Publications and communications of Loïc Salles

Yuan, J., Salles, L., Wong, C., & Patsias, S. (2019). A Novel Penalty-Based Reduced Order Modelling Method for Dynamic Analysis of Joint Structures. In IUTAM Symposium on Model Order Reduction of Coupled Systems. Springer. doi:10.1007/978-3-030-21013-7_12

Brake, M. R. W., Groß, J., Lacayo, R. M., Salles, L., Schwingshackl, C. W., Reuß, P., & Armand, J. (2017). Reduced order modeling of nonlinear structures with frictional interfaces. In The Mechanics of Jointed Structures: Recent Research and Open Challenges for Developing Predictive Models for Structural Dynamics. Springer. doi:10.1007/978-3-319-56818-8_24

de Figueiredo Stabile, A., Vizzaccaro, A., Salles, L., Colombo, A., Frangi, A., & Touzé, C. (October 2025). Reduced-order modelling of parameter-dependent systems with invariant manifolds: Application to Hopf bifurcations in follower force problems. International Journal of Non-Linear Mechanics, 177, 105133. doi:10.1016/j.ijnonlinmec.2025.105133

Krack, M., Brake, M. R. W., Schwingshackl, C., Gross, J., Hippold, P., Lasen, M., Dini, D., Salles, L., Allen, M. S., Shetty, D., Payne, C. A., Willner, K., Lengger, M., Khan, M. Y., Ortiz, J., Najera-Flores, D. A., Kuether, R. J., Miles, P. R., Xu, C., ... Scheel, M. (2025). The Tribomechadynamics Research Challenge: Confronting blind predictions for the linear and nonlinear dynamics of a thin-walled jointed structure with measurement results. Mechanical Systems and Signal Processing, 224, 112016. doi:10.1016/j.ymssp.2024.112016

Tüfekci, M., Sun, Y., Yuan, J., Maharaj, C., Liu, H., Dear, J. P., & Salles, L. (12 May 2024). Analytical vibration modelling and solution of bars with frictional clamps. Journal of Sound and Vibration, 577, 118307. doi:10.1016/j.jsv.2024.118307

Bisoi, A., Tüfekci, M., Öztekin, V., Denimal Goy, E., & Salles, L. (April 2024). Experimental Investigation of Mechanical Properties of Additively Manufactured Fibre-Reinforced Composite Structures for Robotic Applications. Applied Composite Materials, 31 (2), 421 - 446. doi:10.1007/s10443-023-10179-9

Tüfekci, M., Dear, J. P., & Salles, L. (April 2024). Forced vibration analysis of beams with frictional clamps. Applied Mathematical Modelling, 128, 450 - 469. doi:10.1016/j.apm.2024.01.031

Tüfekci, M., Baytak, T., Bulut, O., Pir, İ., Acarer Arat, S., Özkal, B., Liu, H., Dear, J. P., & Salles, L. (2024). Nonlinear behaviour of epoxy and epoxy-based nanocomposites: an integrated experimental and computational analysis. Mechanics Based Design of Structures and Machines, 52 (9), 6858 - 6888. doi:10.1080/15397734.2023.2293763

Tüfekci, M., Dear, J. P., & Salles, L. (2024). A finite element based approach for nonlocal stress analysis for multi-phase materials and composites. Engineering with Computers. doi:10.1007/s00366-024-02076-x

Tüfekci, M., Haddad, F. E., Salles, L., Setchfield, R., & Renson, L. (December 2023). Effects of the Seal Wire on the Nonlinear Dynamics of the Aircraft Engine Turbine Blades. Journal of Engineering for Gas Turbines and Power, 145 (12). doi:10.1115/1.4063413

Martin, A., Opreni, A., Vizzaccaro, A., Debeurre, M., Salles, L., Frangi, A., Thomas, O., & Touzé, C. (2023). Reduced-order modeling of geometrically nonlinear rotating structures using the direct parametrisation of invariant manifolds. Journal of Theoretical, Computational and Applied Mechanics. doi:10.46298/jtcam.10430

Yuan, J., Salles, L., Nowell, D., & Schwingshackl, C. (15 March 2023). Influence of mesoscale friction interface geometry on the nonlinear dynamic response of large assembled structures. Mechanical Systems and Signal Processing, 187, 109952. doi:10.1016/j.ymssp.2022.109952

Tüfekci, M., Özkal, B., Maharaj, C., Liu, H., Dear, J. P., & Salles, L. (March 2023). Strain-rate-dependent mechanics and impact performance of epoxy-based nanocomposites. Composites Science and Technology, 233, 109870. doi:10.1016/j.compscitech.2022.109870

Rendu, Q., & Salles, L. (2023). Development of a surrogate model for uncertainty quantification of compressor performance due to manufacturing tolerance. Journal of the Global Power and Propulsion Society, 7, 257 - 268. doi:10.33737/jgpps/168293

Vizzaccaro, A., Opreni, A., Salles, L., Frangi, A., & Touzé, C. (September 2022). High order direct parametrisation of invariant manifolds for model order reduction of finite element structures: application to large amplitude vibrations and uncovering of a folding point. Nonlinear Dynamics, 110 (1), 525 - 571. doi:10.1007/s11071-022-07651-9

Suriyanarayanan, V., Rendu, Q., Vahdati, M., & Salles, L. (April 2022). Effect of Manufacturing Tolerance in Flow Past a Compressor Blade. Journal of Turbomachinery, 144 (4). doi:10.1115/1.4052600

Sun, Y., Denimal, E., Yuan, J., & Salles, L. (March 2022). Geometric design of friction ring dampers in blisks using nonlinear modal analysis and Kriging surrogate model. Structural and Multidisciplinary Optimization, 65 (3). doi:10.1007/s00158-021-03093-w

Denimal, E., Renson, L., Wong, C., & Salles, L. (2022). Topology optimisation of friction under-platform dampers using moving morphable components and the efficient global optimization algorithm. Structural and Multidisciplinary Optimization, 65 (2). doi:10.1007/s00158-021-03158-w

Yuan, J., Sun, Y., Schwingshackl, C., & Salles, L. (2022). Computation of damped nonlinear normal modes for large scale nonlinear systems in a self-adaptive modal subspace. Mechanical Systems and Signal Processing, 162. doi:10.1016/j.ymssp.2021.108082

Vizzaccaro, A., Shen, Y., Salles, L., Blahoš, J., & Touzé, C. (October 2021). Direct computation of nonlinear mapping via normal form for reduced-order models of finite element nonlinear structures. Computer Methods in Applied Mechanics and Engineering, 384, 113957. doi:10.1016/j.cma.2021.113957

Zhu, Y.-P., Yuan, J., Lang, Z. Q., Schwingshackl, C. W., Salles, L., & Kadirkamanathan, V. (October 2021). The Data-Driven Surrogate Model-Based Dynamic Design of Aeroengine Fan Systems. Journal of Engineering for Gas Turbines and Power, 143 (10). doi:10.1115/1.4049504

Sun, Y., Vizzaccaro, A., Yuan, J., & Salles, L. (March 2021). An extended energy balance method for resonance prediction in forced response of systems with non-conservative nonlinearities using damped nonlinear normal mode. Nonlinear Dynamics, 103 (4), 3315 - 3333. doi:10.1007/s11071-020-05793-2

Sun, Y., Yuan, J., Denimal, E., & Salles, L. (01 February 2021). A Study of the Contact Interface for Compressor Blisks with Ring Dampers Using Nonlinear Modal Analysis. IOP Conference Series: Materials Science and Engineering, 1081 (1), 012041. doi:10.1088/1757-899x/1081/1/012041

Denimal, E., El Haddad, F., Wong, C., & Salles, L. (2021). Topological optimization of under-platform dampers with moving morphable components and global optimization algorithm for nonlinear frequency response. Journal of Engineering for Gas Turbines and Power, 143 (2), 9. doi:10.1115/1.4049666

Denimal, E., Wong, C., Salles, L., & Pesaresi, L. (2021). On the efficiency of a conical underplatform damper for turbines. Journal of Engineering for Gas Turbines and Power, 143 (2), 9. doi:10.1115/1.4049665

Fontanela, F., Vizzaccaro, A., Auvray, J., Niedergesäß, B., Grolet, A., Salles, L., & Hoffmann, N. (2021). Nonlinear vibration localisation in a symmetric system of two coupled beams. Nonlinear Dynamics, 103 (4), 3417 - 3428. doi:10.1007/s11071-020-05760-x

Niedergesäß, B., Papangelo, A., Grolet, A., Vizzaccaro, A., Fontanela, F., Salles, L., Sievers, A. J., & Hoffmann, N. (2021). Experimental observations of nonlinear vibration localization in a cyclic chain of weakly coupled nonlinear oscillators. Journal of Sound and Vibration, 497. doi:10.1016/j.jsv.2021.115952

Shen, Y., Vizzaccaro, A., Kesmia, N., Yu, T., Salles, L., Thomas, O., & Touzé, C. (2021). Comparison of Reduction Methods for Finite Element Geometrically Nonlinear Beam Structures. Vibration, 4 (1), 175 - 204. doi:10.3390/vibration4010014

Sun, Y., Yuan, J., Denimal, E., & Salles, L. (2021). Nonlinear modal analysis of frictional ring damper for compressor blisk. Journal of Engineering for Gas Turbines and Power, 143 (3). doi:10.1115/1.4049761

Sun, Y., Yuan, J., Vizzaccaro, A., & Salles, L. (2021). Comparison of different methodologies for the computation of damped nonlinear normal modes and resonance prediction of systems with non-conservative nonlinearities. Nonlinear Dynamics, 104 (4), 3077 - 3107. doi:10.1007/s11071-021-06567-0

Vizzaccaro, A., Salles, L., & Touzé, C. (2021). Comparison of nonlinear mappings for reduced-order modelling of vibrating structures: normal form theory and quadratic manifold method with modal derivatives. Nonlinear Dynamics, 103 (4), 3335 - 3370. doi:10.1007/s11071-020-05813-1

Yuan, J., Fantetti, A., Denimal, E., Bhatnagar, S., Pesaresi, L., Schwingshackl, C., & Salles, L. (2021). Propagation of friction parameter uncertainties in the nonlinear dynamic response of turbine blades with underplatform dampers. Mechanical Systems and Signal Processing, 156. doi:10.1016/j.ymssp.2021.107673

Yuan, J., Schwingshackl, C., Wong, C., & Salles, L. (2021). On an improved adaptive reduced-order model for the computation of steady-state vibrations in large-scale non-conservative systems with friction joints. Nonlinear Dynamics, 103 (4), 3283 - 3300. doi:10.1007/s11071-020-05890-2

Pesaresi, L., Fantetti, A., Cegla, F., Salles, L., & Schwingshackl, C. W. (2020). On the Use of Ultrasound Waves to Monitor the Local Dynamics of Friction Joints. Experimental Mechanics, 60 (1), 129 - 141. doi:10.1007/s11340-019-00550-y

Sun, Y., Yuan, J., Pesaresi, L., Denimal, E., & Salles, L. (2020). Parametric study and uncertainty quantification of the nonlinear modal properties of frictional dampers. Journal of Vibration and Acoustics, 142 (5). doi:10.1115/1.4046953

Vizzaccaro, A., Givois, A., Longobardi, P., Shen, Y., Deü, J.-F., Salles, L., Touzé, C., & Thomas, O. (2020). Non-intrusive reduced order modelling for the dynamics of geometrically nonlinear flat structures using three-dimensional finite elements. Computational Mechanics, 66 (6), 1293 - 1319. doi:10.1007/s00466-020-01902-5

Yuan, J., Salles, L., El Haddad, F., & Wong, C. (2020). An adaptive component mode synthesis method for dynamic analysis of jointed structure with contact friction interfaces. Computers and Structures, 229. doi:10.1016/j.compstruc.2019.106177

Armand, J., Pesaresi, L., Salles, L., Wong, C., & Schwingshackl, C. W. (2019). A modelling approach for the nonlinear dynamics of assembled structures undergoing fretting wear. Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, 475 (2223). doi:10.1098/rspa.2018.0731

Fontanela, F., Grolet, A., Salles, L., Chabchoub, A., Champneys, A. R., Patsias, S., & Hoffmann, N. (2019). Dissipative solitons in forced cyclic and symmetric structures. Mechanical Systems and Signal Processing, 117, 280 - 292. doi:10.1016/j.ymssp.2018.08.011

Fontanela, F., Grolet, A., Salles, L., & Hoffmann, N. (2019). Computation of quasi-periodic localised vibrations in nonlinear cyclic and symmetric structures using harmonic balance methods. Journal of Sound and Vibration, 438, 54 - 65. doi:10.1016/j.jsv.2018.09.002

Lacayo, R., Pesaresi, L., Groß, J., Fochler, D., Armand, J., Salles, L., Schwingshackl, C., Allen, M., & Brake, M. (2019). Nonlinear modeling of structures with bolted joints: A comparison of two approaches based on a time-domain and frequency-domain solver. Mechanical Systems and Signal Processing, 114, 413 - 438. doi:10.1016/j.ymssp.2018.05.033

Rendu, Q., Vahdati, M., & Salles, L. (2019). Radial Decomposition of Blade Vibration to Identify a Stall Flutter Source in a Transonic Fan. Journal of Turbomachinery, 141 (10). doi:10.1115/1.4044484

Yuan, J., El-Haddad, F., Salles, L., & Wong, C. (2019). Numerical assessment of reduced order modeling techniques for dynamic analysis of jointed structures with contact nonlinearities. Journal of Engineering for Gas Turbines and Power, 141 (3). doi:10.1115/1.4041147

Filippatos, A., Wollmann, T., Nguyen, M., Kostka, P., Dannemann, M., Langkamp, A., Salles, L., & Gude, M. (28 December 2018). Design and Testing of a Co-Rotating Vibration Excitation System. Sensors, 19 (1), 92. doi:10.3390/s19010092

Pesaresi, L., Armand, J., Schwingshackl, C. W., Salles, L., & Wong, C. (08 December 2018). An advanced underplatform damper modelling approach based on a microslip contact model. Journal of Sound and Vibration, 436, 327 - 340. doi:10.1016/j.jsv.2018.08.014

Armand, J., Salles, L., Schwingshackl, C. W., Süß, D., & Willner, K. (July 2018). On the effects of roughness on the nonlinear dynamics of a bolted joint: A multiscale analysis. European Journal of Mechanics. A, Solids, 70, 44 - 57. doi:10.1016/j.euromechsol.2018.01.005

Fontanela, F., Grolet, A., Salles, L., Chabchoub, A., & Hoffmann, N. (20 January 2018). Dark solitons, modulation instability and breathers in a chain of weakly nonlinear oscillators with cyclic symmetry. Journal of Sound and Vibration, 413, 467 - 481. doi:10.1016/j.jsv.2017.08.004

Krack, M., Salles, L., & Thouverez, F. (July 2017). Vibration Prediction of Bladed Disks Coupled by Friction Joints. Archives of Computational Methods in Engineering, 24 (3), 589 - 636. doi:10.1007/s11831-016-9183-2

Papangelo, A., Grolet, A., Salles, L., Hoffmann, N., & Ciavarella, M. (March 2017). Snaking bifurcations in a self-excited oscillator chain with cyclic symmetry. Communications in Nonlinear Science and Numerical Simulation, 44, 108 - 119. doi:10.1016/j.cnsns.2016.08.004

Panunzio, A. M., Salles, L., & Schwingshackl, C. W. (17 February 2017). Uncertainty propagation for nonlinear vibrations: A non-intrusive approach. Journal of Sound and Vibration, 389, 309 - 325. doi:10.1016/j.jsv.2016.09.020

Pesaresi, L., Salles, L., Jones, A., Green, J. S., & Schwingshackl, C. W. (15 February 2017). Modelling the nonlinear behaviour of an underplatform damper test rig for turbine applications. Mechanical Systems and Signal Processing, 85, 662 - 679. doi:10.1016/j.ymssp.2016.09.007

Armand, J., Pesaresi, L., Salles, L., & Schwingshackl, C. W. (February 2017). A Multiscale Approach for Nonlinear Dynamic Response Predictions with Fretting Wear. Journal of Engineering for Gas Turbines and Power, 139 (2). doi:10.1115/1.4034344

Salles, L., Staples, B., Hoffmann, N., & Schwingshackl, C. (November 2016). Continuation techniques for analysis of whole aeroengine dynamics with imperfect bifurcations and isolated solutions. Nonlinear Dynamics, 86 (3), 1897 - 1911. doi:10.1007/s11071-016-3003-y

Pesaresi, L., Salles, L., Elliott, R., Jones, A., Green, J. S., & Schwingshackl, C. W. (August 2016). Numerical and Experimental Investigation of an Underplatform Damper Test Rig. Applied Mechanics and Materials, 849, 1-12. doi:10.4028/www.scientific.net/amm.849.1

Salles, L., Blanc, L., Thouverez, F., Gouskov, A. M., & Jean, P. (09 January 2012). Dual time stepping algorithms with the high order harmonic balance method for contact interfaces with fretting-wear. Journal of Engineering for Gas Turbines and Power, 134 (3). doi:10.1115/1.4004236

Salles, L., Blanc, L., Thouverez, F., & Gouskov, A. M. (15 May 2011). Dynamic analysis of fretting-wear in friction contact interfaces. International Journal of Solids and Structures, 48 (10), 1513 - 1524. doi:10.1016/j.ijsolstr.2011.01.035

Salles, L., Andreev, F., & Gouskov, A. (2011). Моделирование износа в креплениях лопаток вентилятора ГТД при динамических нагрузках. Известия Самарского научного центра Российской академии наук, т. 13, №4(3), 2011, 13 (4).

Salles, L., Blanc, L., Thouverez, F., Gouskov, A. M., & Jean, P. (May 2010). Analyse multi-échelle de l'usure par fretting sous chargement dynamique. Mécanique and Industries, 11 (3-4), 277 - 282. doi:10.1051/meca/2010034

Salles, L., Blanc, L., Thouverez, F., & Gouskov, A. M. (2010). Dynamic analysis of fretting-wear in friction contact interfaces. Journal of Engineering for Gas Turbines and Power, 132 (1). doi:10.1115/1.3028229

Park, K., Allen, M. S., de Bono, M., Colombo, A., Frangi, A., Gobat, G., Haller, G., Hill, T., Jain, S., Kramer, B., Li, M., Salles, L., Najera-Flores, D. A., Neild, S., Renson, L., Saccani, A., Sharma, H., Shen, Y., Tiso, P., ... Tadmor, E. (2024). Reduced Order Modeling Research Challenge 2023: Nonlinear Dynamic Response Predictions for an Exhaust Cover Plate. In M. R. W. Brake (Ed.), Nonlinear Structures and Systems - Proceedings of the 42nd IMAC, A Conference and Exposition on Structural Dynamics 2024. Springer. doi:10.1007/978-3-031-69409-7_9

Denimal, E., Chevalier, R., Renson, L., & Salles, L. (2023). Shape Optimisation for Friction Dampers with Stress Constraint. Conference Proceedings of the Society for Experimental Mechanics Series, 65 - 73. doi:10.1007/978-3-031-04086-3_10

Denis, S., Hoffait, S., Ligot, J., de Cazenove, J., & Salles, L. (2023). IMPROVEMENT AND VALIDATION OF AN AUTONOMOUS EXPERIMENTAL SYSTEM TO IDENTIFY BLISK MISTUNING. In Structures and Dynamics - Emerging Methods in Engineering Design, Analysis, and Additive Manufacturing; Fatigue, Fracture, and Life Prediction; Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration (pp. 9). American Society of Mechanical Engineers (ASME). doi:10.1115/GT2023-102903

Lasen, M., Salles, L., Dini, D., & Schwingshackl, C. W. (2023). Tribomechadynamics Challenge 2021: A Multi-harmonic Balance Analysis from Imperial College London. Conference Proceedings of the Society for Experimental Mechanics Series, 79 - 82. doi:10.1007/978-3-031-04086-3_12

Tüfekci, M., El Haddad, F., Salles, L., Setchfield, R., & Renson, L. (2023). EFFECTS OF THE SEAL WIRE ON THE NONLINEAR DYNAMICS OF THE AIRCRAFT ENGINE TURBINE BLADES. In Structures and Dynamics - Emerging Methods in Engineering Design, Analysis, and Additive Manufacturing; Fatigue, Fracture, and Life Prediction; Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2023-101433

Vizzaccaro, A., Opreni, A., Salles, L., Frangi, A., & Touzé, C. (2023). Higher-Order Invariant Manifold Parametrisation of Geometrically Nonlinear Structures Modelled with Large Finite Element Models. In M. R. W. Brake (Ed.), Nonlinear Structures and Systems, Volume 1 - Proceedings of the 40th IMAC, A Conference and Exposition on Structural Dynamics, 2022. Springer. doi:10.1007/978-3-031-04086-3_32

Barreau, V., Denimal, E., & Salles, L. (2022). TOPOLOGICAL OPTIMISATION AND 3D PRINTING OF A BLADED DISC. In Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Engineering Design, Analysis, and Additive Manufacturing; Fatigue, Fracture, and Life Prediction. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-78141

De Cherisey, M., Salles, L., Renson, L., Vizzaccaro, A., & Wong, C. (2022). OPTIMIZATION OF A TURBOMACHINERY BLADE WITH REGARDS TO TIP-RUB EVENTS. In Structures and Dynamics - Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-82005

Yuan, J., Salles, L., & Schwingshackl, C. (2021). Effects of the Geometry of Friction Interfaces on the Nonlinear Dynamics of Jointed Structure. In G. Kerschen, Proceedings of the Society for Experimental Mechanics Series. Springer. doi:10.1007/978-3-030-77135-5_7

Denimal, E., Renson, L., & Salles, L. (2021). Topological Optimisation of Friction Dampers for Nonlinear Resonances. In Advances in Nonlinear Dynamics. NODYCON Conference Proceedings Series. Springer. doi:10.1007/978-3-030-81166-2_1

Shen, Y., Kesmia, N., Touzé, C., Vizzaccaro, A., Salles, L., & Thomas, O. (2021). Predicting the type of nonlinearity of shallow spherical shells: Comparison of direct normal form with modal derivatives. In Advances in Nonlinear Dynamics - NODYCON. Springer.

Bhatnagar, S., Yuan, J., Fantetti, A., Denimal, E., & Salles, L. (2020). Quantification of uncertainties in nonlinear vibrations of turbine blades with underplatform dampers. In ISMA 2020. KU Leuven.

Blahoš, J., Vizzaccaro, A., Salles, L., & El Haddad, F. (2020). Parallel harmonic balance method for analysis of nonlinear dynamical systems. Proceedings of the ASME Turbo Expo, 11. doi:10.1115/GT2020-15392

Denimal, E., El Haddad, F., Wong, C., & Salles, L. (2020). Topological optimization of under-platform dampers with moving morphable components and global optimization algorithm for nonlinear frequency response. In Proceedings of the ASME Turbo Expo 2020. ASME. doi:10.1115/GT2020-14394

Denimal, E., Salles, L., Wong, C., & Pesaresi, L. (2020). On the efficiency of a conical under-platform damper for turbines. In Proceedings of the ASME Turbo Expo 2020. ASME. doi:10.1115/GT2020-14642

Sun, Y., Yuan, J., Denimal, E., & Salles, L. (2020). Nonlinear modal analysis of frictional ring damper for compressor blisk. In Proceedings of the ASME Turbo Expo 2020. ASME. doi:10.1115/GT2020-14277

Tufekci, M., Rendu, Q., Yuan, J., Dear, J. P., Salles, L., & Cherednichenko, A. V. (2020). Stress and modal analysis of a rotating blade and the effects of nonlocality. Proceedings of the ASME Turbo Expo, 10B-2020. doi:10.1115/GT2020-14821

Venkatesh, S., Suzuki, K., Vahdati, M., Salles, L., & Rendu, Q. (2020). Effect of geometric uncertainty on a one stage transonic compressor of an industrial gas turbine. In ASME 2020 Turbo Expo: Turbine Technical Conference and Exposition. ASME. doi:10.1115/GT2020-16315

Wollmann, T., Dannemann, M., Langkamp, A., Modler, N., Gude, M., Salles, L., Hoffmann, N., & Filippatos, A. (2020). Combined experimental-numerical approach for the 3D vibration analysis of rotating composite compressor blades: An introduction. In 18th European Conference on Composite Materials (ECCM-18). Applied Mechanics Laboratory.

Yuan, J., Schwingshackl, C., Salles, L., Wong, C., & Patsias, S. (2020). Reduced order method based on an adaptive formulation and its application to fan blade system with dovetail joints. In Proceedings of the ASME Turbo Expo 2020. ASME. doi:10.1115/GT2020-14227

Zhu, Y.-P., Yuan, J., Lang, Z. Q., Schwingshackl, C. W., Salles, L., & Kadirkamanathan, V. (2020). The data driven surrogate model based dynamic design of aero-engine fan systems. In Proceedings of the ASME Turbo Expo 2020. ASME. doi:10.1115/GT2020-14272

Rendu, Q., Stapelfeldt, S., Salles, L., & Vahdati, M. (2019). Identification of low speed fan flutter trigger through radial decomposition of the modeshape. In Proceedings of the International Gas Turbine Congress 2019 Tokyo. Gas Turbine Society of Japan.

Saeed, Z., Jenovencio, G., Arul, S., Blahoš, J., Sudhakar, A., Pesaresi, L., Yuan, J., El Haddad, F., Hetzler, H., & Salles, L. (2019). A Test-Case on Continuation Methods for Bladed-Disk Vibration with Contact and Friction. In G. Kerschen, Proceedings of the Society for Experimental Mechanics Series. Springer. doi:10.1007/978-3-030-12391-8_27

Fontanela, F., Grolet, A., Salles, L., & Hoffmann, N. (2019). Solitons in cyclic and symmetric structures. In G. Kerschen (Ed.), Nonlinear Dynamics - Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. Springer Science and Business Media, LLC. doi:10.1007/978-3-319-74280-9_18

Tatar, A., Salles, L., Haslam, A. H., & Schwingshackl, C. W. (2019). Comparison of computational generalized and standard eigenvalue solutions of rotating systems. Conference Proceedings of the Society for Experimental Mechanics Series, 9, 187 - 194. doi:10.1007/978-3-319-74700-2_19

Sun, Y., Yuan, J., Pesaresi, L., & Salles, L. (05 November 2018). Nonlinear Vibrational Analysis for Integrally Bladed Disk Using Frictional Ring Damper. Journal of Physics. Conference Series, 1106 (1), 012026. doi:10.1088/1742-6596/1106/1/012026

Yuan, J., El-Haddad, F., Salles, L., & Wong, C. (2018). Numerical assessment of reduced order modeling techniques for dynamic analysis of jointed structures with contact nonlinearities. Proceedings of the ASME Turbo Expo, 7C. doi:10.1115/GT201875303

Armand, J., Salles, L., Schwingshackl, C., Willner, K., & Suß, D. (2017). Étude numérique de l'impact de la rugosité sur la réponse dynamique non-linéaire d'une liaison boulonnée. In 13e colloque national en calcul des structures. CSMA.

Franz, D., Salles, L., & Stapelfeldt, S. (2017). Analysis of a turbine bladed disk with structural and aerodynamic mistuning. In Structures and Dynamics. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2017-64586

Lu, Y., Salles, L., Zhao, F., & Vahdati, M. (2017). Aeroelastic analysis of NREL wind turbine. In Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2017-63161

Armand, J., Pesaresi, L., Salles, L., & Schwingshackl, C. W. (2016). A multi-scale approach for nonlinear dynamic response predictions with fretting wear. In Structures and Dynamics. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-56201

Gross, J., Armand, J., Lacayo, R. M., Reuss, P., Salles, L., Schwingshackl, C. W., Brake, M. R. W., & Kuether, R. J. (2016). A numerical round robin for the prediction of the dynamics of jointed structures. In D. Rixen (Ed.), Dynamics of Coupled Structures - Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016. Springer New York LLC. doi:10.1007/978-3-319-29763-7_20

Salles, L., Swacek, C., Lacayo, R. M., Reuss, P., Brake, M. R. W., & Schwingshackl, C. W. (2016). Numerical round robin for prediction of dissipation in lap joints. In G. Kerschen (Ed.), Dynamic Behavior of Materials. Springer New York LLC. doi:10.1007/978-3-319-15221-9_4

Salles, L., & Vahdati, M. (2016). Comparison of two numerical algorithms for computing the effects of mistuning of fan flutter. In Structures and Dynamics. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-57324

Armand, J., Salles, L., & Schwingshackl, C. W. (2015). Numerical Simulation of Partial Slip Contact Using a Semi-Analytical Method. In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Boston, United States: ASME. doi:10.1115/detc2015-46464

Panunzio, A. M., Salles, L., Schwingshackl, C., & Gola, M. (2015). Asymptotic numerical method and polynomial chaos expansion for the study of stochastic non-linear normal modes. In Structures and Dynamics. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2015-43560

Peradotto, E., Salles, L., Panunzio, A. M., & Schwingshackl, C. (2015). Stochastic methods for nonlinear rotordynamics with uncertainties. In Structures and Dynamics. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2015-43534

Vahdati, M., & Salles, L. (2015). The effects of mistuning on Fan flutter. In The 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. ISUAAAT.

Salles, L. (2013). Vibration non-linéaire des structures avec frottement: application aux modèles possédant de nombreux ddls non-linéaires. In 11e Colloque National en Calcul des Structures. France: CSMA.

Temis, Y., & Salles, L. (2012). Efficient CSM/CFD method for aeroelasticity stability analys of turbomachne blades. In Conférence ISROMAC 2012-14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery. ISROMAC.

Salles, L., Blanc, L., Thouverez, F., Gouskovb, A. M., & Jean, P. (2011). Dual time stepping algorithms with the high order harmonic balance method for contact interfaces with fretting-wear. In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASME. doi:10.1115/GT2011-46488

Salles, L., Gouskov, A. M., Blanc, L., Thouverez, F., & Jean, P. (2010). Dynamic analysis of fretting-wear in joint interface by a multiscale harmonic balance method coupled with explicit or implicit integration schemes. In ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. ASMEDC. doi:10.1115/GT2010-23264

Salles, L., Blanc, L., Thouverez, F., Gouskov, A. M., & Jean, P. (2009). Dynamic analysis of a bladed disk with friction and fretting-wear in blade attachments. Proceedings of the ASME Turbo Expo, 6 (PART A), 465 - 476. doi:10.1115/GT2009-60151

Laxalde, D., Salles, L., Blanc, L., & Thouverez, F. (2008). Non-linear modal analysis for bladed disks with friction contact interfaces. In 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. ASMEDC. doi:10.1115/GT2008-50860

Salles, L., Blanc, L., Thouverez, F., & Gouskov, A. M. (2008). Dynamic analysis of fretting-wear in friction contact interfaces. Proceedings of the ASME Turbo Expo, 5 (PART A), 543 - 554. doi:10.1115/GT2008-51112

Jacquet, C., Denoël, C., & Salles, L. (2025). Computational Methods for Whirl Flutter Analysis [Paper presentation]. 11th International Operational Modal Analysis Conference (IOMAC), Rennes, France.

Rendu, Q., & Salles, L. (14 September 2022). Development of a surrogate model for uncertainty quantification of compressor performance due to manufacturing tolerance [Paper presentation]. GPPS Chania22, Chania, Greece. doi:10.33737/gpps22-tc-136

Denimal, E., Renson, L., & Salles, L. (2022). Optimisation topologique d'amortisseurs par frottement pour la réduction des résonances non-linéaires par approches MMC et EGO [Paper presentation]. 15e colloque national en calcul des structures, Giens, France.

Martin, A., Opreni, A., Lian, S., Vizzaccaro, A., Salles, L., Alberto, F. A., & Touzé, C. (2022). Réduction de modèle en dynamique non linéaire par la méthode de paramétrisation des variétés invariantes. Application au cas des structures tournantes [Paper presentation]. 15e Colloque National en Calcul des Structures, Giens, France.

Martin, A., Opreni, A., Vizzaccaro, A., Salles, L., Frangi, A. A., & Touzé, C. (2022). Model order reduction for geometrically nonlinear beams featuring internal resonance and centrifugal effect [Paper presentation]. ENOC 2020+2.

Opreni, A., Vizzaccaro, A., Gobat, G., Martin, A., Salles, L., Frangi, A. A., & Touzé, C. (2022). Model order reduction of nonlinear MEMS structures: a high order invariant manifold approach [Paper presentation]. 15e Colloque National en Calcul des Structures, Giens, France.

Salles, L., Blahos, J., Vizzacarro, A., & Haddad, F. (2022). Parallel Harmonic Balance Method: towards very large scale systems [Paper presentation]. ENOC 2020+2, Lyon, France.

Salles, L., de Cherisey, M., & Vizzaccaro, A. (2022). Optimisation of blade shape for reducing vibration during tip-rub event [Paper presentation]. 15e Colloque National en Calcul des Structures, Giens, France.

Thomas, O., Givois, A., Vizzacaro, A., Longobardi, P., Grolet, A., Salles, L., Deü, J., Shen, Y., & Touzé, C. (2022). Finite elements based reduced order models for geometrically nonlinear and piezoelectric thin structures: validation and three-dimensional effects [Paper presentation]. ENOC 2020+2, Lyon, France.

Touzé, C., Vizzaccaro, A., Thomas, O., Salles, L., Opreni, A., Shen, Y., & Frangi, A. A. (2022). Comparison of nonlinear methods for reduced-order modeling of geometrically nonlinear structures [Paper presentation]. ENOC 2020+2, Lyon, France.

Vizzaccaro, A., Opreni, A., Salles, L., Frangi, A. A., & Touzé, C. (2022). Asymptotic Computation of Invariant Manifolds of large Finite Element structures with Geometric Nonlinearities [Paper presentation]. 15e Colloque National en Calcul des Structures, Giens, France.

Sun, Y., Yuan, J., & Salles, L. (2021). Flutter analysis of blisks with friction ring dampers [Paper presentation]. GPPS Xi'an21 Technical Conference for Power and Propulsion Sector, Xian, China.

Lian, S., El Haddad, F., & Salles, L. (2020). Enabling harmonic balance method to be applied for distributed geometric nonlinearities in structural dynamics [Paper presentation]. 29th International Conference on Noise and Vibration engineering (ISMA2022), Leuven, Belgium.

Salles, L., Vizzaccaro, A., & Sun, Y. (2019). Nonlinear Vibration in Aircraft Engines [Paper presentation]. 7th International Conference on Nonlinear Vibrations, Localization and Energy Transfer, Marseille, France.

Sun, Y., Yuan, J., Pesaresi, L., Denimal, E., & Salles, L. (2019). Using Complex Nonlinear Normal Mode to Design a Frictional Damper for Bladed Disk [Paper presentation]. 7th International Conference on Nonlinear Vibrations, Localization and Energy Transfer, Marseille, France.

Venkatesh, S., Rendu, Q., Vahdati, M., & Salles, L. (2019). Effect of manufacturing tolerance in flow past a compressor blade [Paper presentation]. 13th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, Lausanne, Switzerland. doi:10.29008/ETC2019-178

Pesaresi, L., Armand, J., Schwingshackl, C. W., Salles, L., & Wong, C. (2017). An advanced underplatform damper modelling approach based on a microslip contact model [Paper presentation]. ISROMAC, Honolulu, United States - Hawaii.