Publications and communications of Ludovic Noels

Articles in scientific journals with peer reviewing

Rothkegel Ide, J. I., Renson, B., Bruyneel, M., & Noels, L. (15 November 2024). Development of a geometric modeling strategy for the generation of representative unit cells in 2D braids. Composite Structures, 348, 118503. doi:10.1016/j.compstruct.2024.118503

Nguyen, V. D., Wu, L., Remacle, F., & Noels, L. (01 May 2024). A quantum annealing-sequential quadratic programming assisted finite element simulation for non-linear and history-dependent mechanical problems. European Journal of Mechanics. A, Solids, 105, 105254. doi:10.1016/j.euromechsol.2024.105254

Wu, L., & Noels, L. (01 May 2024). Self-consistency Reinforced minimal Gated Recurrent Unit for surrogate modeling of history-dependent non-linear problems: Application to history-dependent homogenized response of heterogeneous materials. Computer Methods in Applied Mechanics and Engineering, 424, 116881. doi:10.1016/j.cma.2024.116881

Gülaşik, H., Houbben, M., Sànchez, C. P., Calleja Vázquez, J. M., Vanderbemden, P., Jérôme, C., & Noels, L. (2024). A thermo-mechanical, viscoelasto-plastic model for semi-crystalline polymers exhibiting one-way and two-way shape memory effects under phase change. International Journal of Solids and Structures, 112814. doi:10.1016/j.ijsolstr.2024.112814

Wu, L., Anglade, C., Cobian, L., Monclus, M., Segurado, J., Karayagiz, F., Freitas, U., & Noels, L. (23 November 2023). Bayesian inference of high-dimensional finite-strain visco-elastic-visco-plastic model parameters for additive manufactured polymers and neural network based material parameters generator. International Journal of Solids and Structures, 283, 112470. doi:10.1016/j.ijsolstr.2023.112470

Calleja Vazquez, J. M., Wu, L., Nguyen, V. D., & Noels, L. (31 August 2023). A micromechanical mean-field homogenization surrogate for the stochastic multiscale analysis of composite materials failure. International Journal for Numerical Methods in Engineering, 124 (23), 5200–5262. doi:10.1002/nme.7344

Vijayaraghavan, S., Wu, L., Noels, L., Bordas, S. P., Natarajan, S., & Beex, L. A. (07 August 2023). A data-driven reduced-order surrogate model for entire elastoplastic simulations applied to representative volume elements. Scientific Reports, 13 (1), 12781. doi:10.1038/s41598-023-38104-x

Li, M., Chaouadi, R., Noels, L., Uytdenhouwen, I., Lambrecht, M., & Pardoen, T. (01 August 2023). Effect of pre-crack non-uniformity for mini-CT geometry in ductile tearing regime. Theoretical and Applied Fracture Mechanics, 126, 103946. doi:10.1016/j.tafmec.2023.103946

Spilker, K., Nguyen, V. D., Wu, L., & Noels, L. (July 2023). Three-scale bridging for woven composites using homogenization techniques. European Journal of Mechanics. A, Solids, 100, 104974. doi:10.1016/j.euromechsol.2023.104974

Houbben, M., Sànchez, C. P., Vanderbemden, P., Noels, L., & Jérôme, C. (13 June 2023). MWCNTs filled PCL covalent adaptable networks: towards reprocessable, self-healing and fast electrically-triggered shape-memory composites. Polymer, 278, 125992. doi:10.1016/j.polymer.2023.125992

Wu, L., Mustafa, S. M., Segurado, J., & Noels, L. (15 March 2023). Second-order computational homogenisation enhanced with non-uniform body forces for non-linear cellular materials and metamaterials. Computer Methods in Applied Mechanics and Engineering, 407, 115931. doi:10.1016/j.cma.2023.115931

Hilhorst, A., Leclerc, J., Pardoen, T., Jacques, P. J., Noels, L., & Nguyen, V. D. (29 November 2022). Ductile fracture of high entropy alloys: From the design of an experimental campaign to the development of a micromechanics-based modeling framework. Engineering Fracture Mechanics, 275, 108844. doi:10.1016/j.engfracmech.2022.108844

Pereira Sanchez, C. A., Jérôme, C., Noels, L., & Vanderbemden, P. (02 November 2022). Review of Thermoresponsive Electroactive and Magnetoactive Shape Memory Polymer Nanocomposites. ACS Omega, 7 (45), 40701-40723. doi:10.1021/acsomega.2c05930

Spilker, K., Nguyen, V. D., Adam, L., Wu, L., & Noels, L. (01 September 2022). Piecewise-uniform homogenization of heterogeneous composites using a spatial decomposition based on inelastic micromechanics. Composite Structures, 295, 115836. doi:10.1016/j.compstruct.2022.115836

Khvan, T., Noels, L., Terentyev, D., Dencker, F., Stauffer, D., Hanger, U., Van Renterghem, W., Cheng, C., & Zinovev, A. (15 August 2022). High temperature nanoindentation of iron: experimental and computational study. Journal of Nuclear Materials, 567, 153815. doi:10.1016/j.jnucmat.2022.153815

Pereira Sanchez, C. A., Houbben, M., Fagnard, J.-F., Harmeling, P., Jérôme, C., Noels, L., & Vanderbemden, P. (2022). Experimental characterization of the thermo-electro-mechanical properties of a shape memory composite during electric activation. Smart Materials and Structures. doi:10.1088/1361-665x/ac8297

Rabaux, O., Riva, R., Noels, L., & Jérôme, C. (2022). Structuring Nanofibers of SMEC Sheets: A New Approach to Control Self-Folded Shape by Uniaxial Stretching. Macromolecular Materials and Engineering, 2200270. doi:10.1002/mame.202200270

Calleja Vazquez, J. M., Wu, L., Nguyen, V. D., & Noels, L. (25 May 2022). An Incremental-Secant Mean-Field Homogenization Model Enhanced With a Non-Associated Pressure-Dependent Plasticity Model. International Journal for Numerical Methods in Engineering, 123 (19), 4616-4654. doi:10.1002/nme.7048

Leblanc, C., Kilingar, N. G., Jung, A., Kamel, K. E. M., Massart, T. J., Noels, L., & Béchet, E. (09 May 2022). Analysis of an open foam generated from computerized tomography scans of physical foam samples. International Journal for Numerical Methods in Engineering, 123, 4267-4295. doi:10.1002/nme.7008

Wu, L., & Noels, L. (15 February 2022). Recurrent Neural Networks (RNNs) with dimensionality reduction and break down in computational mechanics; application to multi-scale localization step. Computer Methods in Applied Mechanics and Engineering, 390, 114476. doi:10.1016/j.cma.2021.114476

Nguyen, V. D., & Noels, L. (01 February 2022). Interaction-based material network: a general framework for (porous) microstructured materials. Computer Methods in Applied Mechanics and Engineering, 389, 114300. doi:10.1016/j.cma.2021.114300

Nguyen, V. D., & Noels, L. (January 2022). Micromechanics-based material networks revisited from the interaction viewpoint; robust and efficient implementation for multi-phase composites. European Journal of Mechanics. A, Solids, 91, 104384. doi:10.1016/j.euromechsol.2021.104384

Pereira Sanchez, C. A., Houbben, M., Fagnard, J.-F., Laurent, P., Jérôme, C., Noels, L., & Vanderbemden, P. (2022). Resistive Heating of a Shape Memory Composite: Analytical, Numerical and Experimental Study. Smart Materials and Structures, 31 (2), 025003. doi:10.1088/1361-665X/ac3ebd

Wu, L., Zhang, T., Maillard, E., Adam, L., Martiny, P., & Noels, L. (December 2021). Per-phase spatial correlated damage models of UD fibre reinforced composites using mean-field homogenisation; applications to notched laminate failure and yarn failure. Computers and Structures, 257, 106650. doi:10.1016/j.compstruc.2021.106650

Wu, L., Maillard, E., & Noels, L. (01 October 2021). Tensile failure model of carbon fibre in unidirectionally reinforced epoxy composites with mean-field homogenisation. Composite Structures, 273, 114270. doi:10.1016/j.compstruct.2021.114270

Wu, L., Adam, L., & Noels, L. (15 August 2021). Micro-mechanics and data-driven based reduced order models for multi-scale analyses of woven composites. Composite Structures, 270, 114058. doi:10.1016/j.compstruct.2021.114058

Leclerc, J., Martelleur, M., Colla, M. S., Pardoen, T., Noels, L., & Nguyen, V. D. (2021). Ductile fracture of high strength steels with morphological anisotropy. Part II: Nonlocal micromechanics-based modeling. Engineering Fracture Mechanics, (248), 107716. doi:10.1016/j.engfracmech.2021.107716

Marteleur, M., Leclerc, J., Colla, M. S., Nguyen, V. D., Noels, L., & Pardoen, T. (01 March 2021). Ductile fracture of high strength steels with morphological anisotropy. Part I: Characterization, testing, and void nucleation law. Engineering Fracture Mechanics, 244, 107569. doi:10.1016/j.engfracmech.2021.107569

Wu, L., Nguyen, V. D., Kilingar, N. G., & Noels, L. (01 September 2020). A recurrent neural network-accelerated multi-scale model for elasto-plastic heterogeneous materials subjected to random cyclic and non-proportional loading paths. Computer Methods in Applied Mechanics and Engineering, 369, 113234. doi:10.1016/j.cma.2020.113234

Leclerc, J., Nguyen, V. D., Pardoen, T., & Noels, L. (April 2020). A micromechanics-based non-local damage to crack transition framework for porous elastoplastic solids. International Journal of Plasticity, 127, 102631. doi:10.1016/j.ijplas.2019.11.010

Nguyen, V. D., Pardoen, T., & Noels, L. (April 2020). A nonlocal approach of ductile failure incorporating void growth, internal necking, and shear dominated coalescence mechanisms. Journal of the Mechanics and Physics of Solids, 137, 103891. doi:10.1016/j.jmps.2020.103891

Rappel, H., Beex, L. A. A., Hale, J. S., Noels, L., & Bordas, S. P. A. (01 April 2020). A tutorial on Bayesian inference to identify material parameters in solid mechanics. Archives of Computational Methods in Engineering, 27 (2), 361–385. doi:10.1007/s11831-018-09311-x

Wu, L., Zulueta Uriondo, K., Major, Z., Arriaga, A., & Noels, L. (01 March 2020). Bayesian inference of non-linear multiscale model parameters accelerated by a Deep Neural Network. Computer Methods in Applied Mechanics and Engineering, 360, 112693. doi:10.1016/j.cma.2019.112693

Hussein, R., Wu, L., Noels, L., & Beex, L. A. A. (December 2019). A Bayesian framework to identify random parameter fields based on the copula theorem and Gaussian fields: Application to polycrystalline materials. Journal of Applied Mechanics, 86 (12), 121009. doi:10.1115/1.4044894

Kilingar, N. G., Ehab Moustafa Kamel, K., Sonon, B., Massart, T. J., & Noels, L. (November 2019). Computational generation of open-foam representative volume elements with morphological control using distance fields. European Journal of Mechanics. A, Solids, 78, 103847. doi:10.1016/j.euromechsol.2019.103847

Mahamedou, M., Zulueta Uriondo, K., Chung, C. N., Rappel, H., Beex, L., Adam, L., Arriaga, A., Major, Z., Wu, L., & Noels, L. (15 July 2019). Bayesian Identification of Mean-Field Homogenization model parameters and uncertain matrix behavior in non-aligned short fiber composites. Composite Structures, 220, 64-80. doi:10.1016/j.compstruct.2019.03.066

Nguyen, V. D., Wu, L., & Noels, L. (June 2019). A micro-mechanical model of reinforced polymer failure with length scale effects and predictive capabilities. Validation on carbon fiber reinforced high-crosslinked RTM6 epoxy resin. Mechanics of Materials, 133, 193-213. doi:10.1016/j.mechmat.2019.02.017

Wu, L., Nguyen, V. D., Adam, L., & Noels, L. (01 May 2019). An inverse micro-mechanical analysis toward the stochastic homogenization of nonlinear random composites. Computer Methods in Applied Mechanics and Engineering, 348, 97-138. doi:10.1016/j.cma.2019.01.016

El Ghezal, M. I., Wu, L., Noels, L., & Doghri, I. (15 April 2019). A finite strain incremental-secant homogenization model for elasto-plastic composites. Computer Methods in Applied Mechanics and Engineering, 347, 754-781. doi:10.1016/j.cma.2018.12.007

Kwong, M. T., Bianchi, F., Malboubi, M., García-Grajales, J. A., Homsi, L., Thompson, M., Ye, H., Noels, L., & Jérusalem, A. (01 April 2019). 3D finite element formulation for mechanical-electrophysiological coupling in axonopathy. Computer Methods in Applied Mechanics and Engineering, 346, 1025-1050. doi:10.1016/j.cma.2018.09.006

Rappel, H., Beex, L. A. A., Noels, L., & Bordas, S. (January 2019). Identifying elastoplastic parameters with Bayes’ theorem considering output error, input error and model uncertainty. Probabilistic Engineering Mechanics, 55, 28-41. doi:10.1016/j.probengmech.2018.08.004

Wu, L., Adam, L., & Noels, L. (21 September 2018). A micro-mechanics-based inverse study for stochastic order reduction of elastic UD-fiber reinforced composites analyzes. International Journal for Numerical Methods in Engineering, 115 (12), 1430-1456. doi:10.1002/nme.5903

Hoang Truong, V., Wu, L., Golinval, J.-C., Arnst, M., & Noels, L. (April 2018). Stochastic multiscale model of MEMS stiction accounting for high order statistical moments of non-Gaussian contacting surfaces. Journal of Microelectromechanical Systems, 27 (2), 137-155. doi:10.1109/JMEMS.2018.2797133

Homsi, L., & Noels, L. (April 2018). A discontinuous Galerkin method for non-linear electro-thermo-mechanical problems; Application to shape memory composite materials. Meccanica, 53 (6), 1357-1401. doi:10.1007/s11012-017-0743-9

Wu, L., Chung, C. N., Major, Z., Adam, L., & Noels, L. (01 April 2018). From SEM images to elastic responses: a stochastic multiscale analysis of UD fiber reinforced composites. Composite Structures, 189C, 206-227. doi:10.1016/j.compstruct.2018.01.051

Leclerc, J., Wu, L., Nguyen, V. D., & Noels, L. (20 January 2018). A damage to crack transition model accounting for stress triaxiality formulated in a hybrid non-local implicit discontinuous Galerkin - cohesive band model framework. International Journal for Numerical Methods in Engineering, 113 (3), 374-410. doi:10.1002/nme.5618

Homsi, L., Geuzaine, C., & Noels, L. (01 November 2017). A coupled electro-thermal Discontinuous Galerkin method. Journal of Computational Physics, 348, 231-258. doi:10.1016/j.jcp.2017.07.028

Wu, L., Adam, L., Doghri, I., & Noels, L. (November 2017). An incremental-secant mean-field homogenization method with second statistical moments for elasto-visco-plastic composite materials. Mechanics of Materials, 114, 180-200. doi:10.1016/j.mechmat.2017.08.006

Lucas, V., Golinval, J.-C., Voicu, R., Danila, M., Gravila, R., Muller, R., Dinescu, A., Noels, L., & Wu, L. (06 July 2017). Propagation of material and surface profile uncertainties on MEMS micro-resonators using a stochastic second-order computational multi-scale approach. International Journal for Numerical Methods in Engineering, 111 (1), 26-68. doi:10.1002/nme.5452

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (June 2017). A computational stochastic multiscale methodology for MEMS structures involving adhesive contact. Tribology International, 110, 401-425. doi:10.1016/j.triboint.2016.10.007

Nguyen, V. D., Wu, L., & Noels, L. (March 2017). Unified treatment of boundary conditions and efficient algorithms for estimating tangent operators of the homogenized behavior in the computational homogenization method. Computational Mechanics, 59 (3), 483-505. doi:10.1007/s00466-016-1358-z

Nguyen, V. D., Lani, F., Pardoen, T., Morelle, X., & Noels, L. (01 October 2016). A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers. International Journal of Solids and Structures, 96, 192-216. doi:10.1016/j.ijsolstr.2016.06.008

Wu, L., Lucas, V., Nguyen, V. D., Golinval, J.-C., Paquay, S., & Noels, L. (01 October 2016). A Stochastic Multi-Scale Approach for the Modeling of Thermo-Elastic Damping in Micro-Resonators. Computer Methods in Applied Mechanics and Engineering, 310, 802-839. doi:10.1016/j.cma.2016.07.042

Hoang Truong, V., Wu, L., Paquay, S., Obreja, A. C., Voicu, R., Müller, R., Golinval, J.-C., & Noels, L. (December 2015). A probabilistic model for predicting the uncertainties of the humid stiction phenomenon on hard materials. Journal of Computational and Applied Mathematics, 289, 173 - 195. doi:10.1016/j.cam.2015.02.022

Wan, F., Tran, M. P., Leblanc, C., Béchet, E., Plougonven, E., Léonard, A., Detrembleur, C., Noels, L., Thomassin, J.-M., & Nguyen, V. D. (December 2015). Experimental and computational micro–mechanical investigations of compressive properties of polypropylene/multi–walled carbon nanotubes nanocomposite foams. Mechanics of Materials, 91 (Part 1), 95-118. doi:10.1016/j.mechmat.2015.07.004

Lucas, V., Golinval, J.-C., Paquay, S., Nguyen, V. D., Noels, L., & Wu, L. (01 September 2015). A stochastic computational multiscale approach; Application to MEMS resonators. Computer Methods in Applied Mechanics and Engineering, 294, 141–167. doi:10.1016/j.cma.2015.05.019

Wu, L., Sket, F., Molina-Aldareguia, J. M., Makradi, A., Adam, L., Doghri, I., & Noels, L. (August 2015). A study of composite laminates failure using an anisotropic gradient-enhanced damage mean-field homogenization model. Composite Structures, 126, 246-264. doi:10.1016/j.compstruct.2015.02.070

Vigueras, G., Sket, F., Samaniego, C., Wu, L., Noels, L., Tjahjanto, D., Casoni, E., Houzeaux, G., Makradi, A., Molina-Aldareguia, J. M., Vazquez, M., & Jérusalem, A. (July 2015). An XFEM/CZM implementation for massively parallel simulations of composites fracture. Composite Structures, 125, 542-557. doi:10.1016/j.compstruct.2015.01.053

Mulay, S., Becker, G., Vayrette, R., Raskin, J.-P., Pardoen, T., Galceran, M., Godet, S., & Noels, L. (January 2015). Multiscale modelling framework for the fracture of thin brittle polycrystalline films - Application to polysilicon. Computational Mechanics, 55 (1), 73-91. doi:10.1007/s00466-014-1083-4

Wu, L., Doghri, I., & Noels, L. (2015). An incremental-secant mean-field homogenisation method with second statistical moments for elasto-plastic composite materials. Philosophical Magazine, 95 (28-30), 3348-3384. doi:10.1080/14786435.2015.1087653

Wu, L., Becker, G., & Noels, L. (01 September 2014). Elastic damage to crack transition in a coupled non-local implicit discontinuous Galerkin/extrinsic cohesive law framework. Computer Methods in Applied Mechanics and Engineering, 279, 379-409. doi:10.1016/j.cma.2014.06.031

Péron-Lührs, V., Sansoz, F., Jérusalem, A., & Noels, L. (July 2014). Multiscale Computational Modeling of Deformation Mechanics andIntergranular Fracture in Nanocrystalline Copper. Computational Materials Science, 90, 253 - 264. doi:10.1016/j.commatsci.2014.03.070

Nguyen, V. D., & Noels, L. (June 2014). Computational homogenization of cellular materials. International Journal of Solids and Structures, 51 (11-12), 2183-2203. doi:10.1016/j.ijsolstr.2014.02.029

Péron-Lührs, V., Sansoz, F., & Noels, L. (February 2014). Quasicontinuum study of the shear behavior of defective tilt grain boundaries in Cu. Acta Materialia, 64, 419-428. doi:10.1016/j.actamat.2013.10.056

Wu, L., Noels, L., Adam, L., & Doghri, I. (December 2013). A combined incremental-secant mean-field homogenization scheme with per-phase residual strains for elasto-plastic composites. International Journal of Plasticity, 51, 80-102. doi:10.1016/j.ijplas.2013.06.006

Wu, L., Noels, L., Adam, L., & Doghri, I. (November 2013). An implicit-gradient-enhanced incremental-secant mean- field homogenization scheme for elasto-plastic composites with damage. International Journal of Solids and Structures, 50 (24), 3843–3860. doi:10.1016/j.ijsolstr.2013.07.022

Péron-Lührs, V., Jérusalem, A., Sansoz, F., Stainier, L., & Noels, L. (September 2013). A two-scale model predicting the mechanical behavior of nanocrystalline solids. Journal of the Mechanics and Physics of Solids, 61 (9), 1895-1914. doi:10.1016/j.jmps.2013.04.009

François-Lavet, V., Henrotte, F., Stainier, L., Noels, L., & Geuzaine, C. (July 2013). An Energy-Based Variational Model of Ferromagnetic Hysteresis for Finite Element Computations. Journal of Computational and Applied Mathematics, 246, 243–250. doi:10.1016/j.cam.2012.06.007

Nguyen, V. D., Becker, G., & Noels, L. (15 June 2013). Multiscale computational homogenization methods with a gradient enhanced scheme based on the discontinuous Galerkin formulation. Computer Methods in Applied Mechanics and Engineering, 260, 63-77. doi:10.1016/j.cma.2013.03.024

Wu, L., Tjahjanto, D., Becker, G., Makradi, A., Jérusalem, A., & Noels, L. (May 2013). A micro-meso-model of intra-laminar fracture in fiber-reinforced composites based on a Discontinuous Galerkin/Cohesive Zone Method. Engineering Fracture Mechanics, 104, 162-183. doi:10.1016/j.engfracmech.2013.03.018

Becker, G., & Noels, L. (January 2013). A full-discontinuous Galerkin formulation of non-linear Kirchhoff-Love shells: elasto-plastic finite deformations, parallel computation & fracture applications. International Journal for Numerical Methods in Engineering, 93 (1), 80-117. doi:10.1002/nme.4381

Wu, L., Golinval, J.-C., & Noels, L. (January 2013). A Micro Model for Elasto-Plastic Adhesive-Contact in Micro-Switches: Application to cyclic loading. Tribology International, 57, 137-146. doi:10.1016/j.triboint.2012.08.003

Becker, G., & Noels, L. (November 2012). Validation tests of the full-discontinuous Galerkin / extrinsic cohesive law framework of Kirchhoff-Love shells. International Journal of Fracture, 178 (1), 299-322. doi:10.1007/s10704-012-9748-5

Wu, L., Noels, L., Adam, L., & Doghri, I. (01 August 2012). A multiscale mean-field homogenization method for fiber-reinforced composites with gradient-enhanced damage models. Computer Methods in Applied Mechanics and Engineering, 233-236, 164–179. doi:10.1016/j.cma.2012.04.011

Nguyen, V. D., Béchet, E., Geuzaine, C., & Noels, L. (April 2012). Imposing periodic boundary condition on arbitrary meshes by polynomial interpolation. Computational Materials Science, 55, 390-406. doi:10.1016/j.commatsci.2011.10.017

Vigneron, L., Noels, L., Warfield, S., Verly, J., & Robe, P. (January 2012). Serial FEM/XFEM-Based Update of Preoperative Brain Images Using Intraoperative MRI. International Journal of Biomedical Imaging, 2012, 872783, 17. doi:10.1155/2012/872783

Becker, G., Geuzaine, C., & Noels, L. (October 2011). A one Field Full Discontinuous Galerkin Method for Kirchhoff-Love Shells Applied to Fracture Mechanics. Computer Methods in Applied Mechanics and Engineering, 200 (45-46), 3223-3241. doi:10.1016/j.cma.2011.07.008

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (01 August 2011). A Micro-Macroapproach to Predict Stiction due to Surface Contact in Microelectromechanical Systems. Journal of Microelectromechanical Systems, 20 (4), 976 - 990. doi:10.1109/JMEMS.2011.2153823

Becker, G., & Noels, L. (2011). A fracture framework for Euler Bernoulli beams based on a full discontinuous Galerkin formulation/extrinsic cohesive law combination. International Journal for Numerical Methods in Engineering, 85 (10), 1227–1251. doi:10.1002/nme.3008

Radovitzky, R., Seagraves, A., Tupek, M., & Noels, L. (2011). A scalable 3D fracture and fragmentation algorithm based on a hybrid, discontinuous Galerkin, Cohesive Element Method. Computer Methods in Applied Mechanics and Engineering, 200 (1-4), 326-344. doi:10.1016/j.cma.2010.08.014

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (01 December 2009). Influence of Adhesive Rough Surface Contact on Micro-Switches. Journal of Applied Physics, 106 (11), 113502. doi:10.1063/1.3260248

Moore, D., Jérusalem, A., Nyen, M., Noels, L., Jaffee, M., & Radovitzky, R. (2009). Computational biology — Modeling of primary blast effects on the central nervous system. NeuroImage, 47 (Sup. 2), 10-T20. doi:10.1016/j.neuroimage.2009.02.019

Noels, L. (2009). A discontinuous Galerkin formulation of non-linear Kirchhoff–Love shells. International Journal for Numerical Methods in Engineering, 78 (3), 296 - 323. doi:10.1002/nme.2489

Noels, L., & Radovitzky, R. (2008). An explicit discontinuous Galerkin method for non-linear solid dynamics. Formulation, parallel implementation and scalability properties. International Journal for Numerical Methods in Engineering, 74, 93-1420. doi:10.1002/nme.2213

Noels, L., & Radovitzky, R. (2008). A new discontinuous Galerkin method for Kirchhoff-Love shells. Computer Methods in Applied Mechanics and Engineering, 197, 2901-2929. doi:10.1016/j.cma.2008.01.018

Noels, L., Stainier, L., & Ponthot, J.-P. (2008). A first-order energy-dissipative momentum-conserving scheme for elasto-plasticity using the variational updates formulation. Computer Methods in Applied Mechanics and Engineering, 197 (6-8), 706–726. doi:10.1016/j.cma.2007.09.008

Nsiampa, N., Ponthot, J.-P., & Noels, L. (2008). Comparative study of numerical explicit schemes for impact problems. International Journal of Impact Engineering, 35 (12), 1688-1694. doi:10.1016/j.ijimpeng.2008.07.003

Kambouchev, N., Noels, L., & Radovitzky, R. (2007). Numerical simulation of the fluid-structure interaction between air blast waves and free-standing plates. Computers and Structures, 85 (nov-14 Sp. Iss. SI), 923–931. doi:10.1016/j.compstruc.2006.11.005

Kambouchev, N., Radovitzky, R., & Noels, L. (2007). Fluid-structure interaction effects in the dynamic response of free-standing plates to uniform shock loading. Journal of Applied Mechanics, 74, 1042-1045. doi:10.1115/1.2712230

Noels, L., & Radovitzky, R. (2007). Alternative approaches for the derivation of discontinuous Galerkin methods for nonlinear mechanics. Journal of Applied Mechanics, 74, 1031-1036. doi:10.1115/1.2712228

Deiterding, R., Radovitzky, R., Mauch, S., Noels, L., Cummings, J., & Meiron, D. (2006). A virtual test facility for the efficient simulation of solid material response under strong shock and detonation wave loading. Engineering with Computers, 22 (3-4), 325–347. doi:10.1007/s00366-006-0043-9

Kambouchev, N., Noels, L., & Radovitzky, R. (2006). Nonlinear compressibility effects in fluid-structure interaction and their implications on the air-blast loading of structures. Journal of Applied Physics, 100 (6), 063519. doi:10.1063/1.2349483

Noels, L., & Radovitzky, R. (2006). A general discontinuous Galerkin method for finite hyperelasticity. Formulation and numerical applications. International Journal for Numerical Methods in Engineering, 68 (1), 64–97. doi:10.1002/nme.1699

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Simulation of crashworthiness problems with improved contact algorithms for implicit time integration. International Journal of Impact Engineering, 32 (5), 799-825. doi:10.1016/j.ijimpeng.2005.04.010

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Energy conserving balance of explicit time steps to combine implicit and explicit algorithms in structural dynamics. Computer Methods in Applied Mechanics and Engineering, 195 (19-22), 2169–2192. doi:10.1016/j.cma.2005.03.003

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). An energy momentum conserving algorithm using the variational formulation of visco-plastic updates. International Journal for Numerical Methods in Engineering, 65 (6), 904–942. doi:10.1002/nme.1480

Noels, L., Stainier, L., & Ponthot, J.-P. (December 2005). Simulation of complex impact problems with implicit time algorithms: Application to a turbo-engine blade loss problem. International Journal of Impact Engineering, 32 (1-4), 358–386. doi:10.1016/j.ijimpeng.2005.06.003

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Simulation of complex impact problems with implicit time algorithms. Application to crashworthiness problems. Matériaux et Techniques, 15-19.

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). On the use of large time steps with an energy momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal of Solids and Structures, 41 (3-4), 663–693. doi:10.1016/j.ijsolstr.2003.09.032

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit time-integration algorithms for the numerical simulation of sheet metal forming. Journal of Computational and Applied Mathematics, 168 (1-2, Sp. Iss. SI), 331-339. doi:10.1016/j.cam.2003.12.004

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit algorithms for crashworthiness analysis. International Journal of Impact Engineering, 30 (8-9, SEP-OCT), 1161-1177. doi:10.1016/j.ijimpeng.2004.03.004

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). An energy-momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal for Numerical Methods in Engineering, 59 (1), 83-114. doi:10.1002/nme.869

Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Self-adapting time integration management in crash-worthiness and sheet metal forming computations. International Journal of Vehicle Design, 30 (1-2), 67-114. doi:10.1504/IJVD.2002.002026

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Détermination automatique de la taille du pas de temps pour les schémas implicites en dynamique non-linéaire. Mécanique and Industries, 3 (1), 63-77. doi:10.1016/S1296-2139(01)01134-4

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Combined implicit-explicit algorithms for non-linear structural dynamics. Revue Européenne des Éléments Finis, 11 (5), 565-591. doi:10.3166/reef.11.565-591

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Automatic time stepping algorithms for implicit numerical simulations of non-linear dynamics. Advances in Engineering Software, 33 (7-10, JUL-OCT), 589-603. doi:10.1016/S0965-9978(02)00073-X

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2001). Automatic time stepping algorithms for implicit numerical simulations of blade/casing interactions. International Journal of Crashworthiness, 6 (3), 351-362. doi:10.1533/cras.2001.0183

Scientific conferences in universities or research centers

Nguyen, V. D., Wu, L., & Noels, L. (31 July 2024). Resolution of elasto-plastic finite-elements problems by quantum annealing [Paper presentation]. School of Mechanical Engineering.

Noels, L., Calleja, J. M., Wu, L., & Nguyen, V. D. (10 July 2023). Data-driven-based History-Dependent Surrogate Models in the context of stochastic multi-scale simulations for elasto-plastic composites [Paper presentation]. School of mechanical engineering, Xi'an, China.

Wu, L., & Noels, L. (08 December 2021). A Recurrent Neural Network-based Surrogate Model for History-Dependent Multi-scale Simulations of Composite Materials [Paper presentation]. BRAIA Lecture Series on Technology Frontier, Northwestern Polytechnical University, China.

Wu, L., & Noels, L. (04 November 2021). A Recurrent Neural Network-based Surrogate Model for History-Dependent Multi-scale Simulations [Paper presentation]. SimTech Seminar on Model Reduction and Data Techniques for Surrogate Modelling, Stuttgart, Germany.

Noels, L., & Wu, L. (05 July 2021). A recurrent neural network-accelerated multi-scale model for elasto-plastic heterogeneous materials subjected to random cyclic and non-proportional loading paths [Paper presentation]. Materials for Medical Engineering, Internationale Akademie Traunkirchen, Austria.

Noels, L., & Wu, L. (08 February 2021). Neural network-based surrogate model for multi-scale analyses [Paper presentation]. Materials for Medical Engineering, Linz, Austria.

Vijayaraghavan, S., Beex, L., Noels, L., & Bordas, S. (January 2021). UNSUPERVISED LEARNING BASED MODEL ORDER REDUCTION FOR HYPERELASTOPLASTICITY [Paper presentation]. WCCM-ECCOMAS 2020.

Khvan, T., Noels, L., & Terentyev, D. (25 June 2019). Nanoindentation for sub-miniaturized testing of irradiated materials: FEM and experiments [Paper presentation]. M4F PhD and post-doc event, Madrid, Spain.

Wu, L., & Noels, L. (07 September 2018). A stochastic Mean-Field Reduced Order Model of Unidirectional Composites [Paper presentation]. Workshop on statistical approaches in mechanics, Belval, Luxembourg.

Wu, L., & Noels, L. (22 June 2018). A stochastic Mean Field Homogenization model of Unidirectional composite materials [Paper presentation]. SMMEG Seminar Series (engs solid mechanics seminars), Oxford University, United Kingdom.

Noels, L. (03 April 2018). A stochastic 3-scale method for polycrystalline materials [Paper presentation]. Mechanics and Design of Advanced Material and Structures Symposium, Xi'an, China.

Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (20 June 2016). A stochastic 3-Scale approach to study the thermomechanical damping of MEMS [Paper presentation]. Faculty of Science, Technology and Communication; Mathematics Research Unit Seminars, Luxembourg, Luxembourg.

Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (23 May 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. SMMEG Seminar Series (engs solid mechanics seminars), Oxford, United Kingdom.

Wu, L., Nguyen, V. D., Doghri, I., Adam, L., & Noels, L. (28 April 2014). Muti-scale methods with strain-softening: damage-enhanced MFH for composite materials and computational homogenization for cellular materials with micro-buckling [Paper presentation]. Solid Mechanics seminar series / Oxford, Oxford, United Kingdom.

Noels, L., Nguyen, V. D., Wu, L., Becker, G., Adam, L., & Doghri, I. (14 April 2014). Muti-scale methods with strain-softening: damage-enhanced MFH for composite materials and computational homogenization for cellular materials with micro-buckling [Paper presentation]. Seminar at the School of Aeronautics of the Northwestern Polytechnical University, Xi'an, China.

Noels, L., Wu, L., Nguyen, V. D., Doghri, I., & Adam, L. (31 January 2014). Homogenization with propagation of instabilities through the different scales [Paper presentation]. UniGR-intermatGR-Workshop on Multiscale simulations, Saarbrucken, Germany.

Noels, L., Becker, G., Mulay, S. S., Nguyen, V. D., Péron-Lührs, V., & Wu, L. (11 March 2013). Multi-scale modelling [Paper presentation]. Effective Properties of Materials: Perspectives from Mathematics and Engineering Science, Oxford, United Kingdom.

Mulay, S. S., Becker, G., Vayrette, R., Raskin, J.-P., Pardoen, T., & Noels, L. (24 November 2012). The fracture studies of polycrystalline silicon based MEMS [Paper presentation]. Nanomechanics and nanotribology for reliability design of micro- and nanosystems - international exploratory workshop, Cluj Napoca, Romania.

Wu, L., Golinval, J.-C., & Noels, L. (24 November 2012). Stiction failure in microswitches due to elasto-plastic adhesive contact and cyclic loading [Paper presentation]. Nanomechanics and nanotribology for reliability design of micro- and nanosystems - international exploratory workshop, Cluj Napoca, Romania.

Noels, L., Becker, Nguyen, V. D., Wu, L., & Balan Babu, J. (March 2012). Non-linear mechanical solvers for GMSH [Paper presentation]. UCL department semianr, Louvain la Neuve, Belgium.

Noels, L., Becker, G., Wu, L., Nguyen, V. D., & Wang, X. (September 2011). Projects in Fracture Simulations [Paper presentation]. Workshop in Damage Tolerant Design, Gosselie, Belgium.

Noels, L. (January 2010). Application of discontinuous Galerkin methods to shells and fracture of thin structures [Paper presentation]. EPFL department seminar, Lausanne, Switzerland.

Noels, L. (October 2009). Discontinuous Galerkin methods for solid mechanics: Application to fracture, shells & strain gradient elasticity [Paper presentation]. UGent department seminar, Ghent, Belgium.

Noels, L. (August 2009). Discontinuous Galerkin methods for solid mecha nics: Application to fracture, shells & strain gradient elasticity [Paper presentation]. UFSC department seminar, Florianopolis, Brazil.

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2009). Influence of Adhesive Rough Surface Contact on Micro-Switches [Paper presentation]. MUT 09, Besançon, France.

Noels, L., Stainier, L., & Ponthot, J.-P. (February 2005). Simulation of crashworthiness problems with implicit time integration methods for non-linear dynamics [Paper presentation]. Aero-Astro Department seminar, Cambridge, United States.

Scientific congresses and symposiums

Published communications

Hoang Truong, V., Paquay, S., Golinval, J.-C., Wu, L., Arnst, M., & Noels, L. (2016). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In Proceedings of the SEM XIII International Congress and Exposition on Experimental and Applied Mechanics. (SEMXIII 2016) (pp. 8).

Homsi, L., Geuzaine, C., & Noels, L. (2016). Numerical Properties of a Discontinuous Galerkin formulation for electro-thermal coupled problems. In M. Papadrakakis, V. Papadopoulos, G. Stefanou, ... V. Plevris (Eds.), Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece, 5–10 June 2016 (pp. 8). doi:10.7712/100016.1981.6991

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2016). A Study Of Dry Stiction Phenomenon In MEMS Using A Computational Stochastic Multi-scale Methodology. In EuroSimE 2016 in Montpellier (pp. 4). IEEE. doi:10.1109/EuroSimE.2016.7463333

Nguyen, V. D., Morelle, X., Lani, F., Pardoen, T., Bailly, C., & Noels, L. (2015). A viscoelastic-viscoplastic-damage constitutive model based on a large strain hyperelastic formulation for amorphous glassy polymers. In proceedings of the 20th International Conference on Composite Materials, Copenhagen, Denmark, 19-24th July 2015.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., Nguyen, V. D., & Noels, L. (2014). Prediction of macroscopic mechanical properties of a polycrystalline microbeam subjected to material uncertainties. In Á. Cunha, E. Caetano, P. Ribeiro, ... G. Muller (Eds.), Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014 (pp. 2691-2698).

Wu, L., Noels, L., & Golinval, J.-C. (2013). ON THE MODELING OF ADHESIVE CONTACT AND STICTION FAILURE IN MICRO-SWITCHES. In Ouisse (FEMTO-ST – ENSMM, France) & J. F. Deü (CNAM, FR) (Eds.), MEDYNA 2013 Proceedings (Creative Commons Attribution-NoDerivs 3.0 Generic (CC BY-ND 3.0) License, pp. 377-380).

Mulay, S. S., Becker, G., Vayrette, R., Raskin, J.-P., Pardoen, T., Galceran, M., Godet, S., & Noels, L. (2013). The fracture studies of polycrystalline silicon based MEMS. In EUROSIME 2013. doi:10.1109/EuroSimE.2013.6529898

Wu, L., Golinval, J.-C., & Noels, L. (2012). Stiction failure in microswitches due to elasto-plastic adhesive contact. In Proceedings of the XII SEM International Conference & Exposition on Experimental and Applied Mechanics (pp. 9).

Wu, L., Noels, L., Adam, L., & Doghri, I. (2012). Non-local damage-enhanced MFH for multiscale simulations of composites. In Proceedings of the XII SEM International Conference & Exposition on Experimental and Applied Mechanics (pp. 8).

Becker, G., & Noels, L. (2011). Full discontinuous Galerkin formulation of shell in large deformations with fracture mechanic applications. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, E. Béchet, C. Geuzaine, L. Noels, ... J.-F. Remacle (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 10).

François-Lavet, V., Henrotte, F., Stainier, L., Noels, L., & Geuzaine, C. (2011). Vectorial Incremental Nonconservative Consistent Hysteresis model. In M. Hogge, R. Van Keer, B. Malengier, M. Slodicka, E. Béchet, C. Geuzaine, L. Noels, J.-F. Remacle, ... E. Dick (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 10).

Nguyen, V. D., Béchet, E., Geuzaine, C., & Noels, L. (2011). Imposing periodic boundary condition on arbitrary meshes by polynomial interpolation. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, E. Béchet, C. Geuzaine, L. Noels, ... J.-F. Remacle (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 9).

Péron-Lührs, V., Jérusalem, A., Sansoz, F., Stainier, L., & Noels, L. (2011). A two-scale model predicting the mechanical sliding and opening behavior of grain boundaries in nanocrystalline solids. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, C. Geuzaine, E. Béchet, L. Noels, ... J.-F. Remacle (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 9).

Wu, L., Golinval, J.-C., & Noels, L. (2011). Influence of the elasto-plastic adhesive contact on Micro-Switches. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, C. Geuzaine, L. Noels, J.-F. Remacle, ... E. Béchet (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 8).

Wu, L., Noels, L., Adam, L., & Doghri, I. (2011). Homogenization of fibre reinforced composite with gradient enhanced damage model. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, E. Béchet, C. Geuzaine, L. Noels, ... J.-F. Remacle (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 9).

Renson, L., Deliège, G., Noels, L., & Kerschen, G. (2011). Finite Element Computation of Nonlinear Normal Modes. In Fifth International Conference on Advanced COmputational Methods in ENgineering.

Pustan, M., Rochus, V., Wu, L., Noels, L., & Golinval, J.-C. (2010). Evaluation of Tribo-Mechanical Properties of Thin Films Using Atomic Force Microscope. In First European Conference on Nanofilm ECNF2010 (pp. 7).

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2010). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In SEM 2010 Annual Conference & Exposition on Experimental and Applied Mechanics (Society for Experimental Mechanics, Inc, pp. 7).

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2010). Prediction of Stiction in Microswitch Systems. In EUROSIME 2010 (pp. 4). doi:10.1109/ESIME.2010.5464599

Nyein, M., Jérusalem, A., Radovitzky, R., Moore, D., & Noels, L. (2008). Modeling Blast-Related Brain Injury. In Proceedings of the 26th Army Science Conference, December 1–4 (2008).

Fancello, E., Vigneron, L., Noels, L., Ponthot, J.-P., Boman, R., & Stainier, L. (2007). Identificación de parámetros de viscoelasticidad finita aplicada a la simulación del comportamiento mecánico de masa encefálica. In Congreso Iberoamericano de Ingenieria Mecanica.

Noels, L., Stainier, L., & Ponthot, J.-P. (2007). Introduction of Numerical Dissipation in the Variational Updates Framework for Elasto-Plastic Constitutive Models [Paper presentation]. The 13th International Symposium on Plasticity & Its Current Applications (Plasticity07), Girwood, United States.

Noels, L., Stainier, L., & Ponthot, J.-P. (2007). An Energy-Dissipative Momentum-Conserving Time Integration Algorithm for Viscoplastic Hyperelastic Models Based on the Variational Updates Framework [Paper presentation]. Implats 2007 (Plasticity and Impact Mechanics), Bochum, Germany.

Noels, L., Stainier, L., & Ponthot, J.-P. (2007). A New Energy-Dissipative Momentum-Conserving Time Integration Scheme Using the Variational Updates Framework [Paper presentation]. ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (CompDyn 2007), Rethymno, Greece.

Mauch, S., Noels, L., Zhao, Z., & Radovitzky, R. (2006). Lagrangian simulations of penetration environments via mesh healing and adaptative optimisation [Paper presentation]. 25th Army Science Conference, Orlando, United States.

Noels, L., & Radovitzky, R. (2006). A new discontinuous Galerkin method for non-linear Mechanics [Paper presentation]. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, United States. doi:10.2514/6.2006-2122

Noels, L., Stainier, L., & Ponthot, J.-P. (2005). Simulation of Complex Crashworthiness Problems by Using a Combined Implicit/Explicit Time Integration [Paper presentation]. VIII International Conference on Computational Plasticity (Complass VIII), Barcelona, Spain.

Noels, L., Stainier, L., & Ponthot, J.-P. (2004). A Consistent Dissipative Time Integration Scheme for Structural Dynamics. Application to Rotordynamics [Paper presentation]. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, United States.

Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Advances in the time integration of Dynamical Systems. Applications to Crashworthiness problems. In Proceedings of the International Crashworthiness and Design Symposium 2003.

Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Combined implicit/explicit time integration algorithms for crashworthiness analysis and metal forming simulation. In Proceedings of IMPLAST'2003, 8th International Symposium on Plasticity and Impact Mechanics (pp. 986-993). NK. Gupta, Ed.

Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Un nouveau schéma d'intégration conservatif pour des modèles constitutifs hypoélastiques irréversibles. In M. Potier-Ferry, M. Bonnet, ... A. Bignonnet (Eds.), Actes du Sixième Colloque National en Calcul des Structures (pp. 85-92).

Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Combined Implicit/Explicit Time Integration Algorithms for the Numerical Simulation of Sheet Metal Forming. In Proceedings of ACOMEN 2002.

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Implicit-explicit time integration algorithms for the numerical simulation of blade-casing interactions. In A. M. Rajendran, B. N. Jones (Ed.), ... C. A. Brebbia (Ed.), Structures under Shock and Impact VII (pp. 179-188). WIT Press.

Noels, L., Stainier, L., & Ponthot, J.-P. (2001). Self-adapting time integration strategies for non-linear structural dynamics [Paper presentation]. Computational Mechanics-New Frontiers for New Millenium (APCOM'01), Sydney, Australia.

Noels, L., Stainier, L., & Ponthot, J.-P. (2000). Automatic time step size determination and automatic Hessian matrix actualisation selection for non-linear dynamic problems solved by implicit schemes [Paper presentation]. International Crashworthiness Conference (ICrash 2000), London, United Kingdom.

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2000). Automatic time stepping algorithms for implicit numerical simulations of non-linear dynamics. In B. H. V. Topping & C. A. Motas Soares (Eds.), FINITE ELEMENTS: TECHNIQUES AND DEVELOPMENTS (pp. 263-272). Civil Comp Press.

Oral communications or posters

Jinaga, U. K., Noels, L., & Kepa U. Zulueta. (04 June 2024). A Finite Strain Quasi-Non-Linear Thermoviscoelastic Model for Semi- Crystalline Thermoplastic Polymers subjected to Cyclic Loading [Paper presentation]. 9th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2024, Lisbon, Portugal.

Nguyen, V. D., Wu, L., Damanet, F., Remacle, F., & Noels, L. (04 June 2024). Introduction to quantum computing and non-linear finite-element (re)formulation for quantum annealing [Paper presentation]. 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024), Lisboa, Portugal.

Wu, L., Segurado, J., Mustafa, S. M., & Noels, L. (03 June 2024). Second-order homogenization with body-forces for non-linear cellular- and meta-materials [Paper presentation]. 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024), Lisboa, Portugal.

Mustafa, S. M., Wu, L., Noels, L., & Segurado Javier. (31 May 2024). Multi-scale Modelling using Recurrent Neural Network for Mesoscale Surrogation to Achieve Acceleration in Simulation of Rate-Dependent Dissipative Lattice Based and Cellular Meta-Materials [Paper presentation]. 19th European Mechanics of Materials Conference EMMC.

Wu, L., & Noels, L. (31 May 2024). A Self-consistent Reinforced minimal Gated Recurrent Unit for surrogate modelling of elasto-plastic multi-scale problems [Paper presentation]. The 19th European Mechanics of Materials Conferences (EMMC19), Madrid, Spain.

Wu, L., Segurado, J., Mustafa, S. M., & Noels, L. (29 May 2024). Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order homogenisation [Paper presentation]. The 19th European Mechanics of Materials Conferences (EMMC19), Madrid, Spain.

Wu, L., Segurado, J., Mustafa, S. M., & Noels, L. (11 October 2023). Body-force enhanced second-order computational homogenisation for non-linear cellular materials and metamaterials [Paper presentation]. ECCOMAS Thematic Conference: Computational Modelingof Complex Materials across the Scales (CMCS 2023), Eindhoven, Netherlands.

Nguyen, V. D., & Noels, L. (September 2023). Efficient surrogate models for microstructured materials based on interaction-based material networks [Paper presentation]. XVII International Conference on Computational Plasticity, COMPLAS 2023, Barcelona, Spain.

Calleja Vazquez, J. M., Nguyen, V. D., Wu, L., Mustafa, S. M., & Noels, L. (13 June 2023). Development of History-Dependent Surrogate Models in the context of stochastic multi-scale simulations for elasto-plastic composites [Paper presentation]. 5th International Conference on Uncertainty Quantification in Computational Science and Engineering (UNCECOMP2023), Athens, Greece.

Wu, L., Anglade, C., Cobian, L., Monclus, M. A., Segurado, J., Hössinger-Kalteis, A., Major, Z., Karayagiz, F., Lück; Thomas, & Noels, L. (13 June 2023). Bayesian Inference of Visco-Elastic Visco-Plastic Material Model Parameters for SLS-printed polyamide lattices [Paper presentation]. 5th International Conference on Uncertainty Quantification in Computational Science and Engineering (UNCECOMP2023), Athens, Greece.

Gholap, V., Noels, L., & Geuzaine, C. (06 June 2023). Development of a Finite Strain Weakly Coupled Electro-Magneto-Thermo-Mechanical Model for Shape Memory Polymer Composites [Paper presentation]. 10th International Conference on "Computational Methods for Coupled Problems in Science and Engineering" (COUPLED PROBLEMS 2023), Crete, Greece.

Noels, L., Wu, L., & Nguyen, V. D. (07 January 2023). Redefinition of the interactions in Deep-Material-Networks [Paper presentation]. International Conference on Plasticity, Damage, and Fracture 2023 (ICPDF 2023), Punta Cana, Dominican Republic.

Jinaga, U. K., Zulueta, K., & Noels, L. (2023). Finite-strain Thermomechanics of Viscoelastic-Viscoplastic Model for Thermoplastic Polymers [Paper presentation]. XVII International Conference on ​ Computational Plasticity, ​ COMPLAS 2023​, Barcelona, Spain.

Wu, L., & Noels, L. (2023). Dimension Reduction and Breakdown of Recurrent Neural Networks in the context of Multiscale Analyses [Paper presentation]. International Conference on Plasticity, Damage, and Fracture 2023 (ICPDF 2023), Punta Cana, Dominican Republic.

Gholap, V., Noels, L., & Geuzaine, C. (02 September 2022). Shape Memory Effects in Polymer Composites by Temperature Control Through Electromagnetic Induction Heating by Employing a Weakly Coupled Multi-Physics Multi-Timescale Model [Paper presentation]. 8th International Conference on "Advanced COmputational Methods in ENgineering", Liege, Belgium.

Calleja, J. M., Nguyen, V. D., Wu, L., & Noels, L. (31 August 2022). Pressure-dependent multiscale stochastic simulations using aMFH model constructed from full-field SVE realizations [Paper presentation]. The 8th international conference on "Advanced COmputational Methods in ENgineering" - ACOMEN 2022, Liege, Belgium.

Pereira Sanchez, C. A., Houbben, M., Fagnard, J.-F., Laurent, P., Jérôme, C., Noels, L., & Vanderbemden, P. (August 2022). Joule resistive heating of a shape memory composite : some design rules to predict the temperature in samples with rectangular cross-section (invited) [Paper presentation]. 22nd international school on condensed matter physics : State of the Art in Functional Materials & Technologies, Varna, Bulgaria.

Khvan, T., Noels, L., Terentyev Dmitry, Hangen Ude, & Chih-Cheng Chang. (05 July 2022). Crystal plasticity finite element analysis of nanoindentation process in Eurofer97 at elevated temperatures [Poster presentation]. FuseNet PhD event, Padova, Italy.

Houbben, M., Pereira Sanchez, C. A., Vanderbemden, P., Noels, L., & Jérôme, C. (13 June 2022). Comprehensive study of adding MWCNT to covalent adaptable networks of PCL towards fast and electrically triggered shape memory remoldable composites [Poster presentation]. Polymer Network Group, Rome, Italy.

Gholap, V., Noels, L., & Geuzaine, C. (08 June 2022). Weakly Coupled Electro-Magneto-Thermo-Mechanical Model for Shape Memory Polymer Composites Employing Mixed-FEM [Paper presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway.

Zhang, T., Wu, L., & Noels, L. (May 2022). Damage-enhanced order reduction models for woven composites based on data-driven multiscale mechanics [Paper presentation]. 15ème Colloque National en Calcul des Structures 16-20 Mai 2022, Presqu’île de Giens (Var), Giens, France.

Noels, L., Wu, L., & Nguyen, V. D. (05 April 2022). Elasto-plastic multi-scale simulations accelerated by a recurrent neural network-based surrogate model [Paper presentation]. 18th European Mechanics of Materials Conference (EMMC18), Oxford, United Kingdom.

Wu, L., & Noels, L. (04 April 2022). Recurrent Neural Networks (RNNs) with dimension reduction and break down in the context of high dimensional localization step in multi-scale analysis [Paper presentation]. 18th European Mechanics of Materials Conference (EMMC18), Oxford, United Kingdom.

Nguyen, V. D., & Noels, L. (April 2022). Interaction-based material networks for efficiently estimating the homogenized behavior of microstructured materials [Paper presentation]. 18th European Mechanics of Materials Conference (EMMC18), Oxford, United Kingdom.

Pereira Sanchez, C. A., Houbben, M., Fagnard, J.-F., Harmeling, P., Jérôme, C., & Noels, L. (2022). Thermo-electro-mechanical characterization of a shape memory composite during electric activation [Paper presentation]. 19th International Conference on Experimental Mechanics (ICEM-2020), Krakow, Poland.

Wu, L., & Noels, L. (13 December 2021). Bayesian inference of multiscale model parameters with artificial neural networks as surrogate [Paper presentation]. EUROMECH Colloquium 618 Uncertainty Quantification in Computational Mechanics, Esch-sur-Alzette, Luxembourg.

Nguyen, V. D., Pardoen, T., & Noels, L. (09 September 2021). A Non-Local Ductile Failure Model Accounting for Void Growth and Coalescence at Low and High Stress Triaxiality [Paper presentation]. COMPLAS 2021, Barcelona, Spain.

Wu, L., Cobian, L., Hössinger-Kalteis, A., Major, Z., Segurado, J., & Noels, L. (September 2021). A Recurrent Neural Network-based Surrogate Model for History-Dependent Multi-scale Simulations [Paper presentation]. COMPLAS 2021, Barcelona, Spain.

Spilker, K., & Noels, L. (14 June 2021). Multiscale Modeling of Composites – Piecewise-Uniform Model Order Reduction [Paper presentation]. 24th International Conference on Composite Structures (ICCS24), Porto, Portugal.

Pereira Sanchez, C. A., Houbben, M., Fagnard, J.-F., Laurent, P., Jérôme, C., & Noels, L. (2021). Analytical, numerical and experimental study of the self-heating of a shape memory composite [Paper presentation]. Smart Materials and Surfaces (SMS 2021), Milan, Italy.

Wu, L., Calleja, J. M., Nguyen, V. D., & Noels, L. (20 December 2019). A stochastic Mean-Field-Homogenization-based micro-mechanical model of unidirectional composites failure [Paper presentation]. Asian Pacific Congress on Computational Mechanics– APCOM 2019, Taipei, Taiwan.

Nguyen, V. D., Harik, P., Hilhorst, A., Jacques, P., Pardoen, T., & Noels, L. (18 December 2019). A multi-mechanism non-local porosity model for highly-ductile materials; application to high entropy alloys [Paper presentation]. Asian Pacific Congress on Computational Mechanics– APCOM 2019, Taipei, Taiwan.

Wu, L., Calleja, J. M., Nguyen, V. D., & Noels, L. (03 October 2019). An inverse Mean-Field-Homogenization-based micro-mechanical model for stochastic multiscale simulations of unidirectional composites [Paper presentation]. Computational Modelingof Complex Materials across the Scales (CMCS), Glasgow, United Kingdom.

Spilker, K., Noels, L., & Wu, L. (16 September 2019). Numerical Evaluation of Interaction Tensors in Heterogeneous Materials [Paper presentation]. 29th International Workshop on Computational Mechanics of Materials (IWCMM29), Dubrovnik, Croatia.

Leclerc, J., Nguyen, V. D., & Noels, L. (03 September 2019). A Damage to Crack Transition Framework for Ductile Failure [Paper presentation]. XV International Conference on Computational Plasticity. Fundamentals and Applications. (Complas 2019), Barcelona, Spain.

Nguyen, V. D., Pardoen, T., & Noels, L. (September 2019). A nonlocal model for ductile failure incorporating void growth and coalescence [Paper presentation]. 29th International Workshop on Computational Mechanics of Materials (IWCMM29), Dubrovnik, Croatia.

Vijayaraghavan, S., Beex, L., Noels, L., & Bordas, S. (29 July 2019). Clustering Based Model Order Reduction For Hyper Elastoplastic Material Models [Paper presentation]. US National Congress on Computational Mechanics.

Kilingar, N. G., Noels, L., Massart, T. J., Ehab Moustafa Kamel, K., Sonon, B., Leblanc, C., & Jung, A. (17 July 2019). Data driven computational analysis of open foam RVEs [Paper presentation]. Computational Methods in Multiscale, multi-uncertainity and multi-physics problems conference, Porto, Portugal.

Calleja, J. M., Wu, L., Nguyen, V. D., & Noels, L. (16 July 2019). Multiscale stochastic simulations using a MFH model constructed from full-field SVE realizations [Paper presentation]. Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems, Porto, Portugal.

Leclerc, J., Nguyen, V. D., Wu, L., & Noels, L. (13 March 2019). Damage to crack transition for ductile materials using a cohesive-band /discontinuous Galerkin framework [Paper presentation]. Colloquium 600 New challenges in finite element technology – from the perspective of mechanics and mathematics, Aachen, Germany.

Kilingar, N. G., Noels, L., Massart, T. J., Ehab Moustafa Kamel, K., & Sonon, B. (07 August 2018). Generation and Analysis of open foam RVEs with sharp edges using Distance fields and Level sets [Paper presentation]. 9th International Conference on Computational Methods, Rome, Italy.

Leclerc, J., Wu, L., Nguyen, V. D., & Noels, L. (25 July 2018). A Damage to Crack Transition Framework for Ductile Materials Accounting for Stress Triaxiality [Paper presentation]. 13th World Congress in Computational Mechanics (WCCMXIII), New York, United States.

Wu, L., Adam, L., & Noels, L. (25 July 2018). A probabilistic Mean-Field-Homogenization approach applied to study unidirectional composite structures [Paper presentation]. 13th World Congress in Computational Mechanics (WCCMXIII), New York, United States.

Nguyen, V. D., Leclerc, J., Wu, L., & Noels, L. (02 July 2018). Non-local damage to crack transition framework for ductile failure based on a cohesive band model [Paper presentation]. 10th European Solid Mechanics Conference, Bologna, Italy.

Leclerc, J., Wu, L., Nguyen, V. D., & Noels, L. (31 May 2018). An implicit non-local damage to crack transition framework for ductile materials involving a cohesive band model [Paper presentation]. Engineering Mechanics Institute Conference 2018, Boston, United States - Massachusetts.

Noels, L. (17 May 2018). Computational Fracture Mechanics [Paper presentation]. 16th Youth Symposium on Experimental Solid Mechanics (YSESM18), Traunkirchen Monastery, Austria.

Rappel, H., Beex, L., Noels, L., & Bordas, S. (27 March 2018). Bayesian inference to determine elastoplastic parameter distributions [Paper presentation]. European Mechanics of Materials Conference (EMMC16), Nantes, France.

Kilingar, N. G., Noels, L., Massart, T. J., Ehab Moustafa Kamel, K., & Sonon, B. (07 November 2017). Generation of open foam RVEs with sharp edges using Distance fields and Level sets [Paper presentation]. ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales - CMCS 2017, Paris, France.

Wu, L., Bidaine, B., Major, Z., Nghia Chung, C., & Noels, L. (07 November 2017). Generation of unidirectional composite stochastic volume elements from micro-structural statistical information [Paper presentation]. ECCOMAS Thematic Conference: Computational Modeling of Complex Materials across the Scales (CMCS 2017), Paris, France.

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 November 2017). A stochastic 3-scale method to predict the thermo-elastic behaviors of polycrystalline structures [Paper presentation]. ECCOMAS Thematic Conference: Computational Modeling of Complex Materials across the Scales (CMCS 2017), Paris, France.

Leclerc, J., Wu, L., Nguyen, V. D., & Noels, L. (14 June 2017). Cohesive Band Model: a triaxiality-dependent cohesive model inside an implicit non-local damage to crack transition framework [Paper presentation]. Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Nantes, France.

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (05 June 2017). Stochastic multiscale method applied to thermo-elasticity of polycrystalline micro-structures [Paper presentation]. 2017 Engineering Mechanics Institute Conference (EMI 2017), San Diego, United States.

Nguyen, V. D., & Noels, L. (June 2017). A multiscale computational homogenization method based on a hybrid discontinuous Galerkin formulation/ extrinsic cohesive zone model [Paper presentation]. Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Nantes, France.

Nguyen, V. D., Wu, L., Homsi, L., & Noels, L. (08 September 2016). Unified treatment of microscopic boundary conditions in computational homogenization method for multiphysics problems [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium.

Homsi, L., & Noels, L. (07 September 2016). A coupled electro-thermo-mechanical discontinuous Galerkin method applied on composite materials [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium.

Wu, L., Adam, L., Bidaine, B., & Noels, L. (07 September 2016). Simulations of composite laminates inter and intra-laminar failure using on a non-local mean-field damage-enhanced multi-scale method [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium.

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 September 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium.

Wu, L., Adam, L., Doghri, I., & Noels, L. (12 July 2016). Failure multiscale simulations of composite laminates based on a non-local mean-field damage-enhanced homogenization [Paper presentation]. 2nd International Conference on Mechanics of Composites (MechComp 2016), Porto, Portugal.

Wu, L., Lucas, V., Adam, L., & Noels, L. (12 July 2016). Mean-Field-Homogenization-based stochastic multiscale methods for composite materials [Paper presentation]. 2nd International Conference on Mechanics of Composites (MechComp 2016), Porto, Portugal.

Nguyen, V. D., Wu, L., Leclerc, J., & Noels, L. (July 2016). A multiscale computational scheme based on a hybrid discontinuous Galerkin/cohesive zone model for damage and failure of microstructured materials [Paper presentation]. WCCM – APCOM 2016 Congress, Seoul, South Korea.

Leblanc, C., Nguyen, V. D., Noels, L., & Béchet, E. (10 June 2016). Streamable Generalized Voronoi Tessellation Model for Tomographic Images [Paper presentation]. ECCOMAS Congress 2016 - European Congress on Computational Methods in Applied Sciences and Engineering, Hersonissos, Greece.

Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., Voicu, R., Baracu, A., & Noels, L. (09 June 2016). Multi-scale stochastic study of the grain orientation and roughness effects on polycrystalline thin structures [Paper presentation]. ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.

Wu, L., Sket, F., Adam, L., Doghri, I., & Noels, L. (08 June 2016). Prediction of intra- and inter-laminar failure of laminates using non-local damage-enhanced mean-field homogenization simulations [Paper presentation]. ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.

Leclerc, J., Wu, L., Noels, L., & Nguyen, V. D. (07 June 2016). Cohesive band model: a triaxiality-dependent cohesive model for damage to crack transition in a non-local implicit discontinuous Galerkin framework [Paper presentation]. ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., & Noels, L. (09 July 2015). A probabilistic multi-scale model for polycrystalline MEMS resonators [Paper presentation]. 9th European Solid Mechanics Conference, ESMC15, Madrid, Spain.

Wu, L., Adam, L., Doghri, I., & Noels, L. (06 July 2015). A Non-Local Damage-Enhanced Incremental-Secant Mean-Field-Homogenization For Composite Laminate Failure Predictions [Paper presentation]. 9th European Solid Mechanics Conference, ESMC15, Madrid, Spain.

Hoang Truong, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). A stochastic multiscale analysis for MEMS stiction failure [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). Propagation of uncertainties in the modelling of MEMS resonators (using a 3-scale probabilistic approach) [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., Mulay, S., & Noels, L. (25 February 2015). Propagation of uncertainties using probabilistic multi-scale models [Paper presentation]. Euromech 559 Multi-scale computational methods for bridging scales in materials and structures, Eindhoven, Netherlands.

Nguyen, V. D., & Noels, L. (29 August 2014). Computational homogenization of cellular materials with propagation of instabilities through the scales [Paper presentation]. EMMC14 - European Mechanics of Materials Conference 2014, Gothenburg, Sweden.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (27 August 2014). Prediction of meso-scale mechanical properties of poly-silicon materials [Paper presentation]. EMMC14 - European Mechanics of Materials Conference 2014, Gothenburg, Sweden.

Leblanc, C., Nguyen, V. D., Wan, F., Noels, L., & Béchet, E. (25 July 2014). Streamable Laguerre-Voronoi Tessellation Model for Tomographic Images [Paper presentation]. WCCM XI - ECCM V - ECFD VI Barcelona 2014, Barcelona, Spain.

Hoang Truong, V., Wu, L., Arnst, M., Golinval, J.-C., Muller, R., Voicu, R., & Noels, L. (26 June 2014). A probabilistic model of the adhesive contact forces between rough surfaces in the MEMS stiction context [Paper presentation]. 6th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Ghent, Belgium.

Wu, L., Nguyen, V. D., Adam, L., Doghri, I., & Noels, L. (06 June 2014). Muti-scale methods with strain-softening: damage-enhanced MFH for composite materials and computational homogenization for cellular materials with micro-buckling [Paper presentation]. The 4th International Symposium on Instabilities Across the Scales (IAS2014), Cachan, France.

Hoang Truong, V., Noels, L., & Wu, L. (December 2013). A micro-meso model to predict van der Walls and capillary induced stiction in micro-structures [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (December 2013). Probabilistic model for MEMS micro-beam resonance frequency made of polycrystalline linear anisotropic material [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore.

Wu, L., Noels, L., Adam, L., & Doghri, I. (December 2013). Non-Local Incremental-Secant Mean-Field-Homogenization of Damage-Enhanced Elasto-Plastic Composites [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore.

Nguyen, V. D., & Noels, L. (September 2013). Multi-scale studies of foamed materials [Paper presentation]. XII Computational Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XII), Barcelona, Spain.

Wu, L., Becker, G., & Noels, L. (June 2013). Modeling of damage to crack transition using a coupled discontinuous Galerkin/cohesive extrinsic law framework [Paper presentation]. 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2013), Prague, Czechia.

Wu, L., Noels, L., Adam, L., & Doghri, I. (June 2013). Non-local multiscale analyzes of composite laminates based on a damage-enhanced mean–field homogenization formulation [Paper presentation]. 17 th International Conference on Composite Structures (ICCS/17), Porto, Portugal.

Wu, L., Noels, L., Adam, L., & Doghri, I. (June 2013). An incremental-secant mean-field homogenization scheme for elasto-plastic and damage-enhanced elasto-plastic composite materials [Paper presentation]. 17 th International Conference on Composite Structures (ICCS/17), Porto, Portugal.

Wu, L., Tjahjanto, D., Makradi, A., Jérusalem, A., & Noels, L. (June 2013). A micro-model of the intra-laminar fracture in fiber-reinforced composites based on a discontinuous Galerkin/extrinsic cohesive law method [Paper presentation]. 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2013), Prague, Czechia.

Becker, G., & Noels, L. (11 July 2012). Full discontinuous Galerkin formulation of shells in large deformations with parallel and fracture mechanics applications [Paper presentation]. 10th World Congress on Computational Mechanics (WCCM2012), Sao-Paulo, Brazil.

Becker, G., & Noels, L. (July 2012). A one-field formulation of elasto-plastic shells with fracture applications [Paper presentation]. 8 th European Solid Mechanics Conference (ESMC2012), Graz, Austria.

Nguyen, V. D., & Noels, L. (July 2012). Multi-scale computational homogenization analysis of foams with micro-buckling [Paper presentation]. 10th World Congress on Computational Mechanics (WCCM 2012), Sao Paulo, Brazil.

Wu, L., Noels, L., Adam, L., & Doghri, I. (July 2012). Multiscale Simulations of Composites with Non-Local Damage-Enhanced Mean-Field Homogenization [Paper presentation]. 8 th European Solid Mechanics Conference (ESMC2012), Graz, Austria.

Wu, L., Noels, L., Adam, L., & Doghri, I. (July 2011). Multi‐scale modelling of fibre reinforced composite with non‐local damage variable [Paper presentation]. International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2011), Barcelona, Spain.

Becker, G., & Noels, L. (06 June 2011). A shell fracture framework based on a full discontinuous Galerkin formulation combined with an extrinsic cohesive law [Paper presentation]. International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2011), Barcelona, Spain.

Becker, G., & Noels, L. (21 July 2010). A Full Discontinuous Galerkin Formulation Of Euler Bernoulli Beams In Linear Elasticity With Fractured Mechanic Applications [Paper presentation]. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics (WCCM/APCOM2010), Sydney, Australia.

Kouznetsova, V., Coenen, E., Fioole, J., Noels, L., & Geers, M. (2010). Multi-scale computational homogenization for structured shells [Paper presentation]. IV European Conference on Computational Mechanics (ECCM2010), Paris, France.

Minnebo, H., Majérus, J., & Noels, L. (2010). Displacement Extrapolation Method : An alternative to J-integral for stress intensity factors computation using X-FEM [Paper presentation]. IV European Conference on Computational Mechanics (ECCM2010), Paris, France.

Noels, L. (2009). A One-Field Discontinuous Galerkin Formulation of Non-Linear Kirchhoff-Love Shells [Paper presentation]. 12th International ESAFORM Conference on Material Forming, Enschede, Netherlands.

Noels, L., & Radovitzky, R. (June 2008). A Discontinuous Galerkin Formulation of Kirchhoff-Love Shells: From Linear Elasticity to Finite Deformations [Paper presentation]. 8 th World Congress on Computational Mechanics (WCCM8) and the 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy.

Bolland, M., COLLIGNON, G., VANDENPLAS, X., Vueghs, P., Vandenrijt, J.-F., Kerschen, G., Bruls, O., Noels, L., Golinval, J.-C., Beckers, P., Rochus, P., & GRANVILLE, D. (2007). PARTICIPATION OF ULG STUDENTS TO THE SSETI MICROSATELLITE PROGRAMME USING SAMCEF [Paper presentation]. 10th SAMTECH Users Conference, Liège, Belgium.

Chandran, R. B., Noels, L., & Radovitzky, R. (2007). Development of discontinuous Galerkin method for linear strain gradient elasticity [Paper presentation]. 9th US National Congress on Computational Mechanics, San Fransisco, United States.

Noels, L., & Radovitzky, R. (2007). A New Discontinuous Galerkin Formulation for Kirchhoff-Love Shells [Paper presentation]. 9th US National Congress on Computational Mechanics, San Fransisco, United States.

Vandenrijt, J.-F., Rochus, P., Kerschen, G., Vueghs, P., Bruls, O., & Noels, L. (2007). LEODIUM project and student space activities at the University of Liege [Paper presentation]. 2ND EUROPEAN CONFERENCE FOR AEROSPACE SCIENCES (EUCASS), Brussels, Belgium.

Noels, L., Chandran, R. B., & Radovitzky, R. (2006). A New Discontinuous Galerkin Formulation for Non-Linear Elasticity [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States.

Noels, L., & Radovitzky, R. (2006). Numerical simulation of blaststructure interaction [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States.

Noels, L., Stainier, L., & Ponthot, J.-P. (2006). An energy momentum conserving algorithm using the incremental potential for visco-plasticity [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States.

Noels, L., Stainier, L., & Ponthot, J.-P. (July 2004). Simulation of complex impact problems with implicit time algorithms: Application to a turbo - engine blade loss problem [Poster presentation]. 5th International Symposium on Impact Engineering, Cambridge, United Kingdom.

Books

As editor or director

Hogge, M., Van Keer, R., Dick, E., Malengier, B., Slodicka, M., Béchet, E., Geuzaine, C., Noels, L., & Remacle, J.-F. (Eds.). (2011). Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011). (Dépôt légal: D/2011/0480/31). Liège, Belgium: ULg - Université de Liège.

Hogge, M., Van Keer, R., Noels, L., Stainier, L., Ponthot, J.-P., Remacle, J.-F., & Dick, E. (Eds.). (2008). Actes du Congrès ACOMEN 2008, Second international Conference on Advanced Computational Methods in Engineering, Liège, Belgium, May 26-38, 2008.

Book chapters and contributions to collective works

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2017). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In L. V. Starman, J. Hay, ... N. Karanjgaokar (Eds.), Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (Springer International Publishing, pp. 1-8). New York, United States: The Society for Experimental Mechanics, Inc. doi:10.1007/978-3-319-42228-2_1

Noels, L., Wu, L., Adam, L., Seyfarth, J., Soni, G., Segurado, J., Laschet, G., Chen, G., Lesueur, M., Lobos, M., Böhlke, T., Reiter, T., Oberpeilsteiner, S., Sallaberger, D., Weichert, D., & Broekmann, C. (2016). Chapter 6: Effective Properties. In P. Ulrich & G. J. Schmitz (Eds.), Handbook of Software Solutions for ICME (pp. 433-441). Weinheim, Germany: Wiley-VCH. doi:10.1002/9783527693566

Wu, L., Golinval, J.-C., & Noels, L. (2013). Stiction Failure in Microswitches Due to Elasto-Plastic Adhesive Contacts. In G. Shaw, B. Prorok, ... L. Starman (Eds.), MEMS and Nanotechnology, Volume 6 (pp. 67-74). Springer. doi:10.1007/978-1-4614-4436-7_11

Wu, L., Noels, L., Adam, L., & Doghri, I. (2013). Non-local Damage-Enhanced MFH for Multiscale Simulations of Composites. In E. Patterson, D. Backman, ... G. Cloud (Eds.), Composite Materials and Joining Technologies for Composites, Volume 7 (pp. 115-121). Springer. doi:10.1007/978-1-4614-4553-1_13

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2011). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In T. Proulx (Ed.), MEMS and Nanotechnology, Volume 2 (pp. 189-195). New York, United States - New York: Springer. doi:10.1007/978-1-4419-8825-6_27

Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2003). A new formulation of internal forces for non-linear hypoelastic constitutive models verifying conservation laws. In K. J. Bathe (Ed.), Computational Fluid and Solid Mechanics 2003 (pp. 527-531). Elsevier. doi:10.1016/B978-008044046-0.50130-5

Theses and dissertations

Doctoral thesis

Noels, L. (2004). Contributions aux algorithmes d'intégration temporelle conservant l'énergie en dynamique non-linéaire des structures [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/402

Master dissertations

Noels, L. (2000). Determination automatique de la taille du pas de temps pour les schémas implicites en dynamique non-linéaire [Master’s dissertation, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/401

Learning materials

Others

Noels, L. (2009). Ça plane pour toi …: Manuel d’aérodynamisme de base à l’attention des élèves du secondaire supérieur.

Other publications and communications

Articles in scientific journals without peer reviewing

Noels, L. (2022). Toward stochastic multi-scale methods in continuum solid mechanics. Advances in Applied Mechanics, 55, 1-254. doi:10.1016/bs.aams.2022.03.001

Noels, L. (01 August 2009). A one-field discontinuous Galerkin formulation of non-linear Kirchhoff-Love shells. International Journal of Material Forming, 2 (Suppl. 1), 877-880. doi:10.1007/s12289-009-0448-2