Publications and communications of Chantal Bouffioux

Articles in scientific journals with peer reviewing

Tran, H. S., Bouffioux, C., Dedry, O., Rojas Ulloa, C. E., Duchene, L., Mertens, A., & Habraken, A. (2022). Identification of a soft matrix-hard inclusion material by indentation. International Journal of Mechanical Sciences, 107723. doi:10.1016/j.ijmecsci.2022.107723

Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017

Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23 (3), 420-449. doi:10.1016/j.ijplas.2006.05.006

Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26. doi:10.1016/j.jmatprotec.2006.10.044

Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502. doi:10.4028/0-87849-437-5.495

Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463.

Scientific conferences in universities or research centers

Habraken, A., Pedro, J. O., Toussaint, P., Maas, F., Bouffioux, C., Breunig, S., Kuhlmann, U., Pourostad, V., Rigueiro, C., & Claudio, B. (03 May 2017). Design guidelines for Optimal Use of HSS in Bridges [Paper presentation]. Workshop OPTIBRI, Stuttgart, Germany.

Scientific congresses and symposiums

Published communications

Dedry, O., Bouffioux, C., Tran, H. S., Santos Macías, J. G., Habraken, A., & Mertens, A. (2021). Identification of AlSi10Mg matrix behavior by nanoindentation. In 24th International Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2464

Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N. Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144).

Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H. Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH.

Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M. Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference.

Van Bael, A., Eyckens, P., He, S., Bouffioux, C., Henrard, C., Habraken, A., Duflou, J., & Van Houtte, P. (2007). Forming limit predictions for single-point incremental sheet metal forming. In E. Cueto & F. Chinesta, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 309-314). Springer.

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D. Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Romania: The publishing House of the Romanian Academy.

Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), United States: American Institute of Physics (AIP).

He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., Henrard, C., Bouffioux, C., & Habraken, A. (2005). Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 711-714). The publishing House of the Romanian Academy.

Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy.

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S. Gosh, J. M. Castro, ... J. K. Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings.

Oral communications or posters

Habraken, A., Bouffioux, C., Dedry, O., Fetni Seif, Sepulveda, H., Duchene, L., & Mertens, A. (25 May 2023). Fatigue crack prediction in Multiphasic-Phasic Material [Paper presentation]. 3rd Benelux Network Meeting and Workshop on Damage and Fracture Mechanics (BDFM-2023).

Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal.

Tran Hoang, S., Bouffioux, C., Dedry, O., Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (04 April 2022). Prediction of static properties of LPBFAlSi10Mg samples post-treated by Friction Stir Processing or thermal treatments [Paper presentation]. EMMC18 – 18th European Mechanics of Materials Conference.

Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (June 2017). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES [Paper presentation]. 14th International Conference on Fracture - ICF14, Rhodes, Greece.

Bouffioux, C., Habraken, A., Duchene, L., & Canales Cardenas, C. (03 May 2017). Characterization of Fatigue Behaviour, from Material Science to Civil Engineering Applications [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (03 May 2017). OPTIBRI Opening and Project Overview [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.

Other publications and communications

Speeches and writings for a general audience

Others

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017). Optimal use of High Strength Steel grades within bridge.

Levasseur, S., & Bouffioux, C. (2013). Back Analysis and optimisation method with Lagamine [Paper presentation]. First International Workshop on the Finite Element Code Lagamine, Liège, Belgium.