. First ...
Lock Gates - Innovative conceptsin PIANC Workshop 'INNOVATIONS IN NAVIGATION LOCK DESIGN' (2009, October)
This paper introduces some new innovative concepts identifies by the INCOM WG29 and reported in the ...
IMPROVE - Design of Innovative Ship Concepts using an Integrated Decision Support System for Ship Production and Operationin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia, Editor V. Zanic – Univ. of Zagreb (2009, September 17)
Proceeding of IMPROVE EU Project (FP6 n°031382) WorkshopBook published by University of Zagreb - V Zanic - Coord. Ph Rigo; Editor V. Zanic; Publ. Univ. of Zagreb (2009)
A Fuzzy Metric for Assessing the Producibility of Straightening in Early Designin The 14th International Conference on Computer Applications in Shipbuilding (ICCAS) (2009, September 01)
Since several years, the large shipyards use more and more thin plates to build up stiffened panels ...
LNG carrier- Structural design aspectsin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia, Editor V. Zanic – Univ. of Zagreb, pp90-95 (Vol I) (2009, September)
Local and global ship vibrationsin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia, Editor V. Zanic – Univ. of Zagreb, pp41-45 (Vol I) + Powerpoint (Vol II) (2009, September)
LNG carrier – new innovative productin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia, Editor V. Zanic – Univ. of Zagreb (2009, September)
Flood protection barriers in HCMC - part I Sept 2009Report (2009)
HCMC - Protection de la ville de Saigon (Ho-Chin-Min) contre les inondations – aménagement de ...
Tools for early design stage: presentation of LBR-5 Softwarein Zanic, Vedran; Andric, Jerolim (Eds.) Proceedings of IMPROVE Final Workshop (2009, September)
LBR-5 is a tool for early design stage. Taking into account numerous kinds of constraints – ...
RoPaX- Structural design aspectsin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia, Editor V. Zanic – Univ. of Zagreb, pp107-114 (Vol I) + Powerpoint (Vol II) (2009, September)
New and Updated Modules to Performed Stress and Strength Analysisin IMPROVE Workshop (EU Project FP6 n°031382), DUBROVNIK 17-18 Sept. 2009, Croatia (2009, September)
Report about IMPROVE FP6 EU project
Innovations in Navigation Lock DesignBook published by PIANC - Report 106 - 2009 (2009)
State of art in navigation locks , focuss on innovations
Local search heuristics for large-scale discrete structural optimization with expensive black-box evaluationsReport (2009)
This paper considers large-scale structural optimization problems featuring discrete variables, as ...
Vibration Assessment of Ship Structuresin ISOPE 2009, The 19th Intern. Offshore and Polar Engg. Conf., Osaka, Japan, 21-26 June 2009 (2009, June)
Space Allocation Optimization Applied to Lower Hulls’ Production of Semi-Submersible Platformsin COMPIT'09 (2009, May 10)
This paper presents a part of new developments included inside a holistic optimisation strategy ...
Multi-Criteria Decision Support for Cost Assessment Techniques in Shipbuilding Industryin COMPIT'09, Budapest (2009, May 10)
Cost is perhaps the most influential factor in the outcome of a product or service within many of ...
Numerical and Experimental Investigations of Simple 2-D Geometries in Slammingin IMDC’2009, 10th Inter Marine Design Conference, 26-29 May 2009, Trondheim, Norway (2009, May)
A Data Mining Analysis to evaluate the additional workloads caused by welding distortionsin MARSTRUCT'09 (2009, March)
This paper presents a way to minimize cost in shipbuilding industry by using the results of a data ...
- Projet Seine Nord Europe –SNE- Membre de la commission scientifique « Ouvrages Hydrauliques »,Report (2009)
Expertise pour VNF (comission technique "ouvrages")
Maintenance/repair and production-oriented life cycle cost/earning model for ship structural optimization during conceptual design stagein Ships and Offshore Structures (2009), 4(2), 107-125
The aim of this paper is to investigate the effect of the change in structural weight due to ...
Vibration Assessment of the Beam Structures and Stiffened Panelsin The 33rd Inter Conf on Automotive Engg., Off Road Vehicules ORV 2008, Buchatest, Romania, 25-26 Sept 2008 (2008, September)
Finite Element Simulations of Simple 2-D Geometries in Slammingin Int. Conf. OMAE-2008, ASME, Estoril, Portugal, June 2008, Paper 57482 (2008, June)
IMPROVE - Design of Improved and Competitive Productsin DBlaS'2008, I&CT Intern. Conf., Istanbul, Turkey, 16-18 June 2008 (2008, June)
Optimization or Rolling and Floating Lock Gatesin PIANC'08 (2008, June)
This paper presents a methodology to minimize the weight of the gate by optimizing simultaneously ...
OptiView − A Powerful and Flexible Decision Tool Optimising Space Allocation in Shipyard Workshopsin Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT) (2008, May)
This paper presents new developments to maximize the number of ship blocks and ship sections ...
Multi-Criteria Selection of Hydraulic Gatesin International Navigation Seminar, PIANC AGA2008, Beijing, China Communication Press (CIP), Beijing, China, May 2008 (2008, May)
Innovations in Navigation Lock Designin International Navigation Seminar, PIANC AGA2008, Beijing, China Communication Press (CIP), Beijing, China (2008, May)
Estimation of Welding Distortions and Straightening Workload Through a Data Mining Analysisin Design, Fabrication and Economy of Welded Structures (DFE) (2008, April)
This paper will present a way to minimize cost in shipbuilding industry by using the results of a ...
Structural Optimization of a 220 000 m³ LNG Carrierin Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT) (2008, April)
This paper relates to the development of a new concept of 220.000 m³ LNG designed by AKERYARDS ...
Seine Nord Europe Canal - Comparaison of two lock concepts with water-saving basins and opimisation of chamber structurein Bulletin de l'Association Internationale Permanente des Congrès de Navigation (2008)
Seine Nord Europe Canal – Hydraulic Design of Locksin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (2008)
IMPROVE - Design of Improved and Competitive Products using an Integrated Decision Support System for Ship Production and Operationin COMPIT’2008, Edit. Rigo-Bertram, Univ. of Liege, Belgium, ISBN-10 2-9600785-0-0 (2008)
Conception de barrages mobiles et barrières anti-tempêtesBook published by AIPCN - Rapport 101-2008 (2008)
State of art dans le domaine du contôle des eaux dans les voies navigables (barrages mobiles et ...
Inland Waterway Traffic Simulatorin COMPIT’2008, Edit. Rigo-Bertram, Univ. of Liege, Belgium (2008)
A Data Mining Analysis Applied to a Straightening Process Databasein Ship Technology Research (2007), 54(4), 177-183
A Data Mining Analysis Applied to a Straightening Process Databasein Ship Technology Research (2007), 54(4), 177-183
The complexity of modern manufacturing processes in a highly competitive environment forces the ...
Multicriterion Scantling Optimization of the Midship Section of a Passenger Vessel considering IACS Requirementsin The 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS) (2007, October)
In the scantling design of a passenger ship, minimum production cost, minimum weight and maximum ...
Least Cost Optimization of Large Passenger Vesselsin Ships and Offshore Structures (2007), 2
The LBR-5 software allows optimizing ship structures according to objectives of higher inertia ...
A mixed-integer heuristic for the structural optimization of a cruise shipin COMPIT 2007 , Cortona, Italy (2007, April 23)
A heuristic approach is proposed to solve the structural optimization problem of a cruise ship. The ...
A Data Mining Analysis Applied to a Straightening Process Databasein Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT) (2007, April)
The paper presents the results of a data mining analysis aiming to improve the cost knowledge of ...
Integration of a Bottom-Up Production Cost Model in LBR-5 Optimization Toolin Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT) (2007, April)
The LBR-5 software allows the optimization of ship structures following different objectives as the ...
Least cost optimization of a large passenger vesselin International Conference on “Advancements in Marine Structures”, (Proceedings of MARSTRUCT’2007), Edt Guedes Soares & Das, Publ: Taylor & Francis Group, UK, 12-14 March 2007 (2007, March)
Minimization of Production Cost by use of an Automatic Cost Assessment Method and Simulationin The Euro-Asia Maritime Network (EAMARNET) (2007, January)
This paper will present different ways to minimize cost in shipbuilding industry. Amongst them we ...
Assessment of Ultimate Bending Moment of Ships from a Reliability Point of View, Using Independent Perturbations Methodin Network for Integrating Structural Safety, Risk and Reliability (ASRANet) (2006, July)
This paper presents a method to asses hull girder ultimate bending moment distribution, taking into ...
Ultimate Strength of Stiffened Panels Assessment Taking Into Account Model Uncertaintyin Proceedings of OMAE2006 (2006, June 04)
This paper presents a methodology to take into account model uncertainties related to the load-end ...
SIMULATION AND OPTIMIZATION OF A SHIPBUILING WORKSHOPin ICCC Bexi Conference (2006, June)
This study concerns the simulation of a shipbuilding workshop, and its optimization to improve its ...
Optimization of a Rolling and Floating Lock Gate for the Port of Antwerpin ICCC-ASCE: 2006, Int'l Conf. on Computing in Civil Engineering of ASCE, Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, June 2006, Paper IC-23, pp155-163 (2006, June)
An Analytical Cost Assessment Module for the Detailed Design Stagein Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT) (2006, May)
The main goal of the project is to implement a “real time” and automatic cost assessment model of ...
Scantling Optimization of Double-Hull Structures to Minimize their Production Costin IMDC 2006, Ann Arbor, Michigan, USA, May 2006 (2006, May)
Design of Movable Weirs and Storm Surge Barriersin PIANC 2006, 31ème Congrès de l’PIANC (Article 031) (2006, May)
Batardeaux de maintenance pour barrages mobiles: avantages et inconvénientsin PIANC 2006, 31ème Congrès de l’PIANC, Estoril, Portugal, May 2006, (Article 083), (2006, May)
Esquivanne: Un Outil de Conception des Barrages Mobiles de Navigationin PIANC 2006, 31ème Congrès de l’PIANC (Article 076) (2006, May)
Design of movables Weirs and Storm Surge BarriersBook published by PIANC - INCOM (2006)
State of of in the dsign of movable weirs and storm surge barriers
Modélisation, Simulation et Optimisation d'un Atelier de Construction Navalein 6ème Conférence Francophone de MOdélisation et SIMulation - MOSIM, Maroc (2006)
This study is about the simulation of a shipbuilding workshop, and its optimization in order to ...
Ultimate limit state design technology for aluminum multi-hull ship structuresin Transactions - Society of Naval Architects and Marine Engineers (2006), 113
The present paper is a summary of recent research and developments related to some core ultimate ...
Catalogue des batardeaux. Etude bibliographique et recensement des batardeaux de mainteance et de secoursin Catalogue des batardeaux. Etude bibliographique et recensement des batardeaux de mainteance et de secours (2006)
Catalogue des bataerdeaux, ouvrages de fermeture des passes navigables de barrages mobiles (et ...
Optimization of Surface Utilization Using Heuristic Approachesin Ship Technology Research (2005), 52(3), 141-147
We present a scheduling problem that arises in factories producing large building blocks. This is a ...
Least Construction Cost of FSO Offshore Structures and LNG Gas Carriersin ISOPE, The fifteenth International Offshore and Polar Engineering Conference, Seoul (2005, June 19)
In this paper, scantling optimization a FSO offshore structure and a medium size capacity LNG gas ...
Le QUEEN MARY 2, le plus grand paquebot au mondein Journal des Ingénieurs (2005), n°95
Le Queen Mary 2 est un paquebot qui détient de nombreux records. C’est le plus grand, le plus haut ...
Modelling, Simulation and Optimization of a Shipbuilding Workshopin COMPIT'2005 -Conference on Computer Applications and Information Technology in the Maritime Industries, Hamburg (2005, May)
Rechnergestützte Baukostenschätzung im Schiffsentwurfin Ship und Hafen (2005), 5
Various approaches for better initial cost estimates for ships are reviewed, compiling recent ...
Optimization of Surface Allocation using Heuristic Approachesin COMPIT 2005 , Hambourg, Germany (2005, May)
In this paper, we present a scheduling problem that arises in factories producing large building ...
Differential Equations of Stiffened Panels of Ship Structures & Fourier Series Expansionsin Ship Technology Research (2005)
Discussion on the Report of Committee IV.2 – ISSC’2003 "Design Methods"in 15th Int. Ship and Offshore Structures Congress (2005)
Reply to the discussion on the Report of Committee III.1 – ISSC’2003 "Ultimate Strength"in 15th Int. Ship and Offshore Structures Congress (2005)
Differential Equations of Stiffened Panels and Fourier Series Expansionin The Annals of “Dunarea De Jos” University of Galati (2005) (2005)
Discussion on Paper D04 “Ultimate limit state design technology for aluminium multi-hull ship structures, SNAME Transactions, Vol.113, (2005)”in Ultimate limit state design technology for aluminium multi-hull ship structures, SNAME Transactions, Vol.113 (2005)
Effect of Welding on Ultimate Compressive Strength of Aluminium Stiffened Panelsin HIPER’2004, High Performances Marine Vehicules (2004, September)
Ultimate strength of aluminium stiffened panels: Sensitivity analysisin PRADS’2004, 9th Int. Symposium on Practical Design of Ships and other Floating Structures, Germany, Seehafen Verslag GmbH, Hambourg, vol.1, Sept. 2004 (2004, September)
Ultimate Strength - Report of ISSC Technical Committee III.1, 2000-2003in 15th Int. Ship and Offshore Structures Congress, USA, August 2003 (2003)
AVPRO-LBR5, an Initial Design Software Suite with Scantling Optimization Capabilitiesin IMDC’2003, Eighth International Marine Design Conference, Grèce, Edited by A. Papanikolaou (NTUA, Athènes), Vol2, May 2003 (2003, May)
How to minimise production costs at the preliminary design stage - scantling optimizationin IMDC’2003, Eighth International Marine Design Conference, Grèce,Vol2 (2003, May)
Least Cost Optimisation of a Medium Capacity Gas Carrierin COMPIT’03, 2nd Int. EuroConference on Computer and IT Applications in the Maritime Industries,Hamburg, Ed. V. Bertram, 14-17 May 2003 (2003, May)
MARPOL Project, MadagascarReport (2003)
Recommendations pour l'application des directives MARPOL à MAdagascar. Mission d'identification.
An Integrated Software for Scantling Optimization and Least Production Costin Ship Technology Research (2003)
Analysis and Design of Ship Structure (Chap 18)in Ship Design and Construction (Vol 1) (2003)
The SNAME book is a ref book in ship Design and Construction. Chap 18, wriiten by P Rigo and his ...
Sensitivity analysis on ultimate strength of aluminium stiffened panelsin Marine Structures (2003)
Structural Optimization of the Blanc Pain Flood Control Gatein Bulletin scientifique de l'UTCB (2003)
Estimation de la résistance ultime de poutre-navire: Analyse comparative de méthodes sur frégatesin ATMA 2002, Association Technique Maritime et Aéronautique, 100ème Session (Article 2- Séance 1), www.atma.asso.fr, 19p. (2002, October)
Comparison of Rational-Based and Rule-Based Optimum Design of Ship Structuresin Annual Meeting of SNAME, Paper 19 (2002, September)
La conception des navires rapides à passagers: un défi technologique du début du 21ème siècle.in 30th PIANC International Congress (2002, September)
Sensitivity Analysis on Ultimate Hull Bending Moment and Multi-Criteria Comparative Analysis of Existing Methodin Conf ASRANet, Integrating Structural Reliability Analysis with Advanced Structural Analysis, Session 8 (2002, July)
L’optimisation des structures navales: minimisation du coût de construction de la coque métalliquein Institut pour la Promotion des Sciences de l’Ingénieur (IPSI) (2002)
Comparison of Rational-Based and Rule-Based Optimum Design of Ship Structuresin SNAME Transactions (2002)
A Framework for Simulation Based Design of Ship Structuresin Journal of Ship Production (2002)
Scantling Optimization Based on Convex Linearizations and a Dual Approachin Marine Structures (2001)
A Module-Oriented Optimization Toolin PRADS’2001, 8th Int. Symposium on Practical Design of Ships and other Floating Structures,vol 1 (2001, September)
Ultimate Strength of Longitudinally Stiffened Panels: Multi-Criteria Comparative Analysisin PRADS’2001, 8th Int. Symposium on Practical Design of Ships and other Floating Structures, vol.2 (2001, September)
Sensitivity Analysis on Ultimate Hull Bending Momentin PRADS’2001, 8th Int. Symposium on Practical Design of Ships and other Floating Structures, vol.2 (2001, September)
Least Cost Structural Optimization Oriented Preliminary Designin Ship Production Symposium’2001, SNAME, Ypsilanti, Michigan, USA, Paper #15, Juin 2001 (2001, June)
A Framework for Simulation Bases Design of Ship Structuresin Ship Production Symposium’2001, SNAME: Ypsilanti, Michigan ,USA, Paper #9, June 2001 (2001, June)
Differential Equations of Stiffened Panelsin Dept. of Naval Architecture and Marine Engineering (2001)
Discussion on the Report of Committee II.1 – ISSC’2000 “Quasi-Static Response”in 14th Int. Ship and Offshore Structures Congress, Eds: Ohtsubo and Sumi, Elsevier, Vol. 3 (2001)
Discussion on “Ultimate Limit State Design of Ship Stiffened Panels and Grillagein SNAME’2001 Annual Meeting (2001)
LBR-5, a Ship Hull Optimization Toolin SIMOUEST’2000, European Conference, Marine Technology (2000, November)
ALPS/ULSAP Software for Ultimate Strength Design of Steel Grillages under Combined Loadsin SIMOUEST’2000, European Conference, Marine Technology (2000, November)
Least Cost and Scantling Optimization at the initial Design Stage of Shipsin ICETECH 2000 (2000, September)
Application of the Stiffened Plate Method in Optimizing Hydraulic Structuresin International Colloquium in Mechanics of Solids, Fluids, Structures and Interactions (2000, August)
Discussion sur “On Advanced Buckling and Ultimate Strength Design of Ship plating, SNAME Transactionsin SNAME Transactions, Vol.108 (2000)
Un outil d’optimisation des structures orthotropes intégré à l’avant-projetin Construction Métallique (2000)
Porte de garde du Blanc Pain )Report (2000)
- Assistance à la conception et au dimensionnement (optimisation
Reply to the discussion on the Report of Committee VI.2 – ISSC’2000 "Ultimate Strength of Ship Girder"in ISSC’2000 VI.2 committee (2000)
Least Cost Optimum Design of Stiffened Hydraulic and Floating Structuresin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1999)
L’Aluminium dans les Ouvrages Hydrauliques et le Transportin Chaire Aluminium (Univ of Liege. and Poly Tech) at Mons and Liège, Edt. Belgian Aluminium Association, Brussels, March 1999, pp39-47. (1999)
Développement d’un modèle intégré d’optimisation des structures navales et hydrauliquesin Revue Construction Métallique, Rubrique Thèses, n°1-1999, (1999, January)
"Quasi-Static Response" (Discussion on the Report of Committee II.1); Reply to E. Rizzuto)in 13th Int. Ship and Offshore Structures Congress (1999)
New Integrated Tools to Improve the Traffic and the Port Planningin 29th PIANC International Congress (1999)
Optimization of Ship Structure – Minimum Costin Second International Shipbuilding Conference, ISC’98, Krylov Shipbuilding Research Inst. (1998, November)
Développement d’un modèle intégré d’optimisation des structures navales et hydrauliquesPost doctoral thesis (1998)
Analysis of Double-Skinned Cylindrical Structures by the Stiffened Panel Methodin Offshore Mechanics and Artic Engineering, OMAE’98-0420, Pub. ASME (1998, July)
Storm Surge Barrier and Marine Environmentin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1998), (98), 5-14
Finite Element Comparative Study of Ship Structural Detailsin Marine Structures (1998)
High Rise Navigation Locks - Feasibility Study of 80 m and 113 m Rise Locksin VII Congreso Nacional de Hidraulica (1997, November)
Quasi-Static Responsein 13th Int. Ship and Offshore Structures Congress (1997)
The Numerical Simulations and Physical Model of Pipeline under Wave Actionin Pacific/Asia Offshore Mechanics Symposium, PACOMS 96, Edited by ISOPE (1996, October)
The numerical simulation and physical model test of pipeline under water actionin Proceedings of the Fourth Pacific/Asia Offshore Mechanics Symposium, Pusan, Korea (1996)
Physical Model Tests and Numerical Simulations of a Pipeline under Wave Actionin OMAE’96, vol 1, part A - Offshore Technology, ASME 1996 (1996, June)
The Use of Floating Gates for Storm Surge Barrierin The Use of Floating Gates for Storm Surge Barrier (1996)
Two-Phase Finite Element Comparative Study of a Side Structure of a Middle Size Tankerin Marine Structures (1996)
Benchmarking of Ultimate Strength Predictions for Longitudinally Stiffened Panelsin PRADS’95, The Sixth International Symposium on Practical Design of Ships and Mobile Units, vol.2 (1995, September)
Applied Design - Strength Limit States Formulationsin Applied Design - Strength Limit States Formulations (1994)
More Than Ever: Intelligence is Capitalin The Czech Technical University, Conf.: New Requirements for Structures and their Reliability (1994, June)
Prefabricated Mobile Dams : with the use of Aluminumin 28th International Navigation Congress (PIANC), Section I, subject 5 (1994, May)
La voie navigable Anvers-Dusseldorf pour une liaison Meuse-Rhinein Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1993)
Very High Rise Navigation Locks - Feasibility Study of a 113m Rise Lock for the Three Gorges Sitein International Symposium on Hydraulic Research in Nature and Laboratory, Yangtze River Scientific Research Institute-AIRH (1992, November)
The Biggest One-Span Floating Gate Designed to-datein IASS-CSCE International Congress 1992, Innovative Large Span structures, Vol.1 (1992, July)
Roll Motion of a Floating Storm surge Barrierin Journal of Hydroscience and Hydraulic Engineering (1992)
The Stiffened Sheathings of Orthotropic Cylindrical Shellsin Journal of Structural Engineering (1992)
Estuary protection by storm surge barrier related to sea level rise.in IABSE-AIPC Colloquium (1991, May)
Rolling Experiments on a Floating Tidal Surge Barrierin Annual Meeting of the DPRI, University of Kyoto (1991, February)
Des écluses préfabriquées en aluminium, un "must" en vue du développement de la navigation de plaisancein Annales des Travaux Publics de Belgique (1990), (4), 251-288
The design of the Orthotropic Hydraulic Structures with the L.B.R.-3 Softwarein Hydrosoft Journal (1990)
The Design of Cylindrical Orthotropic Plates and Shellsin IASS Congress, Numerical Methods, Vol. 5 (1989, September)
La méthode des bordages raidis. Calcul des coques cylindriques soumises à une pression hydrauliquein Construction Métallique (1989)
A Software for the Computation and Design of the Stiffened Hydraulic Structuresin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1989)
Calcul des constructions hydrauliques métalliques par la méthode des développements harmoniquesin Annales de l'Institut Technique du Bâtiment et des Travaux Publics (1989)
Le logiciel des bordages raidis, une nouvelle méthode de calcul des coques prismatiquesin Industries et Sciences, A.I.I.H., n°1/89 (1989)
Very High Rise Navigation Locks ; the 3 Gorges Projectin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1989)
Une liaison Liège-Chaudfontaine pour bateaux de plaisance, Li voyèdje di Tchôfontin.nein Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1989)
Le calcul des structures cylindriques flottantesin Association Technique Maritime et Aéronautique (ATMA) (1989)
Conception and Computation of Movable Barragesin Institution of Civil Engineer, World Water'89 (1989)
Calcul et conception des ouvrages métalliques hydrauliques. Application aux vannes des barrages mobilesin Mémorias del V Congreso Nacional de Hidraulica, Quito, Ecuador (1988, December)
Calcul des structures cylindriques métalliques orthotropesin Mémoire du CERES, Université de Liège, n°60 (1988)
Proceedings of the International Conference on Computer Methods and Water Resources, Morocco, vol.4, Springer-Verslagin Proceedings of the International Conference on Computer Methods and Water Resources, Morocco, vol.4, Springer-Verslag (1988, March)
Le réglage des flottaisons dans les biefs par barrages mobiles - Calcul et Conceptionin Proceedings of the International Conference on Computer Methods and Water Resources, Morocco, vol.4, Springer-Verslag (1988, March)
Droit de réponse vis-à-vis des commentaires de MM Peters et Bertrand concernant l'article paru dans le bulletin n°57 de l'AIPCNin Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1988), (62), 172-179
Réglages des niveaux par barrage mobile pour des ouvrages à faibles chutes (3 à 5m)in Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1987)
Le franchissement des chutes pour la navigation de plaisance dans les voies d'eau équipées pour la navigation intérieure. Ecluses pour navigation de plaisancein Bulletin de l'Association Internationale Permanente des Congrès de Navigation (1986)
