Publications et communications de Anne Habraken

LégendeIndices bibliométriques liés à la revue (pour celles dont l'ISSN a été indiqué par l'auteur) IF = Impact factor Thomson ISI. Sont indiqués : IF de l’année de publication et IF de la dernière édition du JCR (latest), « ? » si pas encore connu d'ORBi ; « - »  si inexistant. IF5 : idem que IF mais pour une période de 5 ans (nouvel indice depuis 2009). Suite à la décision des recteurs francophones d'abandonner la souscription au JCR Impact Factor, les données IF et IF5 ne sont plus mises à jour à partir de 2015. L'indice "latest" correspond à l'indice 2014 de la revue, ou de la dernière année de présence de la revue dans le JCR. EigenF = EigenFactor (voir : http://www.eigenfactor.org/). Article Infl. = Article Influence : EigenFactor divisé par le nombre d’articles publiés dans cette revue. En savoir plus ? http://orbi.uliege.be/rpt#revIndices bibliométriques liés à l'article ORBi viewed = nombre total de visualisations de la référence sur ORBi (dont X en interne à l'ULiège). ORBi downloaded = nombre total de téléchargements du texte intégral via ORBi, y compris tirés à part. SCOPUS® = nombre de citations du document repérées par SCOPUS®. En savoir plus ? http://orbi.uliege.be/rpt#art(Avertissement : en fonction des disciplines, certains indicateurs bibliométriques peuvent ne pas se révéler pertinents)__________________________________ , , etc: texte intégral du document disponible en Open Access , , etc: texte intégral du document disponible en accès restreint Peer reviewed (vérifié par ORBi) : l'information est présente dans la base ORBi des périodiques

1. Thèses et mémoires

1.a. Thèses d'agrégation de l'enseignement supérieur

Habraken, A. (2001). Contributions to Constitutive Laws of Metals: Micro-Macro and Damage Models (Part A & B). Unpublished post doctoral thesis (Agrégation de l'enseignement supérieur), Université de Liège, ​Liège, ​​Belgique.
ORBi viewed: 66 (17 ULiège) ; downloaded: 304 (24 ULiège) — SCOPUS®: -
Habraken, A. (2001). Contributions to Constitutive Las of Metals: Micro-Macro and Damage Models (Part C and D). Unpublished post doctoral thesis (Agrégation de l'enseignement supérieur), Université de Liège, ​​Belgique.
ORBi viewed: 30 (5 ULiège) ; downloaded: 241 (17 ULiège) — SCOPUS®: -

1.b. Thèses de doctorat

3. Articles dans des revues scientifiques avec peer reviewing

3.a. À portée internationale

En tant que premier ou dernier auteur

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 36 (12 ULiège) ; downloaded: 0 — SCOPUS®: 0
IF 2019: ?; latest: 2.437; IF5: 2.412 — EigenF 2019: ?; latest: 0.048 — Article Infl. 2019: ?; latest: 0.5
Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142.
Peer reviewed
ORBi viewed: 106 (41 ULiège) ; downloaded: 14 (13 ULiège) — SCOPUS®: 11 (10 sans les autocitations)
IF 2017: ?; latest: 3.997; IF5: 4.023 — EigenF: — Article Infl.:
Neira Torres, I., Gilles, G., Tchuindjang, J. T., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2017). FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. International Journal of Material Forming, Volume 10(Issue 3), 287–305.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 57 (33 ULiège) ; downloaded: 41 (17 ULiège) — SCOPUS®: 0
IF 2017: ?; latest: 1.241; IF5: 0.882 — EigenF 2017: ?; latest: 0.002 — Article Infl. 2017: ?; latest: 0.3
Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 34 (9 ULiège) ; downloaded: 52 (6 ULiège) — SCOPUS®: 5 (5 sans les autocitations)
IF 2016: ?; latest: 2.063; IF5: 2.158 — EigenF 2016: ?; latest: 0.006 — Article Infl. 2016: ?; latest: 0.5
Balan, T., Lemoine, X., Maire, E., & Habraken, A. (2015, September). Implementation of a damage evolution law for dual-phase steels in Gurson-type models. Materials and Design, (88), 1213-1222.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 43 (9 ULiège) ; downloaded: 127 (3 ULiège) — SCOPUS®: 4 (4 sans les autocitations)
IF 2015: 3.997; latest: 3.997; IF5: 4.023 — EigenF 2015: 0.059; latest: 0.059 — Article Infl. 2015: 0.9; latest: 0.9
HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 46 (5 ULiège) ; downloaded: 152 (6 ULiège) — SCOPUS®: 9 (7 sans les autocitations)
IF 2015: 2.636; latest: 2.636; IF5: 2.812 — EigenF: — Article Infl.:
Tuninetti, V., Gilles, G., Pardoen, T., & Habraken, A. (2015). Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6A1-4V. International Journal of Plasticity, 67, 53-68.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 94 (32 ULiège) ; downloaded: 17 (17 ULiège) — SCOPUS®: 37 (35 sans les autocitations)
IF 2015: 5.623; latest: 5.623; IF5: 6.23 — EigenF 2015: ?; latest: 0.016 — Article Infl. 2015: ?; latest: 1.9
Ben Bettaïeb, M., Van Hoof, T., Minnebo, H., Pardoen, T., Dufour, P., Jacques, P., & Habraken, A. (2015). Micromechanics-Based Damage Analysis of Fracture in Ti5553 Alloy with Application to Bolted Sectors. Journal of Materials Engineering and Performance, 24, 1262-1278.
Peer reviewed
ORBi viewed: 38 (13 ULiège) ; downloaded: 9 (9 ULiège) — SCOPUS®: 0
ben bettaieb, M., Van Hoof, T., Pardoen, T., dufour, P., Lenain, A., Pascal, J.-J., & Habraken, A. (2014). On the Elasto-viscoplastic behavior of the Ti5553 alloy. Materials Science and Engineering: A, 617, 97-109.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 68 (23 ULiège) ; downloaded: 7 (6 ULiège) — SCOPUS®: 0
IF 2014: 2.567; latest: -; IF5: - — EigenF 2014: 0.072; latest: 0.072 — Article Infl. 2014: 0.8; latest: 0.8
Hug, E., keller, C., & Habraken, A. (2014). Impact of metallurgical size effects on plasticity of thin metallic materials. Materials Science Forum, 783-786, 2290-2295.
Peer reviewed
ORBi viewed: 37 (19 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 0
Tuninetti Vásquez, V., & Habraken, A. (2014). Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6A1-4V alloy. Materials Science and Engineering: A, (605), 39-50.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 68 (26 ULiège) ; downloaded: 326 (16 ULiège) — SCOPUS®: 9 (6 sans les autocitations)
IF 2014: 2.567; latest: -; IF5: - — EigenF 2014: 0.072; latest: 0.072 — Article Infl. 2014: 0.8; latest: 0.8
Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., sinnaeve, M., & Habraken, A. (2014). Study of residual stresses in bimetallic work rolls. Advanced Materials Research, 996, 580-585.
Peer reviewed
ORBi viewed: 98 (34 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: 4 (1 sans les autocitations)
Bouffioux, C., Boman, R., Caillet, N., Rich, N., Ponthot, J.-P., & Habraken, A. (2014). Effect of the kinematic hardening in the simulations of the straightening of long rolled profiles. Key Engineering Materials, 611-612, 178-185.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 43 (15 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Fansi Tchonko, J., Balan, T., Lemoine, X., Maire, E., Landron, C., Bouaziz, O., Ben Bettaieb, M., & Habraken, A. (2013). Numerical investigation and experimental validation of physically-based advanced GTN model for DP steels. Materials Science and Engineering: A, 569, 1-12.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 107 (36 ULiège) ; downloaded: 97 (20 ULiège) — SCOPUS®: 12 (7 sans les autocitations)
IF 2013: 2.409; latest: -; IF5: - — EigenF 2013: 0.077; latest: 0.072 — Article Infl. 2013: 0.7; latest: 0.8
Duchene, L., Guzmán Inostroza, C. F., Behera, A. K., Duflou, J., & Habraken, A. (2013, March). Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-shell finite elements. Key Engineering Materials.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 164 (70 ULiège) ; downloaded: 159 (36 ULiège) — SCOPUS®: 6 (2 sans les autocitations)
Guzmán Inostroza, C. F., & Habraken, A. (2013). Towards fracture prediction in single point incremental forming. Key Engineering Materials, 554-557, 2355-2362.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 192 (40 ULiège) ; downloaded: 108 (23 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
Guzmán Inostroza, C. F., Gu, J., Duflou, J., Vanhove, H., Flores, P., & Habraken, A. (2012). Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations. International Journal of Solids and Structures, 49(25), 3594-3604.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 85 (40 ULiège) ; downloaded: 152 (22 ULiège) — SCOPUS®: 29 (22 sans les autocitations)
IF 2012: 1.871; latest: 2.081; IF5: 2.56 — EigenF 2012: 0.031; latest: 0.026 — Article Infl. 2012: 0.9; latest: 1.0
Ben bettaieb, M., Lenain, A., & Habraken, A. (2012). Static and fatigue characterization of the Ti5553 titanium alloy. Fatigue and Fracture of Engineering Materials and Structures, (36), 401-415.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 59 (5 ULiège) ; downloaded: 279 (8 ULiège) — SCOPUS®: -
IF 2012: 0.861; latest: 1.838; IF5: 1.588 — EigenF 2012: 0.004; latest: 0.004 — Article Infl. 2012: 0.5; latest: 0.5
Tuninetti Vásquez, V., Gilles, G., Milis, O., Lecarme, L., & Habraken, A. (2012). Compression test for plastic anisotropy characterization using optical full-field dis-placement measurement technique. Steel Research International.
Peer reviewed
ORBi viewed: 228 (108 ULiège) ; downloaded: 56 (39 ULiège) — SCOPUS®: 3 (0 sans les autocitations)
IF 2012: 0.493; latest: 1.021; IF5: 0.833 — EigenF 2012: 0.004; latest: 0.005 — Article Infl. 2012: 0.2; latest: 0.3
Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211(11), 1684-1693.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 99 (32 ULiège) ; downloaded: 15 (14 ULiège) — SCOPUS®: 13 (10 sans les autocitations)
IF 2011: 1.783; latest: 2.359; IF5: 2.748 — EigenF 2011: 0.037; latest: 0.022 — Article Infl. 2011: 0.6; latest: 0.8
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2011). On the numerical integration of an advanced Gurson model. International Journal for Numerical Methods in Engineering, 85(8), 1049-1072.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 125 (38 ULiège) ; downloaded: 21 (20 ULiège) — SCOPUS®: 14 (3 sans les autocitations)
IF 2011: 2.009; latest: 2.1; IF5: 2.724 — EigenF 2011: 0.029; latest: 0.026 — Article Infl. 2011: 1.1; latest: 1.3
Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clement, N., Diarra, H., & Habraken, A. (2011). Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests. European Journal of Mechanics. A, Solids, 30, 248-255.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 112 (34 ULiège) ; downloaded: 12 (11 ULiège) — SCOPUS®: 13 (13 sans les autocitations)
IF 2011: 1.484; latest: 2.453; IF5: 2.467 — EigenF 2011: 0.006; latest: 0.007 — Article Infl. 2011: 0.8; latest: 0.8
Verlinden, B., Chen, E., Duchene, L., & Habraken, A. (2011). Transient yielding during compression tests on ECAP’ed AA1050 Aluminium. Materials Science Forum, 667-669, 955-960.
Peer reviewed
ORBi viewed: 55 (10 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Fansi Tchonko, J., Ben Bettaieb, M., Balan, T., Lemoine, X., & Habraken, A. (2011). Notched Specimens Fracture Prediction with an Advanced GTN Model. Key Engineering Materials, 488-489, 77-80.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 51 (12 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 0
Henrard, C., Bouffioux, C., Eyckens, P., Sol, H., Duflou, J. R., Van Houtte, P., Van Bael, A., Duchene, L., & Habraken, A. (2011). Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Computational Mechanics, 47, 573-590.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 333 (92 ULiège) ; downloaded: 35 (25 ULiège) — SCOPUS®: 56 (48 sans les autocitations)
IF 2011: 2.065; latest: 2.639; IF5: 2.746 — EigenF 2011: 0.011; latest: 0.009 — Article Infl. 2011: 1.0; latest: 1.0
Lequesne, C., Plumier, A., Duchene, L., & Habraken, A. (2010). Modeling of Crack Propagation in Weld Beam-to-Column Connection Submitted to Cyclic Loading with Cohesive Zone Model. Journal of ASTM International, 7(5).
Peer reviewed
ORBi viewed: 182 (39 ULiège) ; downloaded: 14 (10 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part I: Theoretical development and numerical implementation. Materials Science and Engineering: A, 528(1), 434-441.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 56 (17 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 6 (4 sans les autocitations)
IF 2010: 2.101; latest: -; IF5: - — EigenF 2010: 0.101; latest: 0.072 — Article Infl. 2010: 0.7; latest: 0.8
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part II: Numerical investigations. Materials Science and Engineering: A, 528(1), 442-448.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 80 (14 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 5 (4 sans les autocitations)
IF 2010: 2.101; latest: -; IF5: - — EigenF 2010: 0.101; latest: 0.072 — Article Infl. 2010: 0.7; latest: 0.8
Flores, P., Tuninetti Vásquez, V., Gilles, G., Gonry, P., Duchene, L., & Habraken, A. (2010). Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Journal of Materials Processing Technology, 210, 1772-1779.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 113 (56 ULiège) ; downloaded: 21 (21 ULiège) — SCOPUS®: 24 (17 sans les autocitations)
IF 2010: 1.57; latest: 2.359; IF5: 2.748 — EigenF 2010: 0.038; latest: 0.022 — Article Infl. 2010: 0.5; latest: 0.8
Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clément, N., Diarra, H., & Habraken, A. (2009). Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553. Acta Materialia, (57), 5186 - 5195.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 197 (47 ULiège) ; downloaded: 260 (22 ULiège) — SCOPUS®: 30 (29 sans les autocitations)
IF 2009: 3.76; latest: 5.058; IF5: 5.149 — EigenF 2009: 0.106; latest: 0.091 — Article Infl. 2009: 1.8; latest: 1.7
Rossi, B., Degée, H., & Habraken, A. (2008). Analytical formulation for actual mechanical properties of stainless steel structural members. Steel Research International, 79(2), 265-272.
Peer reviewed
ORBi viewed: 92 (32 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
IF 2008: 0.344; latest: 1.021; IF5: 0.833 — EigenF 2008: 0.003; latest: 0.005 — Article Infl. 2008: 0.2; latest: 0.3
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2008). Study of bendability of steel sheets. Steel Research International, (79/1), 225-232.
Peer reviewed
ORBi viewed: 473 (38 ULiège) ; downloaded: 327 (17 ULiège) — SCOPUS®: -
IF 2008: 0.344; latest: 1.021; IF5: 0.833 — EigenF 2008: 0.003; latest: 0.005 — Article Infl. 2008: 0.2; latest: 0.3
Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 81 (21 ULiège) ; downloaded: 191 (20 ULiège) — SCOPUS®: 24 (18 sans les autocitations)
IF 2008: 3.875; latest: 5.623; IF5: 6.23 — EigenF 2008: 0.014; latest: 0.016 — Article Infl. 2008: 1.4; latest: 1.9
Duflou, J. R., Verbert, J., Belkassem, B., Gu, J., Sol, H., Henrard, C., & Habraken, A. (2008). Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Annals - Manufacturing Technology, (57), 253-256.
Peer reviewed
ORBi viewed: 121 (5 ULiège) ; downloaded: 501 (3 ULiège) — SCOPUS®: 106 (86 sans les autocitations)
IF 2008: 1.123; latest: 2.492; IF5: 3.195 — EigenF 2008: 0.005; latest: 0.009 — Article Infl. 2008: 0.3; latest: 0.7
Pascon, F., & Habraken, A. (2007). Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs. Computer Methods in Applied Mechanics and Engineering, 196, 2285-5599.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 118 (13 ULiège) ; downloaded: 312 (9 ULiège) — SCOPUS®: 17 (16 sans les autocitations)
IF 2007: 1.488; latest: 3.467; IF5: 3.915 — EigenF 2007: 0.036; latest: 0.033 — Article Infl. 2007: 1.1; latest: 1.6
Schwartz, R., Castagne, S., & Habraken, A. (2007). Numerical study to identify the material parameters of a damage model. Computer Methods in Materials Science, 7(2), 237-242.
Peer reviewed
ORBi viewed: 97 (31 ULiège) ; downloaded: 75 (13 ULiège) — SCOPUS®: -
Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 142 (19 ULiège) ; downloaded: 115 (9 ULiège) — SCOPUS®: 5 (5 sans les autocitations)
IF 2007: 0.816; latest: 2.359; IF5: 2.748 — EigenF 2007: 0.032; latest: 0.022 — Article Infl. 2007: 0.3; latest: 0.8
Castagne, S., Talamona, D., & Habraken, A. (2007). A damage constitutive law for steel elevated temperature. Identification of the parameters. International Journal of Material Processing, (1), 23-43.
Peer reviewed
ORBi viewed: 72 (10 ULiège) ; downloaded: 105 (9 ULiège) — SCOPUS®: -
Duchene, L., El Houdaigui, F., & Habraken, A. (2007). Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity, 23(8), 1417-1438.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 103 (11 ULiège) ; downloaded: 244 (9 ULiège) — SCOPUS®: 34 (22 sans les autocitations)
IF 2007: 4.516; latest: 5.623; IF5: 6.23 — EigenF 2007: 0.013; latest: 0.016 — Article Infl. 2007: 1.3; latest: 1.9
Flores, P., Bonnet, F., & Habraken, A. (2007). Plane strain test for metal sheet characterization. Key Engineering Materials, 344, 135-142.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 156 (17 ULiège) ; downloaded: 197 (12 ULiège) — SCOPUS®: 3 (1 sans les autocitations)
Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 89 (16 ULiège) ; downloaded: 155 (8 ULiège) — SCOPUS®: 14 (10 sans les autocitations)
Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23(3), 420-449.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 126 (20 ULiège) ; downloaded: 492 (13 ULiège) — SCOPUS®: 66 (46 sans les autocitations)
IF 2007: 4.516; latest: 5.623; IF5: 6.23 — EigenF 2007: 0.013; latest: 0.016 — Article Infl. 2007: 1.3; latest: 1.9
Pascon, F., Cescotto, S., & Habraken, A. (2006). A 2.5 D finite element model for bending and straightening in continuous casting of steel slabs. International Journal for Numerical Methods in Engineering, (68), 125-149.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 145 (9 ULiège) ; downloaded: 6 (3 ULiège) — SCOPUS®: 7 (6 sans les autocitations)
IF 2006: 1.497; latest: 2.1; IF5: 2.724 — EigenF 2006: 0.040; latest: 0.026 — Article Infl. 2006: 1.2; latest: 1.3
Lecomte-Beckers, J., Moureaux, P., Carton, M., & Habraken, A. (2006). Characterization of Duplex steel Uranus 76N during deformation and heat treatment. Physica Status Solidi A. Applications and Materials Science, 203(15), 3651-3664.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 95 (7 ULiège) ; downloaded: 53 — SCOPUS®: 2 (2 sans les autocitations)
IF 2006: -; latest: 1.648; IF5: 1.446 — EigenF 2006: -; latest: 0.015 — Article Infl. 2006: -; latest: 0.4
Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., & Habraken, A. (2006). Quality assessment of speckle patterns for digital image correlation. Optics and Lasers in Engineering, 44(11), 1132-1145.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 335 (2 ULiège) ; downloaded: 1353 (2 ULiège) — SCOPUS®: 254 (250 sans les autocitations)
IF 2006: 0.977; latest: 2.319; IF5: 2.209 — EigenF 2006: 0.004; latest: 0.009 — Article Infl. 2006: 0.3; latest: 0.5
He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., & Habraken, A. (2006). An FEM-aided investigation of the deformation during single point incremental forming. Modelling and Simulation in Materials Science and Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 54 (2 ULiège) ; downloaded: 234 (1 ULiège) — SCOPUS®: -
IF 2006: 1.457; latest: 1.859; IF5: 2.364 — EigenF 2006: 0.006; latest: 0.010 — Article Infl. 2006: 0.7; latest: 1.2
Duchene, L., & Habraken, A. (2005). Analysis of the sensivity of FEM predictions to numerical parameters in deep drawing simulations. European Journal of Mechanics. A, Solids, (24), 614-629.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 120 (6 ULiège) ; downloaded: 309 (7 ULiège) — SCOPUS®: 28 (22 sans les autocitations)
IF 2005: 1.071; latest: 2.453; IF5: 2.467 — EigenF 2005: 0.007; latest: 0.007 — Article Infl. 2005: 0.9; latest: 0.8
Flores, P., Rondia, E., & Habraken, A. (2005). Development of an experimental equipment for the identification of constitutive laws. International Journal of Forming Processes, (Special Issue), 117-137.
Peer reviewed
ORBi viewed: 124 (27 ULiège) ; downloaded: 9 (5 ULiège) — SCOPUS®: -
He, S., Van Bael, A., Van Houtte, P., Szekeres, A., Duflou, J., Henrard, C., & Habraken, A. (2005). Finite element modeling of incremental forming of aluminium sheets. Advanced Materials Research, 6/8, 525-532.
Peer reviewed
ORBi viewed: 115 (4 ULiège) ; downloaded: 585 (5 ULiège) — SCOPUS®: 22 (8 sans les autocitations)
Habraken, A. (2004). Modelling the plastic anisotropy of metals. Archives of Computational Methods in Engineering, 11, 3-96.
Peer reviewed
ORBi viewed: 51 (4 ULiège) ; downloaded: 9 (3 ULiège) — SCOPUS®: 29 (28 sans les autocitations)
IF 2004: 1.182; latest: 4.214; IF5: 5.971 — EigenF 2004: 0.001; latest: 0.003 — Article Infl. 2004: 1.2; latest: 2.9
Habraken, A., & Duchene, L. (2004). Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity, 20(Issue 8-9), 1525-1560.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 80 (9 ULiège) ; downloaded: 349 (8 ULiège) — SCOPUS®: 50 (33 sans les autocitations)
IF 2004: 3.819; latest: 5.623; IF5: 6.23 — EigenF 2004: 0.012; latest: 0.016 — Article Infl. 2004: 1.4; latest: 1.9
Castagne, S., Pascon, F., Blès, G., & Habraken, A. (2004). Developments in finite element simulations of continuous casting. Journal de Physique IV, 120, 447-455.
Peer reviewed
ORBi viewed: 77 (15 ULiège) ; downloaded: 145 (6 ULiège) — SCOPUS®: 8 (1 sans les autocitations)
IF 2004: 0.294; latest: -; IF5: - — EigenF 2004: 0.013; latest: - — Article Infl. 2004: 0.2; latest: -
Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463.
Peer reviewed
ORBi viewed: 136 (17 ULiège) ; downloaded: 536 (12 ULiège) — SCOPUS®: -
Castagne, S., Remy, M., & Habraken, A. (2003). Development of a Mesoscopic Cell Modeling the Damage Process in Steel at Elevated Temperature. Key Engineering Materials, 233-236, 145-150.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 46 (6 ULiège) ; downloaded: 58 (4 ULiège) — SCOPUS®: -
IF 2003: 0.284; latest: -; IF5: - — EigenF: — Article Infl.:
Remy, M., Castagne, S., & Habraken, A. (2002). Progress in microscopic modeling of damage in steel at high temperature. International Journal of Forming Processes, 5(N°2-3-4/2002), 445-455.
Peer reviewed
ORBi viewed: 61 (5 ULiège) ; downloaded: 55 (5 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Texture evolution during deep-drawing processes. Journal of Materials Processing Technology, 125-126, 110-118.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 45 (8 ULiège) ; downloaded: 94 (7 ULiège) — SCOPUS®: 9 (2 sans les autocitations)
IF 2002: 0.362; latest: 2.359; IF5: 2.748 — EigenF 2002: 0.017; latest: 0.022 — Article Infl. 2002: 0.2; latest: 0.8
Moureaux, P., Moto Mpong, S., Remy, M., Bouffioux, C., Lecomte-Beckers, J., & Habraken, A. (2002). Identification d'une loi thermo-élasto-viscoplastique en vue de la modélisation du laminage à chaud du cuivre. Journal de Physique IV, 102, 11-361-368.
Peer reviewed
ORBi viewed: 232 (38 ULiège) ; downloaded: 18 (14 ULiège) — SCOPUS®: -
IF 2002: 0.291; latest: -; IF5: - — EigenF: — Article Infl.:
de Montleau, P., & Habraken, A. (2000). An Original integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 29 (4 ULiège) ; downloaded: 3 (3 ULiège) — SCOPUS®: -
IF 2000: 1.266; latest: 2.1; IF5: 2.724 — EigenF 2000: 0.044; latest: 0.026 — Article Infl. 2000: 1.4; latest: 1.3
Habraken, A., & Cescotto, S. (1998). Contact between deformable solids, the fully coupled approach. Mathematical and Computer Modelling, 28(4-8), 153-169.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 43 (13 ULiège) — SCOPUS®: 44 (20 sans les autocitations)
IF 1998: 0.251; latest: 1.366; IF5: 1.602 — EigenF 1998: 0.005; latest: 0.015 — Article Infl. 1998: 0.2; latest: 0.5
Habraken, A., Charles, J.-F., Wegria, J., & Cescotto, S. (1998). Dynamic Recrystallization during Zinc Rolling. International Journal of Forming Processes, 1, 20.
Peer reviewed
ORBi viewed: 150 (14 ULiège) — SCOPUS®: -
Habraken, A., & Bourdouxhe, M. (1992). Coupled thermo-mechanical-metallurgical analysis during the cooling of steel pieces. European Journal of Mechanics. A, Solids, 11(3), 381-402.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 40 (17 ULiège) ; downloaded: 2 (2 ULiège) — SCOPUS®: 19 (7 sans les autocitations)
IF 1992: ?; latest: 2.453; IF5: 2.467 — EigenF 1992: -; latest: 0.007 — Article Infl. 1992: -; latest: 0.8
Zhu, Y. Y., Cescotto, S., & Habraken, A. (1992). A fully coupled elastoplastic damage modeling and fracture criteria in metalforming processes. Journal of Materials Processing Technology, 32, 197-204.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 53 (13 ULiège) — SCOPUS®: 54 (42 sans les autocitations)
IF 1992: ?; latest: 2.359; IF5: 2.748 — EigenF 1992: -; latest: 0.022 — Article Infl. 1992: -; latest: 0.8
Cescotto, S., & Habraken, A. (1991). A note on the response to simple shear of elasto-plastic materials with isotropic hardening. European Journal of Mechanics. A, Solids, 10(1), 1-13.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 27 (6 ULiège) — SCOPUS®: 5 (5 sans les autocitations)
IF 1991: ?; latest: 2.453; IF5: 2.467 — EigenF 1991: -; latest: 0.007 — Article Infl. 1991: -; latest: 0.8
Habraken, A. (1990). An automatic remeshing processor. Journal of Materials Processing Technology, 24, 147-155.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 9 (2 ULiège) — SCOPUS®: 4 (4 sans les autocitations)
IF 1990: ?; latest: 2.359; IF5: 2.748 — EigenF 1990: -; latest: 0.022 — Article Infl. 1990: -; latest: 0.8
Habraken, A., & Cescotto, S. (1990). An automatic remeshing technique for finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30(8), 1503-1525.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 57 (10 ULiège) — SCOPUS®: 67 (51 sans les autocitations)
IF 1990: ?; latest: 2.1; IF5: 2.724 — EigenF 1990: -; latest: 0.026 — Article Infl. 1990: -; latest: 1.3
Charlier, R., & Habraken, A. (1990). Numerical Modelisation of Contact with Friction Phenomena by the Finite Element Method. Computers and Geotechnics, 9(n°1&2), 59-72.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 43 (14 ULiège) ; downloaded: 43 (4 ULiège) — SCOPUS®: -
IF: — EigenF 1990: -; latest: 0.008 — Article Infl. 1990: -; latest: 0.8

En tant que co-auteur

Duflou, J., Habraken, A., Cao, J., Malhotra, R., Bambach, M., Adams, D., Vanhove, H., Mohammadi, A., & Jeswiet, J. (2017, December 30). Single point incremental forming: state-of-the-art and prospects. International Journal of Material Forming.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 67 (11 ULiège) ; downloaded: 61 (9 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
IF 2017: ?; latest: 1.241; IF5: 0.882 — EigenF 2017: ?; latest: 0.002 — Article Infl. 2017: ?; latest: 0.3
Banabic, D., Habraken, A., & Yoon, J. W. (2016). Safe, flexible and efficient sheet metal forming: formability - fracture, incremental sheet forming & rolling. International Journal of Material Forming, 9(3).
Peer reviewed (vérifié par ORBi)
ORBi viewed: 26 (2 ULiège) ; downloaded: 0 — SCOPUS®: 0
IF 2016: ?; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9(3), 259-434.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 72 (45 ULiège) ; downloaded: 157 (21 ULiège) — SCOPUS®: 6 (4 sans les autocitations)
IF 2016: ?; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations International Journal for Computer- Aided Engineering and Software, 33(5), 1388-1421.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 32 (6 ULiège) ; downloaded: 238 (5 ULiège) — SCOPUS®: 4 (2 sans les autocitations)
IF 2016: ?; latest: 0.691; IF5: 0.986 — EigenF: — Article Infl.:
ben bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 33 (9 ULiège) ; downloaded: 57 (10 ULiège) — SCOPUS®: 4 (3 sans les autocitations)
IF 2015: 2.175; latest: 2.175; IF5: 2.169 — EigenF: — Article Infl.:
Tchuindjang, J. T., Neira Torres, I., Fores, P., Habraken, A., & Lecomte-Beckers, J. (2015). Phase Transformations and Crack Initiation in a High-Chromium Cast Steel Under Hot Compression Tests. Journal of Materials Engineering and Performance, 24(5), 2025-2041.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 41 (25 ULiège) ; downloaded: 10 (10 ULiège) — SCOPUS®: 4 (1 sans les autocitations)
IF 2015: 1.094; latest: 1.094; IF5: 1.131 — EigenF 2015: ?; latest: 0.007 — Article Infl. 2015: ?; latest: 0.3
Keller, C., Hug, E., Habraken, A., & Duchene, L. (2015). Effect of stress path on the miniaturization size effect for nickel polycrystals. International Journal of Plasticity, 64, 26-39.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 55 (28 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: 7 (5 sans les autocitations)
IF 2015: 5.623; latest: 5.623; IF5: 6.23 — EigenF 2015: ?; latest: 0.016 — Article Infl. 2015: ?; latest: 1.9
Gilles, G., Habraken, A., & Duchene, L. (2014). Experimental investigation and phenomenological modeling of the quasi-static mechanical behavior of TA6V titanium alloy. Key Engineering Materials, 622-623, 1200-1206.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 49 (16 ULiège) ; downloaded: 10 (8 ULiège) — SCOPUS®: 0
Zhang, L., Habraken, A., Ben Bettaieb, A., & Duchene, L. (2013). Parametric study of metal/polymer multilayer coatings for temperature wrinkling prediction. Journal of Materials Engineering and Performance, 22(9), 2437-2445.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 36 (21 ULiège) ; downloaded: 12 (12 ULiège) — SCOPUS®: 0
IF 2013: 0.981; latest: 1.094; IF5: 1.131 — EigenF 2013: 0.0056; latest: 0.007 — Article Infl. 2013: 0.3125; latest: 0.3
Tirry, W., Bouvier, S., Benmhenni, N., Hammami, W., Habraken, A., Coghe, F., SCHRYVERS, D., & Rabet, L. (2012). Twinning in pure Ti subjected to monotonic simple shear deformation. Materials Characterization, 72(October 2012), 24–36.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 69 (22 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: 21 (20 sans les autocitations)
IF 2012: 1.88; latest: 2.383; IF5: 2.605 — EigenF 2012: 0.012; latest: 0.010 — Article Infl. 2012: 0.7; latest: 0.7
Keller, C., Habraken, A., & Duchene, L. (2012). Finite element investigation of size effects on the mechanical behavior of nickel single crystals. Materials Science and Engineering: A, 550(30), 342-349.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 63 (26 ULiège) ; downloaded: 593 (14 ULiège) — SCOPUS®: 5 (3 sans les autocitations)
IF 2012: 2.108; latest: -; IF5: - — EigenF 2012: 0.084; latest: 0.072 — Article Infl. 2012: 0.7; latest: 0.8
Rah, K., Paepegem, W., Habraken, A., & Degrieck, J. (2012). A mixed solid-shell element for the analysis of laminated composites. International Journal for Numerical Methods in Engineering, 89(7), 805-828.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 70 (13 ULiège) ; downloaded: 65 (6 ULiège) — SCOPUS®: 13 (11 sans les autocitations)
IF 2012: 2.068; latest: 2.1; IF5: 2.724 — EigenF 2012: 0.029; latest: 0.026 — Article Infl. 2012: 1.2; latest: 1.3
Guzmán Inostroza, C. F., Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Habraken, A., & Duchene, L. (2012). Evaluation of the Enhanced Assumed Strain and Assumed Natural Strain in the SSH3D and RESS3 Solid Shell Elements for Single Point Incremental Forming Simulation. Key Engineering Materials, 504-506, 913-918.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 148 (54 ULiège) ; downloaded: 25 (25 ULiège) — SCOPUS®: 2 (1 sans les autocitations)
Keller, C., Hug, E., Habraken, A., & Duchene, L. (2012). Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals. International Journal of Plasticity, 29, 155–172.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 98 (38 ULiège) ; downloaded: 13 (13 ULiège) — SCOPUS®: 32 (23 sans les autocitations)
IF 2012: 4.356; latest: 5.623; IF5: 6.23 — EigenF 2012: 0.014; latest: 0.016 — Article Infl. 2012: 1.7; latest: 1.9
Gilles, G., Cazacu, O., Hammami, W., Habraken, A., & Duchene, L. (2012). Experimental and numerical study of TA-6V mechanical behavior in different monotonic loading conditions at room temperature. Procedia IUTAM, 3, 100-114.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 69 (34 ULiège) ; downloaded: 13 (13 ULiège) — SCOPUS®: 4 (3 sans les autocitations)
Hammami, W., Gilles, G., Habraken, A., & Duchene, L. (2011). Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy. International Journal of Material Forming, 4(2), 205-2015.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 106 (49 ULiège) ; downloaded: 23 (19 ULiège) — SCOPUS®: 9 (8 sans les autocitations)
IF 2011: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials, 43(3), 139-156.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 106 (38 ULiège) ; downloaded: 19 (19 ULiège) — SCOPUS®: 14 (9 sans les autocitations)
IF 2011: 1.769; latest: 2.636; IF5: 2.812 — EigenF 2011: 0.009; latest: 0.008 — Article Infl. 2011: 1.1; latest: 1.0
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming, 4(3), 283-297.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 55 (18 ULiège) ; downloaded: 13 (11 ULiège) — SCOPUS®: 3 (2 sans les autocitations)
IF 2011: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2011). Prediction of the Tension/Compression asymmetry of ECAP processed FCC material using an integrated model based on dislocation and back-stress. Materials Science Forum, 667-669, 961-966.
Peer reviewed
ORBi viewed: 50 (8 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Gilles, G., Hammami, W., Libertiaux, V., Cazacu, O., Yoon, J. H., Habraken, A., & Duchene, L. (2011). Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature. International Journal of Solids and Structures, 48(9), 1277–1289.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 122 (74 ULiège) ; downloaded: 24 (23 ULiège) — SCOPUS®: 45 (23 sans les autocitations)
IF 2011: 1.857; latest: 2.081; IF5: 2.56 — EigenF 2011: 0.034; latest: 0.025 — Article Infl. 2011: 1.0; latest: 1.0
Rah, K., Van Paepegem, W., Habraken, A., & Degrieck, J. (2011). A partial hybrid stress solid-shell element for the analysis of laminated composites. Computer Methods in Applied Mechanics and Engineerinrg, 200(49-52), 3526–3539.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 31 (2 ULiège) ; downloaded: 254 (5 ULiège) — SCOPUS®: 11 (10 sans les autocitations)
IF 2011: 2.651; latest: 3.467; IF5: 3.915 — EigenF 2011: 0.040; latest: 0.033 — Article Infl. 2011: 1.3; latest: 1.6
Eyckens, P., Belkassem, B., Henrard, C., Gu, J., Sol, H., Habraken, A., Duflou, J. R., Van Bael, A., & Van Houtte, P. (2011). Strain Evolution in the Single Point Incremental Forming Process: Digital Image Correlation Measurement and Finite Element Prediction. International Journal of Material Forming, 55-71.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 172 (20 ULiège) ; downloaded: 9 (6 ULiège) — SCOPUS®: 39 (28 sans les autocitations)
IF 2011: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modeling of back-stress evolution in equal-channel angular pressing: from one pass to multiple passes. Journal of Materials Science, 45(17), 4696-4704.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 29 (10 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2010: 1.859; latest: 2.302; IF5: 2.288 — EigenF 2010: 0.053; latest: 0.042 — Article Infl. 2010: 0.6; latest: 0.6
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modelling of back-stress during equal-channel angular pressing. Reviews of advanced materials science, 25(1), 23-31.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 59 (21 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2010: 1.859; latest: 2.302; IF5: 2.288 — EigenF 2010: 0.053; latest: 0.042 — Article Infl. 2010: 0.6; latest: 0.6
Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., Duchene, L., & Ben Bettaieb, M. (2010). Effect of a decrease in sample dimensions on plasticity: application to the micro-forming of nickel. Steel Research International, 81(9), 1173-1177.
Peer reviewed
ORBi viewed: 112 (32 ULiège) ; downloaded: 16 (13 ULiège) — SCOPUS®: -
IF 2010: 0.455; latest: 1.021; IF5: 0.833 — EigenF 2010: 0.004; latest: 0.005 — Article Infl. 2010: 0.2; latest: 0.3
Rah, K., Van Paepegem, W., Habraken, A., Alves de Sousa, R., & Valente, R. A. F. (2009). Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures. International Journal of Material Forming, volume 2(Supplément 1), 943-947.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 30 (5 ULiège) ; downloaded: 3 (3 ULiège) — SCOPUS®: 5 (5 sans les autocitations)
IF 2009: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 173 (44 ULiège) ; downloaded: 461 (29 ULiège) — SCOPUS®: 35 (35 sans les autocitations)
IF 2009: 1.602; latest: 2.162; IF5: 2.252 — EigenF 2009: 0.013; latest: 0.012 — Article Infl. 2009: 0.7; latest: 0.7
Poortmans, S., Duchene, L., Habraken, A., & Verlinden, B. (2009). Modelling compression tests on aluminium produced by equal channel angular extrusion. Acta Materialia.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 76 (13 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: 14 (12 sans les autocitations)
IF 2009: 3.76; latest: 5.058; IF5: 5.149 — EigenF 2009: 0.106; latest: 0.091 — Article Infl. 2009: 1.8; latest: 1.7
de Montleau, P., Habraken, A., & Duchene, L. (2008). A new finite element integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 70 (27 ULiège) ; downloaded: 13 (11 ULiège) — SCOPUS®: 5 (2 sans les autocitations)
IF 2008: 2.229; latest: 2.1; IF5: 2.724 — EigenF 2008: 0.033; latest: 0.026 — Article Infl. 2008: 1.0; latest: 1.3
Poortmans, S., Boubakar, D., Habraken, A., & Verlinden, B. (2007). Correcting tensile test results of ECAE-deformed aluminium. Scripta Materialia, 56(9), 749-752.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 78 (7 ULiège) ; downloaded: 154 (8 ULiège) — SCOPUS®: 8 (7 sans les autocitations)
IF 2007: 2.481; latest: 3.305; IF5: 3.436 — EigenF 2007: 0.059; latest: 0.049 — Article Infl. 2007: 1.1; latest: 1.2
Pietrapertosa, C., Habraken, A., & Jaspart, J.-P. (2005). Modélisation du comportement (clinchage des tôles minces). Techniques de l'ingénieur, 4(BM 7 820), 1-8.
Peer reviewed
ORBi viewed: 100 (13 ULiège) ; downloaded: 1193 (9 ULiège) — SCOPUS®: -
Casotto, S., Pascon, F., Habraken, A., & Bruschi, S. (2005). Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. International Journal of Machine Tools and Manufacture, 45(6), 657-664.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 119 (18 ULiège) ; downloaded: 426 (14 ULiège) — SCOPUS®: 37 (29 sans les autocitations)
IF 2005: 1.057; latest: 3.315; IF5: 4.006 — EigenF 2005: 0.014; latest: 0.009 — Article Infl. 2005: 0.7; latest: 1.0
Henrard, C., Habraken, A., Szekeres, A., Duflou, J., He, S., Van Bael, A., & Van Houtte, P. (2005). Comparison of FEM simulations for the incremental forming process. Advanced Materials Research, 6-8, 533-542.
Peer reviewed
ORBi viewed: 88 (4 ULiège) ; downloaded: 262 (4 ULiège) — SCOPUS®: 16 (11 sans les autocitations)
Jeunechamps, P.-P., Walmag, J., Duysinx, P., Delhez, E., Tossings, P., Habraken, A., & Ponthot, J.-P. (2004). A trust region algorithm for automatic identification of elasto-viscoplastic model parameters in metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 2004.
Peer reviewed
ORBi viewed: 66 (14 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: -
Castagne, S., Habraken, A., & Cescotto, S. (2003). Application of a damage model to an aluminium alloy. International Journal of Damage Mechanics, 12(1), 5-30.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 59 (23 ULiège) ; downloaded: 432 (15 ULiège) — SCOPUS®: 6 (6 sans les autocitations)
IF 2003: 0.486; latest: 1.362; IF5: 1.573 — EigenF 2003: <0.001; latest: 0.002 — Article Infl. 2003: 0.5; latest: 0.5
Drean, M., Habraken, A., Bouchaïr, A., & Muzeau, J.-P. (2002). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. Computers and Structures, 80, 2361-2373.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 48 (2 ULiège) ; downloaded: 117 (2 ULiège) — SCOPUS®: 6 (4 sans les autocitations)
IF 2002: 0.688; latest: 2.425; IF5: 2.745 — EigenF 2002: 0.020; latest: 0.014 — Article Infl. 2002: 0.6; latest: 1.0
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Modélisation des phénomènes thermomécaniques dans une lingotière de coulée continue. Mécanique and Industries, 1, 61-70.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 148 (18 ULiège) ; downloaded: 512 (11 ULiège) — SCOPUS®: 2 (1 sans les autocitations)
Mosbah, P., Shima, S., Habraken, A., & Charlier, R. (1999). Numerical simulation of compacting process of a multi-stepped part – Comparison with experiments. Journal of the Japan Society of Powder and Powder Metallurgy, 46, 696-704.
Peer reviewed
ORBi viewed: 20 (3 ULiège) ; downloaded: 41 (1 ULiège) — SCOPUS®: 11 (7 sans les autocitations)
Drean, M., Habraken, A., Bouchair, A., & Muzeau, J.-P. (1999). Modélisation de la mise en oeuvre des boulons sertis précontraints. Construction Métallique, 4, 21-34.
Peer reviewed
ORBi viewed: 50 (3 ULiège) — SCOPUS®: -
Kaiping, L., Habraken, A., & Bruneel, H. (1995). Simulation of Square Cup Deep Drawing with Different Finite Elements. Journal of Materials Processing Technology, 50(1-4), 81-91.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 50 (9 ULiège) — SCOPUS®: 6 (2 sans les autocitations)
IF 1995: 0.13; latest: 2.359; IF5: 2.748 — EigenF 1995: -; latest: 0.022 — Article Infl. 1995: -; latest: 0.8
Dyduch, M., Habraken, A., & Cescotto, S. (1992). Automatic adaptive remeshing for numerical simulations of metalforming. Computer Methods in Applied Mechanics and Engineering, 101, 283-293.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 15 (3 ULiège) — SCOPUS®: 31 (27 sans les autocitations)
IF 1992: ?; latest: 3.467; IF5: 3.915 — EigenF 1992: -; latest: 0.033 — Article Infl. 1992: -; latest: 1.6

3.b. À portée nationale

En tant que premier ou dernier auteur

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2017). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 62 (30 ULiège) ; downloaded: 85 (24 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
IF 2017: ?; latest: 2.081; IF5: 2.56 — EigenF: — Article Infl.:

4. Articles dans des revues scientifiques sans peer reviewing

4.a. À portée internationale

Yuan, S., Duchene, L., Milis, O., Keller, C., Hug, E., & Habraken, A. (2018, May 28). A Novel Geometry for Shear Test Using Axial Tensile Setup. Proceedings.
ORBi viewed: 35 (7 ULiège) ; downloaded: 12 (4 ULiège)

5. Ouvrages

5.b. En tant qu’éditeur scientifique ou directeur de publication

Van Hemelrijck, D., Aggelis, D., De Belie, N., Delaunois, F., Geernaert, T., Habraken, A., Guillaume, P., Hendrick, P., Reynders, E., Simar, A., & Van Landuit, S. (Eds.). (2018). Procee,ICEM 2018 The 18th International Conference on Experimental Mechanics (ICEM 2018) Brussels, Belgium (Open Access editor). MDPI.
ORBi viewed: 27 (2 ULiège)

6. Chapitres et parties d’ouvrages collectifs

6.a. Chapitres

Duchene, L., & Habraken, A. (2007). Multiscale Approaches. In F., Chinesta & E., Cueto, Advances in Material Forming - Esaform 10 years on (pp. 125-141).
ORBi viewed: 35 (11 ULiège) ; downloaded: 146 (12 ULiège) — SCOPUS®: 0
Habraken, A. (2001). Anisotropic Elastoplastic Model Based on Texture. Lemaitre Handbook of Materials Behavior Models (pp. 204-212). London, United Kingdom: Academic Press.
ORBi viewed: 17 (3 ULiège) ; downloaded: 2 (2 ULiège) — SCOPUS®: -
Habraken, A., Duchene, L., Godinas, A., & Cescotto, S. (2001). Anisotropic elastoplastic model based on texture. Handbook of materials behavior models.
ORBi viewed: 17 (9 ULiège) ; downloaded: 10 (6 ULiège) — SCOPUS®: -
Cescotto, S., Wauters, M., Habraken, A., & Zhu, Y. (2001). A fully coupled anisotropic elasto-plastic-damage model. Handbook of Materials Behavior Models (pp. 802-813). London, United Kingdom: Academic Press.
ORBi viewed: 52 (10 ULiège) ; downloaded: 6 (5 ULiège) — SCOPUS®: -
Dyduch, M., Cescotto, S., & Habraken, A. (1995). Error estimates and indicators for adaptive analysis of bulk forming. In D. R. J., Owen & E., Onate, Computational plasticity. Fundamentals and Applications (pp. 1355-1367). Swansea, U. K: Pineridge Press.
ORBi viewed: 13 (3 ULiège) — SCOPUS®: -

8. Conférences scientifiques dans des universités et centres de recherche

Habraken, A., Pedro, J. O., Toussaint, P., Maas, F., Bouffioux, C., Breunig, S., Kuhlmann, U., Pourostad, V., Rigueiro, C., & Claudio, B. (2017, May 03). Design guidelines for Optimal Use of HSS in Bridges. Paper presented at Workshop OPTIBRI, Stuttgart, Allemagne.
ORBi viewed: 44 (6 ULiège) ; downloaded: 25
Tuninetti, V., Yuan, S., Gilles, G., Guzmán Inostroza, C. F., Habraken, A., & Duchene, L. (2016, September). Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates. Paper presented at NUMISHEET 2016 - The 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Bristol, UK.
ORBi viewed: 94 (21 ULiège) ; downloaded: 49 (12 ULiège) — SCOPUS®: -
Tran, H. S., Brusten, R., Paydas, H., Duchene, L., Tomé Jardin, R. A., Lecomte-Beckers, J., & Habraken, A. (2016, May 20). 3-D finite element analysis of laser cladding process. Application to Ti-6Al-4V. Paper presented at International conference on COmputational methods in Manufacturing Processes (ICOMP’2016), Liege, Belgium.
ORBi viewed: 83 (15 ULiège) ; downloaded: 178 (18 ULiège)
Habraken, A., & Guzmán Inostroza, C. F. (2016, February 09). About the Enhanced Formability of Single Point Incremental Forming. Paper presented at 4 th edition of the CFD and Thermomechanics Days 9 - 11 February 2016 (ARCELORMITTAL Europe and USA), Maizières Lés Metz, France.
ORBi viewed: 83 (12 ULiège) ; downloaded: 156 (7 ULiège)
Neira Torres, I., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2014, February 05). A FEM approach to study phase transformation within bimetallic rolls. Paper presented at CFD and Thermomechanics days 2014, Maizières-lès-metz, France.
ORBi viewed: 24 (4 ULiège) ; downloaded: 32 (3 ULiège) — SCOPUS®: -
Guzmán Inostroza, C. F., Mouton, T., & Habraken, A. (2013, September 11). Using Gmsh as a mesh generator and post-processor for LAGAMINE. Paper presented at First International Workshop on the Finite Element Code LAGAMINE (LAGASHOP 2013), Liège, Belgium.
ORBi viewed: 67 (16 ULiège) ; downloaded: 1650 (24 ULiège) — SCOPUS®: -
Guzmán Inostroza, C. F., Sena, J. I., Duchene, L., & Habraken, A. (2013, September 11). Accurate Single Point Incremental Forming Simulations using Solid-Shell Elements. Paper presented at First International Workshop on the Finite Element Code LAGAMINE (LAGASHOP 2013), Liège, Belgium.
ORBi viewed: 74 (21 ULiège) ; downloaded: 72 (10 ULiège) — SCOPUS®: -
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Alves de Sousa, R. J., & Angelo Valente, R. (2013, September 11). Adaptive remeshing technique for the single incremental forming simulations using solid-shell elements. Paper presented at First International Workshop on the Finite Element Code LAGAMINE.
ORBi viewed: 70 (30 ULiège) ; downloaded: 88 (12 ULiège) — SCOPUS®: -
Neira Torres, I., Lecomte-Beckers, J., Tchuindjang, J. T., Habraken, A., & Gilles, G. (2013, September 10). Study of phase transformations within bimetallic rolling mills. Paper presented at First International Workshop Lagashop 2013, Liége, Belgium.
ORBi viewed: 139 (44 ULiège) ; downloaded: 182 (6 ULiège) — SCOPUS®: -

9. Colloques et congrès scientifiques

9.a. Sur invitation

À portée internationale

Hashemi, N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Lecomte-Beckers, J., Carrus, R., Habraken, A., & Mertens, A. (2018, July 12). High Temperature Wear Behaviour of High Speed Steel Thick Deposits Obtained by Laser Cladding. Paper presented at Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France.
ORBi viewed: 42 (9 ULiège) ; downloaded: 1 (1 ULiège)
Tomé Jardin, R. A., Tran, H. S., Hashemi, N., Tchuindjang, J. T., Carrus, R., Mertens, A., & Habraken, A. (2018, July 12). Modelling the Laser Cladding Process of M4 High Speed Steel. Paper presented at International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Paris, France.
Peer reviewed
ORBi viewed: 45 (6 ULiège) ; downloaded: 3 (3 ULiège)
Delahaye, J., Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (2018, July). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties. Paper presented at THERMEC’2018 - INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, Paris.
ORBi viewed: 28 (10 ULiège) ; downloaded: 2 (2 ULiège)
Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (2018, January 04). Laser Clad High Speed Steel thick deposits: Correlations between the local thermal history, the microstructures and the wear mechanisms. Paper presented at International Conference on Plasticity, Damage and Fracture 2018, San Juan, PR.
ORBi viewed: 128 (23 ULiège) ; downloaded: 10 (7 ULiège)
Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017, May 03). OPTIBRI Opening and Project Overview. Paper presented at Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.
Peer reviewed
ORBi viewed: 34 (7 ULiège) ; downloaded: 30 (5 ULiège)
Tran, H. S., Tchuindjang, J. T., Hakan, P., Jardin, R., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. Extended Abstract book of 14th Conf. on Computer Methods in Materials Technology KomPlasTech 2017.
ORBi viewed: 70 (23 ULiège) ; downloaded: 10 (10 ULiège)
Tran, H. S., Brusten, R., Jardin, R., Paydas, H., Carrus, R., Duchene, L., Lecomte-Beckers, J., & Habraken, A. (2016, November 03). Laser Cladding Finite Element Modelling Application to Ti6Al4V. Paper presented at IAP INTEMATE Plenary session meeting, Gent, Belgique.
ORBi viewed: 55 (16 ULiège)
Tran, H. S., Duchene, L., Tummala, H., Peron Luhrs, V., Fivel, M., & Habraken, A. (2016, September 07). Quasicontinuum analysis of interaction between screw dislocation and coherent twin boundary. Paper presented at 15th European Mechanics of Materials Conference, Brussels, Belgium.
ORBi viewed: 50 (8 ULiège) ; downloaded: 43 (4 ULiège)
Habraken, A. (2016, September 06). Single Point Incremental Forming to increase material knowledge and production flexibility. Paper presented at 10th Int. Conf. and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes Numisheet 2016, Bristol, United Kingdom.
Peer reviewed
ORBi viewed: 25 (11 ULiège) ; downloaded: 7 (7 ULiège)
Jardin, R., Hoang, S. T., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016). 2D and 3D FE models of laser cladding process. Booklet of the conference with extended abstract and short paper of less than 6 pages.
Peer reviewed
ORBi viewed: 62 (30 ULiège)
Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Carrus, R., Habraken, A., & Lecomte-Beckers, J. (2016, February 09). Local thermal history during the laser additive manufacturing of steel. Paper presented at 4th CFD and Thermomechanics Days, Maizières, France.
ORBi viewed: 194 (35 ULiège) ; downloaded: 18 (10 ULiège) — SCOPUS®: -
Hoang, S. T., Tummala, H., Duchene, L., Péron Luhrs, V., Fivel, M., & Habraken, A. (2015). Interaction between dislocation and coherent twin boundary by quasicontinuum model. Proceedings of XIII International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS ebook open accesss XIII.
Peer reviewed
ORBi viewed: 25 (5 ULiège) — SCOPUS®: 0
Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Determination of Stress and Strain Fields in Cast and Heat Treated Bimetallic Rolling Mill Rolls. Proceedings of the Iron & Steel Technology Conference and Exposition (AISTech 2015 & ICSTI) (pp. 2706-2716). Cleveland, Ohio, USA.
Peer reviewed
ORBi viewed: 112 (17 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 0
Gilles, G., Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Modelling of stress field evolution in bimetallic rolling mill rolls during the manufacturing process. Proceedings of the 5th Conference on rolling mill rolls for metals processing Rolls 5 2015.
ORBi viewed: 33 (1 ULiège) ; downloaded: 1 (1 ULiège) — SCOPUS®: -
Tchuindjang, J. T., Neira Torres, I., Habraken, A., Sinnaeve, M., & Lecomte-Beckers, J. (2014). Characterization of the Solidification Path, the Solid State Transformations and the Mechanical Behavior of a High Chromium Cast Steel. In T., Nylen (Other coll.), Proceedings of the 5th Abrasion Conference - 2014.
ORBi viewed: 49 (13 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: -
Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. Incremental sheet forming.
Peer reviewed
ORBi viewed: 67 (28 ULiège) ; downloaded: 41 (10 ULiège) — SCOPUS®: -
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. Incremental sheet forming.
Peer reviewed
ORBi viewed: 69 (26 ULiège) ; downloaded: 107 (18 ULiège) — SCOPUS®: -
Habraken, A., & Collin, F. (2013). Finite element formulation and couplings. Paper presented at First International Workshop on the Finite Element COde LAGAMINE, Liège, Belgique.
Peer reviewed
ORBi viewed: 18 (3 ULiège) ; downloaded: 56 (8 ULiège) — SCOPUS®: -
Mathonet, V., Degée, H., Habraken, A., Tossings, P., & Delhez, E. (2004). Structural optimisation of steel frames for industrial applications. Proceedings of the Inverse Problems Design and Optimization Symposium.
Peer reviewed
ORBi viewed: 134 (19 ULiège) ; downloaded: 121 (12 ULiège) — SCOPUS®: -

À portée nationale

Delahaye, J., Rigo, O., Lecomte-Beckers, J., Habraken, A., Mertens, A., & Delahaye, J. (2017, June 28). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgique.
ORBi viewed: 94 (17 ULiège)
Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Carrus, R., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (2017, June 28). Wear behaviour of laser clad High Speed Steels thick deposits. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgique.
ORBi viewed: 64 (23 ULiège) ; downloaded: 4 (4 ULiège)
Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2013, June 27). Single Point Incremental Forming using Adaptive Remeshing Technique with Solid-Shell Finite Elements. Paper presented at Cogress on Numerical Methods in Engineering CNME, Bilbao, Spain.
Peer reviewed
ORBi viewed: 27 (17 ULiège) ; downloaded: 59 (14 ULiège) — SCOPUS®: -

9.b. Sur proposition personnelle

Publiées

À portée internationale
Avec peer reviewing
Morch, H., Duchene, L., & Habraken, A. (2018). Identification method of an advanced constitutive law for nickel-based alloy Haynes 230 used in solar receivers. Journal of Physics. Conference Series, 1063.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 27 (8 ULiège) ; downloaded: 3 (1 ULiège) — SCOPUS®: 0
Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. Proceedings of the XIV International Conference on Computational Plasticity.
Peer reviewed
ORBi viewed: 50 (14 ULiège) ; downloaded: 191 (5 ULiège) — SCOPUS®: 0
Flipon, B., Lawrjaniec, D., Papeleux, L., Ponthot, J.-P., & Habraken, A. (2016). Numerical Simulations of a Two Roll Round Bar Straightener. AIP Conference Proceedings 1769, 120001 (2016) (pp. 6).
Peer reviewed
ORBi viewed: 33 (1 ULiège) ; downloaded: 1 (1 ULiège) — SCOPUS®: 0
Guzmán Inostroza, C. F., Tuninetti, V., Gilles, G., & Habraken, A. (2015). Assessment of damage and anisotropic plasticity models to predict Ti-6Al-4V behavior. Key Engineering Materials, 651-653, 575-580.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 89 (12 ULiège) ; downloaded: 489 (13 ULiège) — SCOPUS®: 3 (3 sans les autocitations)
Lemoine, X., Tudor, B., & Habraken, A. (2014, October). Numerical investigation of cut-edge effect using the Gurson-Tvergaard-Needleman model. Procedia Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 68 (16 ULiège) ; downloaded: 5 (4 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
marandi, K., vayrette, R., Pardoen, T., Duchene, L., & Habraken, A. (2013). Bauschinger effect in thin metallic films by Fem simulations. XII International Conference on Computational Plasticity. Fundamentals and Application COMPLAS XII , Barcelone 3-5 septembre 2013.
Peer reviewed
ORBi viewed: 78 (9 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
Duchene, L., Ben Bettaieb, A., Tuninetti Vásquez, V., & Habraken, A. (2013). Numerical modeling and digital image correlation strain measurements of coated metal sheets submitted to large bending deformation. Proceedings of the 16th ESAFORM conference on Material Forming.
Peer reviewed
ORBi viewed: 119 (49 ULiège) ; downloaded: 113 (33 ULiège) — SCOPUS®: -
Tuninetti Vásquez, V., Gilles, G., Milis, O., Neira Torres, I., & Habraken, A. (2013). QUASI-STATIC MECHANICAL BEHAVIOUR OF TI-6AL-4V ALLOY AT ROOM TEMPERATURE. Complas XII, XII, 51-62.
Peer reviewed
ORBi viewed: 182 (47 ULiège) ; downloaded: 181 (24 ULiège) — SCOPUS®: 2 (1 sans les autocitations)
Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., Sinnaeve, M., & Habraken, A. (2013). Prediction of residual stresses by FE simulations on bimetallic work rolls during cooling. Computer Methods in Materials Science, 13(1), 84-91.
Peer reviewed
ORBi viewed: 343 (84 ULiège) ; downloaded: 22 (17 ULiège) — SCOPUS®: -
Gilles, G., Habraken, A., Cazacu, O., Balan, T., & Duchene, L. (2013). Experimental and numerical study of TA6V mechanical behavior under different quasi-static strain paths at room temperature. AIP Conference Proceedings, 1532, 651-656.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 63 (17 ULiège) ; downloaded: 9 (9 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Tuninetti Vásquez, V., Gilles, G., Péron-Lührs, V., & Habraken, A. (2012). Compression test for metal characterization using digital image correlation and inverse modeling. Procedia IUTAM.
Peer reviewed
ORBi viewed: 200 (60 ULiège) ; downloaded: 77 (26 ULiège) — SCOPUS®: 4 (1 sans les autocitations)
Duchene, L., Ben Bettaieb, A., & Habraken, A. (2011). Assessment of the enhanced assumed strain (EAS) and the assumed natural strain (ANS) techniques in the mechanical behavior of the SSH3D solid-shell element. Complas XI.
Peer reviewed
ORBi viewed: 90 (33 ULiège) ; downloaded: 15 (12 ULiège) — SCOPUS®: 4 (0 sans les autocitations)
Ben Bettaieb, A., Duchene, L., Zhang, L., & Habraken, A. (2011). New Solid-Shell Finite Element Based on EAS and ANS Concepts for Sheet Metal Forming. AIP Conference Proceedings, 1383, 374-381.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 125 (26 ULiège) ; downloaded: 13 (11 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Gilles, G., Tuninetti Vásquez, V., Ben Bettaieb, M., Cazacu, O., Habraken, A., & Duchene, L. (2011). Experimental characterization and constitutive modeling of TA6V mechanical behavior in plane strain state at room temperature. AIP Conference Proceedings, 1383.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 93 (43 ULiège) ; downloaded: 17 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 96 (36 ULiège) ; downloaded: 120 (13 ULiège) — SCOPUS®: 0
Lequesne, C., Pensis, O., Renard, M., Vanderheyden, S., & Habraken, A. (2011). Roller Pressure Quench Process of Steel Plate Modelling. Proceedings of Esaform 2011.
Peer reviewed
ORBi viewed: 94 (15 ULiège) ; downloaded: 11 (6 ULiège) — SCOPUS®: -
Hammami, W., Tirry, W., Coghe, F., Duchene, L., Delannay, L., & Habraken, A. (2011). Ti6A14V Anisotropy and Texture Evolution Predictions Using Multisite and Self Consistent Crystal Plasticity Models. Proceedings of the 12th World conference on Titanium (pp. 950-953).
Peer reviewed
ORBi viewed: 100 (36 ULiège) ; downloaded: 9 (8 ULiège) — SCOPUS®: -
Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the Efficiency of the Ti555 Compared with TA6V Alloy in the Case of an Aeronautic Application. Proceedings of the 12th World Conference on Titanium (pp. 1969-1973).
Peer reviewed
ORBi viewed: 48 (7 ULiège) — SCOPUS®: -
Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the efficiency of the Ti555 compared with TA6V alloy in the case of an aeronautic application. The 12th World Conference on Titanium Ti-2011.
Peer reviewed
ORBi viewed: 41 (11 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: -
Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (2010). Modeling the vertical spincasting of large bimetallic rolling mill rolls. Key Engineering Materials, 443, 15-20.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 79 (22 ULiège) ; downloaded: 11 (8 ULiège) — SCOPUS®: 0
Zhang, L., Ben Bettaieb, A., Habraken, A., & Duchene, L. (2010). Temperature wrinkling prediction in metal/polymer multilayer coatings. International Journal of Material Forming, 3(supplement 1), 559-562.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 135 (41 ULiège) ; downloaded: 15 (14 ULiège) — SCOPUS®: 3 (1 sans les autocitations)
IF 2010: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Marmi, A., Habraken, A., & Duchene, L. (2010). Multiaxial fatigue damage modeling of Ti6Al4V alloy. Proceedings of the ICMFF9 Conference.
Peer reviewed
ORBi viewed: 151 (25 ULiège) ; downloaded: 13 (12 ULiège) — SCOPUS®: -
Gilles, G., Habraken, A., & Duchene, L. (2010). Material parameter identification of Cazacu's model for Ti6Al4V using the simulated annealing algorithm. Materials Science Forum, 636-637, 1125-1130.
Peer reviewed
ORBi viewed: 114 (40 ULiège) ; downloaded: 10 (10 ULiège) — SCOPUS®: 4 (4 sans les autocitations)
Keller, C., Habraken, A., Hug, E., & Duchene, L. (2010). Miniaturization induced size effects: Experimental and numerical investigation of size effects linked to the miniaturization of metallic components. Scale transition for plastic crystalline and microstructured materials: from experiment to numerical modeling.
Peer reviewed
ORBi viewed: 83 (17 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: -
Keller, C., Afteni, M., Banu, M., & Habraken, A. (2010). Influence of Surface Effect on Nickel Micro Deep Drawing Process. NUMIFORM 2010, VOLS 1 AND 2 (pp. 1025-1030).
Peer reviewed
ORBi viewed: 47 (13 ULiège) — SCOPUS®: -
Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. Proceedings of the Advances in Materials and Processing Technologies Conference.
Peer reviewed
ORBi viewed: 118 (24 ULiège) ; downloaded: 11 (10 ULiège) — SCOPUS®: -
Bouffioux, C., Pouteau, P., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Material data identification to model the single point incremental forming process. International Journal of Material Forming, 3(Suppl. 1), 979-982.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 138 (39 ULiège) ; downloaded: 20 (13 ULiège) — SCOPUS®: 14 (9 sans les autocitations)
IF 2010: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Van Hoof, T., Ben Bettaieb, M., Lani, F., Dufour, P., Jacques, P., Lenain, A., & Habraken, A. (2010). Comparison of mechanical efficiency of two microstructures of Ti5553 alloy in the case of bolted flanges submitted to tensile loading. Steel Research International, 81(9), 1148-1152.
Peer reviewed
ORBi viewed: 115 (17 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: -
IF 2010: 0.455; latest: 1.021; IF5: 0.833 — EigenF 2010: 0.004; latest: 0.005 — Article Infl. 2010: 0.2; latest: 0.3
Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., & Duchene, L. (2010). Influence of Surface Effect On Nickel Micro Deep Drawing Process. Proceeding of the Numiform 2010 conference (pp. 1025-1030). American Institute of Physics.
Peer reviewed
ORBi viewed: 64 (18 ULiège) ; downloaded: 18 (10 ULiège) — SCOPUS®: -
Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 150 (39 ULiège) ; downloaded: 86 (18 ULiège) — SCOPUS®: 0
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). The Role of Void Evolution on the bendability of Steel Sheets. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 144 (24 ULiège) ; downloaded: 87 (16 ULiège) — SCOPUS®: 0
Hammami, W., Bouvier, S., Duchene, L., Delannay, L., & Habraken, A. (2009). Crystal Plasticity Modelling of Monotonic Shear Tests on Pure Titanium. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 100 (30 ULiège) ; downloaded: 128 (13 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2(Supplément 1), 65 - 68.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 227 (47 ULiège) ; downloaded: 121 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2009: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
El Bartali, A., Zhang, L., Studer, L., & Habraken, A. (2009). Validation d'un calcul thermique métallurgique. In B., Appolaire, S., Arbab Chirani, S., Calloch, S., Denis, M., Leal, & M., Tailleur (Eds.), Mécanique et mécanismes des changements de phases (pp. 254 - 258).
Peer reviewed
ORBi viewed: 179 (35 ULiège) ; downloaded: 16 (9 ULiège) — SCOPUS®: -
Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (2009). Modeling the Vertical Spincasting of Large Bimetallic Rolling Mill Rolls. In J., Ambrosio (Ed.), Proceedings of the 7th EUROMECH Solid Mechanics Conference.
Peer reviewed
ORBi viewed: 67 (14 ULiège) ; downloaded: 5 (3 ULiège) — SCOPUS®: -
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). Study of the formability of steels. Proceedings of the International ESAFORM Conference 2009.
Peer reviewed
ORBi viewed: 97 (29 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: -
Habraken, A., Gerday, A.-F., & Duchene, L. (2008). Multiscale finite element study of Ti-555. In Akhtar S. Khan, Babak Farrokh, M., Baig, A., Pandey, C., Meredith, S., Yu, & H., Liu (Eds.), Proceedings of the 14th International Symposium on Plasticity & Its Current Applications, Mechanics & Mechanisms of Finite Plastic Deformation (pp. 265-267). Neat Press.
Peer reviewed
ORBi viewed: 37 (10 ULiège) ; downloaded: 74 (8 ULiège) — SCOPUS®: -
Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H., Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH.
Peer reviewed
ORBi viewed: 235 (25 ULiège) ; downloaded: 216 (17 ULiège) — SCOPUS®: -
Studer, L., Detrembleur, S., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2008). Modelling the vertical spincasting of large bimettalic rolling mill rolls. Proceedings of the Second International Conference on Advances in Solidification Processes (ICASP-2).
Peer reviewed
ORBi viewed: 57 (13 ULiège) ; downloaded: 156 (9 ULiège) — SCOPUS®: -
Verbert, J., Belkassem, B., Henrard, C., Habraken, A., Gu, J., Sol, H., & Duflou, J. R. (2008). Multi-Step toolpath approach to overcome forming limitations in single point incremental forming. In P., Boisse, Proceedings of the 11th International ESAFORM Conference on Material Forming (pp. 587-590). Springer.
Peer reviewed
ORBi viewed: 79 (6 ULiège) ; downloaded: 252 (5 ULiège) — SCOPUS®: 34 (32 sans les autocitations)
Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N., Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144).
Peer reviewed
ORBi viewed: 150 (20 ULiège) ; downloaded: 152 (13 ULiège) — SCOPUS®: -
Bouffioux, C., Eyckens, P., Henrard, C., Aerens, R., Van Bael, A., Sol, H., & Habraken, A. (2008). Identification of material parameters to predict Single Point Incremental Forming forces. International Journal of Material Forming.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 76 (20 ULiège) ; downloaded: 11 (10 ULiège) — SCOPUS®: 26 (19 sans les autocitations)
IF 2008: -; latest: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Duchene, L., Geers, M. G. D., Brekelmans, W. A. M., Chen, E., Verlinden, B., & Habraken, A. (2008). Multiscale modeling of equal channel angular extruded aluminium with strain gradient crystal plasticity and phenomenological models. In A., Rollett (Ed.), Proceedings of the 15th International Conference on the Texture of Materials (ICOTOM-15).
Peer reviewed
ORBi viewed: 85 (6 ULiège) ; downloaded: 83 (4 ULiège) — SCOPUS®: -
Rossi, B., Habraken, A., & Pascon, F. (2007). On the evaluation of the through thickness residual stresses distribution of cold formed profiles. 10th International ESAFORM Conference on Material Forming : ESAFORM, Zaragoza, 18-20 April 2007 (pp. 570-577).
Peer reviewed
ORBi viewed: 100 (30 ULiège) ; downloaded: 371 (10 ULiège) — SCOPUS®: -
Lelotte, T., Rossi, B., & Habraken, A. (2007). Micro and macro investigation on the hardening of a titanium alloy. 11th World conference on titanium: Ti 2007, Kyoto 3-7 June 2007 (pp. 415-419).
Peer reviewed
ORBi viewed: 80 (35 ULiège) — SCOPUS®: -
Studer, L., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2007). Modelling the vertical centrifugal casting of large bimetallic rolling mills. In E., Onate, M., Papadrakis, & B., Schrefler (Eds.), Proceedings of the Conference of Computational Methods for Coupled Problems in Science and Engineering 2 (pp. 141-144). Barcelona, Spain: CIMNE.
Peer reviewed
ORBi viewed: 114 (11 ULiège) ; downloaded: 93 (7 ULiège) — SCOPUS®: -
Habraken, A., Gerday, A.-F., Diouf, B., & Duchene, L. (2007). Comparisons of FEM approaches modelling the metal plastic behaviour. In E., Cueto & F., Chinesta, Proceedings of the 10th ESAFORM Conference on Material Forming (pp. 1478-1483). Springer.
Peer reviewed
ORBi viewed: 48 (20 ULiège) ; downloaded: 67 (13 ULiège) — SCOPUS®: -
Bouvier, S., Alves, L., & Habraken, A. (2007). Strategy of material parameters identification for non linear mechanical behavior: sensitivity of FE computation. In E., Cueto & C., Francisco, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 94-99).
Peer reviewed
ORBi viewed: 69 (5 ULiège) ; downloaded: 138 (3 ULiège) — SCOPUS®: -
Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M., Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference.
Peer reviewed
ORBi viewed: 92 (12 ULiège) ; downloaded: 87 (10 ULiège) — SCOPUS®: -
Duchene, L., Diouf, B., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2007). Study of axes rotation during simple shear tests on aluminium sheets. In J. M. A., César de Sa & A. D., Santos (Eds.), Proceedings of the 9th International Conference NUMIFORM 2007 (AIP Conference Proceedings 908, pp. 399-404).
Peer reviewed
ORBi viewed: 22 (3 ULiège) ; downloaded: 54 (3 ULiège) — SCOPUS®: -
Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2007). Inverse modelling of nanoindentation tests to identify Ti-555 behaviour. Proceedings of the 11th world conference on titanium. Japan Institute of Metals.
Peer reviewed
ORBi viewed: 107 (14 ULiège) ; downloaded: 186 (14 ULiège) — SCOPUS®: -
Van Bael, A., Eyckens, P., He, S., Bouffioux, C., Henrard, C., Habraken, A., Duflou, J., & Van Houtte, P. (2007). Forming limit predictions for single-point incremental sheet metal forming. In E., Cueto & F., Chinesta, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 309-314). Springer.
Peer reviewed
ORBi viewed: 87 (7 ULiège) ; downloaded: 477 (2 ULiège) — SCOPUS®: -
Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D., Santos & A., Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).
Peer reviewed
ORBi viewed: 456 (32 ULiège) ; downloaded: 1072 (23 ULiège)
Lequesne, C., Plumier, A., Degée, H., & Habraken, A. (2006). Numerical study of the fatigue crack in welded beam-to-column connection using cohesive zone model. Proceedings of the International Conference on Fracture and Damage Mechanics V (pp. 847-850). Uetikon-Zuerich, Switzerland: Trans Tech Publications.
Peer reviewed
ORBi viewed: 71 (16 ULiège) ; downloaded: 108 (9 ULiège) — SCOPUS®: -
Lelotte, T., Duchene, L., & Habraken, A. (2006). Fast method to predict an earing profile based on Lankford coefficients and yield locus. In C. A., Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dodrecht, Pays-Bas: Springer.
Peer reviewed
ORBi viewed: 76 (7 ULiège) ; downloaded: 96 (6 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., & Habraken, A. (2006). Development and performance assessment of an improved 8-node mixed type FEM element. In N., Juster & A., Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 135-138). Krakow, Poland: Akapit.
Peer reviewed
ORBi viewed: 56 (13 ULiège) ; downloaded: 96 (8 ULiège) — SCOPUS®: -
Lelotte, T., Delannay, L., & Habraken, A. (2006). Prediction of deformation textures in zirconium based on a simplified modelling of grain interaction. In A. S., Khan (Ed.), Proceedings of the Plasticity Conference 2006. NEAT Press.
Peer reviewed
ORBi viewed: 23 (1 ULiège) ; downloaded: 232 (2 ULiège) — SCOPUS®: -
Rosso, V., Zhang, L., Michel, F., Renotte, Y., Lion, Y., & Habraken, A. (2006). Out-of-plane displacement derivative measurement: comparison of results obtained by a shearographic interferometer using the separation of the polarization states and the finite element method. In P., Mathieu (Ed.), Proceedings of Photonics North Conference 2006.
Peer reviewed
ORBi viewed: 81 (16 ULiège) ; downloaded: 511 (14 ULiège) — SCOPUS®: -
Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Comparison between homogeneous and heterogeneous field information for plastic material identification. In M., Grédiac & J., Huntley (Eds.), Proceedings of Photomecanics Conference 2006 (pp. 71-72).
Peer reviewed
ORBi viewed: 69 (1 ULiège) ; downloaded: 44 (1 ULiège) — SCOPUS®: -
Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Analysis of speckle patterns for deformation measurements by DIC. In P., Slangen & C., Cerruti (Eds.), Proceedings of SPIE Vol. 6341 (pp. 1-E6).
Peer reviewed
ORBi viewed: 234 (8 ULiège) ; downloaded: 351 (7 ULiège) — SCOPUS®: -
Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2006). Finite element simulations of nanoindentation in beta metastable Ti alloys. In N., Juster & A., Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 187-190). Krakow, Poland: Akapit.
Peer reviewed
ORBi viewed: 108 (18 ULiège) ; downloaded: 141 (7 ULiège) — SCOPUS®: -
Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., & Habraken, A. (2006). Identification of hardening behavior using inverse modeling and image correlation. Proceedings of the SEM annual conference and exposition 2006.
Peer reviewed
ORBi viewed: 39 (3 ULiège) ; downloaded: 102 (1 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Diouf, B., El Houdaigui, F., Poortmans, S., Verlinden, B., & Habraken, A. (2006). A phenomenological model to simulate mechanical tests on ultrafine-grained aluminium produced by ECAE. In C. A., Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dordrecht, Pays-Bas: Springer.
Peer reviewed
ORBi viewed: 33 (6 ULiège) ; downloaded: 82 (4 ULiège) — SCOPUS®: -
Poortmans, S., El Houdaigui, F., Habraken, A., & Verlinden, B. (2006). Inhomogeneous and anisotropic deformation behavior and strain hardening of ultrafine-grained aluminium by ECAP. In Y. T., Zhu, T. G., Langdon, Z., Horita, M. J., Zehetbauer, S. L., Semiatin, & T. C., Lowe (Eds.), Proceedings of the Ultrafine Grained Materials IV Conference (pp. 389-394). London, United Kingdom: Academic Press.
Peer reviewed
ORBi viewed: 118 (2 ULiège) ; downloaded: 129 (2 ULiège) — SCOPUS®: 0
Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., Rabet, L., & Habraken, A. (2006). Identification of yield locus parameters of metals using inverse modeling and full field DIC. Proceedings of the 7th national congress on theoretical and applied mechanics.
Peer reviewed
ORBi viewed: 61 (3 ULiège) ; downloaded: 136 (2 ULiège) — SCOPUS®: -
Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 102 (8 ULiège) ; downloaded: 121 (6 ULiège) — SCOPUS®: -
Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D., Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Roumanie: The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 80 (7 ULiège) ; downloaded: 71 (3 ULiège) — SCOPUS®: -
Pascon, F., Pecquet, E., Zhang, L., & Habraken, A. (2005). Modelling of semi-continuous casting of cupro-nickel alloys. In M., Papadrakakis, E., Onate, & B., Schrefler (Eds.), Proceedings of the International Conference on Computational Methods for Coupled Problems in Science and Engineering.
Peer reviewed
ORBi viewed: 100 (14 ULiège) ; downloaded: 371 (5 ULiège) — SCOPUS®: -
Castagne, S., & Habraken, A. (2005). Identification of the parameters of a damage constitutive law for steel at elevated temperature. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 29-32). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 43 (1 ULiège) ; downloaded: 55 (2 ULiège) — SCOPUS®: -
Lequesne, C., Gerday, A.-F., Plumier, A., & Habraken, A. (2005). Modeling of the fatigue cracks in welded beam-to-column connection of steel moment frame buildings submitted to earthquake. In M. H., Aliabadi, J., Planas, F.-G., Buchholz, B., Abersek, J., Alfaiate, & S. I., Nishida (Eds.), Proceedings of the 4th International Conference on Fracture and Damage Mechanics (pp. 233-238). Eastleigh, United Kingdom.
Peer reviewed
ORBi viewed: 96 (15 ULiège) ; downloaded: 208 (9 ULiège) — SCOPUS®: -
Lequesne, C., Plumier, A., & Habraken, A. (2005). Modélisation de la fissuration par fatigue des connexions poutres-colonnes de grands bâtiments en armature en acier lors de tremblements de terre. Proceedings of the XVIIème congrès français de mécanique (CFM 2005).
Peer reviewed
ORBi viewed: 147 (10 ULiège) ; downloaded: 341 (7 ULiège) — SCOPUS®: -
Duchene, L., El Houdaigui, F., & Habraken, A. (2005). Finite element simulations of the swift effect. In P. F., Bariani (Ed.), Proceedings of the ICTP 2005 International Conference on Technology of Plasticity.
Peer reviewed
ORBi viewed: 66 (4 ULiège) ; downloaded: 114 (3 ULiège) — SCOPUS®: -
Flores, P., Moureaux, P., & Habraken, A. (2005). Material Identification Using a Bi-Axial Test Machine. Proceedings of the International Conference on Advances in Experimental Mechanics.
Peer reviewed
ORBi viewed: 59 (7 ULiège) ; downloaded: 170 (10 ULiège) — SCOPUS®: -
Casotto, S., Bruschi, S., Pascon, F., & Habraken, A. (2005). Development of a neural network to predict the final geometry of forged rings after cooling. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 2) (pp. 855-858). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 46 (7 ULiège) ; downloaded: 77 (7 ULiège) — SCOPUS®: -
Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2005). Identification of elastic orthotropic material parameters by inverse modeling using ESPI. Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental and Applied Mechanics.
Peer reviewed
ORBi viewed: 92 (3 ULiège) ; downloaded: 472 (1 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., El Houdaigui, F., Bouvier, S., & Habraken, A. (2005). Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element. In L. M., Smith, F., Pourboghrat, J. W., Yoon, & T. B., Stoughton (Eds.), On the Cutting Edge of Technology, NUMISHEET 2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Conference proceedings, Vol 778, pp. 409-414). Melville (New York), USA: American Institue of Physics (AIP).
Peer reviewed
ORBi viewed: 64 (7 ULiège) ; downloaded: 168 (5 ULiège) — SCOPUS®: -
El Houdaigui, F., Duchene, L., Habraken, A., Poortmans, S., & Verlinden, B. (2005). Anisotropic yield locus of ultrafine-grained aluminium produced by Equal Channel angular extrusion. In E., Onate & D. R. J., Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII) (pp. 1170-1173).
Peer reviewed
ORBi viewed: 132 (19 ULiège) ; downloaded: 60 (4 ULiège) — SCOPUS®: 0
Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M., Smith, F., Pourboghrat, J. W., Yoon, & T. B., Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), USA: American Institute of Physics (AIP).
Peer reviewed
ORBi viewed: 156 (10 ULiège) ; downloaded: 169 (5 ULiège) — SCOPUS®: -
Lelotte, T., Gerday, A.-F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A., & Duchene, L. (2005). Axes rotation during simple shear test: Measurement and predictions. In E., Oñate & D. R. J., Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII).
Peer reviewed
ORBi viewed: 73 (21 ULiège) ; downloaded: 47 (5 ULiège) — SCOPUS®: 0
He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., Henrard, C., Bouffioux, C., & Habraken, A. (2005). Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 711-714). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 232 (11 ULiège) ; downloaded: 391 (4 ULiège) — SCOPUS®: -
Watzeels, K., Tunckol, Y., Henrard, C., Gu, J., Sol, H., Duflou, J., & Habraken, A. (2005). Experimental validation of the finite element simulation of the first stroke in single point incremental forming. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 703-706). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 90 (6 ULiège) ; downloaded: 94 (3 ULiège) — SCOPUS®: -
Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S., Gosh, J. M., Castro, & J. K., Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings.
Peer reviewed
ORBi viewed: 84 (8 ULiège) ; downloaded: 165 (6 ULiège) — SCOPUS®: -
Duchene, L., Delannay, L., & Habraken, A. (2004). Finite element prediction of the swift effect based on Taylor-type polycrystal plasticity models. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 171-174). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 42 (4 ULiège) ; downloaded: 82 (3 ULiège) — SCOPUS®: -
Pecquet, E., Volles, R., Lecomte-Beckers, J., & Habraken, A. (2004). Lingopti project: semi-continuous casting process of copper-nickel alloys. Proceedings of the 21st International Congress of Theoritical and Applied Mechanics. Warsaw, Pologne.
Peer reviewed
ORBi viewed: 59 (17 ULiège) ; downloaded: 59 (4 ULiège) — SCOPUS®: -
Castagne, S., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2004). Mesoscopic model of intergranular cracks in low carbon steel during cooling of continuous casting. In M., Lamberigts, Proceedings of the 2nd international conference of thermomechanical processing of steels (TMP 2004) (pp. 233-240). Liège, Belgique: Stahl Eisen.
Peer reviewed
ORBi viewed: 54 (5 ULiège) ; downloaded: 64 (2 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., Bouvier, S., & Habraken, A. (2004). Deep drawing simulations with different polycrystalline models. In S., Gosh, J. M., Castro, & J. K., Lee (Eds.), Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 588-593). American Institute of Physics AIP Conference Proceedings.
Peer reviewed
ORBi viewed: 47 (8 ULiège) ; downloaded: 67 (6 ULiège) — SCOPUS®: -
de Montleau, P., Duchene, L., Bouvier, S., Flores, P., & Habraken, A. (2004). Deep drawing process with different elasto-plastic law. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Material Forming (pp. 163-166). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 75 (9 ULiège) ; downloaded: 122 (9 ULiège) — SCOPUS®: -
Flores, P., de Montleau, P., Mathonet, V., Moureaux, P., & Habraken, A. (2004). Identification of material parameters using bi-axial machine. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 237-240). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 56 (4 ULiège) ; downloaded: 256 (5 ULiège) — SCOPUS®: -
Van Bael, A., He, S., Van Houtte, P., Delannay, L., Duchene, L., & Habraken, A. (2004). Finite-element simulations of cup drawing using the taylor and the lamel model. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 215-218). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 23 (4 ULiège) — SCOPUS®: -
Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C., Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.
Peer reviewed
ORBi viewed: 98 (17 ULiège) ; downloaded: 218 (10 ULiège) — SCOPUS®: -
Pascon, F., & Habraken, A. (2003). 2D1/2 thermo-mechanical model of continuous casting using FEM. In V., Brucato (Ed.), Proceedings of the 6th International ESAFORM Conference on Material Forming. Nuova Ipsa editore.
Peer reviewed
ORBi viewed: 80 (9 ULiège) ; downloaded: 82 (6 ULiège) — SCOPUS®: -
Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P., Iu, L. N., Lamas, Y. P., Li, & K. M., Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse: Swets & Zeitlinger.
Peer reviewed
ORBi viewed: 37 (6 ULiège) ; downloaded: 36 (7 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2003). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. Journal de Physique IV, 105.
Peer reviewed
ORBi viewed: 31 (5 ULiège) ; downloaded: 90 (4 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2003: 0.319; latest: -; IF5: - — EigenF: — Article Infl.:
Castagne, S., & Habraken, A. (2003). Investigation of transverse cracks initiation in continuous steel casting using a finite element approach. Advances in Computational & Experimental Engineering. C.A. He & Sciences.
Peer reviewed
ORBi viewed: 44 (4 ULiège) ; downloaded: 68 (3 ULiège) — SCOPUS®: -
Pietrapertosa, C., Zhang, L., Habraken, A., & Jaspart, J.-P. (2003). Clinching joining system: validation of numerical models. In V., Brucato, Proceedings of the 6th International ESAFORM Conference on Material Forming (pp. 351-354). Salerno, Italy: Nuova Ipsa editire.
Peer reviewed
ORBi viewed: 132 (6 ULiège) ; downloaded: 419 (4 ULiège) — SCOPUS®: -
de Montleau, P., Duchene, L., Flores, P., & Habraken, A. (2003). Numerical shear tests for different elasto-plastic laws. In E., Onate & D. R. J., Owen, Proceedings of the VII International Conference on Computational Plasticity (COMPLAS 2003). Barcelona, Spain: CIMNE.
Peer reviewed
ORBi viewed: 43 (10 ULiège) ; downloaded: 74 (8 ULiège) — SCOPUS®: -
Castagne, S., Pascon, F., Miesse, G., & Habraken, A. (2003). Finite element analysis of continuous steel casting. Proceedings of the First International Conference Finite element for process analysis.
Peer reviewed
ORBi viewed: 199 (5 ULiège) ; downloaded: 321 (4 ULiège) — SCOPUS®: -
Castagne, S., Pascon, F., Bles, G., & Habraken, A. (2003). Developments in finite element simulations of continuous casting. Proceedings of the 2nd International Conference on Thermal Process Modelling and Computer Simulations (ICTPMCS).
Peer reviewed
ORBi viewed: 40 (6 ULiège) ; downloaded: 53 (5 ULiège) — SCOPUS®: -
Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.
Peer reviewed
ORBi viewed: 85 (19 ULiège) ; downloaded: 65 (8 ULiège) — SCOPUS®: -
Flores, P., De Montleau, P., Habraken, A., & Mathonet, V. (2003). Simulations numériques d'essais de cisaillement simple. 16ème Congrès fançais de Mécanique.
Peer reviewed
ORBi viewed: 152 (9 ULiège) ; downloaded: 783 (10 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. In S., Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6) Non Linear Mechanics of Anisotropic Materials (pp. 337-344).
Peer reviewed
ORBi viewed: 47 (9 ULiège) ; downloaded: 94 (4 ULiège) — SCOPUS®: -
Pascon, F., & Habraken, A. (2002). Finite element thermo-mechanical model of continuous steel casting. In M., Kiuchi, H., Nishimura, & J., Yanagimoto, Proceedings of the 7th International Conference on Advanced Technology of Plasticity.
Peer reviewed
ORBi viewed: 53 (11 ULiège) ; downloaded: 74 (9 ULiège) — SCOPUS®: -
Flores, P., Duchene, L., & Habraken, A. (2002). Texture analysis of cylindrical cup during deep-drawing process. In D. Y., Yang, S. I., Oh, H., Huh, & Y. H., Kim, Proceedings of the 5th international conference NUMISHEET 2002 (pp. 605-610).
Peer reviewed
ORBi viewed: 136 (7 ULiège) ; downloaded: 202 (5 ULiège) — SCOPUS®: -
Hubsch, P., Bourdouxhe, M., Pascon, F., & Habraken, A. (2002). Numerical simulation of the solidification of a beam blank in the mould. Proceedings of the 4th European Continuous Casting Conference (pp. 421-428). Birmingham: IOM Communications.
Peer reviewed
ORBi viewed: 127 (6 ULiège) ; downloaded: 143 (4 ULiège) — SCOPUS®: -
Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). Acceleration of finite element analysis by parallel processing. In M., Pietrzyk, Z., Mitura, & J., Kaczmar (Eds.), Proceedings of the 5th international ESAFORM Conference on Material Forming (pp. 47-50). Kraków, Poland: Akapit.
Peer reviewed
ORBi viewed: 93 (13 ULiège) ; downloaded: 100 (12 ULiège) — SCOPUS®: -
Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). A parallel computing model for the acceleration of a finite element software. In H. R., Arabnia, Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications (pp. 185-191). CSREA Press.
Peer reviewed
ORBi viewed: 104 (11 ULiège) ; downloaded: 54 (13 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2001). Influence of steel anisotropy during deep-drawing process. In A., Habraken, Proceedings of the 4th international Conference ESAFORM (pp. 461-464).
Peer reviewed
ORBi viewed: 235 (4 ULiège) ; downloaded: 141 (5 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Modelling of the micro-mechanical behaviour of steel sheets during deep-drawing. In J. R., Duflou, M., Geiger, H. J. J., Kals, B., Shirvani, & U. P., Singh, Proceedings of the 9th International Conference on Sheet Metal (pp. 631-638).
Peer reviewed
ORBi viewed: 29 (6 ULiège) ; downloaded: 21 (5 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2001). Implementation of a texture based interpolated yield locus in a FEM code. In Balkema, Proceedings of NUMIFORM 2001 (Simulation of Materials Processing: Theory, Methods and Applications) (pp. 203-208). Tokyo: Mori Editor.
Peer reviewed
ORBi viewed: 26 (6 ULiège) ; downloaded: 31 (4 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Micro-mechanical analysis of steel sheet behaviour during deep-drawing. Proceedings of the First Asian-Pacific Congress on Computational Mechanics: APCOM 2001.
Peer reviewed
ORBi viewed: 22 (6 ULiège) — SCOPUS®: -
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modeling of thermo-mechanical behaviour of a steel strand in continuous casting. In A., Habraken, Proceedings of the 4th International Conference ESAFORM (pp. 867-870).
Peer reviewed
ORBi viewed: 34 (6 ULiège) ; downloaded: 101 (4 ULiège) — SCOPUS®: -
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modelling of thermo-mechanical behaviour of a steel strand in continuous casting. Proceedings of the 7th European Conference on Advanced Materials and processes (Euromat 2001).
Peer reviewed
ORBi viewed: 57 (10 ULiège) ; downloaded: 68 (6 ULiège) — SCOPUS®: -
Castagne, S., Charles, Habraken, A., Zhang, L., Gaspard, & Batazzi. (2000). Numerical Modelling of the Forging Process of Rolls for Rolling Mills. Proceedings of the 2nd International Conference on forging and related technology.
Peer reviewed
ORBi viewed: 24 (2 ULiège) ; downloaded: 31 (3 ULiège) — SCOPUS®: -
Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials.
Peer reviewed
ORBi viewed: 46 (12 ULiège) ; downloaded: 73 (6 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2000). Validation of a FEM model coupled with texture applied to deep drawing process. Proceedings of the 3rd ESAFORM Conference on Material Forming (pp. 3 à IV-6). Stuttgart, Germany: Frits Editor.
Peer reviewed
ORBi viewed: 41 (9 ULiège) ; downloaded: 57 (11 ULiège) — SCOPUS®: -
Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials. In J. L., Tassoulas (Ed.), Proceedings of the 14th Engineering Mechanics Conference (pp. 6).
Peer reviewed
ORBi viewed: 65 (20 ULiège) ; downloaded: 35 (5 ULiège) — SCOPUS®: -
Dréan, M., Habraken, A., Bouchaïr, A., & Muzeau, J. P. (2000). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. In M., Iványi, J.-P., Muzeau, & B. H. V., Topping, Computational Steel Structures Technology (pp. 87-97). Edinburgh, Scotland: CIVIL-COMP LTD.
Peer reviewed
ORBi viewed: 16 (2 ULiège) ; downloaded: 113 (2 ULiège) — SCOPUS®: -
Habraken, A., Zhang, L., Wang, X. C., & Cescotto, S. (2000). A new elastic-visco-plastic damage model for annealed aluminium: theory, calibration and validation. In A., Benallal, Proceedings of the Continuous Damage and Fracture Symposium (pp. 341-352). France: Elsevier.
Peer reviewed
ORBi viewed: 58 (7 ULiège) ; downloaded: 140 (5 ULiège) — SCOPUS®: -
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermo-mechanical model of a strand in the mould of a continuous casting plant. Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000) (pp. 15).
Peer reviewed
ORBi viewed: 70 (12 ULiège) ; downloaded: 113 (10 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Duchene, L., Habraken, A., & Cescotto, S. (1999). Elastoplastic anisotropic model based on texture analysis to simulate steel sheet behavior. 7th International Symposium on Plasticity.
Peer reviewed
ORBi viewed: 12 (6 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., & Habraken, A. (1999). Texture effects on steel sheet behaviour under large strain simulations. 12th International Conference on Texture of Materials (ICOTOM12).
Peer reviewed
ORBi viewed: 12 (5 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., & Habraken, A. (1999). Metal plastic behaviour linked to texture analysis and FEM method. 4th International Conference NUMISHEET 1999.
Peer reviewed
ORBi viewed: 21 (3 ULiège) — SCOPUS®: -
Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1999). Integration of recrystallisation model coupled with an elasto-visco-plastic law - Experimental tests and calibration of this model. Proceedings of the 2nd ESAFORM Conference on Material Forming (pp. 529-532). Guimaraes, Portugal.
Peer reviewed
ORBi viewed: 42 (2 ULiège) ; downloaded: 65 — SCOPUS®: -
Habraken, A., Radu, J.-P., Duchene, L., Wauters, M., & Munhoven, S. (1998). Comparisons of anisotropic elastoplastic laws applied to steel sheet. International Conference NUMIFORM 1998.
Peer reviewed
ORBi viewed: 18 (10 ULiège) — SCOPUS®: -
Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1998). Modeling of elasto-viscoplastic behaviour of steels at high temperatures. In Baajens & Huetink (Ed.), Proceedings of Simulation of Materials Processing, Methods and Applications. Esaform (pp. 57-60). Rotterdam, Pays-Bas: Balkema.
Peer reviewed
ORBi viewed: 49 (3 ULiège) ; downloaded: 4 (1 ULiège) — SCOPUS®: -
Charles, J.-F., Habraken, A., & Lecomte-Beckers, J. (1998). An elasto-viscoplastic model for forging steel at high temperatures. Proceedings of NUMIFORM 98, Simulation of Materials Processing : Theory, Methods and Applications (pp. 277-282). Balkema, Enschede, The Netherlands: Huetink, Baaijens.
Peer reviewed
ORBi viewed: 15 (4 ULiège) — SCOPUS®: -
Mosbah, P., Bouvard, D., Habraken, A., & Charlier, R. (1997). Modelling of Compression and Ejection of Metal Powder: Comparison of Analytical and Numerical Methods. Proc. of the European Conference on Advances in Structural PM Component Production.
Peer reviewed
ORBi viewed: 9 — SCOPUS®: -
Wang, X. C., & Habraken, A. (1996). An Elastic-visco-plastic Damage Model: from Theory to Application. Journal de Physique IV, 6, 549-558.
Peer reviewed
ORBi viewed: 28 (3 ULiège) — SCOPUS®: 0
IF 1996: 0.186; latest: -; IF5: - — EigenF: — Article Infl.:
Habraken, A., Zhu, Y. Y., Charlier, R., & Wang, X. C. (1995). A damage model for elastoviscoplastic materials at large strains. Proc. of the Int. Conf. on Computational Plasticity, Fundamentals and Applications, COMPLAS.
Peer reviewed
ORBi viewed: 20 (7 ULiège) — SCOPUS®: -
Bille, J. P., Cescotto, S., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. 2nd Contact Mechanics Int. Symp., CMIS.
Peer reviewed
ORBi viewed: 26 (10 ULiège) — SCOPUS®: -
Argento, C., Bouvard, D., Stutz, P., Charlier, R., & Habraken, A. (1994). Numerical Simulation of Hot Isostatic Pressing of Metal Powder: Influence of Constitutive Equations. Acte du Powder Metallurgy World Congress.
Peer reviewed
ORBi viewed: 59 ; downloaded: 0 — SCOPUS®: -
Habraken, A., Radu, J.-P., & Charlier, R. (1992). Numerical approach of contact with friction between two bodies in large deformations. Proc. of the Contact Mechanics Int. Symp.
Peer reviewed
ORBi viewed: 18 (4 ULiège) — SCOPUS®: -
Zhu, Y. Y., Cescotto, S., & Habraken, A. (1992). A fully coupled elastoplastic damage theory based on the energy equivalence. In D. R. J., Owen, E., Onate, & E., Hinton, Computational Plasticity, Fundamentals and Applications (pp. 1455-1466). Swansea, U. K: Pineridge Press.
Peer reviewed
ORBi viewed: 41 (12 ULiège) — SCOPUS®: -
Dyduch, M., & Habraken, A. (1991). Automatic adaptive remeshing for numerical simulation of forging. Actes de la Conférence européenne sur les nouvelles avancées en calcul des structures.
Peer reviewed
ORBi viewed: 14 (3 ULiège) — SCOPUS®: -
Dyduch, M., Habraken, A., & Cescotto, S. (1991). A variable density grid generation for automatic remeshing processor in 2D metalforming simulations. In A. S., Arcilla, J., Häuser, P. R., Eiseman, & J. F., Thompson, Numerical Grid Generation in Computational Fluid Dynamics and Related Fields (pp. 429-440).
Peer reviewed
ORBi viewed: 9 (3 ULiège) — SCOPUS®: -
Habraken, A., & Bourdouxhe, M. (1990). Modelling of the cooling of steel pieces. In Wrobel, Brebbia, & Nowak, Advanced Computational Method in Heat Transfer, Vol. 3 - Phase Change and Combustion simulation. Proceedings of the First International Conference (pp. 469-479). Boston: Computation Mechanics Publication Southampton.
Peer reviewed
ORBi viewed: 9 (4 ULiège) — SCOPUS®: -
Cescotto, S., Habraken, A., Radu, J.-P., & Charlier, R. (1989). Some recent developments in computer simulation of metal forming processes. Proc. of the 9th Int. Conf. on Computer Methods in Mechanics, Vol. 4.
Peer reviewed
ORBi viewed: 26 (2 ULiège) — SCOPUS®: -
Habraken, A. (1989). Coupled Thermomechanical Analysis with Microstructural Computation of Steel Pieces. In E. G., Thompson, R. D., Wood, O. C., Zienkiewicz, & A., Samuelsson, Proceedings of NUMIFORM 89 Numerical Method in Industrial Forming Processes (pp. 165-170). A. A. Balkema.
Peer reviewed
ORBi viewed: 9 (2 ULiège) — SCOPUS®: -
Habraken, A., & Radu, J.-P. (1989). Simulation of forging applications with the finite element method. In E. G., Thompson, R. D., Wood, O. C., Zienkiewicz, & A., Samuelsson, Proceedings of NUMIFORM 89 Numerical Method in Industrial Forming Processes (pp. 543-548). A. A. Balkema.
Peer reviewed
ORBi viewed: 11 (2 ULiège) — SCOPUS®: -
Habraken, A., Bourdouxhe, M., & Denis, S. (1988). Generation on Internal and Residual Stresses in Steel Workpieces during cooling. In G., Beck, S., Denis, & A., Simon, International Conference on Residual Stresses: ICRS 2 (pp. 593-599).
Peer reviewed
ORBi viewed: 20 (5 ULiège) — SCOPUS®: -
Cescotto, S., Grober, H., Charlier, R., & Habraken, A. (1987). Prévision des défauts de géométrie au cours du laminage à chaud des aciers. Proc. de la Conf. Int. sur les Méthodes de calculs pour la Prévision des Défauts de Mise en Forme.
Peer reviewed
ORBi viewed: 94 (1 ULiège) — SCOPUS®: -
Habraken, A., & Charlier, R. (1986). A three-dimensional finite element for the simulation of metal forming processes. Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed
ORBi viewed: 8 (4 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Charlier, R., & Habraken, A. (1986). On the modelling of tridimensional contact with friction problems in context of large displacements problems. Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed
ORBi viewed: 13 — SCOPUS®: -
Grober, H., Cescotto, S., Charlier, R., Bourdouxhe, M., & Habraken, A. (1985). Numerical simulation of metal forming processes. Proc. Int. Conf. on Nonlinear Mechanics.
Peer reviewed
ORBi viewed: 42 (6 ULiège) ; downloaded: 5 (3 ULiège) — SCOPUS®: -
À portée nationale
Flores, P., & Habraken, A. (2006). Caracterizacion del comportamiento elasto-plastico de placas metalicas.
Peer reviewed
ORBi viewed: 35 (12 ULiège) — SCOPUS®: -
Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E., Dick, J., Vierendeels, F., Cantrijn, G., Campion, & C., Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics.
Peer reviewed
ORBi viewed: 88 (11 ULiège) ; downloaded: 188 (8 ULiège) — SCOPUS®: -
Castagne, S., & Habraken, A. (2000). Development of a microscopic damage model for steel at high temperature. Proceedings of the 5ème congrès national belge, Mécanique théorique et appliquée (pp. 175-178).
Peer reviewed
ORBi viewed: 17 (3 ULiège) ; downloaded: 46 (3 ULiège) — SCOPUS®: -
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermomechanical model of the behaviour of a strand in continuous steel casting using finite element method. Proceedings of the 5ème Congrès national belge, Mécanique théorique et appliquée (pp. 239-242).
Peer reviewed
ORBi viewed: 20 (11 ULiège) ; downloaded: 45 (6 ULiège) — SCOPUS®: -
Charles, J. F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. Proceedings of the 5ème Congrès national belge, Mecanique théorique et appliquée (pp. 243-246).
Peer reviewed
ORBi viewed: 23 (6 ULiège) ; downloaded: 42 (3 ULiège) — SCOPUS®: -
Charles, J.-F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. In M., Pietrzyk, J., Kusiak, J., Majta, P., Hartley, & I., Pillinger, Proceedings of the 8th International Conference on Metal Forming (pp. 625-631).
Peer reviewed
ORBi viewed: 68 (11 ULiège) ; downloaded: 57 (8 ULiège) — SCOPUS®: -
Bille, J. P., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed
ORBi viewed: 11 (1 ULiège) — SCOPUS®: -
Cescotto, S., Charlier, R., & Habraken, A. (1987). Simulation du formage des métaux par éléments finis. 1er Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed
ORBi viewed: 17 (3 ULiège) — SCOPUS®: -

Communications uniquement orales ou poster

À portée internationale
Delahaye, J., Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (2018, September). Dominant strengthening mechanism of AlSi10Mg processed by Selective Laser Melting. Poster session presented at Colloque Indentation 2018, Liège, Belgium.
ORBi viewed: 51 (11 ULiège) ; downloaded: 3 (3 ULiège)
Tchuindjang, J. T., Esteva, H., Tran, H. S., Paydas, H., Maurizi-Enrici, T., Delahaye, J., Mertens, A., & Habraken, A. (2018, June 27). 3D Thermal simulation in Additive Manufacturing processes with microstructure validation to help developing new thermo-metallurgical models: case study with Direct Metal Deposition of Ti6Al4V. Paper presented at MatX 2018 - International Conference on Material Innovation, Nuremberg, Germany.
ORBi viewed: 34 (9 ULiège) ; downloaded: 4 (4 ULiège)
Tomé Jardin, R. A., Hashemi, N., Tran, H. S., Mertens, A., & Habraken, A. (2018, May 28). Sensitivity analysis of melt pool - Finite Element prediction in laser cladding process of HSS material. Paper presented at 3rd Workshop on Metal AM, Liège, Belgium.
ORBi viewed: 22 (3 ULiège) ; downloaded: 13 (6 ULiège)
Paydas, H., Tran, H. S., Carrus, R., Habraken, A., Mertens, A., & Tchuindjang, J. T. (2018, May 28). Investigation into the occurrence of recrystallization during the additive manufacturing of a thick Ti6Al4V deposit. Poster session presented at 3rd Workshop on Additive Manufacturing of Metals, Liège, Belgium.
ORBi viewed: 20 (3 ULiège) ; downloaded: 1 (1 ULiège)
Tomé Jardin, R. A., Tran, H. S., Hashemi, N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (2018, April 25). 2D FE Simulations of High Speed Steel Laser Cladding Process. Paper presented at ESAFORM, Palermo, Italy.
Peer reviewed
ORBi viewed: 33 (3 ULiège) ; downloaded: 17 (5 ULiège)
Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (2018, March 28). Influence of the local thermal history and microstructure on the wear behaviour of laser clad high speed steel thick coatings. Paper presented at 16th European Mechanics of Materials Conference, Nantes, France.
ORBi viewed: 23 (10 ULiège) ; downloaded: 4 (4 ULiège)
Tran, H. S., Tchuindjang, J. T., Paydas, H., Tomé Jardin, R. A., Carrus, R., Mertens, A., & Habraken, A. (2018, March 28). Predicted microstructure in repair technology of Ti-6Al-4V. Paper presented at 16th edition of the European Mechanics of Material Conference, Nantes, France.
ORBi viewed: 43 (10 ULiège) ; downloaded: 31 (11 ULiège)
Delahaye, J., Mertens, A., Dedry, O., Rigo, O., Vertruyen, B., Lecomte-Beckers, J., Habraken, A., & Delahaye, J. (2017, September 21). Effect of solution treatment on the fracture mechanisms of AlSi10Mg parts produced by Selective Laser Melting. Poster session presented at European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), Thessaloniki, Greece.
ORBi viewed: 129 (25 ULiège) ; downloaded: 3 (3 ULiège)
Tomé Jardin, R. A., Tchuindjang, J. T., Paydas, H., Carrus, R., Mertens, A., Lecomte-Beckers, J., Habraken, A., & Tran, H. S. (2017, June 28). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. Paper presented at Workshop on metal additive manufacturing, Louvain-la-Neuve, Belgium.
ORBi viewed: 44 (13 ULiège) ; downloaded: 24 (3 ULiège)
Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (2017, June). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES. Paper presented at 14th International Conference on Fracture - ICF14, Rhodes, Greece.
ORBi viewed: 74 (24 ULiège) ; downloaded: 58 (14 ULiège)
Bouffioux, C., Habraken, A., Duchene, L., & Canales Cardenas, C. (2017, May 03). Characterization of Fatigue Behaviour, from Material Science to Civil Engineering Applications. Paper presented at Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.
ORBi viewed: 36 (10 ULiège) ; downloaded: 29 (3 ULiège)
Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016, July 05). A 2D and 3D thermal model of powder injection laser cladding. Paper presented at NUMIFORM, Troyes, France.
Peer reviewed
ORBi viewed: 46 (4 ULiège) ; downloaded: 36 (2 ULiège)
Hashemi, S. N., Gilles, G., Tomé Jardin, R. A., Tran, H. S., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2015, October 23). 2D Thermal model of powder injection laser cladding of high speed steels (HSS). Paper presented at European Mechanics Society (EUROMECH).
ORBi viewed: 84 (41 ULiège) ; downloaded: 39 (18 ULiège)
Tchuindjang, J. T., Habraken, A., & Lecomte-Beckers, J. (2015, September). Study of the Crystallization Behavior and the Subsequent Martensitic Transformation in a High Chromium Cast Steel submitted to Different Austenitization Temperatures. Paper presented at Euromat 2015 - European Congress and Exhibition on Advanced Materials and Processes, Warsaw, Poland.
ORBi viewed: 29 (8 ULiège) ; downloaded: 2 (2 ULiège) — SCOPUS®: -
Canales Cardenas, C., Boman, R., Bussetta, Habraken, A., & Ponthot, J.-P. (2015, July). Comparison of fracture prediction models on sheet metal blanking simulations. Paper presented at 4th International Conference on Computational Modeling of Fracture and Failure - CFRAC 2015, Cachan, France.
ORBi viewed: 75 (27 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: -
Keller, C., Hug, E., Duchene, L., & Habraken, A. (2015, January 04). Effect of stress path on the miniaturizatio size effect for nickel polycrystals. Paper presented at PLASTICITY, DAMAGE & FRACTURE 2015, Montego Bay, Jamaica.
ORBi viewed: 52 (16 ULiège) ; downloaded: 45 (4 ULiège) — SCOPUS®: -
Duchene, L., Marmi, A., & Habraken, A. (2014, September). Assessment of a multiscale fatigue damage model associated with stress gradient effects. Poster session presented at The 10th International Conference on Fatigue Damage of Structural Materials, Hyannis, USA.
ORBi viewed: 75 (13 ULiège) ; downloaded: 70 (7 ULiège) — SCOPUS®: -
Canales Cardenas, C., Bussetta, P., Habraken, A., & Ponthot, J.-P. (2014). On the numerical simulation of sheet metal blanking process. Paper presented at 1st. International conference on COmputational methods in Manufacturing Processes (ICOMP'2014), Saint-Étienne, France.
ORBi viewed: 160 (29 ULiège) ; downloaded: 12 (12 ULiège)
de Sena, J. I., Duchene, L., Habraken, A., Alves de Sousa, R., & Valente, R. (2013, April 24). Adaptive remeshing strategies using solid-shell elements in the numerical simulation of incremental forming processes. Paper presented at ESAFORM 2013, Aveiro, Portugal.
ORBi viewed: 61 (12 ULiège) — SCOPUS®: -
Habraken, A., Gilles, G., Tuninetti Vásquez, V., Duchene, L., Hammami, W., delannay, L., bouvier, S., Bacroix, B., chauveau, T., & hug, E. (2013, January). Identification and validation of CRSS values for Ti6Al4V alloy. Paper presented at PLASTICITY 2013 , Symposium to honour Paul Van Houtte, BAHAMAS, ETATS UNIS.
ORBi viewed: 126 (29 ULiège) ; downloaded: 150 (17 ULiège) — SCOPUS®: -
Mertens, A., Guzmán Inostroza, C. F., Habraken, A., Behera, A. K., Duflou, J., & Lecomte-Beckers, J. (2012, September). Experimental Characterisation of Damage Occuring during Single Point Incremental Forming of a Ferritic Steel. Poster session presented at Hardening and Damage of Materials uder Finite Deformations : Constitutive Modeling and Numerical Implementation, Dortmund, Germany.
ORBi viewed: 112 (36 ULiège) ; downloaded: 16 (15 ULiège) — SCOPUS®: -
Fansi, J., Habraken, A., Balan, T., & Lemoine, X. (2012). Numerical simulation of DP steel damage using a physically-based GTN model. Poster session presented at German-French Summer School.
Peer reviewed
ORBi viewed: 54 (18 ULiège) ; downloaded: 188 (10 ULiège) — SCOPUS®: -
Duchene, L., Ben Bettaieb, A., Zhang, L., & Habraken, A. (2010, September). Effect of the enhanced assumed strain technique on the wrinkling prediction of thin aluminum film coated sheets. Paper presented at SolMech conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 65 (43 ULiège) — SCOPUS®: -
Habraken, A., Hammami, W., Gilles, G., & Duchene, L. (2010, May). Multiscale approach to describe the mechanical behaviour of Ti6Al4V alloys. Paper presented at 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France.
Peer reviewed
ORBi viewed: 50 (29 ULiège) ; downloaded: 9 (5 ULiège) — SCOPUS®: -
Diarra, H., Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2010). Study of the effects of α-grain proportion, shape and orientation on the mechanical behavior of Ti-5553 by FE simulations. Paper presented at Advances in Materials and Processing Technologies (AMPT 2010), Paris, France.
Peer reviewed
ORBi viewed: 72 (23 ULiège) ; downloaded: 82 (12 ULiège) — SCOPUS®: -
Gilles, G., Hammami, W., Libertiaux, V., Habraken, A., Cazacu, O., & Duchene, L. (2010). Experimental characterization and constitutive modeling of TA6V titanium mechanical behavior in tension and compression. Paper presented at 37th Solid Mechanics Conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 97 (37 ULiège) ; downloaded: 57 (12 ULiège) — SCOPUS®: -
Hammami, W., Duchene, L., Delannay, L., Bouvier, S., Coghe, F., Tirry, W., & Habraken, A. (2010). Critical resolved shear stresses and hardening parameter optimisation using crystal plasticity model for Ti6AL4V sheet based on simple tension tests & texture evolution. Paper presented at 2nd International Symposium Computational Mechanics of Polycrystals, Bad Honnef, Germany.
Peer reviewed
ORBi viewed: 72 (31 ULiège) — SCOPUS®: -
Duchene, L., Bouvier, S., & Habraken, A. (2009, September). Accurate earing profile prediction during deep drawing with microstructure based hardening and crystal plasticity models. Paper presented at International Conference on Material Modelling (ICMM 2009), Dortmund, Allemagne.
Peer reviewed
ORBi viewed: 62 (15 ULiège) — SCOPUS®: -
À portée nationale
Delahaye, J., Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (2018, May 28). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties. Paper presented at Workshop on Metal Additive Manufacturing, Liège, Belgium.
ORBi viewed: 81 (13 ULiège) ; downloaded: 4 (4 ULiège)
Guzmán Inostroza, C. F., & Habraken, A. (2014, December). On Damage Characterization of a Steel Sheet. Poster session presented at Encuentros ChileGlobal, Santiago, Chile.
ORBi viewed: 44 (11 ULiège) ; downloaded: 28 (9 ULiège) — SCOPUS®: -
Guzmán Inostroza, C. F., & Habraken, A. (2014, May 12). Fully implicit integration scheme for the GTN model. Poster session presented at IAP Plenary session spring meeting, Gent, Belgium.
ORBi viewed: 72 (8 ULiège) ; downloaded: 147 (6 ULiège) — SCOPUS®: -
Fansi, J., Habraken, A., Balan, T., Lemoine, X., Landron, C., Maire, E., Bouaziz, O., & Ben Bettaieb, M. (2012). Application of an Advanced GTN Model. Paper presented at 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, France.
Peer reviewed
ORBi viewed: 85 (21 ULiège) ; downloaded: 14 (10 ULiège) — SCOPUS®: 0

10. Comptes rendus et recensions critiques d’ouvrages

Fonder, G., Charlier, R., Habraken, A., & Chantrain, P. (1986, April). Development of a Dynamic 3-D Nonlinear Computer Program. Convention Européenne de la Construction métallique, 28.
Peer reviewed
ORBi viewed: 47 (5 ULiège) — SCOPUS®: -

11. Rapports

11.a. Rapports de recherche

Externes

Collin, F., Dewals, B., Elsen, C., Nguyen, F., Bastin, D., Habraken, A., Denoël, V., Franssen, J.-M., Teller, J., & Michel, F. (2015). Research Self-Evaluation Report of the Department ArGEnCo. Argenco.
ORBi viewed: 90 (24 ULiège) ; downloaded: 112 (46 ULiège) — SCOPUS®: -
Habraken, A., Bouffioux, C., Lequesne, C., Rosochowski, A., Rosochowska, M., Verlinden, B., Vidal, V., Ailinca, G., Duflou, J. R., Vanhove, H., Schmitz, A., & Pouteau, P. (2010). An Aluminium alloy improved by ECAP and formed by SPIF process – ALECASPIF (D/2010/1191/16). Brussels, Belgium: Belgian Science Policy.
ORBi viewed: 60 (8 ULiège) ; downloaded: 5 (4 ULiège) — SCOPUS®: -

Internes

Pietrapertosa, C., Habraken, A., & Jaspart, J.-P. (2005). Assemblage de tôles minces par clinchage en construction métallique. BM7820.
ORBi viewed: 34 ; downloaded: 67 (2 ULiège) — SCOPUS®: -

11.c. Autres rapports

Rossi, B., Gilles, G., Zolotas, E., & Habraken, A. (2011). Experimental investigations of the material behavior of Ti6Al4V titanium alloy.
ORBi viewed: 83 (12 ULiège) ; downloaded: 8 (7 ULiège) — SCOPUS®: -

14. Allocutions et communications diverses

14.b. Conférences données hors contexte académique

Habraken, A., Delvenne, P., & Elsen, C. (2017). Quels futurs pour la fabrication de pièces métalliques ? Paper presented at Cours-conférences du Collège Belgique à Liège / LIEGE CREATIVE, Liege, Belgique.
ORBi viewed: 53 (4 ULiège) ; downloaded: 21 (2 ULiège)

14.d Autres

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017). Optimal use of High Strength Steel grades within bridge.
ORBi viewed: 58 (23 ULiège) ; downloaded: 29 (7 ULiège)