Publications and communications of Jean-Philippe Ponthot

Book chapters or contributions to a collective book as author or co-author

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2003). A new formulation of internal forces for non-linear hypoelastic constitutive models verifying conservation laws. In K. J. Bathe (Ed.), Computational Fluid and Solid Mechanics 2003 (pp. 527-531). Elsevier. doi:10.1016/B978-008044046-0.50130-5

Articles accepted in reviewed journal

Bouffioux, C., Papeleux, L., Calvat, M., Tran, H. S., Chen, F., Ponthot, J.-P., Duchene, L., & Habraken, A. (01 November 2024). Efficient Representative Volume Element of a Matrix–Precipitate Microstructure—Application on AlSi10Mg Alloy. Metals, 14 (11), 1244. doi:10.3390/met14111244

Fernandez Sanchez, E. F., Lacroix, M., Février, S., Zhang, T., Papeleux, L., Bobach, B.-J., Boman, R., Ryelandt, S., Simar, A., & Ponthot, J.-P. (2024). Modelling melt pool dynamics in aluminium-to-steel welds performed by friction melt bonding: a challenge addressed with the particle finite element method. Computational Particle Mechanics. doi:10.1007/s40571-024-00852-6

González, Á., Cruchaga, M., Celentano, D., & Ponthot, J.-P. (October 2024). Damage Prediction in the Wire Drawing Process. Metals, 14 (10), 1174. doi:10.3390/met14101174

Gonzalez, A., Celentano, D., Cruchaga, M., & Ponthot, J.-P. (2024). The Triaxiality Effect on Damage Evolution in Al-2024 Tensile Samples. Metals, 14 (10), 1103. doi:10.3390/met14101103

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2023). Efficient Roll-Forming Simulation Using Non-Conformal Meshes with Hanging Nodes Handled by Lagrange Multipliers. Metals. doi:10.3390/met13050895

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., Papeleux, L., & Ponthot, J.-P. (2023). A particle finite element method based on Level–Set functions. Journal of Computational Physics, 112187. doi:10.1016/j.jcp.2023.112187

Falla, R., Bobach, B.-J., Boman, R., Ponthot, J.-P., & Terrapon, V. (2023). Mesh adaption for two-dimensional bounded and free-surface flows with the particle finite element method. Computational Particle Mechanics. doi:10.1007/s40571-022-00541-2

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., & Ponthot, J.-P. (2022). Generalized-alpha scheme in the PFEM for velocity-pressure and displacement-pressure formulations of the incompressible Navier-Stokes equations. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.7101

Böhme, B., Laurent, C., Milis, O., Ponthot, J.-P., & Balligand, M. (2022). Determination of Canine Long Bone Ultimate Tensile Strain by Digital Image correlation. Journal of Orthopedic Research and Therapy, 1221. doi:10.29011/2575-8241.001221

Bobach, B.-J., Boman, R., Celentano, D., Terrapon, V., & Ponthot, J.-P. (2021). Simulation of the Marangoni Effect and Phase Change Using the Particle Finite Element Method. Applied Sciences, 11 (11893). doi:10.3390/app112411893

Colombo-Pulgarin, J. C., Biffi, C. A., Vedani, M., Celentano, D., Sanchez-Egea, A., Boccardo, A. C., & Ponthot, J.-P. (2021). Beta Titanium Alloys Processed by Laser Powder Bed Fusion: a Review. Journal of Materials Engineering and Performance, 30 (9), 6365-6388. doi:10.1007/s11665-021-05800-6

Alvarez, P., Muniz, F., Celentano, D., Artigas, A., Castro cerda, F., Ponthot, J.-P., & Monsalve, A. (2020). Modeling the mechanical response of a Dual-Phase steel based on individual-phase tensile properties. Metals, 10 (1031). doi:10.3390/met10081031

Pacheco, M., Garcia-Herrera, C., Celentano, D., & Ponthot, J.-P. (2020). Mechanical Characterization of the Elastoplastic Response of a C11000-H2 Copper Sheet. Materials, 13, 5193. doi:10.3390/ma13225193

Cerquaglia, M. L., Thomas, D., Boman, R., Terrapon, V., & Ponthot, J.-P. (2019). A fully partitioned Lagrangian framework for FSI problems characterized by free surfaces, large solid deformations and displacements, and strong added-mass effects. Computer Methods in Applied Mechanics and Engineering, 348, 409-442. doi:10.1016/j.cma.2019.01.021

Ponthot, J.-P., Drapier, S., & Feulvarch, E. (Crit. Eds.). (August 2018). Computational modeling of material forming processes. Comptes Rendus de l'Académie des Sciences. Série 2b, Mécanique, 346 (8), 615. doi:10.1016/j.crme.2018.06.011

Böhme, B., d'Otreppe, V., Ponthot, J.-P., & Balligand, M. (June 2016). Intraosseous stress distribution and bone interaction during load application across the canine elbow joint: A preliminary finite element analysis for determination of condylar fracture pathogenesis in immature and mature dogs. Research in Veterinary Science, 106, 146-148. doi:10.1016/j.rvsc.2016.03.014

Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017

Laurent, C., Böhme, B., Mengoni, M., d'Otreppe, V., Balligand, M., & Ponthot, J.-P. (2016). Prediction of the mechanical response of canine humerus to three-point bending using subject-specific finite element modelling. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 230, 639-649. doi:10.1177/0954411916644269

Bussetta, P., Dialami, Chiumenti, M., Agelet de Saracibar, C., Cervera, M., Boman, R., & Ponthot, J.-P. (November 2015). 3D numerical models using a fluid or a solid formulation of FSW processes with non-cylindrical pin. Advanced Modeling and Simulation in Engineering Sciences, 2 (27). doi:10.1186/s40323-015-0048-2

Mengoni, M., & Ponthot, J.-P. (September 2015). An enhanced version of a bone remodelling model based on the continuum damage mechanics theory. Computer Methods in Biomechanics and Biomedical Engineering, 18 (12), 1367-1376. doi:10.1080/10255842.2014.903933

Arnst, M., & Ponthot, J.-P. (2014). An overview of nonintrusive characterization, propagation, and sensitivity analysis of uncertainties in computational mechanics. International Journal for Uncertainty Quantification, 4, 387-421. doi:10.1615/Int.J.UncertaintyQuantification.2014006990

Mengoni, M., Voide, R., de Bien, C., Freichels, H., Jérôme, C., Léonard, A., Toye, D., van Lenthe, G. H., Müller, R., & Ponthot, J.-P. (February 2012). A non-linear homogeneous model for bone-like materials under compressive load. International Journal for Numerical Methods in Biomedical Engineering, 28 (2), 334-348. doi:10.1002/cnm.1473

Pascan, O., Zhang, W., & Ponthot, J.-P. (2012). Mechanical Buckling of Composite Panels with/without Cutouts. International Journal of Plant Engineering and Management, 17 (2), 65-76.

Mengoni, M., & Ponthot, J.-P. (2010). Isotropic continuum damage/repair model for alveolar bone remodelling. Journal of Computational and Applied Mathematics, 234, 2036-2045. doi:10.1016/j.cam.2009.08.061

Ponthot, J.-P., Guo, W., Rauchs, G., & Zhang, W. (2009). Study of the influence of friction in imperfect conical indentation for elasto-plastic material. Tribology - Materials, Surfaces and Interfaces, 3 (4), 151-157. doi:10.1179/175158309X12586382418418

Noels, L., Stainier, L., & Ponthot, J.-P. (2008). A first-order energy-dissipative momentum-conserving scheme for elasto-plasticity using the variational updates formulation. Computer Methods in Applied Mechanics and Engineering, 197 (6-8), 706–726. doi:10.1016/j.cma.2007.09.008

Nsiampa, N., Ponthot, J.-P., & Noels, L. (2008). Comparative study of numerical explicit schemes for impact problems. International Journal of Impact Engineering, 35 (12), 1688-1694. doi:10.1016/j.ijimpeng.2008.07.003

Jeunechamps, P.-P., & Ponthot, J.-P. (August 2006). An efficient implicit approach for the thermomechanical behavior of materials submitted to high strain rates. Journal de Physique IV, 134, 515-520. doi:10.1051/jp4:2006134079

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Simulation of crashworthiness problems with improved contact algorithms for implicit time integration. International Journal of Impact Engineering, 32 (5), 799-825. doi:10.1016/j.ijimpeng.2005.04.010

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Energy conserving balance of explicit time steps to combine implicit and explicit algorithms in structural dynamics. Computer Methods in Applied Mechanics and Engineering, 195 (19-22), 2169–2192. doi:10.1016/j.cma.2005.03.003

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). An energy momentum conserving algorithm using the variational formulation of visco-plastic updates. International Journal for Numerical Methods in Engineering, 65 (6), 904–942. doi:10.1002/nme.1480

Noels, L., Stainier, L., & Ponthot, J.-P. (December 2005). Simulation of complex impact problems with implicit time algorithms: Application to a turbo-engine blade loss problem. International Journal of Impact Engineering, 32 (1-4), 358–386. doi:10.1016/j.ijimpeng.2005.06.003

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Simulation of complex impact problems with implicit time algorithms. Application to crashworthiness problems. Matériaux et Techniques, 15-19.

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). On the use of large time steps with an energy momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal of Solids and Structures, 41 (3-4), 663–693. doi:10.1016/j.ijsolstr.2003.09.032

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit time-integration algorithms for the numerical simulation of sheet metal forming. Journal of Computational and Applied Mathematics, 168 (1-2, Sp. Iss. SI), 331-339. doi:10.1016/j.cam.2003.12.004

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit algorithms for crashworthiness analysis. International Journal of Impact Engineering, 30 (8-9, SEP-OCT), 1161-1177. doi:10.1016/j.ijimpeng.2004.03.004

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). An energy-momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal for Numerical Methods in Engineering, 59 (1), 83-114. doi:10.1002/nme.869

Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Self-adapting time integration management in crash-worthiness and sheet metal forming computations. International Journal of Vehicle Design, 30 (1-2), 67-114. doi:10.1504/IJVD.2002.002026

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Détermination automatique de la taille du pas de temps pour les schémas implicites en dynamique non-linéaire. Mécanique and Industries, 3 (1), 63-77. doi:10.1016/S1296-2139(01)01134-4

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Automatic time stepping algorithms for implicit numerical simulations of non-linear dynamics. Advances in Engineering Software, 33 (7-10, JUL-OCT), 589-603. doi:10.1016/S0965-9978(02)00073-X

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2001). Automatic time stepping algorithms for implicit numerical simulations of blade/casing interactions. International Journal of Crashworthiness, 6 (3), 351-362. doi:10.1533/cras.2001.0183

Articles accepted in conference proceedings

Bobach, B.-J., Falla, R., Boman, R., Terrapon, V., & Ponthot, J.-P. (2021). Phase change driven adaptive mesh refinement in PFEM. In ESAFORM 2021: proceedings of the 24th International Conference on Material Forming : 14-16 April 2021. doi:10.25518/esaform21.3861

Garcia-Garino, C., Careglio, C., Pacini, E., Mirasso, A., Celentano, D., Papeleux, L., & Ponthot, J.-P. (2021). Simulacion Numerica Del Ensayo De Traccion Simple Para Probetas Delgadas. Analisis Del Caso Limite 3D. In XXIII Workshop de Investigadores en Ciencias de la Computación.

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2021). Element activation method and non-conformal dynamic remeshing strategy to model additive manufacturing. In ESAFORM 2021: proceedings of the 24th International Conference on Material Forming : 14-16 April 2021. doi:10.25518/esaform21.2320

Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2018). Thermomechanical simulations of blanking process operated over a wide range of punch velocities. Journal of Physics. Conference Series, 1063, 012014. doi:10.1088/1742-6596/1063/1/012014

Cerquaglia, M. L., Deliège, G., Boman, R., & Ponthot, J.-P. (2017). Preliminary assessment of the possibilities of the Particle Finite Element Method in the numerical simulation of bird impact on aeronautical structures. Procedia Engineering, 173, 101-108. doi:10.1016/j.proeng.2016.12.043

Canales Cardenas, C., & Ponthot, J.-P. (2016). Numerical prediction of ductile failure in the blanking process by means of uncoupled and coupled phenomenological damage models. MATEC Web of Conferences. doi:10.1051/matecconf/20168003006

Boemer, D., Rycerski, S., Vis, J., & Ponthot, J.-P. (2015). Discrete Element Method Modeling of Ball Mills - Liner Wear Evolution. In E. Oñate, M. Bischoff, D. R. J. Owen, P. Wriggers, ... T. Zohdi, Proceedings of the IV International Conference on Particle-Based Methods – Fundamentals and Applications. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).

Ponthot, J.-P., Koeune, R., & Boman, R. (2013). A continuous fluid/solid transition model for semi-solid material modeling. Application to thixoforging. In 33° SENAFOR (CD) (pp. 08).

Mengoni, M., D'Otreppe, V., & Ponthot, J.-P. (2012). A fully nonlinear finite element model for orthodontic tooth movement prediction. In Proceedings of the 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering.

Bussetta, P., Boman, R., & Ponthot, J.-P. (2011). Comparison of Data Transfer Methods between Meshes in the Frame of the Arbitrary Lagrangian Eulerien Formalism. In Proceedings of "Fifth International Conference on Advanced COmputationalMethods in ENgineering".

Bussetta, P., & Ponthot, J.-P. (2011). Comparison of Data Transfer Methods between two different meshes. In Proceedings of "IV International Conference on Computational Methods for Coupled Problems in Science and Engineering".

Mengoni, M., Voide, R., Toye, D., Léonard, A., van Lenthe, G. H., & Ponthot, J.-P. (2011). A non-linear homogeneous model for bone-like materials under compressive load. In P. Nithiarasu, R. Löhner, R. van Loon, I. Sazonov, ... X. Xie (Eds.), Conference Proceedings - 2nd International Conference on Computational & Mathematical Biomedical Engineering (pp. 355-358).

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010). Multiple material mesh generation for biomedical applications. In Proceedings of the 9th belgian day on biomedical engineering.

Bussetta, P., & Ponthot, J.-P. (2010). Comparison of Field Transfer Methods between two meshes. In Proceedings of "IV European Conference on Computational Mechanics".

Mengoni, M., & Ponthot, J.-P. (2010). A Continuum Damage Mechanics based bone remodelling model in a finite strain framework. In ECCM 2010, 4th European Conference on Computational Mechanics (pp. 15).

Mengoni, M., & Ponthot, J.-P. (2009). Anisotropic continuum damage model coupled to viscoplasticity for a pressure dependent alveolar bone remodeling law. In National Congress on Theoretical and Applied Mechanics.

Andia Fages, S., Raichman, S., Mirasso, A., Garcia Garino, C., & Ponthot, J.-P. (2009). Integracion Numerica del Problema Viscoplastico [Paper presentation]. Encuentro de investigadores y docentes de ingeniera 2009, Los Reyunos, Argentina.

Bussetta, P., Marceau, D., & Ponthot, J.-P. (2009). Résolution du problème de contact mécanique frottant : méthode du lagrangien augmenté adapté. In Proceedings of “9ème Colloque National en Calcul des Structures.

Mengoni, M., & Ponthot, J.-P. (2009). A pressure dependent bone remodeling model for application in orthodontics. In XXIInd Congress of the International Society of Biomechanics.

Mengoni, M., & Ponthot, J.-P. (2008). A continuum damage model for alveolar bone remodeling. In Fourth International Conference on Advance COmputational Methods in ENgineering - ACOMEN 2008.

Mengoni, M., & Ponthot, J.-P. (2008). A damage/repair model for alveolar bone remodeling. In Middleton, Evans, Holt, Jacobs, ... Walker (Eds.), 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering : CMBBE2008, Porto, Porugal. Arup.

Fancello, E., Vigneron, L., Noels, L., Ponthot, J.-P., Boman, R., & Stainier, L. (2007). Identificación de parámetros de viscoelasticidad finita aplicada a la simulación del comportamiento mecánico de masa encefálica. In Congreso Iberoamericano de Ingenieria Mecanica.

Mengoni, M., Charlier, R., & Ponthot, J.-P. (2007). Une comparaison de différents modèles élasto-plastiques pour la modélisation du remodelage osseux en orthodontie. In 8ème Colloque National en Calcul des Structures.

Montmitonnet, P., Stephany, A., Cassarini, S., Ponthot, J.-P., Laugier, M., & Legrand, N. (2007). Modelling of metal forming lubrication by O/W emulsions. In Modelling of metal forming lubrifrication by O/W emulsions (pp. 85-90).

Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D. Santos & A. Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).

Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C. Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.

Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. In Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.

Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Combined Implicit/Explicit Time Integration Algorithms for the Numerical Simulation of Sheet Metal Forming. In Proceedings of ACOMEN 2002.

Boman, R., & Ponthot, J.-P. (2000). ALE Methods for Determining Stationary Solutions Metal Forming Processes. In E. Oñate, G. Bugeda, ... B. Suárez (Eds.), Proceedings of ECCOMAS 2000/COMPLAS VI, European Congress on Computational Methods in Applied Sciences and Engineering.

Lilien, J.-L., & Ponthot, J.-P. (1988). Overhead lines galloping - Modelisation. Modeling and Simulation of Electrical Machines and Power Systems. In D. K. TRAN & J. Robert (Eds.), IMACS (pp. 103-110). Elsevier Science Publishers B.V.

Oral presentations in conferences with scientific selection committee

Delhez, J., Lacroix, M., & Ponthot, J.-P. (03 September 2025). Application of the PFEM to the study of blood flows and their interactions with artery walls [Paper presentation]. International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Barcelone, Spain.

Lacroix, M., Février, S., Fernandez Sanchez, E. F., Papeleux, L., Boman, R., & Ponthot, J.-P. (24 July 2024). Applications of the Particle Finite Element Method for 3D Fluid-Structure Interactions and Multiphysics Simulations [Paper presentation]. 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics, Vancouver, Canada.

Lacroix, M., Février, S., Fernandez Sanchez, E. F., Papeleux, L., Boman, R., & Ponthot, J.-P. (10 October 2023). Comparison of Interpolation Algorithms on Non-Matching Meshes for Partitioned Thermo-Mechanical Fluid-Structure Interactions [Paper presentation]. 9th International Conference on Particle-Based Methods, Milan, Italy.

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Papeleux, L., Boman, R., & Ponthot, J.-P. (June 2023). A new remeshing strategy relying on level-set functions for the Particle Finite Element Method [Paper presentation]. International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), Chania, Greece.

Bobach, B.-J., Boman, R., Celentano, D., Terrapon, V., & Ponthot, J.-P. (02 September 2022). Towards a PFEM-based unified thermo-fluid-solid simulation tool for phase change problems [Paper presentation]. 8th international conference on "Advanced COmputational Methods in ENgineering", Liège, Belgium.

Février, S., Boman, R., & Ponthot, J.-P. (02 September 2022). Particle Finite Element Method for simulations of Selective Laser Melting with vaporization [Paper presentation]. ACOMEN Congress 2022, Liège, Belgium.

Lacroix, M., Février, S., Boman, R., Remacle, J.-F., & Ponthot, J.-P. (01 September 2022). Particle Finite Element Method (PFEM) for 2D/3D Fluid-Structure Interactions, Including Contact Interactions [Paper presentation]. 8th International Conference on Advanced Computational Methods in Engineering, Liège, Belgium.

Février, S., Boman, R., & Ponthot, J.-P. (09 June 2022). Particle Finite Element Method for simulations of Selective Laser Melting with vaporization [Paper presentation]. ECCOMAS Congress 2022, Oslo, Norway.

Lacroix, M., Février, S., Boman, R., Remacle, J.-F., & Ponthot, J.-P. (06 June 2022). Particle Finite Element Method for 2D/3D Fluid-Structure Interactions, Including Contact Interactions [Paper presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway.

Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal.

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., & Ponthot, J.-P. (07 January 2022). Application of the Generalized-alpha time integration scheme in PFEM for solving the incompressible Navier-Stokes equations [Paper presentation]. European Community on Computational Methods in Applied Sciences (ECCOMAS), Oslo, Norway.