Publications and communications of Jean-François Demonceau

Articles in scientific journals with peer reviewing

Saufnay, L., Beyer, A., Jaspart, J.-P., & Demonceau, J.-F. (April 2023). Experimental and Numerical Investigations on Closely Spaced Built-Up Angle Members. Journal of Structural Engineering, 149 (4). doi:10.1061/jsendh.steng-11642

Golea, T., Corman, A., Mathieu, J., Duchêne, Y., Jaspart, J.-P., & Demonceau, J.-F. (February 2023). An innovative mechanical model for structural steel joints. Engineering Structures, 277. doi:10.1016/j.engstruct.2022.115459

Jaspart, J.-P., Corman, A., & Demonceau, J.-F. (November 2022). Characterization of unstiffened column webs in transverse compression in steel beam-to-column joints. Thin-Walled Structures, 180 (109848). doi:10.1016/j.tws.2022.109848

Bezas, M.-Z.* , Jaspart, J.-P., Vayas, I., & Demonceau, J.-F.*. (September 2022). New Consistent Set of Design Equations for Equal‐leg Angle Sections and Members. ce/papers, 5 (4), 874-881. doi:10.1002/cepa.1830

Golea, T., Jaspart, J.-P., & Demonceau, J.-F. (September 2022). Characterisation of the behaviour of beam-to-column steel joints up to failure. Advanced Steel Construction, 18. doi:10.18057/ijasc.2022.18.3.5

D'Antimo, M., Latour Massimo, & Demonceau, J.-F. (May 2022). Drop-weight impact tests on free from damage beam to column connections. Journal of Constructional Steel Research, 192. doi:10.1016/j.jcsr.2022.107215

Bezas, M.-Z., Demonceau, J.-F., Vayas, I., & Jaspart, J.-P. (February 2022). Design rules for equal-leg angle members subjected to compression and bending. Journal of Constructional Steel Research, 189, 107092. doi:10.1016/j.jcsr.2021.107092

Bezas, M.-Z., Jaspart, J.-P., Vayas, I., & Demonceau, J.-F. (February 2022). Design recommendations for the stability of transmission steel lattice towers. Engineering Structures, 252 (C), 113603. doi:10.1016/j.engstruct.2021.113603

Corman, A., Demonceau, J.-F., & Jaspart, J.-P. (February 2022). Analytical model for the panel zone resistance in welded steel beam-to-column joints. Journal of Constructional Steel Research, 189 (107099). doi:10.1016/j.jcsr.2021.107099

Corman, A., Demonceau, J.-F., & Jaspart, J.-P. (2022). Characterization of the panel zone shear behaviour in steel beam-to-column joints. Steel Construction. doi:10.1002/stco.202100052

Geuzaine, M., Demonceau, J.-F., Jaspart, J.-P., & Denoël, V. (2022). Influence of a small flexibility of connections on the elastic structural response of frames. Journal of Structural Engineering, 148 (5). doi:10.1061/(ASCE)ST.1943-541X.0003303

Bezas, M.-Z., Demonceau, J.-F., Vayas, I., & Jaspart, J.-P. (October 2021). Classification and cross-section resistance of equal-leg rolled angle profiles. Journal of Constructional Steel Research, 185, 106842. doi:10.1016/j.jcsr.2021.106842

Bezas, M.-Z., Demonceau, J.-F., Vayas, I., & Jaspart, J.-P. (01 September 2021). Compression Tests on Large Angle Columns in High Strength Steel. ce/papers, 4 (2-4), 1523-1529. doi:10.1002/cepa.1451

Bezas, M.-Z., Demonceau, J.-F., Vayas, I., & Jaspart, J.-P. (February 2021). Experimental and numerical investigations on large angle high strength steel columnns. Thin-Walled Structures, 159. doi:10.1016/j.tws.2020.107287

Bahaz, A., Amara, S., Jaspart, J.-P., & Demonceau, J.-F. (2021). NUMERICAL ANALYSIS AND EVALUATION OF EFFECTIVE SLAB WIDTH OF COMPOSITE CONTINUOUS BEAMS WITH SEMI-RIGID JOINT. Advanced Steel Construction, 17 (4), 331-339. doi:10.18057/IJASC.2021.17.4.1

D'Antimo, M., Latour, M., Cavallaro, G. F., Jaspart, J.-P., Ramhormozian, S., & Demonceau, J.-F. (2020). Short- and long- term loss of preloading in slotted bolted connections. Journal of Constructional Steel Research, 167, 105956. doi:10.1016/j.jcsr.2020.105956

Corman, A., Jaspart, J.-P., & Demonceau, J.-F. (09 August 2019). Resistance of the beam-to-column component "column web panel in shear". Steel Construction, 12 (3), 222-230. doi:10.1002/stco.201900020

D'Antimo, M., Latour, M., Rizzano, G., & Demonceau, J.-F. (July 2019). Experimental and numerical assessment of steel beams under impact loadings. Journal of Constructional Steel Research, 158, 230-247. doi:10.1016/j.jcsr.2019.03.029

Demonceau, J.-F., Cerfontaine, F., & Jaspart, J.-P. (2019). Resistance of steel and composite connections under combined axial force and bending including group effects: analytical procedures and comparison with laboratory tests. Journal of Constructional Steel Research, 160. doi:10.1016/j.jcsr.2019.05.030

Demonceau, J.-F., & Ciutina, A. (2019). Characterisation of beam-to-column steel-concrete composite joints beyond current Eurocode provisions. Structures. doi:10.1016/j.istruc.2019.01.014

Latour, M., Rizzano, G., D'Antimo, M., Demonceau, J.-F., & Jaspart, J.-P. (February 2018). Bearing strength of shear connections for tubular structures: An analytical approach. Thin-Walled Structures, 127, 180-199. doi:10.1016/j.tws.2018.01.043

Bianca Francavilla, A., Latour, M., Rizzano, G., Jaspart, J.-P., & Demonceau, J.-F. (2018). On the robustness of earthquake-resistant moment-resistant frames: influence of innovative beam-to-column joints. Open Construction and Building Technology Journal, 12. doi:10.2174/1874836801812010101

Bucmys, Z., Daniunas, A., Jaspart, J.-P., & Demonceau, J.-F. (2018). A component method for cold-formed steel beam-to-column bolted gusset plate joints. Thin-Walled Structures, 123, 520-527. doi:10.1016/j.tws.2016.10.022

D'Antimo, M., Latour, M., Rizzano, G., Demonceau, J.-F., & Jaspart, J.-P. (2018). Preliminary Study on Beam-To-Column Joints Under Impact Loading. The Open Construction and BuildingTechnology Journal, 12, 112-123. doi:10.2174/1874836801812010112

D'Antimo, M., Zimbru, M., D'Aniello, M., Demonceau, J.-F., Jaspart, J.-P., & Landolfo, R. (2018). Preliminary Finite Element Analyses on Seismic Resistant FREE from DAMage Beam to Column Joints under Impact Loading. Key Engineering Materials, 763, 592-599. doi:10.4028/www.scientific.net/KEM.763.592

Colomer, C. S., Hamra, L., D'Antimo, M., Demonceau, J.-F., & Feldmann, M. (November 2017). Determination of loading scenarios on buildings due to column damage. Structures, Volume 12, 1-12. doi:10.1016/j.istruc.2017.06.005

D'Antimo, M., Demonceau, J.-F., Jaspart, J.-P., Latour, M., & Rizzano, G. (November 2017). Experimental and theoretical analysis of shear bolted connections for tubular structures. Journal of Constructional Steel Research, 138, 264-282. doi:10.1016/j.jcsr.2017.07.015

Demonceau, J.-F., Comeliau, L., Hoang, V. L., & Jaspart, J.-P. (2017). How can a steel structure survive to impact loading? Numerical and analytical investigations. Open Civil Engineering Journal, 11. doi:10.2174/1874149501711010434

Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (November 2016). Use of long bolts for beam-to-concrete-filled rectangular hollow section column joints in seismic-resistant frames. Steel Construction, 9 (4), 305-314. doi:10.1002/stco.201610037

Haremza, C., Santiago, A., Demonceau, J.-F., Jaspart, J.-P., & Simoes da Silva, L. (2016). Composite joints under M-N at elevated temperatures. Journal of Constructional Steel Research, 124, 173-186. doi:10.1016/j.jcsr.2016.05.012

Hamra, L., Demonceau, J.-F., & Denoël, V. (December 2015). Pressure-impulse diagram of a beam developing non-linear membrane action under blast loading. International Journal of Impact Engineering, 86, 188–205. doi:10.1016/j.ijimpeng.2015.07.003

Hoang, V. L., Nguyen, D.-H., Jaspart, J.-P., & Demonceau, J.-F. (December 2015). An overview of the plastic‑hinge analysis of 3D steel frames. Asia Pacific Journal on Computational Engineering, 2:4.

Bennacer, M. A., Berouai, A., Kriker, A., & Demonceau, J.-F. (October 2015). Analytical model for composite joints under sagging moment. Engineering Structures, 101, 399-411. doi:10.1016/j.engstruct.2015.07.024

Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (June 2015). Extended end-plate to concrete- filled rectangular column joint using long bolts. Journal of Constructional Steel Research, 113. doi:10.1016/j.jcsr.2015.06.001

Couchaux, M., Demonceau, J.-F., & Weynand, K. (2015). Calcul d'un assemblage par platine comportant quatre boulons par rangée. Construction Métallique, 2.

Hoang, V. L., Jaspart, J.-P., Tran Xuan-Hoang, & Demonceau, J.-F. (2015). Elastic behaviour of bolted connection between cylindrical steel structure and concrete foundation. Journal of Constructional Steel Research, 115. doi:10.1016/j.jcsr.2015.08.024

Huvelle, C., Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (2015). Complete analytical procedure to assess the response of a frame submitted to a column loss. Engineering Structures, 86, 33-42. doi:10.1016/j.engstruct.2014.12.018

Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (2014). Hammer head beam solution for beam-to-column joints in seismic resistant building frames. Journal of Constructional Steel Research. doi:10.1016/j.jcsr.2014.08.001

Hoang, V. L., Demonceau, J.-F., & Jaspart, J.-P. (2014). Resistance of through-plate component in beam-to-column joints with circular hollow columns. Journal of Constructional Steel Research, 92. doi:10.1016/j.jcsr.2013.10.001

Hoang, V. L., Demonceau, J.-F., & Jaspart, J.-P. (September 2013). Proposal of a simplified analytical approach for the characterisation of the end-plate component in circular tube connection. Journal of Constructional Steel Research, 90. doi:10.1016/j.jcsr.2013.07.031

Demonceau, J.-F., & Jaspart, J.-P. (2013). A NEW SIMPLIFIED ANALYTICAL DESIGN METHOD FOR STEEL AND COMPOSITE SWAY FRAMES. Journal of Constructional Steel Research. doi:10.1016/j.jcsr.2013.01.006

Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (March 2013). Behaviour of bolted flange joints in tubular structures under monotonic, repeated and fatigue loadings I: Experimental tests. Journal of Constructional Steel Research, 85. doi:10.1016/j.jcsr.2013.02.011

Tondini, N., Hoang, V. L., Demonceau, J.-F., & Franssen, J.-M. (2013). Experimental and numerical investigation of high-strength steel circular columns subjected to fire. Journal of Constructional Steel Research, 80, 57-81. doi:10.1016/j.jcsr.2012.09.001

Coméliau, L., Rossi, B., & Demonceau, J.-F. (August 2012). Robustness of steel and composite buildings suffering the dynamic loss of a column. Structural Engineering International, 22 (3), 323-329. doi:10.2749/101686612X13363869853059

Demonceau, J.-F., Coméliau, L., & Jaspart, J.-P. (August 2011). Robustness of building structures - recent developments and adopted strategy. Steel Construction, 4/2011, 166-170.

Hoang, V. L., Demonceau, J.-F., Ly, D. P. L., & Rossi, B. (June 2011). Field of application of high strength steel circular tubes for steel and composite columns from an economic point of view. Journal of Constructional Steel Research, 67 (6), 1001-1021. doi:10.1016/j.jcsr.2011.01.008

Pucinotti, R., Bursi, O., & Demonceau, J.-F. (2011). Post earthquake fire and seismic performance of welded steel-concrete composite beam-to-column joints. Journal of Constructional Steel Research, 67, 1358-1375. doi:10.1016/j.jcsr.2011.03.006

Demonceau, J.-F., & Jaspart, J.-P. (September 2010). Experimental test simulating a column loss in a composite frame. Advanced Steel Construction, 6 (Number 3), 891-913.

Kuhlmann, U., Rölle, L., Jaspart, J.-P., & Demonceau, J.-F. (August 2010). Anforderungen an Stahl- und Verbundknoten bei Stützenausfall in einem Rahmentragwerk. Stahlbau, 8 (August 2010), 565-579. doi:10.1002/stab.201001352

Demonceau, J.-F., Hanus, F., Jaspart, J.-P., & Franssen, J.-M. (December 2009). Behaviour of single sided composite joints at room temperature and in case of fire after an earthquake. International Journal of Steel Structures, 9 (4), 329-342.

Demonceau, J.-F., Jaspart, J.-P., Klinkhammer, R., Weynand, K., Labory, F., & Cajot, L.-G. (2008). Recent developments on composite connections. Steel Construction, 1, 71-76.

Jaspart, J.-P., & Demonceau, J.-F. (2008). European design recommendations for simple joints in steel structures. Journal of Constructional Steel Research, 64 (7-8), 822-832. doi:10.1016/j.jcsr.2008.01.039

Demonceau, J.-F., Jaspart, J.-P., & Maquoi, R. (June 2005). Design of composite sway building frames for global instability. Journal of Engineering Mechanics, 131 (6), 641-653. doi:10.1061/(ASCE)0733-9399(2005)131:6(641)

Demonceau, J.-F., & Jaspart, J.-P. (2004). Recent investigations on composite sway frames. Journal of Civil Engineering and Management, X (1), 15-23. doi:10.1080/13923730.2004.9636281

Scientific congresses and symposiums

Published communications

Golea, T., Santos, A. F., Jaspart, J.-P., Latour, M., Santiago, A., & Demonceau, J.-F. (14 September 2022). Robustness of Steel Frame Structures Equipped with FREEDAM Dissipative Joints. ce/papers, 5 (4), 210-217. doi:10.1002/cepa.1747

Jaspart, J.-P., Corman, A., & Demonceau, J.-F. (14 September 2022). Mechanical Properties of the Component “Column Web in Compression” in Steel Beam‐to‐column Joints. ce/papers, 5 (4), 242-250. doi:10.1002/cepa.1752

Saufnay, L., Tibolt, M., Jaspart, J.-P., & Demonceau, J.-F. (14 September 2022). The Beneficial Influence of the Roller‐straightening Process on the Bearing Capacity of Steel Columns. ce/papers, 5 (4), 889-897. doi:10.1002/cepa.1832

Bahaz, A., Sala, A., & Demonceau, J.-F. (2022). Numerical evaluation for the effective slab width of continuous composite beams. In Materials Todays: Proceedings. Elsevier. doi:10.1016/j.matpr.2022.03.001

Corman, A., Demonceau, J.-F., & Jaspart, J.-P. (01 September 2021). Analytical model for the prediction of the plastic shear resistance of the panel zone in welded joints. ce/papers, 4 (2-4), 995-1005. doi:10.1002/cepa.1389

D'Antimo, M., Latour, M., & Demonceau, J.-F. (2021). Dissipative joints under impact loadings. In Proceedings of the Eurosteel 2021 conference.

Saufnay, L., Jaspart, J.-P., & Demonceau, J.-F. (01 September 2021). Economic benefit of high strength steel sections for steel structures. ce/papers, 4 (2-4), 1543-1550. doi:10.1002/cepa.1454

Beyer, A., Bureau, A., Jaspart, J.-P., Demonceau, J.-F., & Bezas, M.-Z. (2021). Torsional, flexural and torsional-flexural buckling of angle section members - an analytical approach. In Modern trends in research on steel, aluminium and composite structures. Taylor and Francis Group.

Demonceau, J.-F. (2021). Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond. In Modern trends in research on steel, aluminium and composite structures (pp. 14-24). Taylor and Francis Group.

Skoric, V., Demonceau, J.-F., Jaspart, J.-P., Weynand, K., & Pensis, O. (2019). Optimization of a transfer carriage along crane girders. In Y. S. Choo, Proceedings of the 17th International Symposium on Tubular Structures(ISTS17). Proceedings of the 17th International Symposium on Tubular Structures(ISTS17). doi:10.3850/978-981-11-0745-0_024-cd

Jaspart, J.-P., Weynand, K., Demonceau, J.-F., & Wertz, F. (2019). CEN technical specification for design of hollow section joints according to the component method. In Proceedings of the ISTS17 conference.

D'Antimo, M., Demonceau, J.-F., & Latour, M. (2019). FEASIBILITY STUDY ON THE USE OF SLIDING HINGE JOINTS FOR RESILIENT STRUCTURES. In XXVII Congresso del Collegio dei Tecnici dell’Acciaio (CTA), Bologna 3-5 October 2019.

Corman, A., Jaspart, J.-P., & Demonceau, J.-F. (16 September 2019). Resistance of the beam-to-column component "column web panel in shear" - numerical and analytical investigations. ce/papers, 3 (3-4), 325-330. doi:10.1002/cepa.1061

Jaspart, J.-P., Corman, A., & Demonceau, J.-F. (2019). Ductility assessment of structural steel and composite joints. In J. M. Wald, Frantisek (Ed.), Stability and Ductility of Steel Structures 2019 (pp. 564-569). Taylor & Francis. doi:10.1201/9780429320248

D'Antimo, M., Latour, M., Jaspart, J.-P., & Demonceau, J.-F. (September 2019). Numerical and experimental investigation of simply supported steel beams under drop-weight impact tests. ce/papers, 3 (Issue3-4). doi:10.1002/cepa.1137

Demonceau, J.-F., D'Aniello, M., Landolfo, R., & Jaspart, J.-P. (2019). European Prequalification of joint solutions for steel structures subjected to seismic actions - bolted unstiffened extended end-plate beam-o-column joints. In Proceeding of the SECED 2019 conference.

Bezas, M.-Z., Tibolt, M., Jaspart, J.-P., & Demonceau, J.-F. (2019). Critical assessment of the design of an electric transmission tower. In 9th International Conference on Steel and Aluminium Structures, Bradford 3-5 July 2019.

D'Antimo, M., Demonceau, J.-F., & Jaspart, J.-P. (2018). Behaviour of an innovative joint solution under impulsive loading. In R. Caspeele, L. Taerwe, ... D. Frangopol, Life-Cycle Analysis and Assessment in Civil Engineering: towards an integrated vision (pp. 2201-2208).

Demonceau, J.-F., D'Antimo, M., & Jaspart, J.-P. (2018). Robustness of steel structures subjected to a column loss scenario. In R. Caspeele, L. Taerwe, ... D. Frangopol, Life-Cycle Analysis and Assessment in Civil Engineering: towards an integrated vision (pp. 2177-2183).

Demonceau, J.-F., & Ciutina, A. (2018). Characterisation of beam-to-column joints beyond current Eurocode provisions. In V. Albero, A. Espinos, C. Ibanez, A. Lapuebla, ... M. Romero, Proccedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (pp. 513-520). Valencia, Spain: Universitat Politecnica de Valencia Editorial.

Bahaz, A., Amara, S., Jaspart, J.-P., & Demonceau, J.-F. (2018). Analysis of the behaviour of semi rigid steel end plate connections. In 2nd international congress on materials and structural stability (CMSS-2017) (MATEC Web of conferences). doi:10.1051/matecconf/201714902058

D'Antimo, M., Latour, M., Rizzano, G., Demonceau, J.-F., & Jaspart, J.-P. (2017). PRELIMINARY STUDY ON BEAM-TO-COLUMN JOINTS UNDER IMPACT LOADING. In Proceedings CTA 2017.

Demonceau, J.-F., Vanvinckenroye, H., D'Antimo, M., Denoël, V., & Jaspart, J.-P. (2017). Beam-to-column joints, column bases and joint components under impact loading. In Proceeding of Eurosteel 2017 conference. Ernst & Sohn.

Francavilla, A., Latour, M., Rizzano, G., Demonceau, J.-F., & Jaspart, J.-P. (2017). Influence of beam-to-column joints on the robustness of earthquake-resistant moment-resistant frames. In Proceeding of Eurosteel 2017 conference. Ernst & Sohn.

Tondini, N., & Demonceau, J.-F. (2017). Numerical analysis of the fire resistance of high-strength steel circular columns. In Proceeding of Eurosteel 2017 conference. Ernst & Sohn.

Bahaz, A., Amara, S., Nessi, H., Jaspart, J.-P., & Demonceau, J.-F. (2017). Finite element Analysis of Semi Rigid End Plate Steel Joints Under Static Loading. In Proceeding of the International seminar of the apport of the simulation in technological innovation.

D'Antimo, M., Demonceau, J.-F., Latour, M., Rizzano, G., & Jaspart, J.-P. (2017). Experimental investigation of the creep effect on prestressed bolts used in innovative friction connections. In Experimental investigation of the creep effect on prestressed bolts used in innovative friction connections.

Armenante, V., D'Antimo, M., Demonceau, J.-F., Jaspart, J.-P., Latour, M., & Rizzano, G. (2016). ANALYTICAL PREDICTION OF THE BEARING RESISTANCE OF BOLTED CONNECTIONS FOR TUBULAR RACKING STRUCTURES. In THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES, Timisoara 30 May-01 June 2016.

D'Antimo, M., Demonceau, J.-F., Jaspart, J.-P., Latour, M., & Rizzano, G. (2016). INFLUENCE OF LOCAL BUCKLING ON THE SHEAR RESISTANCE OF BOLTED CONNECTIONS FOR TUBULAR RACKING STRUCTURES. In THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES, Timisoara 30 May-01 June 2016.

Armenante, V., Latour, M., Rizzano, G., Demonceau, J.-F., & Jaspart, J.-P. (2015). A new proposal for predicting the bearing resistance of bolted connections for tubular racking structures. In Proceeding of the XXV Congresso CTA.

Hoang, V. L., Demonceau, J.-F., & Jaspart, J.-P. (2015). Beam to concrete-filled rectangular hollow section column joints using long bolts. In Proceedings of the 15th international symposium on tubular structures - ISTS15. Balkema (Taylor & Francis Group). doi:10.1201/b18410-17

Hamra, L., Demonceau, J.-F., & Denoël, V. (2015). Analytical procedure to derive P-I diagram of a beam under explosion. In Proceeding of the IABSE Workshop - Safety, Robustness and Condition Assessments of Structures (pp. 62-69). doi:10.2749/222137815815622681

Hoffman, N., Kuhlmann, U., Demonceau, J.-F., Jaspart, J.-P., Colomer, C., Hoffmeister, B., Zandonini, R., Hjiaj, M., & Mohler, C. (2015). Robust impact design of steel and composite building structures. In Proceeding of the IABSE Workshop - Safety, Robustness and Condition Assessments of Structures (pp. 38-45). doi:10.2749/222137815815622663

Hoffmann, N., Kuhlmann, U., Demonceau, J.-F., Jaspart, J.-P., Baldassino, N., Freddi, F., & Zandonini, R. (2015). Robust impact design of steel and composite building structures: the alternate load path approach. In Proceeding of the IABSE Workshop - Safety, Robustness and Condition Assessments of Structures (pp. 46-53). doi:10.2749/222137815815622654

D'Antimo, M., Demonceau, J.-F., Jaspart, J.-P., Latour, M., & Rizzano, G. (2015). Shear bolted connections for tubular racking structures: Numerical analysis. In Proceeding of XXV Congresso CTA: Salerno 1-3 ottobre 2015.

D'Antimo, M., Demonceau, J.-F., Jaspart, J.-P., Latour, M., & Rizzano, G. (2015). Experimental investigation of shear bolted connections for tubular racking structures. In XXV Congresso CTA: Salerno 1-3 ottobre 2015.

Hamra, L., Demonceau, J.-F., & Denoël, V. (2014). Pressure-impulse diagram of a beam under explosion - Influence of the indirectly affected part. In R. Landolfo & F. Mazzolani (Eds.), Proceeding of the 7th European conference on steel and composite structures (Eurosteel 2014). Bruxelles, Belgium: ECCS.

Demonceau, J.-F., Hoang, V. L., & Jaspart, J.-P. (2014). BOLTED END-PLATE BEAM-TO-COLUMN JOINTS USING HAMMERHEAD BEAMS: Experimental tests and proposal of design guidelines. In R. Landolfo & F. Mazzolani (Eds.), Proceeding of the 7th European conference on steel and composite structures (Eurosteel 2014). Bruxelles, Belgium: ECCS.

Hoang, V. L., Jaspart, J.-P., & Demonceau, J.-F. (2014). CIRCULAR TUBE COLUMNS IN HIGH STRENGTH STEEL: Economical solutions for building frames. In R. Landolfo & F. Mazzolani (Eds.), Proceeding of the 7th European conference on steel and composite structures (Eurosteel 2014). Bruxelles, Belgium: ECCS.

Huvelle, C., Jaspart, J.-P., & Demonceau, J.-F. (2014). How to check analytically the robustness of a building submitted to a column loss - A premiere. In Proceedings of Eurosteel 2014 conference.

Huvelle, C., Jaspart, J.-P., & Demonceau, J.-F. (2013). Robustness of steel building structures following a column loss. In IABSE Workshop Helsinki 2013 "Safety, Failures and Robustness of Large Structures" Report.

Demonceau, J.-F., Haremza, C., Jaspart, J.-P., Santiago, A., & Simoes da Silva, L. (2013). Composite joints under M-N at elevated temperatures - Experimental investigations and analytical model. In Proceeding of the Composite Construction VII conference (pp. 387). doi:10.1061/9780784479735.029

Jaspart, J.-P., & Demonceau, J.-F. (2012). A "new" design requirement: the mitigation of the progressive collapse of buildings under exceptional loading. In Proceedings of the First International Conference of Civil Engineering.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2012). Innovative bolted beam-to-column joints for seismic resistant building frames. In D. Dubina & D. Grecea (Eds.), CONNECTIONS VII proceedings (pp. 199-208). ECCS.

Weynand, K., Oerder, R., & Demonceau, J.-F. (2012). Resistance tables for standardized joints in accordance with EN 1993-1-8. In D. Dubina & D. Grecea (Eds.), CONNECTIONS VII proceedings (pp. 23-34). ECCS.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2011). Robustness of building frames further to a column loss - Substructure approach with account of dynamic effects. In EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures - Proceedings (pp. 2481-2486). ECCS.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2011). Non-dissipative joints in seismic resistant building frames - Bolted beam-to-column joints. In EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures - Proceedings (pp. 423-428). ECCS.

Demonceau, J.-F., Coméliau, L., & Jaspart, J.-P. (2011). ROBUSTNESS OF BUILDING STRUCTURES - Recent developments and adopted strategy. In Eurosteel 2011 - 6th European Conference on Steel and Composite Structures - Proceedings (pp. 2475-2480). ECCS.

Demonceau, J.-F., Jaspart, J.-P., Weynand, K., Oerder, R., & Muller, C. (2011). CONNECTIONS WITH FOUR BOLTS PER HORIZONTAL ROW - Application of Eurocode 3. In Eurosteel 2011 - 6th European Conference on Steel and Composite Structures - Proceedings (pp. 567-572). ECCS.

Jaspart, J.-P., Demonceau, J.-F., & Coméliau, L. (2011). Robustness of steel and composite building structures. In 7th National conference on steel structures proceedings (pp. 71-86).

Hoang, V. L., Demonceau, J.-F., & Rossi, B. (2011). Use of high strength steel tubular columns in structures: economic study. In Progress in steel and composite structures : ICMS2011, Wroclaw 15-17 June 2011 (pp. 168-169).

Demonceau, J.-F., & Jaspart, J.-P. (2010). M-N interaction in beam-to-column joints - Development of a design model. In A. Zingoni (Ed.), Proceedings of the SEMC 2010 International Conference.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2010). Robustness of steel and composite buildings under impact loading. In E. Batista, P. Vellasco, ... L. de Lima (Eds.), Proceedings of the SDSS'Rio 2010 conference (pp. 393-400).

Demonceau, J.-F., Weynand, K., Jaspart, J.-P., & Müller, C. (2010). Application of Eurocode 3 to steel connections with four bolts per horizontal row. In E. Batista, P. Vellasco, ... L. de Lima (Eds.), Proceedings of the SDSS'Rio 2010 conference (pp. 199-206).

Demonceau, J.-F., Ly, D. P. L., Coméliau, L., & Jaspart, J.-P. (2010). New simplified analytical method for the Prediction of global stability of steel and composite sway frames. In Proceedings of the annaual stability conference, 2010 (pp. 233-252). United States: SSRC.

Ly, D. P. L., Demonceau, J.-F., Jaspart, J.-P., & Landolfo, R. (2009). Proposed design rules for iron columns reinforced by FRP. In F. M. Mazzolani, Protection of historical buildings, Prohitech 09.

Demonceau, J.-F., & Jaspart, J.-P. (2009). Experimental and analytical investigations on the response of structural building frames further to a column loss. In Proceedings of ASCE structure congress 2009. doi:10.1061/41031(341)199

Demonceau, J.-F., & Jaspart, J.-P. (2008). Experimental and analytical investigations on the behaviour of building frames further to a column loss. In F. Mazzolani, E. Mistakidis, R. P. Borg, M. Byfield, G. De Matteis, D. Dubina, M. Indirli, A. Mandara, J. P. Muzeau, F. Wald, ... Y. Wang, Urban Habitat Constructions under Catastrophic Events (pp. 300-305).

Ly, D. P. L., Jaspart, J.-P., Demonceau, J.-F., & Landolfo, R. (2008). Experimental and numerical investigations on iron columns reinforced by FRP under axial compression. In T. Camelbeeck, H. Degée, G. Degrande, ... A. Sabbe (Eds.), Seismic risk. Liege, Belgium: ULg.

Demonceau, J.-F., Jaspart, J.-P., Klinkhammer, R., Weynand, K., Labory, F., & Cajot, L.-G. (2008). Recent developments on composite connections: behaviour of joints subjected to sagging bending moments and presentation of a free design dedicated software. In EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures (pp. 447-452). Bruxelles, Belgium: ECCS European Convention for Constructional Steelwork.

Demonceau, J.-F., Luu, N. N. H., & Jaspart, J.-P. (2008). Development of membranar effects in frame beams: experimental and analytical investigations. In EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures (pp. 1743-1748). Bruxelles, Belgium: ECCS European Convention for Constructional Steelwork.

Luu, N. N. H., Demonceau, J.-F., & Jaspart, J.-P. (2008). Global structural behaviour of a building frame further to its partial destruction by column loss. In R. Ofner, D. Beg, J. Fink, R. Greiner, ... H. Unterweger, EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures (pp. 1749-1754). Burxelles, Belgium: ECCS European Convention for Constructional Steelwork.

Ly, D. P. L., Demonceau, J.-F., & Jaspart, J.-P. (2008). New simplified analytical method for the prediction of global stability of composite sway frames. In EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures (pp. 387-392). Bruxelles, Belgium: ECCS European Convention for Constructional Steelwork.

Jaspart, J.-P., & Demonceau, J.-F. (2008). Composite joints in robust building frames. In Proceeding of the composite consruction in steel and concrete conference.

Demonceau, J.-F., & Jaspart, J.-P. (2008). Robustness of structures - behaviour of composite joints. In Sixth International Workshop on Connections in Steel Structures (pp. 467-477).

Jaspart, J.-P., Demonceau, J.-F., & Luu, N. N. H. (2008). Numerical, analytical and experimental investigations on the response of steel and composite buildings further the loss of a column. In Proceedings of the Colloquium on structural design of constructions subjected to exceptional or accidental actions (pp. 69-89).

Jaspart, J.-P., & Demonceau, J.-F. (2007). Contribution to the derivation of robustness requirements for steel and composite structures. In Proceedings of Advances in steel structures Conference (pp. 911-916).

Demonceau, J.-F., & Jaspart, J.-P. (2007). Experimental investigations on the behaviour of a composite frame after the loss of a column. In R. G. Beale, Proceeding of the 6th International Conference on Steel and Aluminium Structures (pp. 923-930). abingdon, United Kingdom: Nuffield Press.

Kuhlmann, U., Rölle, L., Jaspart, J.-P., & Demonceau, J.-F. (2007). Robustness - Robust structures by joint ductility. In F. Wald, F. Mazzolani, M. Byfield, D. Dubina, ... M. Faber, Urban Habitat Constructions under Catastrophic Events (pp. 330-335).

Demonceau, J.-F., Luu, N. N. H., & Jaspart, J.-P. (2006). Recent investigations on the behaviour of buildings after the loss of a column. In D. Dubina & V. Ungureanu, Steel: a new and traditional material for building (pp. 480-490). Taylor & Francis.

Demonceau, J.-F., Luu, H., & Jaspart, J.-P. (2005). Intégrité structurale sous actions exceptionnelles. In Actes du Colloque International: L'acier dans la construction 2ème édition (pp. 195-206).

Maquoi, R., Jaspart, J.-P., & Demonceau, J.-F. (2004). Contribution to the design of sway composite frames. In R. Leon & J. Lange, Composite Construction in Steel and Concrete V (pp. 653-663). The American Society of Civil Engineers.

Demonceau, J.-F., & Jaspart, J.-P. (2004). Experimental and analytical investigations on single-sided composite joint configuration. In J. Walraven, J. Blaauwendraad, T. Scarpas, ... B. Snijder, 5th International PhD Symposium in Civil Engineering (pp. 341-349). Balkema.

Demonceau, J.-F., & Jaspart, J.-P. (2004). Numerical and analytical investigations on composite sway frames. In Modern Building Materials, Structures and Techniques (pp. 384-392).

Oral communications or posters

Saufnay, L., Jaspart, J.-P., & Demonceau, J.-F. (02 October 2022). Sustainability Assessment of High Strength Steel Elements. Paper presented at Le Giornate Italiane Della Costruzione in Acciaio (The Italian Steel Days), Francavilla Al Mare (CH), Italy.

Mpemba Nkole Kabongo, A., Jaspart, J.-P., & Demonceau, J.-F. (15 September 2022). présentation de l'article "Technical study of Kongo-Central colonial steel houses belonging to the DRC patrimony" au colloque international SDSS 2022. Paper presented at The International Colloquium on Stability and Ductility of Steel Structures (SDSS 2022), Aveiro, Portugal.

Mpemba Nkole Kabongo, A., Demonceau, J.-F., & Jaspart, J.-P. (07 October 2021). Etude technique et proposition de solutions de réparation des maisons métalliques du Kongo-Central en vue de leur reconversion et de leur patrimonialisation. Poster session presented at Journée UEE 2021, Liège, Belgium.

Mpemba Nkole Kabongo, A., Demonceau, J.-F., & Jaspart, J.-P. (15 December 2020). Etude technique des maisons métalliques faisant partie du patrimoine du Kongo - Central. Poster session presented at Fourth edition young researchers overseas day, Liège, Belgium.

Demonceau, J.-F. (04 April 2019). Assemblages pré-qualifiés en acier - outils à votre disposition. Paper presented at Dimensionnement parasismique des structures de bâtiment en acier, Liège, Belgium.

Demonceau, J.-F. (27 March 2019). Pre-normative design recommendations for seismically qualified steel joints. Paper presented at Standardised steel connections for seismic resistant steel structrues, London, United Kingdom.

Demonceau, J.-F. (11 June 2018). Design of beam-to-column connections according to EC3: classification and component method. Paper presented at Freedam workshop, Salerno, Italy.

Demonceau, J.-F. (21 June 2016). Design criteria and experimental performance - Extended end-plate. Paper presented at Final workshop - European Pre-Qualified Steel Joints, Naples, Italy.

Demonceau, J.-F. (16 June 2015). Robustimpact project - System design. Paper presented at Robust Impact Design of Steel and Composite Buildings, Stuttgart, Germany.

Demonceau, J.-F. (16 June 2015). Concept of robustness. Paper presented at Robust Impact Design of Steel and Composite Buildings, Stuttgart, Germany.

Demonceau, J.-F. (13 May 2014). Comportement des structures de bâtiment soumises à des évènements exceptionnels. Paper presented at Journée de rencontre DG01 - Universités, Namur, Belgium.

Tondini, N., Van Long, H., Demonceau, J.-F., & Franssen, J.-M. (30 September 2013). FIRE TESTING OF HIGH-STRENGTH STEEL CIRCULAR COLUMNS. Paper presented at XXIV Giornate Italiane della Costruzione in Acciaio, Torino, Italy.

Demonceau, J.-F., Hoang, V. L., & Jaspart, J.-P. (13 June 2013). Robustness aspects - During the assembling and the final stage. Paper presented at Frameup project workshop, Stockholm, Sweden.

Demonceau, J.-F. (26 October 2012). Robustesse des structures. Paper presented at Journée SCIA - Conférence sur le calcul des structures, Gembloux, Belgium.

Demonceau, J.-F. (18 November 2010). Robustness of structures. Paper presented at Journée acier 2010, Louvain-la-Neuve, Belgium.

Books

As author or co-author

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Erdbebenbemessung von Stahlkonstruktionen mit beschädigungsfreien Anschlüssen. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). ПРОЕКТИРАНЕ ЗА СЕИЗМИЧНИ ВЪЗДЕЙСТВИЯ НА СТОМАНЕНИ КОНСТРУКЦИИ С ВЪЗЛИ БЕЗ ОСТАТЪЧНИ ПОВРЕДИ. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Αντισεισμικός σχεδιασμός χαλύβδινων κατασκευών με συνδέσεις FREEDAM. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). POTRESNOODPORNO PROJEKTIRANJE JEKLENIH KONSTRUKCIJ S SIPANJEM V SPOJIH BREZ POŠKODB. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Hasar Yalıtımlı Birleşimlere Sahip Çelik Yapıların Sismik Tasarımı. (313). eccs.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Dimensionamiento Sísmico de Estructuras Metálicas con Uniones Libres de Daño. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Conception Sismique de Structures en Acier avec des Assemblages sans Dommages. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Seismisch Ontwerp van Staalconstructies met FREE from DAMage verbindingen. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Dimensionamento Sísmico de Estruturas Metálicas com Ligações Livres de Dano FREEDAM. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Montuori, R., Nastri, E., Latour, M., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, F. S., Jaspart, J.-P., & Demonceau, J.-F. (2022). Proiectarea seismică a structurilor metalice cu îmbinări rezistente la avarii FREEDAM. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, V., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Progettazione sismica di strutture in acciaio con collegamenti FREE from DAMage. ECCS - European Convention for Constructional Steelwork.

Piluzo, V., Rizzano, G., Latour, M., Montuori, R., Nastri, E., Francavilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Seismic design of steel structures with FREE from DAMage steel connections. Bruxelles, Unknown/unspecified: ECCS - European Convention for Constructional Steelwork.

Vincenzo, P., Rizzano, G., Latour, M., Francavbilla, A. B., Di Benedetto, S., Landolfo, R., D'Aniello, M., Simoes da Silva, L., Santiago, A., Santos, A. F., Jaspart, J.-P., & Demonceau, J.-F. (2022). Návrh ocelových konstrukcí se styčníky FREE from DAMage. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simoes da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). Design recommendations against progressive collapse in steel and steel-concrete buildings. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiaga, A., Santos, A. F., Simoes da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). RECOMENDACIONES DE PROYECTO FRENTE AL COLAPSO PROGRESIVO EN EDIFICIOS DE ACERO Y DE ACERO-HORMIGÓN. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santo, A. F., Simoes da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). ZALECENIA PROJEKTOWE ZAPOBIEGAJĄCE WYSTĄPIENIU KATASTROFY POSTĘPUJĄCEJ BUDYNKÓW STALOWYCH I STALOWO-BETONOWYCH. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., Weynand, K., ... Anwaar, O. (2021). RECOMENDAÇÕES PARA DIMENSIONAMENTO CONTRA O COLAPSO PROGRESSIVO EM ESTRUTURAS METÁLICAS E MISTAS AÇO-BETÃO. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simoes Da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). RECOMMANDATIONS POUR LA CONCEPTION DE BÂTIMENTS MÉTALLIQUES ET MIXTES VIS-À-VIS DE LA RUINE PROGRESSIVE. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simoes Da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). RECOMANDĂRI DE PROIECTARE PENTRU REDUCEREA RISCULUI DE COLAPS PROGRESIV LA STRUCTURI ÎN CADRE DIN OȚEL ȘI COMPUSE OȚEL-BETON. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simoes da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). RACCOMANDAZIONI DI PROGETTO NEI CONFRONTI DEL COLLASSO PROGRESSIVO DI STRUTTURE DI ACCIAIO E ACCIAIO-CALCESTRUZZO. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simoes Da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). KONSTRUKČNÍ DOPORUČENÍ K ZAMEZENÍ PROSTOROVÉHO ZŘÍCENÍ OCELOVÝCH A OCELOBETONOVÝCH KONSTRUKCÍ. ECCS - European Convention for Constructional Steelwork.

Demonceau, J.-F., Golea, T., Jaspart, J.-P., Elghazouli, A., Khalil, Z., Santiago, A., Santos, A. F., Simos Da Silva, L., Kuhlmann, U., Skarmoutsos, G., Baldassino, N., Zandonini, R., Bernardi, M., Zordan, M., Dinu, F., Marginean, I., Jakab, D., Dubina, D., Wertz, F., ... Anwaar, O. (2021). KONZEPTE ZUR VERMEIDUNG EINES PROGRESSIVEN KOLLAPSES IN STAHL- UND VERBUNDKONSTRUKTIONEN BEI AUßERGEWÖHNLICHEN EINWIRKUNGEN. ECCS - European Convention for Constructional Steelwork.

Piluso, V., Rizzano, G., Montuori, R., Latour, M., Francavilla, A. B., Nastri, Ferrante Cavallaro, G., Di Benedetto, S., Simoes da Silva, L., Santiago, A., Castellano, M. G., Di Fusco, D., Jaspart, J.-P., Demonceau, J.-F., D'Antimo, M., Landolfo, R., D'Aniello, M., Zimbru, M., Silva, J. M., & Guerra, I. (2019). Free from damage steel connections. Publication office of the European Union.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartagli, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). Broșurăinformativăpentru patrunoduri metalice precalificate seismic. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Volume with information borchures for 4 seimsically qualified joints. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Volume informativo sui nodi pre-qualifcati per le applicazioni sismiche. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Informatiebrochure voor 4 gekwalificeerde aardbevingsbestendige staalverbindingen. (ECCS). ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Descritptif de 4 types d'assemblages préqualifiés pour la construction parasismique. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Bleeck, L., & Bigelow, H. (2018). EQUALJOINTS PLUS - Sammelband mit informationsbroschüren für 4 seismisch qualifizierte anschlüsse. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Jimenez, A., Real, E., & Mirambell, E. (2018). EQUALJOINTS PLUS - Volumen con boletines de informacion para 4 uniones calificadas para sismo. (ECCS). ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Kurikova, M., Kozich, M., & Wald, F. (2018). Předem kvalifikované styčníkypro ocelové konstrukce vystavené zemětřesení Návrh. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Kurikova, M., Kozich, M., & Wald, F. (2018). Předem kvalifikované styčníky pro ocelové konstrukce vystavené zemětřesení Podklady. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Moze, P., Piculin, S., & Zupan, N. (2018). Brošura z informacijamiza 4 potresno kvalificirane spoje. ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Oliveira, S., Pedrosa, B., Rebelo, C., & da Silva, L. S. (2018). EQUALJOINTS PLUS - Brochuras informativas relativas a 4 ligaçoes pré-qualificadas para zonas sismicas. (ECCS). ECCS.

Landolfo, R., D'Aniello, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Vayas, I., Thanopoulos, P., Bezas, M.-Z., Chatzidaki, A., Tsarpalis, P., Tsarpalis, D., & Vlachakis, K. (2018). Τόμος με ενημερωτικά φυλλάδια για τέσσερις σεισμικά πιστοποιημένους μεταλλικούς κόμβους. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Constanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Volume with pre-normative design recommendations for seismically qualified steel joints. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). Том с предварителни нормативни изисквания за проектиране на сеизмично квалифицирани стоманени възли. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Informatiebrochure met prenormatieve ontwerpaanbevelingen voor op aardbevingen gekwalificeerde staalverbindingen. (ECCS). ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS - Documento pre-normativo e linee guida per il progetto sismico dei nodi trave-colonna prequalificati. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., Bompa, D., Bleeck, L., & Bigelow, H. (2018). EQUALJOINTS PLUS - Semmelband mit pränormativen bemessungsempfehlungen für seismisch qualifizierte stahlanschlüsse. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., Bompa, D., Moze, P., Piculin, S., & Zupan, N. (2018). Priporočila za projektiranje potresno kvalificiranih spojev. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., Bompa, D., Oliveira, S., Pedrosa, B., Rebelo, C., & da Silva, L. S. (2018). EQUALJOINTS PLUS - Recomendaçoes de calculo pré-normativas relativas a juntas metalicas pré-qualificadas para zonas sismicas. (ECCS). ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jaka, D., Dubina, D., Elghazouli, A., Bompa, D., Vayas, I., Thanopoulos, P., Bezas, M.-Z., Chatzidaki, A., Tsarpalis, P., Tsarpalis, D., & Vlachakis, K. (2018). Τόμος με προ-κανονιστικές συστάσεις σχεδιασμού για σεισμικά πιστοποιημένους μεταλλικούς κόμβους. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). Recomandări de proiectare pre-normative pentru nodurimetalice precalificateseismic. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, D. (2018). EQUALJOINTS PLUS Recommandations pré-normatives pour le calcul parasismique d'assemblages pré-qualifiés en construction métallique. ECCS.

Landolfo, R., D'Aniello, M., Tartaglia, R., Costanzo, S., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., Bompa, D., Arrayago, I., & Mirambell, E. (2018). EQUALJOINTS PLUS - Volumen con recomendaciones prenormativas de diseno para uniones de acero calificadas para simso. (ECCS). ECCS.

Landolfo, R., D'Anillo, M., Costanzo, S., Tartaglia, R., Demonceau, J.-F., Jaspart, J.-P., Stratan, A., Jakab, D., Dubina, D., Elghazouli, A., & Bompa, B. (2018). Том с информационни брошури за 4 типа сеизмично квалифицирани възли. ECCS.

Kuhlmann, U., Hoffman, N., Jaspart, J.-P., Demonceau, J.-F., Zandonini, R., Baldassino, N., Hoffmeister, B., Colomer, C., Korndorfer, J., Hanus, F., Charlier, M., Hjiaj, M., & Guezouli, S. (2017). Robust impact design of stel and composite building structures. European Commission.

D'Aniello, M., Costanzo, S., Tartaglia, R., Stratan, A., Dubina, D., Vulcu, C., Maris, C., Zub, C., Da Silva, L., Rebelo, C., Augusto, H., Shahbazian, A., Gentili, F., Jaspart, J.-P., Demonceau, J.-F., Van Hoang, L., Elghazouli, A., Tsitos, A., Vassart, O., ... Landolfo, R. (2016). European pre-qualified steel joints. European Commission.

Dubina, D., Vulcu, C., Stratan, A., Ciutina, A., Grecea, D., Loan, A., Tremeea, A., Braconi, A., Fulop, L., Jaspart, J.-P., Demonceau, J.-F., Hoang, V. L., Comeliau, L., Kuhlmann, U., Kleiner, A., Rasche, C., Landolfo, R., D'aniello, M., Portioli, F., ... Ferrini, M. (2015). High strength steel in seismic resistant building frames (HSS-SERF). Bruxelles, Belgium: Commission Européenne. doi:10.2777/725123

Vassart, O., Martin, P.-O., Elguezabal, P., Siebers, R., den Hollander, J., Talvik, I., Cascini, L., Netusil, M., Gervasio, H., Kvedaras, A. K., Garcia, P., Astedt, B., Jarmai, K., Ungreanu, V., Founti, M., Huet, V., Moze, P., Demonceau, J.-F., & Piasecki, M. (2014). Large valorisation on sustainability of steel structures. European Commission.

Veljkovic, M., Andrade, P., Heistermann, T., Jaspart, J.-P., Demonceau, J.-F., Van Long, H., Carrasco, C., Castano, M., Lopez Vega, A., da Silva, L., Rebelo, C., Vicente, G., Lundholm, N., Lundholm, A., Lundholm, J., Pak, D., Pyschny, D., Arseniev, M., Remde, C., & Herion. (2014). Optimization of frames for effective assembling. European Commission.

Aleksievska, J. H., Aleksovska, M., Altay Askar, G., Aras, F., Arion, C., Atmaca, S., Attari, N. E., Beg, D., Birouk, A., Bouzid, F., Bozer, A., Iben Brahim, A., Cherraj, M., Chemrouk, M., Colanzi, F., Calado, L., Cohen, O., Cretu, D., D'Aniello, M., ... Zelkha, M. (2012). FP6 PROHITECH project: Volume 6: Seismic protection of historical buildings: application and design. Polimetrica.

Aleksievska, J. H., Altay Askar, G., Arion, C., Attari, N. E., Beg, D., Birouk, A., Bouzid, F., Bozer, A., Bozinovski, Z., Calado, L., Chemrouk, M., Cioboiu, F., Della Corte, G., De Matteis, G., Demonceau, J.-F., Denkovska, L., Derradj, Z., Dumova-Jovanoska, E., El Hammoumi, A., ... Viskovic, A. (2012). FP6 PROHITECH project: Volume 1: Intervention strategies for the seismic protection of historical building heritage in the Mediterranean basin. Polimetrica.

Aleksovska, M., Altay Askar, G., Aras, F., Beg, D., Birouk, A., Bozer, A., Brando, G., Calado, L., Campitiello, F., Churilov, S., Colanzi, F., D'Aniello, M., Dasiou, M.-E., Della Corte, G., De Matteis, G., Demonceau, J.-F., Dogariu, A., Dubina, D., Dumova-Jovanoska, E., ... Vayas, I. (2012). FP6 PROHITECH project: Volume 4: Seismic Protection of historical buildings: numerical analysis. Polimetrica.

Altay Askar, G., Arion, C., Barrecchia, E., Beg, D., Bordea, S., Bozer, A., Brando, G., Calado, L., Daescu, C., Dan, D., D'Aniello, M., Della Corte, G., De Matteis, G., Demonceau, J.-F., Dogaru, A., Dubina, D., Fiorino, L., Florut, C., Formisano, A., ... Vayas, I. (2012). FP6 PROHITECH project: Volume 5: Seismic protection of historical buildings: calculation models. Polimetrica.

Arangelovski, T., Altay Askar, G., Aras, F., Arion, C., Beg, D., Birouk, A., Bozer, A., Brando, G., Calado, L., Cherraj, M., Chesca, B., Colanzi, F., Cotofana, D., Daescu, C., Dan, D., Dasiou, M. E., D'Aniello, M., Della Corte, G., De Matteis, G., ... Vayas, I. (2012). FP6 PROHITECH project: Volume 3: Seismic Protection of historical buildings: experimental activity. Polimetrica.

Bursi, O., Kumar, A., Demofonti, G., Zilli, G., Tamponi, G. M., Ferino, J., Guvaia, H., Maia, C., Rivera, S., Alvarez, R., Lezcano, R., Johansson, E., Fuertes, N., Jaspart, J.-P., Demonceau, J.-F., Hoang, V. L., Ly, D. P. L., Karamanos, S., Perdikaris, P., ... Sommariva, M. (2012). Design and integrity assessment of high strength tubular structures for extreme loading conditions. Bruxelles, Belgium: European Commission.

Demonceau, J.-F., Hoang, V. L., Jaspart, J.-P., Sommariva, M., Maio, D., Zilli, G., Demofonti, G., Ferino, J., Pournara, A.-E., Varelis, G. E., Papatheocharis, C., Perdikaris, P., Pappa, P., Karamanos, S. A., Ferrario, F., Bursi, O. S., & Zanon, G. (2012). PERFORMANCE-BASED APPROACHES FOR HIGH STRENGTH TUBULAR COLUMNS AND CONNECTIONS UNDER EARTHQUAKE AND FIRE LOADINGS. Bruxelles, Belgium: Communauté Européenne.

Demonceau, J.-F., Huvelle, C., Coméliau, L., Hoang, V. L., Jaspart, J.-P., Fang, C., Izzuddin, B., Elghazouli, A. Y., Nethercot, D. A., Zhao, B., Taillefer, N., Dhima, D., Gens, F., Haremza, C., Santiago, A., Da Silva, L., & Obiala, R. (2012). Robustness of car parks against localised fire. Bruxelles, Belgium: Communauté Européene.

Maquoi, R., Debruyckere, R., Demonceau, J.-F., & Pyl, L. (2011). Staal-Beton. Infosteel.

Maquoi, R., Debruyckere, R., Demonceau, J.-F., & Pyl, L. (2011). Constructions mixtes. (Infosteel). Bruxelles, Belgium: Infosteel.

Jaspart, J.-P., Demonceau, J.-F., Renkin, S., & Guillaume, M. L. (2009). European design recommendations for simple joints in steel structures. Bruxelles, Belgium: ECCS (European Convention for Constructional Steelwork).

Bursi, O., Ferrario, F., Haller, M., Lennon, T., Bianco, L., Mallardo, R., Demonceau, J.-F., Franssen, J.-M., Jaspart, J.-P., Hanus, F., Bayo, E., Garcia, J., Alderighi, E., Braconi, A., & Salvatore, W. (2008). Prefabricated composite beam-to-concrete filled tube or partially reinforced-concrete-encased column connections for severe seismic and fire loadings. Bruxelle, Belgium: European Commission.

Kuhlmann, U., Rolle, L., Jaspart, J.-P., Demonceau, J.-F., Vassart, O., Weynand, K., Ziller, C., Busse, E., Lendering, M., Zandonini, R., & Baldassino, N. (2008). Robust structures by joint ductility. Bruxelle, Belgium: European Commission.

Bitar, D., Caramelli, S., Salvatore, W., Taucer, F., Jaspart, J.-P., Demonceau, J.-F., Haller, M., Grijalvo, J., Heise, F. J., Kindmann, R., Kraus, M., Hoffmeister, B., Oppe, M., & Stangenberg, H. (2006). Applicability of composite structures to sway frames. Luxembourg, Luxembourg: Office for Official Publications of the European Communities.

As editor or director

Courard, L., Dehousse, N., Demonceau, J.-F., Franssen, J.-M., & Maquoi, R. (Eds.). (2011). 300e conférence du C.E.R.E.S. Liège, Belgium: Centre d'Etudes, de Recherches et d'Essais Scientifiques du Génie Civil.

Book chapters and contributions to collective works

Demonceau, J.-F. (2018). Preface. In L. Costa Neves, P. Vellasco, ... I. Valente, Shear connectors that use concrete dowels. ECCS.

Demonceau, J.-F., & Jaspart, J.-P. (2017). Joints in building structures subjected to exceptional events. In Stahlbau, holzbau und Verbundbau - Festschrift zum 60. Geburtstag von Uni.-Prof. Dr.-Ing. Ulrike Kuhlmann (pp. 291-296). Ernst & Sohn.

Hoang, V. L., Demonceau, J.-F., & Jaspart, J.-P. (2013). INNOVATIVE BOLTED BEAM-TO-COLUMN JOINTS IN MOMENT RESISTANT BUILDING FRAME: FROM EXPERIMENTAL TESTS TO DESIGN GUIDELINES. In D. Dubina, R. Landolfo, A. Stratan, ... C. Vulcu (Eds.), Application of High Strength Steels in Seismic Resistant Structures. Timisaora, Romania: Orizonturi Universitare.

Jaspart, J.-P., Maquoi, R., Demonceau, J.-F., Franssen, J.-M., Cajot, L.-G., & Debruyckere, R. (2007). Eurocode 4 EN 1994: Exemples d'application au calcul des structures mixtes acier - béton. In J.-P. Jaspart, R. Maquoi, J.-F. Demonceau, J.-M. Franssen, L.-G. Cajot, ... R. Debruyckere, Eurocode 4 EN 1994: Exemples d'application au calcul des structures mixtes acier - béton (pp. 8-74). Bruxelles, Belgium: Centre Information Acier.

Theses and dissertations

Doctoral thesis

Demonceau, J.-F. (2008). Steel and composite building frames: sway response under conventional loading and developmet of membrane effects in beams further to an exceptional action. Unpublished doctoral thesis, ULiège - Université de Liège.
Jury: Jaspart, J.-P. (Promotor), Plumier, A., Maquoi, R., Bouillard, P., da Silva, L., Izzudine, B., ... Cajot, L.-G.

Master dissertations

Demonceau, J.-F. (2004). Applicability of Composite Sway Structures to Sway Frames. Unpublished DEA/DES thesis, ULiège - Université de Liège.
Jury: Jaspart, J.-P. (Promotor), Plumier, A., Maquoi, R., ... Haller, M.

Demonceau, J.-F. (2001). Etude des sollicitations sismiques dans une construction non ingéniérée en zone de séismicité faible à moyenne. Unpublished master thesis, ULiège - Université de Liège.
Jury: Plumier, A. (Promotor), Dotreppe, J.-C. (Promotor), ... Fonder, G.

Expert reports

Jaspart, J.-P., Huvelle, C., & Demonceau, J.-F. (2012). Gap analysis on robustness of tubular structures. CIDECT.

Demonceau, J.-F., Hjiaj, M., Aribert, J.-M., Ranzi, G., Beguin, P., Ciutina, A., Neves, L., Kuhlmann, U., & Roelle, L. (2012). “State-of-problem report prepared for the TC11 meeting held in Valencia on October 2012”.

Learning materials

Course notes

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2011). Robustness of steel structures - Homework: Application of different robustness approaches to a frame building structure.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2011). Robustness of steel structures - Exercise SOLUTION: Application of different robustness approaches to a frame building structure.

Coméliau, L., Demonceau, J.-F., & Jaspart, J.-P. (2011). Robustness of steel structures - Exercise: Application of different robustness approaches to a frame building structure.

Jaspart, J.-P., Maquoi, R., & Demonceau, J.-F. (2006). Elements de construction mixte.

Others

Cescotto, S., & Demonceau, J.-F. (2009). Faites le pont... Cahier pédagogique. (ULiège - Université de Liège).

Other publications and communications

Articles in scientific journals without peer reviewing

Mpemba Nkole Kabongo, A., Jaspart, J.-P., & Demonceau, J.-F. (14 September 2022). Technical Study of Kongo‐Central Colonial Steel Houses Belonging to the DRC Patrimony. ce/papers, 5 (4), 1067-1074. doi:10.1002/cepa.1852

Golea, T., Santos, A. F., Jaspart, J.-P., Latour, M., Santiago, A., & Demonceau, J.-F. (2022). Design for robustness of steel structures with dissipative FREEDAM joints. Ingegneria Sismica, (2).

Bezas, M.-Z., Demonceau, J.-F., Vayas, I., & Jaspart, J.-P. (2022). Compression tests on large angle columns in high‑strength steel. Steel Construction, (15). doi:10.1002/stco.202100051

Speeches and writings for a general audience

Conferences given outside the academic context

Demonceau, J.-F. (2022). RFCS Summit 2022 - FAILNOMORE. Paper presented at RFCS Summit 2022, Bruxelles, Belgium.

Demonceau, J.-F. (2015). Avantages, principes et règles d'application pour le calcul des poutres, dalles et colonnes mixtes de bâtiment. Paper presented at Conférence SCIA pour ingénieur structure, Gembloux, Belgium.

Franssen, J.-M., Dumont, F., Wellens, E., Tondini, N., Hoang, V. L., & Demonceau, J.-F. (2011). Fire tests made for the ATTEL RFCS research project. Paper presented at ECCS TC3 Annual meeting, Paris, France.

Demonceau, J.-F. (2010). Robustesse des structures. Paper presented at Journée Construction Acier 2010, Louvain-la-Neuve, Belgium.