Rothkegel Ide, J. I., Renson, B., Bruyneel, M., & Noels, L. (15 November 2024). Development of a geometric modeling strategy for the generation of representative unit cells in 2D braids. Composite Structures, 348, 118503. doi:10.1016/j.compstruct.2024.118503 |
Bruyneel, M., Rajaneesh A., Watanabe T., Urushiyama Y., & Tsuchiyama Y. (12 September 2023). Validation of composite pressure vessels modelling methodology using 2D-shell elements at coupon level [Paper presentation]. 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2023. |
Bruyneel, M. (01 September 2022). Comparison of different numerical methods for braiding process simulation [Paper presentation]. ACOMEN 2022. |
Rajanessh, A., & Bruyneel, M. (01 September 2022). Prediction of the low velocity impact response of plyscaled CFRP laminates [Paper presentation]. ACOMEN 2022, Liège, Belgium. |
Rajaneesh, A., Ponthot, J.-P., & Bruyneel, M. (2022). Strength Prediction of Quasi-Isotropic Scaled Laminates in Open Hole Tension Using Damage Rate Bound Mesomodel. Applied Composite Materials. doi:10.1007/s10443-022-10081-w Dataset: 10.1007/s10443-022-10081-w |
Bruyneel, M. (2021). DEMMOW – detailed model of a morphing wing: development of separate components models. In NAFEMS World Congress 2021. |
Koutla, I., Duysinx, P., Deserranno, C., Jossieaux, J., Bruyneel, M., Eykens, P., & Lopez, C. (17 June 2021). New concepts of lightweight gearbox rear covers made of aluminum and plastic using multi-material topology optimization [Paper presentation]. 14th Wolrd Congress of Structural and Multidisciplinary Optimization, Boulder, Colorado, United States. |
Rajaneesh, A., Ponthot, J.-P., & Bruyneel, M. (2021). High velocity impact response of composite laminates using modified meso-scale damage. International Journal of Impact Engineering, 147, 103701. doi:10.1016/j.ijimpeng.2020.103701 |
Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (2020). Advanced material models for damage and failure analysis of fiber reinforced composite structures. In NAFEMS France Conference. |
Gohy, S., Grappasonni, C., Bruyneel, M., & FRançois, M. (September 2019). Exploitation and enhancement of design flow dedicated to additive manufacturing for an industrial demonstrator [Paper presentation]. ECCOMAS Thematic Conference - II International Conference on Simulation for Additive Manufacturing, Pavie, Italy. |
Bruyneel, M., Banse, O., Fitschy, L., Gohy, S., Buret, J., Caeymax, N., Duponcheel, M., Hendrick, P., & Calut, E. (June 2019). Design and sizing of an airship supported by CAE [Paper presentation]. NAFEMS World Congess, Québec City, Canada. |
Bruyneel, M., Rajaneesh, A., Ponthot, J.-P., & Flores, P. (June 2019). Advances in material modeling for high velocity impacts on composites [Paper presentation]. NAFEMS World Congress, Québec City, Canada. |
Lequesnes, C., & Bruyneel, M. (June 2019). Assess impact of fiber waviness on composite structure performance by finite element modelling [Paper presentation]. NAFEMS World Congress, Québec City, Canada. |
Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (June 2019). On the predictability of composite structures vulnerability against high velocity impacts [Paper presentation]. ASIDIC 2019: Aerospace Structural Impact Dynamics International Conference, Madrid, Spain. |
Bauduin, S., Alarcon Soto, P., Fernandez Sanchez, E. F., Bruyneel, M., Jossieaux, J., Vaassen, J.-M., & Duysinx, P. (May 2019). Misalignment topology optimization with manufacturing constraints [Paper presentation]. 13th World Congress of Structural and Multidisciplinary Optimization, Beijin, China. |
Jetteur, P., Bruyneel, M., & Craveur, J.-C. (2019). Structures en matériaux composites - calculs par éléments finis. DUNOD. |
Bruyneel, M., Strepenne, F., Destoop, V., Pardoen, T., Lequesne, C., Delsemme, J.-P., & De Lumley, T. (03 October 2018). Study of fiber waviness in composite structures supported by simulation [Paper presentation]. International Conference on COmposites, Liège, Belgium. |
Dagruma, J., Nepper, V., Dumont, A., Strepenne, F., Vu Ton Anh, T., Nguyen Dai, Q., Bruyneel, M., & Vroomen, C. (02 October 2018). Development supported by simulation of a test bench for the validation of a composite horizontal tail plane structure [Paper presentation]. International Conference on Composites, Liege, Belgium. |
Flores, P., Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (June 2018). Finite element implementation of a strain rate sensitive model for impact simulation on composites [Paper presentation]. 6th European Conference on Computational Mechanics (ECCM6), Glasgow, United Kingdom. |
Bruyneel, M., Duysinx, P., Fernandez Sanchez, E. F., & Grihon, S. (June 2017). Optimisation of variable thickness composite structures with design rules and manufacturing constraints, based on continuous design variables [Paper presentation]. NAFEMS World Congress, Stockholm, Sweden. |
Bruyneel, M. (2016). DETERMINATION OF THE LOAD BEARING CAPACITY OF COMPOSITE FLANGES FOR AIRCRAFT ENGINE CASING APPLICATION: GENERAL METHODOLOGY AND DESIGN OF TESTING DEVICES SUPPORTED BY SIMULATION. In Proceedings of SAMPE Europe Conferene. |
Lemaire, E., Zein, S., & Bruyneel, M. (August 2015). Optimization of composite structures with curved fiber trajectories. Composite Structures, 131, 895-904. doi:10.1016/j.compstruct.2015.06.040 |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., Lequesne, C., Sopelsa, L., Naito, T., & Urushiyama, Y. (June 2015). Validation of the SAMCEF material models for inter and intralaminar damages in laminated composites made of NCF plies [Paper presentation]. ICCS18 International Conference on Composite Structures, Lisboa, Portugal. |
Bruyneel, M. (May 2015). Damage analysis of composite structures: simulation supported by testing [Paper presentation]. 14th Youth Symposium on Experimental Solid Mechanics, Traunkirchen, Austria. |
Bruyneel, M., Zein, S., Croufier, C., Orefice, F., & Grihon, S. (April 2015). A Two-Step Optimization Approach for Composite Structures Optimization Including Design Rules and Manufacturing Constraints [Paper presentation]. First Pan American Congress on Computational Mechanics - PANACM 2015, Buenos Aires, Argentina. |
Andry, P., Coloos, J., & Bruyneel, M. (2015). Virtualizing the hose design process. In NAFEMS World Congress. |
Brauner, C., Miene, A., Bruyneel, M., Pascon, F., & HJermann, A. (2015). Advances in virtual process chain and connection with online monitoring methods for first time tight manufacturing of thermoset laminated composites. In NAFEMS World Congress 2015. |
Bruyneel, M. (2015). Damage analysis of composite structures: a software editor point of view and illustration on industrial applications [Paper presentation]. DYNCOMP2015 – International Conference on Dynamics of Composite Structures, Arles, France. |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., Lequesne, C., Magneville, B., Maurice, V., Soppelsa, L., Naito, T., & Urushiyama, Y. (2015). Industrial validation of progressive damage models for laminated composite materials and structures: automotive applications. In NAFELS World Congress 2015. |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., Lequesne, C., Magneville, B., Soppelsa, L., McDougall, S., Naito, T., & Urushiyama, Y. (2015). Damage analysis of laminated composites with LMS Samtech SAMCEF: validation on industrial applications. In American Society for Composites 30th technical Conference. |
Bruyneel, M., Grihon, S., & Hudson, L. (2015). Composite structures optimization including non-linear finite element analysis, design and manufacturing considerations. In NAFEMS World Congress. |
Bruyneel, M., Lequesne, C., Magneville, B., Hack, M., Naito, T., & Urushiyama, Y. (2015). A pratical and reliable solution for the damage analysis of composite structures, with applications to automotive. NAFEMS Benchmark Magazine, July. |
Bruyneel, M., Maurice, V., Carrella, D., Naito, T., & Urushiyama, Y. (2015). Impact on laminated composite plates: comparison of test and simulation results obtained with LMS Samtech SAMCEF. In V ECCOMAS Thematic Conference on the Mechanical Response of Composites. |
Bruyneel, M., Naito, T., Urushiyama, Y., & McDougall, S. (2015). Predictive simulations of damage propagation in laminated composite materials and structures with SAMCEF. In SAE World Congress 2015. doi:10.4271/2015-01-0697 |
Delsemme, J.-P., Bruyneel, M., Jetteur, P., Magneville, B., Naito, T., & Urushiyama, Y. (2015). Progressive damage modeling in composites: from aerospace to automotive industry. In Third International Conference on Buckling and Post-buckling Behavior of Composite Laminated Shell Structures. |
Hack, M., Farkas, L., Liefooghe, C., Bruyneel, M., & Sztatecsny, A. (2015). Addressing automotive engineering challenges in composite development by simulation. NAFEMS Benchmark Magazine, July. |
Naito, T., Urushiyama, Y., & Bruyneel, M. (2015). Strength analysis of CFRP composite material considering multiple fracture modes. In SAE World Congress 2015. doi:10.4271/2015-01-0693 |
Zein, S., & Bruyneel, M. (2015). A bilevel integer programming method for blended composite structures optimization. Advances in Engineering Software, 79, 1-12. |
Brauner, C., Miene, A., Bruyneel, M., Pascon, F., & Hermann, A. (2014). Virtual process chain combined with online process monitoring for first time right manufacturing of composite structures. In NAFEMS Seminar: Simulation von Composites – Eine geschlossene Prozesskette?NAFEMS. |
Bruyneel, M., Zein, S., & Grihon, S. (2014). A two-step solution procedure for composite structures optimization including geometric non-linear behaviour, design rules and manufacturing constraints. In Proceedings of the 4rd Aircraft Structural Design Conference 2014. |
Bruyneel, M., Delsemme, J.-P., Goupil, A.-C., Jetteur, P., Lequesne, C., Naito, T., & Urushiyama, Y. (2014). Validation of material models for inter and intra-laminar damage in laminated composites. In Proceedngs of the 2014 ASC 29/US-Japan 16 ASTM D30 Conference. |
Hudson, L., Bruyneel, M., & Lemaire, E. (September 2014). Reducing overdesign with predictive performance and producibility simulation of composite structures [Paper presentation]. 2014 ASC 29/US-Japan 16 ASTM D30 Conference, San Diego, United States. |
Bruyneel, M., Delsemme, J.-P., Goupil, A.-C., Jetteur, P., Lequesne, C., Naito, T., & Urushiyama, Y. (2014). Damage modeling of laminated composites: validation of the inter-laminar damage law of SAMCEF at the coupon level for UD plies. In E. Oñate, J. Oliver and A. Huerta, Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). |
Bruyneel, M., Delsemme, J.-P., Goupil, A.-C., Jetteur, P., Lequesne, C., Naito, T., & Urushiyama, Y. (2014). Damage modeling of woven-fabric laminates with SAMCEF: validation at the coupon level. In Proceedings of the International Conference on Advanced Computational Methods in Engineering – ACOMEN 2014. |
Bruyneel, M., Delsemme, J.-P., Goupil, A.-C., Jetteur, P., Lequesne, C., Naito, T., & Urushiyama, Y. (2014). Damage modeling of laminated composites : validation of the intra-laminar damage law of SAMCEF at the coupon level for UD plies. In proceedings of the European Conference on Composite Material, ECCM16. |
Lemaire, E., Zein, S., DUYSINX, P., & Bruyneel, M. (2014). Optimal design of composite structures with curved fiber trajectories. In Proceedings of the ASMO-UK/ISSMO Conference on Engineering Optimization 2014. |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., Cheruet, A., & Siavoshani, S. (2014). Modeling and simulation of the progressive failure in composites structures for automotive application. In SAE, SAE Technical Paper 2014-01-0962. doi:10.4271/2014-01-0962 |
Bruyneel, M., Zein, S., & Lemaire, E. (2014). Optimization of composite structures with curved fiber trajectories. In Proceedings of the ESTEC European Conference on Spacecraft Structures, Materials and Environmental Testing 2014. |
Zein, S., & Bruyneel, M. (2014). Damage modeling of composites and reliability analysis. In Proceeding of the ESTEC European Conference on Spacecraft Structures, Materials and Environmental Testing 2014. |
Bruyneel, M., Craveur, J.-C., & Gourmelen, P. (2014). Optimisation de structures mécaniques : méthodes numériques et éléments finis. DUNOD. |
Bruyneel, M., Deslemme, J.-P., Jetteur, P., Germain, F., & Boudjemaa, N. (2014). Damage modelling of composites: validation of inter-laminar damage model at the element level. JEC Composites Magazine, 90. |
Tromme, E., Bruls, O., Emonds-Alt, J., Bruyneel, M., Virlez, G., & Duysinx, P. (December 2013). Discussion on the optimization problem formulation of flexible components in multibody systems. Structural and Multidisciplinary Optimization, 48 (6), 1189-1206. doi:10.1007/s00158-013-0952-3 |
Bruyneel, M., Colsoul, F., & Zein, S. (2013). Comparison of gradient-based and gradient-free methods for optimal stacking sequence of composites. In Proceedings of the SAMPE Technical Conference 2013. |
Bruyneel, M., Delsemme, J.-P., & Jetteur, P. (2013). Comparison of damage models in the virtual testing of composites. In proceedings of the SAMPE Technical Conference 2013. |
Pascon, F., Bruyneel, M., & Cheruet, A. (2013). Simulation of the thermoforming process of thermoplastic composite parts. In proceedings of the SAMPE Technical Conference 2013. |
Bruyneel, M., Craveur, G., & Beghin, C. (September 2013). Optimal design of composite structures with design rules and manufacturing constraints, based on continuous design variables [Paper presentation]. ECCOMAS Thematic Conference on the Mechanical Response of Composites, Portugal. |
Delsemme, J.-P., Bruyneel, M., & Jetteur, P. (September 2013). Industrial Implementation of an Advanced Progressive Damage Model of Laminated Composite Material: a SAMCEF Application for Model Parameter Adjustment through Coupon Test Analysis [Paper presentation]. ECCOMAS Thematic Conference on the Mechanical Response of Composites, Portugal. |
Duysinx, P., Guillermo Alonso, M., Gao, T., Remouchamps, A., & Bruyneel, M. (September 2013). Comparison of parameterization schemes for solving the discrete material optimization problem of composite structures [Paper presentation]. COMPOSITES 2103 - IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, San Miguel (Açores), Portugal. |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., & Goupil, A.-C. (2013). Advances in the progressive damage analysis of composites. In NAFEMS World Congress 2013. |
Henrard, C., Bruyneel, M., & Delsemme, J.-P. (2013). Combining mesh refinement and XFEM for fracture mechanics simulations: contradiction or strength? In NAFEMS, proceedings of the NAFEMS World Congress 2013. NAFEMS. |
Lequesne, C., Bruyneel, M., & VAnVlodorp, R. (2013). Structural finite element analysis of a composite catamaran. In NAFEMS World Conress 2013. |
Pascon, F., Brauner, C., Hasselbruch, Krieger, H., & Bruyneel, M. (2013). Finite element analysis of the thermoforming process of thermoplastic composite parts. In NAFEMS World Congress 2013. |
Duysinx, P., Guillermo Alonso, M., Tong, G., & Bruyneel, M. (2013). Comparison of parameterization schemes for solving the discrete material optimization problem of composite structures. In R. Halftka & N. H. KIM (Eds.), Proceeding of the 10th World Congress on Structural And Multidisciplinary Optimization. |
Zein, S., Colsoul, F., & Bruyneel, M. (2013). A novel approach for fibre placement trajectories and fabric draping in CAE. In SAMPE Technical Conference 2013. |
Bruyneel, M., & Zein, S. (2013). A modified Fast Marching Method for defining fiber placement trajectories over meshes. Computers and Structures, 125, 45-52. doi:10.1016/j.compstruc.2013.04.015 |
Bruyneel, M., Beghin, Craveur, G., Sosonkina, M., & Grihon, S. (2012). Stacking sequence optimization for constant stiffness laminates based on a continuous optimization approach. Structural and Multidisciplinary Optimization, 46, 783-794. doi:10.1007/s00158-012-0806-4 |
Bruyneel, M., & Diaconu, C. (2012). Structural composite design: concepts and considerations. In L. Nicolais (Ed.), Wiley Encyclopedia of Composites (pp. 1-10). Wiley. |
Bruyneel, M., Duysinx, P., Fleury, C., & Gao, T. (October 2011). Extensions of the Shape Functions with Penalization Parameterization for Composite-Ply Optimization. AIAA Journal, 49 (10), 2325-2329. doi:10.2514/1.J051225 |
Duysinx, P., Gao, T., Zhang, W., Fleury, C., & Bruyneel, M. (2011). New developments for an efficient solution of the discrete material topology optimization of composite structures. In S. Faester, D. Juul Jensen, B. Ralph, ... B. F. Sorensen (Eds.), Composite materials for structural performance: towards the higher limits (pp. 255-262). Rioskilde, Denmark: Riso. |
Delsemme, J.-P., Bruyneel, M., Jetteur, P., & Duboeuf, F. (29 June 2011). Interface element for delamination simulation. A good usage for accuracy and performances [Paper presentation]. ICCS16 - 16th International Conference on Composite Structures, Porto, Portugal. |
Bruyneel, M. (2011). SFP – A new parameterization based on shape functions for optimal material selection: application to conventional composite plies. Structural and Multidisciplinary Optimization, 43, 17-27. doi:10.1007/s00158-010-0548-0 |
Remouchamps, A., Bruyneel, M., Fleury, C., & Grihon, S. (2011). Application of a bi-level scheme including topology optimization to the design of an aircraft pylon. Structural and Multidisciplinary Optimization, 44, 739-750. doi:10.1007/s00158-011-0682-3 |
Duysinx, P., Emonts-Alt, J., Virlez, G., Bruls, O., & Bruyneel, M. (2010). Advances in optimization of flexible components in mutlibody systems: Application to robot-arms design. In Proceedings of the 5th Asian Conference on Multibody Dynamics. |
Bruyneel, M., Coslon, B., Delsemme, J.-P., Jetteur, P., Grihon, S., & Remouchamps. (2010). Exploiting semi-analytical sensitivities from linear and non-linear finite element analyses for composite panel optimisation. International Journal of Structural Stability and Dynamics, 10, 885-903. doi:10.1142/S0219455410003798 |
Colson, B., Bruyneel, M., Grihon, S., Raick, C., & Remouchamps. (2010). Optimisation methods for advanced design of aircraft panels: a comparison. Optimization and Engineering, 11, 583-596. doi:10.1007/s11081-008-9077-8 |
Grihon, S., Samuelides, M., Merval, A., Remouchamps, Bruyneel, M., & Coslon, B. (2010). Fuselage structure optimization. In E. Kesseler & M. Guenov (Eds.), Advances in Collaborative Civil Aeronautical Multidisciplinary Optimization. AIAA Progress in Astronautics and Aeronautics Series. |
Duysinx, P., Bruyneel, M., & Fleury, C. (2009). SOLUTION OF LARGE SCALE OPTIMIZATION PROBLEMS WITH SEQUENTIAL CONVEX PROGRAMMING. (Danish Center For Applied Mathematics and Mechanics, International Graduate Research School in Applied Mechanics: Advanced Optimization). |
Bruyneel, M., Degenhardt, R., & Delsemme, J.-P. (2009). An industrial solution to simulate post-buckling and damage of composite panels. JEC Composite Magazine, 48. |
Bruyneel, M., Delsemme, J.-P., Jetteur, P., & Germain, F. (2009). Modeling inter-laminar failure in composite structures: illustration on an industrial case study. Applied Composite Materials, 16, 149-162. doi:10.1007/s10443-009-9083-9 |
Bruyneel, M., Granville, D., Heege, A., & Hemelmann, J. (2009). Discussion on wind turbines challenges and innovative solution procedure for advanced modeling. NAFEMS Benchmark Magazine, Janvier. |
Hemelmann, J., Heege, A., Granville, D., & Bruyneel, M. (2009). Towards reliable virtual prototypes of wind turbines. Wind Directions, March. |
Duysinx, P., Van Miegroet, L., Lemaire, E., Bruls, O., & Bruyneel, M. (December 2008). Topology and generalized shape optimisation: why stress constraints are so important? International Journal for Simulation and Multidisciplinary Design Optimization, 2 (4), 253-258. |
Bruyneel, M. (2008). Optimization of laminated composite structures: problems, solution procedures and applications. In L. Durand (Ed.), Composite Materials Research Progress. Nova Science Publishers. |
Bruyneel, M., Colson, B., Jetteur, P., Raick, C., Remouchamps, A., & Grihon, S. (2008). Recent progress in the optimal design of composite structures: industrial solution procedures on case studies. International Journal for Simulation and Multidisciplinary Design Optimization, 2, 283-288. |
Bruyneel, M., Colson, B., & Remouchamps, A. (2008). Discussion on some convergence problems in buckling optimization. Structural and Multidisciplinary Optimization, 35, 181-186. doi:10.1007/s00158-007-0129-z |
Bruyneel, M., & Granville, D. (2008). An industrial solution to analyze delamination. JEC Composites Magazine, 41. |
Colson, B., Bruyneel, M., Grihon, S., Jetteur, P., & Remouchamps, A. (2008). Optimization of aircraft composite panels with non linear finite element analysis and sensitivities. NAFEMS Benchmark Magazine, June. |
Duysinx, P., Fleury, C., Van Miegroet, L., Lemaire, E., Bruls, O., & Bruyneel, M. (2008). Stress constrained topology and shape optimization : Specific character and large scale optimization algorithms. In Proceedings of the 8th World Congress on Computational Mechanics (WCCM). |
Jetteur, P., & Bruyneel, M. (2008). Advanced capabilities for the simulation of membrane and inflatable space structures using SAMCEF. In E. Onate (Ed.), Textile Composites and Inflatable Structures II (pp. 211-231). Springer. |
Mu, Q., Remouchamps, A., & Bruyneel, M. (2008). SAMTECH’s Software: from optimisation of very large composite aircrafts to detailed damage in composite structures analysis. Journal of Materials Engineering, 57. |
Krog, L., Bruyneel, M., Remouchamps, A., & Fleury, C. (2007). COMBOX: A Distributed Computing Process for Pre-Sizing of Composite Aircraft Box Structures [Paper presentation]. 10th SAMTECH Users Conference, Liège, Belgium. |
Bruyneel, M., Jetteur, P., Granville, D., Langlois, S., & Fleury, C. (November 2006). An augmented Lagrangian optimization method for inflatable structures analysis problems. Structural and Multidisciplinary Optimization, 32 (5), 383-395. doi:10.1007/s00158-006-0036-8 |
Bruyneel, M. (2006). A general and effective approach for the optimal design of fibers reinforced composite structures. Composites Science and Technology, 66, 1303-1314. doi:10.1016/j.compscitech.2005.10.011 |
Bruyneel, M., & Duysinx, P. (2006). Note on singular optima in laminates design problems. Structural and Multidisciplinary Optimization, 31 (2), 156-159. doi:10.1007/s00158-005-0569-2 |
Rion, V., & Bruyneel, M. (2006). Topology optimization of membranes made of orthotropic material. In N. Moes & G. Desaxcé, Collection of Papers from Prof. Nguyen Dang Hung’s Former Students (pp. 107-120). Vietnam National University-HCM Publishing House. |
Bruyneel, M., & Duysinx, P. (2005). Note on topology optimization of continuum structures including self-weight. Structural and Multidisciplinary Optimization, 29 (4), 245-256. doi:10.1007/s00158-004-0484-y |
Duysinx, P., Bruyneel, M., & Fleury, C. (2003). Solution of topology optimization problems with sequential convex programming [Paper presentation]. Lecture présentée aux cours de troisième cycle"Advanced Topics in strucural Optimizaion/ Topology Design-Theory and Practice, Lyngby, Denmark. |
Bruyneel, M. (2002). Schémas d’approximation pour la conception optimale de structures en matériaux composites [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/184948 |
Bruyneel, M., Duysinx, P., & Fleury, C. (October 2002). A family of MMA approximations for structural optimization. Structural and Multidisciplinary Optimization, 24 (4), 263-276. doi:10.1007/s00158-002-0238-7 |
Bruyneel, M., & Duysinx, P. (2002). Selection of approximation schemes in topology optimization. In M. Hogge, Proceedinsg of the ACOMEN 2002, 2nd International Conference on Advanced Computational Methods in Engineering. |
Bruyneel, M., & Fleury, C. (2002). Composite structures optimization using sequential convex programming. Advances in Engineering Software, 33 (7-10), 697-711. doi:10.1016/S0965-9978(02)00053-4 |
Duysinx, P., & Bruyneel, M. (2002). Recent Progress In Preliminary Design Of Mechanical Components With Topology Optimization. In P. Chedmail, G. Cognet, C. Fortin, C. Mascle, ... J. Pegna, Integrated Design and Manufacturing in Mechanical Engineering. Kluwer. |
Bruyneel, M., & Duysinx, P. (2001). Topology optimization with self-weight loading: (un-expected) problems and solutions. In M. P. Bendsoe, N. Olhoff, ... J. Rassmussen, Proceedings of the 2nd Max Planck Workshop on Engineering Design Optimization. |
Bruyneel, M., Duysinx, P., & Fleury, C. (July 2001). A family of MMA approximations for structural optimization [Paper presentation]. Third ASMO-UK/ISSMO conference on Engineering Design Optimization, Harrogate, United Kingdom. |
Bruyneel, M., Duysinx, P., & Fleury, C. (2001). Composite structures design for strength and stiffness with respect to ply thickness and/or fibers orientation. In G. D. CHENG, Proceedings of the 4th World Congress of Structural and Multidisciplinary Optimization WCSMO4. |
Duysinx, P., Nguyen, V. H., Bruyneel, M., & Fleury, C. (2001). Estimating diagonal second order terms in structural approximations with quasi-Cauchy techniques. In G. D. CHENG, Proceedings of the 4th World Congress of Structural and Multidisciplinary Optimization WCSMO4. |
Bruyneel, M., & Fleury, C. (2001). The key role of fibers orientations in the optimization of composite structures. (OA_58). https://orbi.uliege.be/handle/2268/92822 |
Bruyneel, M., Vermaut, O., & Fleury, C. (1998). Reliable Approximation Schemes for Composite Structures Optimization". In R. Van Keer, B. Verhegghe, M. Hogge, ... E. Noldus (Eds.), ACOMEN ’98 : an international conference on advanced computational methods in engineering : Ghent, 2-4 september 1998 (pp. 705-712). Maastricht, Netherlands: Shaker publishing. |
Bruyneel, M., Vermaut, O., Duysinx, P., & Fleury, C. (1998). Enhanced Approximation Schemes for Classical Optimization Algorithm. (TEC-T31-01). Brite-Euram COMPOPT Project. https://orbi.uliege.be/handle/2268/98709 |