Publications and communications of Angélique Léonard

Ben Hamed, H., Salmon, T., Hetty Kleinjan, Gilles Quabron, Jean-François Gérard, Léonard, A., & Toye, D. (11 November 2022). Traitement des boues d’épuration par les microalgues indigènes: élimination des agents pathogènes et production de la biomasse. Poster session presented at 18ème congrès de la Société Française de Génie des Procédés, Toulouse, France.

Groslambert, S., Chantrain, G., Ka, M., Courard, L., & Léonard, A. (November 2022). Analyse du cycle de vie de nouveaux mortiers contenant des argiles calcinées comme additions : le projet CO2REDRES. Paper presented at Nomad 2022, Montpellier, France.

Groslambert, S., Léonard, A., & Courard, L. (November 2022). Life cycle assessment of 3D printed furniture using fine recycled aggregates – Cirmap project. Poster session presented at Nomad 2022, Montpellier, France.

Léonard, A. (2022). L’analyse de cycle de vie de produits plastiques recyclés. Paper presented at Webinaire mensuel de veille technologique.

Groslambert, S., & Léonard, A. (2022). Analyses de cycles de vie (ACV) de produits en pierres régionales. Paper presented at La pierre wallonne : la solution pour construire durable !, Sprimont, Belgium.

Chantrain, G., Groslambert, S., & Léonard, A. (09 May 2022). Environmental evaluation of phosphorus recovery processes from wastewater sludge using life cycle assessment. Poster session presented at SETAC EUROPE 2022, Copenhague, Denmark.

Groslambert, S., Chantrain, G., & Léonard, A. (May 2022). Life cycle assessment of 3D printed furniture using fine recycled aggregates – Cirmap project. Poster session presented at SETAC EUROPE 2022, Copenhague, Denmark.

Ben Hamed, H., Salmon, T., Toye, D., & Léonard, A. (28 April 2022). Amélioration de la floculation des boues traitées par des microalgues en modifiant le profil des substances polymériques extracellulaires et la structure des flocs. Poster session presented at Journée internationale des femmes et des filles de science, Namur, Belgium.

Shariff, Z. A., Leleu, D., Léonard, A., & Pfennig, A. (April 2022). Recovery of Phosphorus from Dried Sewage Sludge and Subsequent Purification using Reactive Extraction. Paper presented at Wastewater, Water and Resource Recovery, Poznan, Poland.

Lechanteur, A., Plougonven, E., Orozco Ardila, L., Gresse, E., Lumay, G., Vandewalle, N., Léonard, A., & Evrard, B. (25 March 2022). Engineered-inhaled particles: influence of carbohydrates excipients nature on powder properties and behavior. Poster session presented at PBP world meeting 2022.

Pfennig, A., Chantrain, G., Groslambert, S., Shariff, Z. A., Leleu, D., & Léonard, A. (2022). Le projet Phos4you. Paper presented at FSA Faculty Day, Liège, Belgium.

Groslambert, S., & Léonard, A. (2022). B-EPD : Pierres et Marbres de Belgique - Grès du Bois d'Anthines - Pavé platine (B-EPD n° 22-0145-001).

Khama, R., Aissani-Benissad, F., Alkama, R., Fraikin, L., & Léonard, A. (2022). Modeling of drying thin layer of tomato slices using solar and convective driers. Agricultural Engineering International: CIGR Journal, 24 (1), 287-298.

Lechanteur, A., Plougonven, E., Orozco, L., Lumay, G., Vandewalle, N., Léonard, A., & Evrard, B. (2022). Engineered-inhaled particles: Influence of carbohydrates excipients nature on powder properties and behavior. International Journal of Pharmaceutics, 121319. doi:10.1016/j.ijpharm.2021.121319

Li, J., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (2022). Influence of back-mixing on the convective drying of sewage sludge: The structural characteristics. Drying Technology, 40 (1), 205–212. doi:10.1080/07373937.2020.1781159

Ben Hamed, H., Toye, D., & Léonard, A. (25 November 2021). Contribution to the development of a "low cost" process for sewage sludge stabilization. Poster session presented at 7ème Edition Wallonie/Hauts-de-France de la Journée des Jeunes Chercheurs, Dunkerque, France.

Parra Angarita, S. L., & Léonard, A. (25 November 2021). Vers une meilleure compréhension du séchage des boues à travers ses propriétés rhéologiques. Poster session presented at Journée des Jeunes Chercheurs 2021, Dunkerque, France.

Léonard, A. (2021). From sludge drying to LCA: 20 years of activities at ULiège. Paper presented at Séminaire dans le cadre du cours 'Ethique' de Roland Urbain, Virton, Belgium.

Léonard, A., Groslambert, S., & Chantrain, G. (21 September 2021). LCA of phosphorous recovery technologies from sewage sludge. Poster session presented at Final conference in Essen : Phos4You project, Essen, Germany.

Shariff, Z. A., Leleu, D., Léonard, A., & Pfennig, A. (21 September 2021). PULSE process demonstrator trials. Paper presented at Phos4You final conference, Essen, Germany.

Shariff, Z. A., Leleu, D., Léonard, A., & Pfennig, A. (2021). Demonstrator I3: Acid leaching of P from partially/fully dried sewage sludge (PULSE). In M.-E. Ploteau, A. Althoff, I. Nafo, ... B. Teichgräber, Technical report of the Phos4You partnership on processes to recover phosphorus from wastewater (pp. 122 - 161). Germany: Duisburg-Essen Publications online. doi:10.17185/duepublico/74788

Dumont, O., Léonard, A., & Lemort, V. (2021). Life cycle analysis of a Carnot battery based on a Rankine cycle (Pumped thermal energy storage). Paper presented at ECOS 2021.

Groslambert, S., & Léonard, A. (2021). B-EPD : ISOHEMP PAL36 – Bloc de béton chanvre (B-EPD n° 21-0078-001.00.00).

Lefebvre, L., Compère, P., Léonard, A., Plougonven, E., Vandewalle, N., & Gobert, S. (2021). Mediterranean aegagropiles from Posidonia oceanica (L.) Delile (1813): a first complete description from macroscopic to microscopic structure. Marine Biology, 168:37, 1-17. doi:10.1007/s00227-021-03833-y

Pfennig, A., Shariff, Z. A., Leleu, D., & Léonard, A. (2021). PULSE, for recovering phosphorus from our wastewater. Liège, Belgium: University of Liège.

Ralaizafisoloarivony, N. A., Degré, A., Léonard, A., Toye, D., Mercatoris, B., & Charlier, R. (2021). A First Insight on the Interaction between Desiccation Cracking and Water Transfer in a Luvisol of Belgium. Soil Systems, 5 (4), 64. doi:10.3390/soilsystems5040064

Santiago, A. P., Sandoval Torres, S., Léonard, A., Plougonven, E., Díaz-González, M., & Hernández-Bautista, E. (2021). Numerical simulation and microtomography study for drying a deformable isodiametric-cellular food. International Journal of Food Engineering, 17 (10), 771–782. doi:10.1515/ijfe-2021-0108

Théatre, A., Cano-Prieto, C., Bartolini, M., Laurin, Y., Deleu, M., Niehren, J., Fida, T., Gerbinet, S., Alanjary, M., Medema, M. H., Léonard, A., Lins, L., Arabolaza, A., Gramajo, H., Gross, H., & Jacques, P. (2021). The Surfactin-Like Lipopeptides From Bacillus spp.: Natural Biodiversity and Synthetic Biology for a Broader Application Range. Frontiers in Bioengineering and Biotechnology, 9, 118. doi:10.3389/fbioe.2021.623701

Shariff, Z. A., Léonard, A., & Pfennig, A. (2020). Phosphorus flows, recovery and recycling from wastewater. Paper presented at EIT RawMaterials PhD Winter School on Entrepreneurship in the Circular Economy.

Gerbinet, S., & Léonard, A. (26 November 2020). Life Cycle Assessment of Wheat production: Influence of nutrient supply. Paper presented at European Sustainable Nutrient Initiative - ESNI 2020.

Groslambert, S., & Léonard, A. (26 November 2020). Challenges associated to the LCA of P-recovery from wastewater and sludges in the context of Phos4You project. Paper presented at European Sustainable Nutrient Initiative - ESNI 2020 - Life Cycle Assessment of Technologies for Nutrient Recycling and Production of Biobased Fertilisers – Can we Develop Common Standards?, Ghent, Belgium.

Gerbinet, S., Groslambert, S., & Léonard, A. (04 May 2020). Life Cycle Assessment of wheat production in France: impact of mineral and organic fertilizers. Poster session presented at SETAC Europe 30th annual meeting.

Merchan Arribas, A., Belboom, S., & Léonard, A. (April 2020). Life cycle assessment of rail freight transport in Belgium. Clean Technologies and Environmental Policy, 22, 1109–1131. doi:10.1007/s10098-020-01853-8

Shariff, Z. A., Fraikin, L., Léonard, A., & Pfennig, A. (27 February 2020). Development of SLL equilibrium speciation and data fitting tool and its application to P recovery process from sludge. Paper presented at Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik, Adsorption und Extraktion, Berchtesgaden, Germany.

Ralaizafisoloarivony, N. A., Tran, D. K., Degré, A., Mercatoris, B., Léonard, A., Toye, D., & Charlier, R. (2020). Experimental and Numerical Investigation of the Drying of an Agricultural Soil. E3S Web of Conferences. doi:10.1051/e3sconf/202019501034

Simo-Tagne, M., Bennamoun, L., Léonard, A., & Rogaume, Y. (2020). Modeling, numerical simulation and validation of a convective dryer in steady conditions: case study of tropical woods. International Journal of Modelling and Simulation, 40 (2), 143-161. doi:10.1080/02286203.2019.1575111

Zhao, Z., Courard, L., Groslambert, S., Jehin, T., Léonard, A., & Xiao, J. (2020). Use of recycled concrete aggregates from precast block for the production of new building blocks: an industrial scale study. Resources, Conservation and Recycling, 157 (104786). doi:10.1016/j.resconrec.2020.104786

Gerbinet, S., Van Stappen, F., & Léonard, A. (02 December 2019). Water footprint and regionalization: the case study of Walloon corn. Paper presented at FNRS – LCA Contact Group Meeting.

Groslambert, S., & Léonard, A. (02 December 2019). Circular economy of buildings: Leroy Merlin case study. Paper presented at 5th FNRS LCA Meeting, Liège, Belgium.

Gerbinet, S., Van Stappen, F., & Léonard, A. (26 November 2019). Water footprint and regionalization: the case study of Walloon corn. Paper presented at Computer Aided Process Engineering FORUM 2019 – CAPE 2019.

Groslambert, S., & Léonard, A. (26 November 2019). Evaluation of the benefits of circular economy – Life Cycle Assessment of Derbigum recycling unit. Paper presented at CAPE Forum, Liège, Belgium.

Shariff, Z. A., Pfennig, A., Fraikin, L., & Léonard, A. (25 November 2019). Development of SLL speciation, equilibrium and data fitting tool and its application to P recovery process from sludge. Paper presented at Computer-Aided Process Engineering (CAPE), Liège, Belgium.

Groslambert, S., & Léonard, A. (07 November 2019). VALORIZATION OF CONSTRUCTION AND DEMOLITION WASTE, A ROUTE TO CIRCULAR ECONOMY: THE VALDEM PROJECT. Paper presented at [avniR] Conference 2019, Villeneuve d'Ascq - Lille, France.

Shariff, Z. A., Pfennig, A., Léonard, A., & Fraikin, L. (16 October 2019). Recovery of Phosphorus from Sewage Sludge and Subsequent Purification Using Reactive Extraction. Paper presented at 17ème Congrès de la Société Française de Génie des Procédés, Nantes, France.

Shariff, Z. A., Bogdan, A., Fraikin, L., Michels, E., Léonard, A., Meers, E., Pfennig, A., & Durand, B. (08 October 2019). PULSE PROCESS: RECOVERY OF PHOSPHORUS FROM SLUDGE AND ITS PRODUCT QUALITY ASSESSMENT. Poster session presented at The 5th European Conference on Sludge Management, Liége, Belgium.

Shariff, Z. A., Fraikin, L., Léonard, A., & Pfennig, A. (08 October 2019). PHOSPHORUS RECOVERY FROM DRIED SLUDGE WITH REACTIVE EXTRACTION TO REMOVE IMPURITIES. Paper presented at The 5th European Conference on Sludge Management, Liège, Belgium.

Shariff, Z. A., Fraikin, L., Léonard, A., & Pfennig, A. (17 September 2019). Recovery of Phosphorus from Sewage Sludge and Subsequent Purification Using Reactive Extraction. Paper presented at The 12th EUROPEAN CONGRESS OF CHEMICAL ENGINEERING (ECCE12), Florence, Italy.

Ralaizafisoloarivony, N. A., Degré, A., Mercatoris, B., Léonard, A., Toye, D., & Charlier, R. (02 September 2019). Assessing soil crack dynamics during dryings from reduced tillage and conventional tillage fields. Poster session presented at TERRAenVISION 2019, Barcelone, Spain.

Gerbinet, S., Romano, A.-P., Caldarella, G., Job, N., Groslambert, S., & Léonard, A. (September 2019). LCA of a fuel cell using gold for the bipolar plates. Paper presented at 9th LCM Conference Series, Poznan, Poland.

Fraikin, L., Wuidar, P., & Léonard, A. (11 July 2019). INFLUENCE OF SLUDGE CONDITIONING AND DEWATERING ON CONVECTIVE DRYING AT INDUSTRIAL SCALE. Poster session presented at EuroDrying'2019 - 7th European Drying Conference, Torino, Italy.

Kahlerras, L., Belhamri, A., Fraikin, L., Michel, F., Courard, L., & Léonard, A. (11 July 2019). Determination of sorption isotherm of mortar and modeling of water diffusivity. Poster session presented at EuroDrying'2019 - 7th European Drying Conference, Torino, Italy.

Tran, D. K., Ralaizafisoloarivony, N. A., Degré, A., Léonard, A., Mercatoris, B., Toye, D., & Charlier, R. (10 July 2019). DRYING BEHAVIOUR AND WATER TRANSPORT MECHANISMS DURING EVAPORATION OF AN AGRICULTURAL SOIL. Paper presented at EuroDrying'2019 - 7th European Drying Conference, Torino, Italy.

Gerbinet, S., Van Stappen, F., & Léonard, A. (28 May 2019). Water footprint and regionalization: the case study of Walloon corn. Poster session presented at SETAC Europe 29th annual meeting.

Groslambert, S., & Léonard, A. (20 May 2019). ATISOL C2C - Ecodesign of a "vapour and air barrier membrane" made of renewable materials. Paper presented at SAM13, Pisa, Italy.

Léonard, A. (2019). Le casse-tête de l’emballage : Comment s’orienter vers des solutions durables ? Paper presented at Keyfood annual event, Mons, Belgium.

Merchan Arribas, A., Léonard, A., Limbourg, S., & Mostert, M. (February 2019). Life cycle externalities versus external costs: the case of inland freight transport in Belgium. Transportation Research. Part D, Transport and Environment, 67, 576-595. doi:10.1016/j.trd.2019.01.017

Shariff, Z. A., Fraikin, L., Léonard, A., & Pfennig, A. (February 2019). Recovery of Phosphorus from Sewage Sludge and Subsequent Purification Using Reactive Extraction. Poster session presented at Jahrestreffen der ProcessNet-Fachgruppen Phytoextrakte und Extraktion, Muttenz, Switzerland.

Gerbinet, S., Van Stappen, F., Belboom, S., Pezennec, E., & Léonard, A. (2019). Impact of heavy metals on human toxicity using LCA: The case study of Walloon corn. Matériaux et Techniques, 107 (1). doi:10.1051/mattech/2019010

Hubert, J., Léonard, A., Plougonven, E., & Collin, F. (2019). RESORCINOL FORMALDEHYDE HYDROGEL DRYING BEHAVIOR: DESICCATION CRACKING MODELING. In A. Baressi (Ed.), Proceedings of the 7th European Drying Conference (pp. 68-75).

Léonard, A. (2019). Special issue dedicated to selected papers presented at the 6th European Drying Conference (EuroDrying 2017). Drying Technology. doi:10.1080/07373937.2018.1465729

Léonard, A., Fraikin, L., Plougonven, E., & Toye, D. (2019). X-RAY COMPUTED TOMOGRAPHY: AN OUTSTANDING VISUALISATION TOOL FOR DRYING RESEARCH – Feedback on the last 20 years at University of Liège. In A. Barresi (Ed.), Proceedings of the 7th European Drying Conference (pp. 172-179).

Li, J., Wu, C.-W., Fraikin, L., Salmon, T., Toye, D., Nistajakis, E., & Léonard, A. (2019). Convective drying of sawdust-sludge mixtures: The effect of the sludge matrix. Drying Technology, 37 (7), 920–927. doi:10.1080/07373937.2018.1480027

Muller, J., Duray, E., Lejeune, M., DUBOIS, S., Plougonven, E., Léonard, A., Storti, P., Giuliani, N., Cohen-Solal, M., Hempel, U., Thijssen, V., BEGUIN, Y., Heusschen, R., & CAERS, J. (2019). Loss of stromal galectin-1 enhances multiple myeloma development: Emphasis on a role in osteoclasts. Cancers, 11 (2), 261. doi:10.3390/cancers11020261

Simo-Tagne, M., Bennamoun, L., Léonard, A., & Rogaume, Y. (2019). Determination and modeling of the isotherms of adsorption/desorption and thermodynamic properties of obeche and lotofa using nelson’s sorption model. Heat and Mass Transfer, 55, 2185–2197. doi:10.1007/s00231-019-02577-2

Simo-Tagne, M., Bonoma, B., Bennamoun, L., Monkam, L., Léonard, A., Zoulalian, A., & Rogaume, Y. (2019). Modeling of coupled heat and mass transfer during drying of ebony wood using indirect natural convection solar dryer. Drying Technology. doi:10.1080/07373937.2018.1544144

Tran, D. K., Ralaizafisoloarivony, N. A., Charlier, R., Mercatoris, B., Léonard, A., Toye, D., & Degré, A. (2019). Studying the effect of desiccation cracking on the evaporation process of a Luvisol – From a small-scale experimental and numerical approach. Soil and Tillage Research, 193, 142-152. doi:10.1016/j.still.2019.05.018

Lefebvre, L., Gobert, S., Compère, P., Vandewalle, N., Léonard, A., & Plougonven, E. (10 December 2018). How does endophytic fungi transform the Posidonia oceanica (L.) Delile (1813) meadow into the aegagropiles? Poster session presented at CAREM, Liège, Belgium.

Groslambert, S., Léonard, A., & Gerbinet, S. (Other coll.). (06 December 2018). VALORIZATION OF CONSTRUCTION, DEMOLITION AND INDUSTRIAL WASTE, A ROUTE TO CIRCULAR ECONOMY. Paper presented at 4th FNRS LCA Meeting, Bruxelles, Belgium.

Groslambert, S., Léonard, A., Courard, L. (Other coll.), Zhao, Z. (Other coll.), & Breuil, R. (Other coll.). (November 2018). VALORIZATION OF CONSTRUCTION AND DEMOLITION WASTE, A ROUTE TO CIRCULAR ECONOMY: THE VALDEM PROJECT VALORISATION DES DÉCHETS DE CONSTRUCTION ET DE DÉMOLITION, UNE VOIE VERS L'ÉCONOMIE CIRCULAIRE : LE PROJET VALDEM. Paper presented at [avniR] Conference 2018, Lille, France.

Merlo, A., Léonard, A., & Léonard, G. (29 October 2018). Technological, economical and environmental evaluation of pulsed plasma deposition as a joint application of viability assessemnt methods. Poster session presented at GEPROC Day.

Tran, D. K., Ralaizafisoloarivony, N., Charlier, R., Mercatoris, B., Léonard, A., Toye, D., & Degré, A. (October 2018). Effect of desiccation cracking on the fluid transfer process in agricultural soil. Poster session presented at Alert Geomaterials Workshop, Aussois, France.

Gerbinet, S., Van Stappen, F., Belboom, S., Pezennec, E., & Léonard, A. (26 September 2018). Organic or conventional wheat: what is the better choice to limit the environmental impact, especially human toxicity? Paper presented at SETAC Europe 24th LCA symposium, Vienne, Austria.

Fraikin, L., Shariff, Z. A., Pfennig, A., & Léonard, A. (13 September 2018). INFLUENCE OF DRYING ON THE RECOVERY OF PHOSPHORUS FROM WASTEWATER SLUDGE. Poster session presented at IDS2018 - International Drying Symposium, Valencia, Spain.

Tran, D. K., Ralaizafisoloarivony, N. A., Charlier, R., Mercatoris, B., Léonard, A., Toye, D., & Degré, A. (September 2018). Studying the effect of desiccation cracking on the hydraulic behavior of a Luvisol-From an experimental and numerical approach. Paper presented at 21st International Soil Tillage Research Organization (ISTRO), Paris, France.

Boutillara, Y., Lodewyckx, P., Richelet, L., & Léonard, A. (July 2018). Kinetics of water adsorption on activated carbons. Poster session presented at Carbon 2018, Madrid, Spain.

Léonard, A. (19 June 2018). Etat de lieux des programmes de recherches sur les boues de station d’épuration en Europe. Paper presented at Evolution de la place et du rôle des boues de station d'épuration et des boues de dragage en Wallonie : enjeux économiques, environnementaux, énergétiques et agronomiques, Moulin de Beez (Namur), Belgium.

Fraikin, L., Pambou, Y.-B., Salmon, T., & Léonard, A. (24 May 2018). Enhancement of dewatering and drying behavior of activated sludge when using PAX coagulant for conditioning. Paper presented at SMICE 2018 - Sludge Management In Circular Economy, Rome, Italy.

Fraikin, L., Clermont, Q., Salmon, T., & Léonard, A. (23 May 2018). Efficiency of biobased coagulant for the conditioning urban residual wastewater sludge. Paper presented at SMICE 2018 - Sludge Management In Circular Economy, Rome, Italy.

Fraikin, L., & Léonard, A. (23 May 2018). Phos4You: a NW Europe Interreg project aiming at recovering phosphorus from wastewater and wastewater sludge. Poster session presented at SMICE 2018 - Sludge Management In Circular Economy, Rome, Italy.

Gerbinet, S., Van Stappen, F., Belboom, S., Pezennec, E., & Léonard, A. (22 May 2018). IMPACT OF HEAVY METALS ON HUMAN TOXICITY USING LCA: A CASE STUDY FOR WALLOON CORN. Paper presented at SAM 12, Metz, France.

Gerbinet, S., Van Stappen, F., Belboom, S., Pezennec, E., & Léonard, A. (15 May 2018). Impact of heavy metals on human toxicity using LCA: a case study for Walloon corn. Poster session presented at Impact of heavy metals on human toxicity using LCA: a case study for Walloon corn, Rome, Italy.

Groslambert, S., Léonard, A., Roy, A. (Other coll.), Breuil, R. (Other coll.), & Pasquet, V. (Other coll.). (May 2018). VALDEM PROJECT: FROM LCA OF DEMOLITION WASTE TO CIRCULAR ECONOMY OF BUILDINGS. Paper presented at SAM12, Metz, France.

Groslambert, S., Tilman, A., Léonard, A., Getlicherman, M. (Other coll.), Colson, B. (Other coll.), & De Vilder, I. (Other coll.). (May 2018). ATISOL C2C - Life cycle assessment as a tool for ecodesigning a "vapour and air barrier membrane – insulator" system, in a cradle to cradle approach. Poster session presented at SETAC Europe - 28th Annual Meeting, Roma, Italy.

Merchan Arribas, A., Belboom, S., & Léonard, A. (May 2018). Environmental impact assessment of rail freight intermodality in Belgium using the Life Cycle Assessment (LCA) methodology. Poster session presented at SETAC Europe 28th Annu-al Meeting, Rome, Italy.

Smet, S., Beckers, E., Plougonven, E., Léonard, A., & Degré, A. (23 April 2018). Can the pore scale geometry explain soil sample scale hydrodynamic properties? Frontiers in Environmental Science, 6 (20). doi:10.3389/fenvs.2018.00020

Lefebvre, L., Gobert, S., Compère, P., Vandewalle, N., Léonard, A., & Plougonven, E. (11 April 2018). Structures macroscopique et microscopique et formation des aegagropiles de Posidonia oceanica (L.) Delile (1813). Poster session presented at Laurence Lefebvre, Calvi, France.

Smet, S., Beckers, E., Plougonven, E., Léonard, A., & Degré, A. (11 April 2018). Visualization with X-ray microtomography of soil samples under a growing draining pressure. Poster session presented at European Geosciences Union - General Assembly 2018, Vienne, Austria.

Merchan Arribas, A., Belboom, S., & Léonard, A. (2018). Study of an international intermodal freight route based on an Environmental Life Cycle Assessment perspective. In Proceedings of the 4th international conference on Logistics Operations Management.

Fraikin, L., & Léonard, A. (28 March 2018). Valorization strategies for wastewater treatment sludge. Paper presented at Environ2018, Cork, Ireland.

Hubert, J., Plougonven, E., Prime, N., Léonard, A., & Collin, F. (2018). Comprehensive study of the drying behavior of Boom clay:Experimental investigation and numerical modeling. International Journal for Numerical and Analytical Methods in Geomechanics. doi:10.1002/nag.2715

Muller, J., Bolomsky, A., Dubois, S., Duray, E., Stangelberger, K., Plougonven, E., Lejeune, M., Léonard, A., Marty, C., Hempel, U., Baron, F., BEGUIN, Y., Cohen-Solal, M., Ludwig, H., Heusschen, R., & CAERS, J. (2018). Maternal embryonic leucine zipper kinase inhibitor OTSSP167 has preclinical activity on multiple myeloma bone disease. Haematologica, 103, 1359-1368. doi:10.3324/haematol.2017.185397

Smet, S., Plougonven, E., Léonard, A., Degré, A., & Beckers, E. (2018). X-ray µCT: how soil pore space description can be altered by image processing. Vadose Zone Journal, 17 (1). doi:10.2136/vzj2016.06.0049

Troch, F., Vanelslander, T., Sys, C., Verhoest, K., Tawfik, C. M. F., Limbourg, S., Merchan, A., & Léonard, A. (2018). Transversal assessment of new intermodal strategies : deliverable D 7.2, synthesis and recommendations. (Brain-Trains ; D 7.2). Belspo.

Troch, F., Vanelslander, T., Sys, C., Verhoest, K., Tawfik, C., Limbourg, S., Merchan Arribas, A., & Léonard, A. (2018). Transversal assessment of new intermodal strategies : deliverable D 7.1, synopsis. Belspo.

van Stappen, F., Mathot, M., Loriers, A., Delcour, A., Stilmant, D., Planchon, V., Bodson, B., Léonard, A., & Goffart, J.-P. (2018). Sensitive parameters in local agricultural life cycle assessments: the illustrative case of cereal production in Wallonia, Belgium. International Journal of Life Cycle Assessment, 23 (2), 225-250. doi:10.1007/s11367-017-1325-8

Merchan Arribas, A., Belboom, S., & Léonard, A. (2017). Life Cycle Assessment of railway infrastructure in Belgium. In [avniR] conference. Life Cycle Management, the pathway for ecotransition. 2017 Conference proceedings (pp. 159-162).

Léonard, G., Belboom, S., Toye, D., Dumont, M.-N., Léonard, A., & Heyen, G. (2017). Recent Evolutions and Trends in the Use of Computer Aided Chemical Engineering for Educational Purposes at the University of Liège. Computer Aided Chemical Engineering. doi:10.1016/B978-0-444-63965-3.50492-X

Groslambert, S., Léonard, A., & Finet, S. (06 September 2017). Environmental impact of food waste treatment in an EcoCleaner, a portable accelerated composter. Poster session presented at LCM 2017, Luxembourg, Luxembourg.

Merchan Arribas, A., Belboom, S., & Léonard, A. (04 September 2017). Poster Life Cycle Assessment of intermodal freight transport in Belgium. Poster session presented at LCM 2017 - 8th International Conference on Life Cycle Management, Luxembourg, Luxembourg.

Roy, A., Groslambert, S., Pasquet, V., & Léonard, A. (04 September 2017). LCM of construction waste towards circular economy of buildings: VALDEM project. Poster session presented at LCM 2017, Luxembourg, Luxembourg.

Fraikin, L., Pambou, Y.-B., Salmon, T., & Léonard, A. (07 July 2017). EVOLUTION OF SLUDGE INTERNAL STRUCTURE DURING DRYING: EFFECT OF THE CONDITIONING CONDITIONS. Paper presented at BENELUX Young Water Professionals, Ghent, Belgium.

Fraikin, L., Clermont, Q., Salmon, T., & Léonard, A. (06 July 2017). STUDY OF ACTIVATED SLUDGE DEWATERING : USING BIOBASED COAGULANTS. Poster session presented at BENELUX Young Water Professionals, Ghent, Belgium.

Hubert, J., Plougonven, E., Léonard, A., & Collin, F. (July 2017). Study of the Drying Behavior of Resorcinol Formaldehyde Hydrogels : Experimental Investigation and Numerical Framework. Paper presented at 6𝑡ℎ Biot Conference on Poromechanics , Paris, France.

Khama, R., Aissani, F., Alkama, R., Li, J., Fraikin, L., Plougonven, E., & Léonard, A. (21 June 2017). STUDY BY X-RAY MICROTOMOGRAPHY OF THE TOMATO SLICES SHRINKAGE DURING THE CONVECTIVE DRYING. Poster session presented at EuroDrying’2017 – 6th European Drying Conference, Liège, Belgium.

Khama, R., Aissini, F., Alkama, R., Fraikin, L., & Léonard, A. (21 June 2017). ISOTHERMS AND ISOSTERIC HEAT OF DESORPTION OF WATERMELON FRUIT. Poster session presented at EuroDrying’2017 – 6th European Drying Conference, Liège, Belgium.

Léonard, A. (21 June 2017). Conclusions of the 6th European Drying Conference. Paper presented at 6th European Drying Conference, Liège, Belgium.

Fraikin, L., Pambou, Y. B., Salmon, T., & Léonard, A. (20 June 2017). Impact of conditioning on sludge internal structure evolution during drying. Paper presented at Eurodrying 2017, Liège, Belgium.

Fraikin, L., Salmon, T., & Léonard, A. (19 June 2017). DEVELOPMENT OF A MULTISCALE CONVECTIVE LABSCALE DRYER. Poster session presented at Eurodryin 2017, Liège, Belgium.

Hubert, J., Plougonven, E., Léonard, A., & Collin, F. (19 June 2017). Convective drying : experimental campaign and numerical modelling. Paper presented at 6𝑡ℎ European Drying Conference, Liège, Belgium.

Li, J., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (19 June 2017). STUDY ON THE STRUCTURAL EVOLUTION OF SEWAGE SLUDGE DURING CONVECTIVE DRYING. Poster session presented at Eurodrying 2017, Liège, Belgium.

Plougonven, E., Hubert, J., Collin, F., & Léonard, A. (19 June 2017). Tomographic image analysis in drying applications. Paper presented at 6th European Drying Conference, Liège, Belgium.

Léonard, G., Belboom, S., Ali, S., Heyen, G., Puerari, F., & Léonard, A. (June 2017). Coupling LCA and techno-economic analysis for a sound evaluation and fair comparison of processes sustainability. Paper presented at Workshop on Benchmarking LCA for CCU applications, Bruxelles, Belgium.

Gerbinet, S., Briard, V., Pigeolet, J.-P., Belboom, S., Groslambert, S., & Léonard, A. (15 May 2017). Use of a bio-based binder in the building sector. Poster session presented at 11th SAM Conference.

Groslambert, S., Léonard, A., Getlicherman, M. (Other coll.), Colson, B. (Other coll.), De Vilder, I. (Other coll.), & Tilman, A. (Other coll.). (15 May 2017). Ecodesign of a “vapour and air barrier membrane – insulator” system, following a cradle-to-cradle approach – ATISOL C2C. Poster session presented at SAM11, Trondheim, Norway.

Groslambert, S., & Léonard, A. (10 May 2017). Life Cycle in Practice – Helping SMEs to integrate life cycle approach in their policy. Poster session presented at SETAC Europe - 27th Annual Meeting, Bruxelles, Belgium.

Parvin, N., Beckers, E., Plougonven, E., Léonard, A., & Degré, A. (10 May 2017). Dynamic of soil drying close to saturation: What can we learn from a comparison between X-ray computed microtomography and the evaporation method? Geoderma, 302. doi:10.1016/j.geoderma.2017.04.027

Gerbinet, S., Belboom, S., & Léonard, A. (08 May 2017). Glucose production: influence of the datasets and of the long term emissions on LCA results. Poster session presented at 27th SETAC EUROPE, Bruxelles, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (May 2017). Poster Life Cycle Assessment of freight transport in Belgium. Poster session presented at SETAC Europe 27th Annual Meeting, Brussels, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (2017). Life Cycle Assessment of freight transport in Belgium. In M. Cools & S. Limbourg (Eds.), Proceedings of the BIVEC-GIBET Transport Research Days 2017 (pp. 179-195). University press.

Bouzenada, S. N. E., Fraikin, L., & Léonard, A. (2017). Experimental investigation on vapor pressure of desiccant for air conditioning application. Procedia Computer Science, 817-824. doi:10.1016/j.procs.2017.05.338

Bouzenada, S., Kaabi, A. N., Fraikin, L., & Léonard, A. (2017). Successive dehumidification/regeneration cycles by LiCL desiccant for air-conditioning system. Paper presented at 6th International Advances in Applied Physics and Materials Science Congress and Exhibition, APMAS 2016, Steigenberger Hotel MaslakIstanbul, Turkey. doi:10.1063/1.4975424

Grimm, A., Elustondo, D., Mäkelä, M., Segerström, M., Kalén, G., Fraikin, L., Léonard, A., & Larsson, S. H. (2017). Drying recycled fiber rejects in a bench-scale cyclone: Influence of device geometry and operational parameters on drying mechanisms. Fuel Processing Technology, 167, 631 - 640. doi:10.1016/j.fuproc.2017.08.004

Heusschen, R., Muller, J., Bolomsky, A., Schonfelder, K., Plougonven, E., Léonard, A., BEGUIN, Y., Cohen-Solal, M., Heinz, L., & CAERS, J. (2017). Maternal Embryonic Leucine Zipper Kinase (MELK) inhibition has direct effects on bone cells and prevents the development of osteolytic bone disease in multiple myeloma. Paper presented at 44th Annual European Calcified Tissue Society Congress.

Li, J., Plougonven, E., Fraikin, L., Salmon, T., Toye, D., Nistajakis, E., & Léonard, A. (2017). Influence of sawdust addition on drying of wastewater sludges: Comparison of structural characteristics. Drying Technology, 35 (8), 925-932. doi:10.1080/07373937.2016.1253020

Smet, S., Beckers, E., Léonard, A., & Degré, A. (2017). Effects of the soil pore network architecture on the soil’s physical functionnalities. Paper presented at EGU General Assembly 2017, Vienna, Austria.

Troch, F., Vanelslander, T., Sys, C., Laroche, F., Stevens, V., Verhoest, K., Merchan Arribas, A., Mostert, M., Tawfik, C. M. F., Belboom, S., Léonard, A., & Limbourg, S. (2017). A road map for explorative scenario creation on Belgian rail freight transport development. Competition and Regulation in Network Industries. doi:10.1177/1783591717734792

Léonard, A. (15 December 2016). Evolution des pratiques associées à la gestion des boues d'épuration dans le contexte d'une économie circulaire. Paper presented at Jeudis de l'Aquapôle, Liège, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (09 November 2016). Poster BRAIN-TRAINS: Integrating the LCA methodology in and interdisciplinary project. Poster session presented at 5th edition [avniR] conference. Life Cycle Thingking for leading managers, Lille, France.

Merchan Arribas, A., Belboom, S., & Léonard, A. (2016). BRAIN-TRAINS: Integrating the LCA methodology in and interdisciplinary project. In Proceedings of the 5th international conference on Life Cycle approaches.

Groslambert, S., Léonard, A., & Finet, S. (November 2016). Life cycle assessment of on-site accelerated food waste composter. Poster session presented at INTERNATIONAL [AVNIR] CONFERENCE 2016, Lille, France.

Gerbinet, S., Belboom, S., & Léonard, A. (27 October 2016). INFLUENCE OF THE DATASETS CHOICE ON LCA RESULTS: EXAMPLE OF GLUCOSE PRODUCTION. Paper presented at FNRS – LCA Contact Group Meeting, Bruxelles, Belgium.

Groslambert, S., & Léonard, A. (27 October 2016). LIFE CYCLE IN PRACTICE – FEEDBACK FROM A SME'S COACH. Paper presented at 2nd FNRS-LCA Contact Groupe Meeting, Bruxelles, Belgium.

Gerbinet, S., Briard, V., Pigeolet, J.-P., Hampson, C., & Léonard, A. (08 October 2016). PARTNERSHIP with a glass wool producer for accurate LCA. Paper presented at Congrès AVNIR, Lille, France.

Gerbinet, S., Belboom, S., & Léonard, A. (06 October 2016). Environmental impact of glucose: influence of the datasets choice on LCA results. Paper presented at Journée Jeunes Chercheurs GEPROC – UGéPE, Louvain, Belgium.

Léonard, A. (27 September 2016). Analyse de cycle de vie : impact du taux de recyclage des matières plastiques sur le bilan environnemental. Paper presented at Le recyclage des plastiques, un pas vers l’économie circulaire, Grâce-Hollogne, Belgium.

Gerbinet, S., Belboom, S., & Léonard, A. (22 September 2016). Glucose production: influence of the datasets choice on LCA results. Poster session presented at 22nd SETAC Europe LCA Case Study Symposium, Montpellier, France.

Léonard, G., Pfennig, A., Toye, D., Gommes, C., Lambert, S., Job, N., Léonard, A., Manfredini, T., & Dumont, M.-N. (05 September 2016). Integrated Project with Focus on Energy Transition and Circular Economy for Developing Engineering Students' Soft Skills. Poster session presented at 8th Conference on Engineering Education for Sustainable Development, Bruges, Belgium.

Belboom, S., & Léonard, A. (2016). Teaching of Life Cycle Assessment methodology to sensitize future engineers to sustainable development. In Proceedings of the 8th Conference on ‘Engineering Education for Sustainable Development’ (pp. 380-383).

Smet, S., Beckers, E., Léonard, A., & Degré, A. (07 July 2016). Quelle est l'influence du réseau poral du sol sur ses capacités de transfert ? Poster session presented at Les 13ème Journées d'Etude des Sols, Louvain-la-Neuve, Belgium.

Belboom, S., Lewis, G., Bareel, P.-F., & Léonard, A. (24 May 2016). How to improve the valorisationprocess of End-Of-Life vehicles? LCA as a tool to help decision. Paper presented at SETAC Europe 26th Annual Meeting, Nantes, France.

Groslambert, S., de Mahieu, J.-B., & Léonard, A. (24 May 2016). Life cycle assessment of hemp concret blocks. Poster session presented at SETAC Europe - 26th Annual Meeting, Nantes, France.

Groslambert, S., de Mahieu, J.-B., & Léonard, A. (24 May 2016). Life cycle assessment of hemp concret blocks. Paper presented at SETAC Europe - 26th Annual Meeting, Nantes, France.

Plougonven, E., Hubert, J., Collin, F., & Léonard, A. (11 May 2016). Accurate measurement of radius evolution as a function of direction in 3D images. Poster session presented at Bruker microCT user meeting, Mondorf, Luxembourg.

Belboom, S., & Léonard, A. (09 May 2016). How to specify the environmental footprint of electricity? A methodological approach. Paper presented at SAM 10, Roma, Italy.

Groslambert, S., Ernst, V., & Léonard, A. (09 May 2016). Life cycle assessment of sound insulation solution made from waste paper. Poster session presented at SAM10, Roma, Italy.

Hubert, J., Plougonven, E., Léonard, A., & Collin, F. (May 2016). Boom clay drying behavior: experimental and numerical study. Paper presented at 34èmes Rencontres Universitaires de Génie Civil de l'AUGC, Liège, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (May 2016). Rail freight intermodality in Belgium: energy related emissions. Poster session presented at SETAC Europe 26th Annual Meeting, Nantes, France.

Groslambert, S., & Léonard, A. (21 April 2016). Analyse du cycle anthropique de l’eau produite, distribuée et traitée en Région wallonne. Paper presented at L’économie circulaire de l’Eau, Liège, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (2016). Environmental Impact Assessment of Rail Freight Intermodality. In J. Pombo, The Third International Conference on Railway Technology: Research, Development and Maintenance (pp. 296). Stirlingshire, United Kingdom: Civil-Comp Press. doi:10.4203/ccp.110.296

Prime, N., Levasseur, S., Miny, L., Charlier, R., Léonard, A., & Collin, F. (March 2016). Drying induced shrinkage of Boom Clay: an experimental investigation. Canadian Geotechnical Journal, 53 (3), 396-409. doi:10.1139/cgj-2015-0099

Hubert, J., Prime, N., Plougonven, E., Léonard, A., & Collin, F. (16 February 2016). Desiccation cracks formation in clay-barrier for nuclear waste disposal. Paper presented at Geotechnical & Structures Engineering Congress, Phoenix, United States.

Belboom, S., & Léonard, A. (February 2016). Does biobased polymer achieve better environmental impacts than fossil polymer? Comparison of fossil HDPE and biobased HDPE produced from sugar beet and wheat. Biomass and Bioenergy, 85, 159-167. doi:10.1016/j.biombioe.2015.12.014

Léonard, A. (February 2016). Challenges in drying wastewater sludge. NPT Procestechnologie: Officieel Orgaan van de Nederlandse Procestechnologen, 2016-01, 22-23.

Belboom, S., Lewis, G., Bareel, P.-F., & Léonard, A. (2016). Life cycle assessment of hybrid vehicles recycling: Comparison of three business lines of dismantling. Waste Management, 50, 184–193. doi:10.1016/j.wasman.2016.02.007

Benhebal, H., Chaib, M., Crine, M., Léonard, A., & Lambert, S. (2016). Photocatalytic decolorization of Gentian Violet with Na-doped (SnO2 and ZnO). Chiang Mai Journal of Science, 42, 1-9.

Bennamoun, L., Fraikin, L., Li, J., & Léonard, A. (2016). Forced Convective Drying of Wastewater Sludge with Presentation of Exergy Analysis of the Dryer. Chemical Engineering Communications, 203, 855–860. doi:10.1080/00986445.2015.1114475

Bouzenada, S., Kaabi, A. N., Fraikin, L., Salmon, T., & Léonard, A. (2016). Experimental Comparative Study on Lithium Chloride and Calcium Chloride Desiccants. Procedia Computer Science, 83 (718-725). doi:10.1016/j.procs.2016.04.159

Heusschen, R.* , Muller, J.* , Binsfeld, M., Marty, C., Plougonven, E., DUBOIS, S., Mahli, N., Moermans, K., Carmeliet, G., Léonard, A., BARON, F., BEGUIN, Y., Menu, E., Cohen-Solal, M., & CAERS, J. (2016). SRC Kinase Inhibition with Saracatinib Limits the Development of Osteolytic Bone Disease in Multiple Myeloma. Oncotarget, 7, 30712-30729. doi:10.18632/oncotarget.8750
* These authors have contributed equally to this work.

Heusschen, R., Muller, J., Binsfeld, M., Marty, C., Plougonven, E., DUBOIS, S., Mahli, N., Moermans, K., Carmeliet, G., Léonard, A., BARON, F., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2016). SRC kinase inhibition with saracatinib limits the development of osteolytic bone disease in multiple myeloma. Belgian Journal of Hematology.

Heusschen, R., Muller, J., Binsfeld, M., Marty, C., Plougonven, E., DUBOIS, S., Mahli, N., Moermans, K., Carmeliet, G., Léonard, A., BARON, F., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2016). SRC kinase inhibition with saracatinib limits the development of osteolytic bone disease in multiple myeloma. Paper presented at 31st General Annual Meeting of the Belgian Hematological Society, Brussels, Belgium.

Heusschen, R., Muller, J., Binsfeld, M., Plougonven, E., Mahli, N., Carmeliet, G., Léonard, A., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2016). The Src Inhibitor AZD0530 Prevents the Development of Osteolytic Bone Disease in Multiple Myeloma. Poster session presented at 43rd Annual European Calcified Tissue Society Congress, Rome, Italy.

Heusschen, R., Muller, J., Binsfeld, M., Plougonven, E., Mahli, N., Carmeliet, G., Léonard, A., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2016). SRC Kinase Inhibition with Saracatinib Limits the Development of Osteolytic Bone Disease in Multiple Myeloma. Poster session presented at GIGA day 2016, Liège, Belgium.

Khama, R., Aissani, F., Alkama, R., Bennamoun, L., Fraikin, L., Salmon, T., Plougonven, E., & Léonard, A. (2016). Convective drying of cherry tomato: Study of skin effect. Journal of Engineering Science and Technology, 11 (3), 443-457.

Li, J., Fraikin, L., Salmon, T., Plougonven, E., Toye, D., & Leonard, A. (2016). Convective drying behavior of sawdust-sludge mixtures in a fixed bed. Drying Technology, 34 (4), 395-402. doi:10.1080/07373937.2015.1076835

Li, J., Plougonven, E., Fraikin, L., Salmon, T., Toye, D., Nistajakis, E., & Léonard, A. (2016). Positive Operations on Wastewater Sludge Drying: Comparison of Back-Mixing and Sawdust Addition. Energy and Fuels, 30 (4), 3014-3019. doi:10.1021/acs.energyfuels.5b02960

Mäkelä, M., Fraikin, L., Léonard, A., Benavente, V., & Fullana, A. (2016). Predicting the drying properties of sludge based on hydrothermal treatment under subcritical conditions. Water Research, 91, 11-18. doi:10.1016/j.watres.2015.12.043

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (2016). Sludge dewatering and drying: about the difficulty of making experiments with a non-stabilized material. Desalination and Water Treatment, 57 (30), 13841-13856. doi:10.1080/19443994.2015.1060534

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (2016). Enhanced sludge dewatering and drying comparison of two linear polyelectrolytes co-conditioning with polyaluminum chloride. Desalination and Water Treatment, 57, 27989–28006. doi:10.1080/19443994.2016.1178602

Troch, F., Vanelslander, T., Sys, C., Stevens, V., Verhoest, K., Mostert, M., Tawfik, C. M. F., Limbourg, S., Merchan Arribas, A., Belboom, S., & Léonard, A. (2016). Transversal assessment of new intermodal strategies : D 2.1 –6.1 Methodology proposal. Belspo.

Troch, F., Vanelslander, T., Sys, C., Tawfik, C., Mostert, M., Limbourg, S., Merchan, A., Belboom, S., Léonard, A., Stevens, V., & Verhoest, K. (2016). BRAIN-TRAINS : macro-economic impact of rail freight in Belgium : what can be the future added value? In Proceedings.

Belboom, S., Szöcs, C., & Léonard, A. (December 2015). Environmental impacts of phosphoric acid production using di-hemihydrate process: a Belgian case study. Journal of Cleaner Production, 108, 978-986. doi:10.1016/j.jclepro.2015.06.141

Wan, F., Tran, M. P., Leblanc, C., Béchet, E., Plougonven, E., Léonard, A., Detrembleur, C., Noels, L., Thomassin, J.-M., & Nguyen, V. D. (December 2015). Experimental and computational micro–mechanical investigations of compressive properties of polypropylene/multi–walled carbon nanotubes nanocomposite foams. Mechanics of Materials, 91 (Part 1), 95-118. doi:10.1016/j.mechmat.2015.07.004

Léonard, A. (30 November 2015). Towards understanding and design of sludge dryers. Paper presented at Annual Symposium of the Nederlandse Werkgroep Drogen (NWGD), Wageningen, Netherlands.

Groslambert, S., & Léonard, A. (19 November 2015). LIFE CYCLE ASSESSMENT OF ANTHROPIC WATER. Poster session presented at FNRS First LCA contact group meeting, Liège, Belgium.

Kahlerras, L., Belhamri, A., Fraikin, L., & Léonard, A. (2015). ETUDE DE LA MICROSTRUCTURE DU MORTIER DE CIMENT A TRAVERS LES COURBES DE SORPTION. In L. kahlerras, Proceedings du séminaire International sur le Génie Climatique et l’Energétique, SIGCLE’2015 (pp. 224-229).

Belboom, S., Renzoni, R., Tourneur, F., & Léonard, A. (22 October 2015). L’empreinte environnementale des pierres ornementales? Pour qui, pourquoi, comment? Paper presented at SIM 2015 - Exposition du congrès de la Société de l'industrie minérale, Mons, Belgium.

Benhebal, H., Benrabah, B., Léonard, A., & Lambert, S. (16 October 2015). Effet du taux de dopage sur l'activité photocatalytique de ZnO dopé par les métaux alcalins. Paper presented at Procédés Avancés pour l'Environnement, l'Energie et la Santé, Québec, Canada.

Gerbinet, S., Belboom, S., Briard, V., Hampson, C., & Léonard, A. (15 October 2015). Environmental impact assessment of bio-based binders: from production to industrial applications. Poster session presented at Journée des jeunes chercheurs, Saint-Quentin, France.

Debouche, C., Veriter, S., Plougonven, E., Dufrane, D., Aouassar, N., & Léonard, A. (September 2015). Selection Of A Human Bone As A Scaffold For Islet Encapsulation In A 3-dimensional Device (poster). Poster session presented at 17th Congress of the European Society for Organ Transplantation - ESOT 2015, Brussels, Belgium.

Troch, F., Vanelslander, T., Belboom, S., Léonard, A., Limbourg, S., Merchan Arribas, A., Mostert, M., Tawfik, C. M. F., Stevens, V., Sys, C., & Verhoest, K. (September 2015). Brain trains: scenario development to explore intermodal rail transport expansion in, from and towards Belgium. Paper presented at European Transport Conference 2015, Frankfurt, Germany.

Fraikin, L., Salmon, T., Herbreteau, B., Nicol, F., Crine, M., & Léonard, A. (18 August 2015). USING OF AN EXPERIMENTAL DESIGN TO CHARACTERIZE THE CONVECTIVE DRYING BEHAVIOR OF DIFFERENT SLUDGES. Drying Technology, 33 (11), 1302-1308. doi:10.1080/07373937.2015.1026979

Troch, F., Vanelslander, T., Sys, C., Belboom, S., Léonard, A., Limbourg, S., Merchan Arribas, A., Mostert, M., Stevens, V., Tawfik, C. M. F., & Verhoest, K. (2015). Brain Trains: Intermodal Rail Freight Transport and Hinterland Connections - A Swot Analysis to Assess the Belgian Rail Practice. In Proceedings of the IAME Annual Conference 2015.

Smet, S., Léonard, A., & Degré, A. (21 July 2015). How And Where Is The Link Between The Soil Behaviour And Its Internal Architecture? Paper presented at How to unravel the interactions between soil structure and soil functions ?, Grenoble, France.

Plougonven, E., & Léonard, A. (09 July 2015). Algorithmic aspects of converting surface mesh data to volumetric images. Paper presented at 14th International Congress for Stereology and Image Analysis, Liege, Belgium.

Li, J., Plougonven, E., Fraikin, L., Salmon, T., Toye, D., Nistajakis, E., & Léonard, A. (27 June 2015). Multiscale structure characterization of sawdust-waste water sludge extrudates dried in a pilot-scale fixed bed. Biomass and Bioenergy, 81 (0), 98 - 107. doi:10.1016/j.biombioe.2015.06.009

Groslambert, S., & Léonard, A. (28 May 2015). Life cycle assessment of biobased chemical building blocks made from European waste streams. Poster session presented at ReNEW your approach to resources in the circular economy: Let's collaborate and innovate! (ReNEW brokerage event), Bruxelles, Belgium.

Merchan Arribas, A., Belboom, S., & Léonard, A. (04 May 2015). Poster Environmental impact assessment of rail freight intermodality. Poster session presented at SETAC Europe 25th Annual Meeting, Barcelona, Spain.

Groslambert, S., & Léonard, A. (May 2015). Life cycle assessment of biobased chemical building blocks made from European waste streams. Poster session presented at Métamorphoses : la vitrine belge des matériaux innovants, Liège, Belgium.

Groslambert, S., & Léonard, A. (May 2015). Life cycle assessment of biobased chemical building blocks made from European waste streams. Poster session presented at SETAC Europe - 25th Annual Meeting, Barcelona, Spain.

Groslambert, S., & Léonard, A. (May 2015). LIFE CYCLE ASSESSMENT OF ANTHROPIC WATER. Poster session presented at SAM9, Luxembourg, Luxembourg.

Merchan Arribas, A., Belboom, S., & Léonard, A. (2015). Environmental impact assessment of rail freight intermodality. In S. Rasouli & H. Timmermans (Eds.), Current issues in transportation research - Proceedings of the BIVEC/GIBET transport research days 2015 (pp. 77 - 85).

Troch, F., Vanelslander, T., Belboom, S., Léonard, A., Limbourg, S., Merchan Arribas, A., Mostert, M., Pauwels, T., Vidar, S., Sys, C., Tawfik, C. M. F., & Verhoest, K. (May 2015). BRAIN TRAINS: Intermodal rail freight transport and hinterland connections A SWOT analysis to assess the Belgian rail practice. Paper presented at BIVEC/GIBET Transport Research Day 2015, EINDHOVEN, Netherlands.

Belboom, S., Bodson, B., & Léonard, A. (March 2015). Does the production of Belgian bioethanol fit with European requirements on GHG emissions? Case of wheat. Biomass and Bioenergy, 74, 58-65. doi:10.1016/j.biombioe.2015.01.005

Bennamoun, L., Afzal, M. T., & Léonard, A. (2015). Drying of alga as a source of bioenergy feedstock and food supplement - A review. Renewable and Sustainable Energy Reviews, 50, 1203-1212. doi:10.1016/j.rser.2015.04.196

Bennamoun, L., Khama, R., & Léonard, A. (2015). Convective drying of a single cherry tomato: Modeling and experimental study. Food and Bioproducts Processing, 94, 114-123. doi:10.1016/j.fbp.2015.02.006

Fraikin, L., Salmon, T., & Léonard, A. (2015). Design of a convective labscale dryer working either with superheated steam or air. In Proceedings of the 5th European Drying Conference (EuroDrying'2015).

Haghgoo, M., Yousefi, A. A., Mehr, M. J. Z., Léonard, A., Philippe, M., Compère, P., Léonard, A., & Job, N. (2015). Correlation between morphology and electrical conductivity of dried and carbonized multi-walled carbon nanotube/resorcinol–formaldehyde xerogel composites. Journal of Materials Science, 20, 6007-6020. doi:10.1007/s10853-015-9148-0

Heusschen, R., Muller, J., Binsfeld, M., Plougonven, E., Mahli, N., Carmeliet, G., Léonard, A., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2015). The SRC inhibitor AZD0530 prevents the development of osteolytic bone disease in multiple myeloma. Blood.

Heusschen, R., Muller, J., Binsfeld, M., Plougonven, E., Mahli, N., Carmeliet, G., Léonard, A., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2015). The SRC inhibitor AZD0530 prevents the development of osteolytic bone disease in multiple myeloma. Blood, 126 (23), 3018.

Heusschen, R., Muller, J., Binsfeld, M., Plougonven, E., Mahli, N., Carmeliet, G., Léonard, A., Cohen-Solal, M., Vanderkerken, K., BEGUIN, Y., Menu, E., & CAERS, J. (2015). The SRC inhibitor AZD0530 prevents the development of osteolytic bone disease in multiple myeloma. Poster session presented at 57th ASH Annual Meeting and Exposition, Orlando, United States - Florida.

Kahlerras, L., Courard, L., Michel, F., Fraikin, L., Belhamri, A., & Léonard, A. (2015). Study of water diffusivity during drying of mortar. In Proceedings of the 5th European Drying Conference (EuroDrying'2015).

Kerckhofs, G., Sap, A., Plougonven, E., van Gastel, N., Durand, M., Vangoitsenhoven, R., van der Schueren, B., Léonard, A., Vandamme, K., Carmeliet, G., Vogt, T., Luyten, F., & Geris, L. (2015). Novel contrast agents for contrast-enhanced CT to visualize in 3D the blood vessel network and fat cell distribution in bone marrow. Paper presented at 3rd Belgian Symposium on Tissue Engineering, Leuven, Belgium.

Li, J., Fraikin, L., Salmon, T., Bennamoun, L., Toye, D., Schreinemachers, R., & Léonard, A. (2015). Investigation on Convective Drying of Mixtures of Sewage Sludge and Sawdust in a Fixed Bed. Drying Technology, 33 (6), 704-712. doi:10.1080/07373937.2014.982254

Li, J., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (2015). Positive operations on convective drying of sewage sludge: comparison of back mixing and sawdust addition. In Proceedings of the 5th European Drying Conference (EuroDrying'2015).

Li, J., Plougonven, E., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (2015). Image analysis of X-ray tomograms of sludge during convective drying in a pilot-scale fixed bed. Chemical Engineering Science, 134, 222-229. doi:10.1016/j.ces.2015.05.010

Li, J., Plougonven, E., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (2015). Effect of sawdust addition on convective drying of sludges: comparison of the structural characteristics. In Proceedings of the 5th European Drying Conference (EuroDrying'2015).

Prime, N., Fraikin, L., Léonard, A., Charlier, R., & Levasseur, S. (2015). Experimental Investigation of Hydromechanical Coupling During Clay Drying. Drying Technology, 33 (15-16), 1821-1829. doi:10.1080/07373937.2015.1030030

Prime, N., Housni, Z., Fraikin, L., Léonard, A., Charlier, R., & Levasseur, S. (2015). On Water Transfer and Hydraulic Connection Layer During the Convective Drying of Rigid Porous Material. Transport in Porous Media, 106 (1), 47-72. doi:10.1007/s11242-014-0390-8

Smet, S., Léonard, A., & Degré, A. (2015). How to choose the right threshold(s) : First results. Analysis of different segmentation methods on grayscale synthetic images. Poster session presented at How to unravel the interactions between soil structure and soil functions ?, Grenoble, France.

Troch, F., Vanelslander, T., Sys, C., Stevens, V., Verhoest, K., Mostert, M., Tawfik, C. M. F., Limbourg, S., Merchan Arribas, A., Belboom, S., & Léonard, A. (2015). BRAIN-TRAINS : transversal assessment of new intermodal strategies : deliverable D1.3 : scenario development. Belspo.

Vanelslander, T., Troch, F., Dotsenko, V., Pauwels, T., Sys, C., Tawfik, C., Mostert, M., Limbourg, S., Stevens, V., Verhoest, K., Merchan Arribas, A., Belboom, S., & Léonard, A. (2015). BRAIN-TRAINS : transversal assessment of new intermodal strategies: deliverable D1.1-1.2, SWOT analysis. Belspo.

Gerbinet, S., Belboom, S., & Léonard, A. (17 November 2014). Life Cycle Analysis for optimization of biomethanation processes including digestate valorization. Paper presented at INNOVATIVE SOLID WASTE VALORIZATION : technical, economic and environmental aspects, Liège, Belgium.

Groslambert, S., Belboom, S., Lewis, G., & Léonard, A. (17 November 2014). Environmental relevance of end of life vehicle valorisation - LCA of COMET case study. Paper presented at INNOVATIVE SOLID WASTE VALORIZATION : technical, economic and environmental aspects, Liège, Belgium.

de Bien, C., Mengoni, M., Wilcox, R., Léonard, A., & Toye, D. (23 October 2014). Elaboration, characterization and modeling of mechanical behavior of porous scaffolds for tissue engineering. Poster session presented at GEPROC-UGéPE 2014, « Journée des Jeunes Chercheurs », Mons, Belgium.

de Bien, C., Sevrin, C., DEWAEL, T., Grandfils, C., Léonard, A., & Toye, D. (23 October 2014). BIOMATERIALS for MEDICAL APPLICATION - Interactions between materials and living systems. Poster session presented at IntermatGR 2014, Arlon, Belgium.

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (23 October 2014). Enhanced sludge dewatering and drying comparison of two linear polyelectrolytes co-conditioning with Polyaluminium chloride. Poster session presented at Journee des Jeunes Chercheurs GEPROC-UGEPE, Mons, Belgium.

Fraikin, L., Herbreteau, B., Salmon, T., Nicol, F., Crine, M., & Léonard, A. (27 August 2014). INFLUENCE OF SLUDGE TREATEMENT ON ITS CONVECTIVE DRYING BEHAVIOR. Paper presented at 19th International Drying Symposium (IDS 2014), Lyon, France.

Li, J., Fraikin, L., Salmon, T., Toye, D., & Léonard, A. (26 August 2014). Convective drying of sawdust/sludge mixtures in a fixed bed: The effect of sludge origin. Paper presented at 19th International Drying Symposium, Lyon, France.

Kahlerras, L., Belhamri, A., Fraikin, L., Courard, L., & Léonard, A. (24 August 2014). modelling heat and mass transfer during convective drying of a building material. Poster session presented at IDS 2014 19th International Drying Symposium, Lyon, France. doi:10.1051/ids2014/2013351

Kahlerras, L., Michel, F., Courard, L., Fraikin, L., Salmon, T., Bennamoun, L., Belhamri, A., & Léonard, A. (24 August 2014). Experimental study of the drying kinetic of mortar. Poster session presented at IDS 2014 19th International Drying Symposium, Lyon, France. doi:10.1051/ids2014/2013352

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (August 2014). IMPACT OF A HIGH LINEAR WEIGHT POLYMER CO-CONDITIONING WITH POLYALUMINIUM CHLORIDE ON DEWATERING AND CONVECTIVE DRYING OF URBAN RESIDUAL SLUDGE. Poster session presented at 19th International drying Symposium, Lyon, France.

Gerbinet, S., Briard, V., & Léonard, A. (24 July 2014). Modeling of a glass mineral wool process in view of Life Cycle Analysis. Matériaux et Techniques, 102 (502). doi:10.1051/mattech/2014019

Li, J., Fraikin, L., Salmon, T., Plougonven, E., Toye, D., & Léonard, A. (27 May 2014). Convective drying behavior of sawdust/sludge mixtures in a fixed bed. Paper presented at Fourth European Conference on Sludge Management.

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (26 May 2014). Enhanced sludge dewatering and drying comparison of two linear polyelectrolytes co-conditioning with Polyaluminium chloride. Poster session presented at European Conference on sludge Management, Léon, Turkey.

Gerbinet, S., Léonard, A., & Briard, V. (20 May 2014). Modeling of a glass mineral wool process in view of Life Cycle Analysis. Paper presented at 8th International Conference on Society & Materials, SAM8, Liège, Belgium.

Gerbinet, S., Léonard, A., & Briard, V. (12 May 2014). Modeling of a glass mineral wool process in view of Life Cycle Analysis. Poster session presented at SETAC Europe ; 24 th Annual Meeting, Basel, Switzerland.

Beckers, E., Plougonven, E., Gigot, N., Léonard, A., Roisin, C., Brostaux, Y., & Degré, A. (May 2014). Coupling X-ray microtomography and macroscopic soil measurements: a method to enhance near saturation functions? Hydrology and Earth System Sciences, 18, 1805-1817. doi:10.5194/hess-18-1805-2014

Beckers, E., Plougonven, E., Roisin, C., Hapca, S., Léonard, A., & Degré, A. (May 2014). X-ray microtomography: A porosity-based thresholding method to improve soil pore network characterization? Geoderma, 219-220, 145-154. doi:10.1016/j.geoderma.2014.01.004

Belboom, S., Ali, S., Heyen, G., & Léonard, A. (May 2014). Chemical storage for electricity surplus – a complementary possibility of physical storage? Poster session presented at SETAC Europe 24th Annual Meeting – Science across bridges, borders and boundaries, Basel, Switzerland.

Groslambert, S., & Léonard, A. (May 2014). Determination of the environmental footprint of the anthropic water cycle using LCA. Poster session presented at SETAC Europe - 24th Annual Meeting, Basel, Switzerland.

Li, J., Bennamoun, L., Fraikin, L., Salmon, T., Toye, D., Schreinemachers, R., & Léonard, A. (May 2014). Analysis of the Shrinkage Effect on Mass Transfer During Convective Drying of Sawdust/Sludge Mixtures. Drying Technology, 32, 1706-1717. doi:10.1080/07373937.2014.924136

Benhebal, H., Chaid, M., Léonard, A., Crine, M., & Lambert, S. (17 April 2014). Preparation of polyaniline-modified local clay and study of its sorption capacity. Journal of Nanostructure in Chemistry, 4 (98), 6. doi:10.1007/s40097-014-0098-x

Plougonven, E., Toye, D., & Léonard, A. (03 April 2014). Accurate 3D microstructure characterisation of porous materials by X-ray microtomography:  a need for advanced and specialised image processing tools. Paper presented at Microstructural Characterization and Quality Assurance Workshop.

Belboom, S., & Léonard, A. (2014). Importance of LUC and ILUC on the carbon footprint of bioproduct: case of bio-HDPE. Matériaux et Techniques, 102 (2). doi:10.1051/mattech/2014006

Benhebal, H., Chaib, M., Malengreaux, C., Lambert, S., Léonard, A., Crine, M., & Heinrichs, B. (2014). Visible-light photo-activity of alkali metal doped ZnO. Journal of the Taiwan Institute of Chemical Engineers, 45 (1), 249-253. doi:10.1016/j.jtice.2013.04.003

Bennamoun, L., Fraikin, L., & Léonard, A. (2014). Modeling and Simulation of Heat and Mass Transfer During Convective Drying of Wastewater Sludge with Introduction of Shrinkage Phenomena. Drying Technology, 32 (1), 13-22. doi:10.1080/07373937.2013.807281

Bouzenada, S., Kaabi, A. N., Fraikin, L., & Léonard, A. (2014). Experimental study on dehumidification/regeneration of liquid desiccant: LiBr solution. Procedia Computer Science, 32, 673-680. doi:10.1016/j.procs.2014.05.476

de Bien, C., Ounally, T., Collard, V., Jérôme, C., Léonard, A., & Toye, D. (2014). “Product-oriented engineering” applied to the development of porous scaffolds for tissue engineering. World Congress in Industrial Process Tomography.

Gerbinet, S., Belboom, S., & Léonard, A. (2014). Life Cycle Analysis (LCA) of photovoltaic panels: A review. Renewable and Sustainable Energy Reviews, 38, 747 - 753. doi:10.1016/j.rser.2014.07.043

Groslambert, S., Belboom, S., & Léonard, A. (2014). Analyse du cycle de l'eau produite, distribuée et épurée en Wallonie - Analyse du cycle de l'eau de pluie. Jambes, Belgium: Direction Générale de l'Agriculture, des Ressources Naturelles et de l'Environnement (DGARNE) du Service Public de Wallonie (SPW).

Haghgoo, M., Yousefi, A. A., Zohouriaan Mehr, M. J., Celzard, A., Fierro, V., Léonard, A., Léonard, A., & Job, N. (2014). Erratum: Characterization of multi-walled carbon nanotube dispersion in resorcinol-formaldehyde aerogels (Microporous and Mesoporous Materials (2014) 184 (97-104)). Microporous and Mesoporous Materials, 195, 1. doi:10.1016/j.micromeso.2014.04.001

Haghgoo, M., Yousefi, A. A., Zohouriaan Mehr, M. J., Fierro, V., Celzard, A., Léonard, A., Léonard, A., & Job, N. (2014). Characterization of multi-walled carbon nanotube dispersion in resorcinol-formaldehyde aerogel. Microporous and Mesoporous Materials, 184, 97-104. doi:10.1016/j.micromeso.2013.10.002

Kerckhofs, G., Plougonven, E., Maréchal, M., Bosmans, K., Léonard, A., Schrooten, J., Luyten, F., & Geris, L. (2014). Virtual 3D quantitative histology of skeletal tissues using contrast-enhanced nanofocus X-ray computed tomography. Paper presented at 3rd International Symposium in Applied Bioimaging, Porto, Portugal.

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2014). X-ray microtomography: A new tool to follow soft material shrinkage during convective drying. In 2nd World Congress on Industrial Process Tomography : Hannover, Germany 29-31 août 2001 (pp. 110-117). International Society for Industrial Process Tomography.

Parmentier, N., Plougonven, E., Léonard, A., & Jeanmart, H. (2014). Characterization of dry and wet sawdust porous beds. Powder Technology, 264, 140-148. doi:10.1016/j.powtec.2014.05.006

Prime, N., Housni, Z., Fraikin, L., Léonard, A., Charlier, R., Collin, F., & Levasseur, S. (2014). Experimental arguments concerning a hydraulic connection layer during limestone convective drying. In Proceedings of the 6th International Conference on Unsaturated Soils, UNSAT 2014 (pp. 1467-1474). doi:10.1201/b17034-214

Bennamoun, L., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (11 December 2013). Modeling of Wastewater Sludge Drying with Determination of Diffusivity Moisture. Journal of Residuals Science and Technology, 10 (4), 165.

de Bien, C., Ounally, T., Collard, V., Jérôme, C., Léonard, A., & Toye, D. (15 November 2013). « Product-oriented engineering » applied to the development of porous scaffolds for tissue engineering. Poster session presented at Journée Scientifique GEPROC 2013 - PROCÉDÉS et MATÉRIAUX DURABLES, Liège, Belgium.

Gerbinet, S., Renzoni, R., Briard, V., & Léonard, A. (15 November 2013). Use of Life Cycle Assessment to support in the Eco-Design of a glass-wool process. Poster session presented at GEPROC: Journée Scientifique: procédés et matériaux durables, Liège, Belgium.

Pambou, Y.-B., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (15 November 2013). Impact of sludge storage duration on its dewatering and drying ability. Poster session presented at Journee Scientifique GEPROC2013-Procédés et Matériaux Durables, Liege, Belgium.

Gerbinet, S., & Léonard, A. (13 November 2013). Use of Life Cycle Assessment to determine the environmental impact of gasification of lignocellulosic biomass: preliminary results. Poster session presented at SETAC Europe 19th LCA Case Study Symposium, Rome, Italy.

Belboom, S., Bodson, B., & Léonard, A. (November 2013). Does Belgian bioethanol comply with European Renewable Energy Directive ? Poster session presented at 19th SETAC Europe LCA Case Studies Symposium, Roma, Italy.

Belboom, S., Szöcs, C., & Léonard, A. (November 2013). Environmental Product Declaration of purified and defluorinated phosphoric acid – difficulties and limitations of the methodology. Poster session presented at 19th SETAC Europe LCA Case Studies Symposium, Roma, Italy.

de Bien, C., Ounally, T., Collard, V., Jérôme, C., Léonard, A., & Toye, D. (2013). Le « génie orienté produit » appliqué à l’élaboration de matrices poreuses pour l’ingénierie tissulaire. In Récents Progrès en Génie des Procédés. Paris, France: Ed. SFGP.

Li, J., Fraikin, L., Salmon, T., Bennamoun, L., Toye, D., & Léonard, A. (04 October 2013). Convective Drying of Mixtures of Sewage Sludge and Sawdust in a Fixed Bed. Paper presented at 4th European Drying Conference, Paris, France.

Khama, R., Aissani, F., Alkama, R., Bennamoun, L., Fraikin, L., Salmon, T., Plougonven, E., & Léonard, A. (03 October 2013). Convective drying of cherry tomato: Study of skin effect. Poster session presented at EuroDrying 2013, Paris, France.

Bennamoun, L., & Léonard, A. (October 2013). Behavioural study of  chemical  products during vacuum agitated contact drying. Poster session presented at EuroDrying'2013, Paris, France.

Pambou, Y.-B., Salmon, T., Fraikin, L., Crine, M., & Léonard, A. (October 2013). Impact of sludge storage duration on its dewatering and drying ability. Poster session presented at EuroDrying'2013, Paris, France.

Bennamoun, L., Afzal, M., & Léonard, A. (27 September 2013). Baker's yeast behavior during vacuum agitated contact drying. Chemical Engineering and Technology, 36 (10), 1795-1800. doi:10.1002/ceat.201300253

Prime, N., Housni, Z., Fraikin, L., Léonard, A., Charlier, R., & Levasseur, S. (10 September 2013). Different phases of water transfer during rock drying. Paper presented at First International Workshop on the FE Code LAGAMINE, Liège, Belgium.

de Bien, C., Ounally, T., Collard, V., Jérôme, C., Léonard, A., & Toye, D. (2013). "Product-oriented engineering" applied to the development of porous scaffolds for tissue engineering. Procedia Engineering.

Prime, N., Housni, Z., Fraikin, L., Léonard, A., Charlier, R., & Levasseur, S. (August 2013). Heat and mass transfer coefficient analysis during rock convective drying. Paper presented at Eurodrying'2013, Paris, France.

Belboom, S., & Léonard, A. (15 May 2013). What is the right pathway to be sustainable? Case of biofuels and bioproducts in Europe. Paper presented at 23rd SETAC Europe Annual Meeting, Glasgow, United Kingdom.

Belboom, S., & Léonard, A. (May 2013). Environmental footprint of HDPE: comparison between biobased and fossil products. Poster session presented at "From biobased polymers to bioplastics", Brussels, Belgium.

Bennamoun, L., Crine, M., & Léonard, A. (28 April 2013). Convective drying of wastewater sludge: Introduction of shrinkage effect in mathematical modeling. Drying Technology, 31 (6), 643-654. doi:10.1080/07373937.2012.752743

Gerbinet, S., Renzoni, R., Briard, V., Desert, J.-M., & Léonard, A. (25 April 2013). Use of Life Cycle Assessment in view of Eco-Design for a glass wool process. Paper presented at Society and Materials 7th International conference SAM-7, Aachen, Germany.

Gerbinet, S., Jeanmart, H., & Léonard, A. (22 April 2013). Use of Life Cycle Assessment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: The gasification step. Poster session presented at 9th European Congress of Chemical Engineering, Shaping a Sustainable Future, The Hague, Netherlands.

Gerbinet, S., & Léonard, A. (2013). Land use change: An essential aspect of Life Cycle Analysis of lignocellulosic biomass conversion processes. Paper presented at Biorefinery for food & fuel & chemicals, Wageningen, Netherlands.

Gerbinet, S., Briard, V., & Léonard, A. (22 March 2013). ACV et Ecoconception: illustration de la démarche au sein de Knauf Insulation. Paper presented at Regards croisés sur l'intérêt et les apports de la démarche ACV dans le domaine de la construction, Liège, Belgium.

Léonard, A. (22 March 2013). L’Analyse du Cycle de vie : quoi, pourquoi, comment ? Paper presented at Regards croisés sur l'intérêt et les apports de la démarche ACV dans le domaine de la construction, Liège, Belgium.

Belboom, S., Digneffe, J.-M., Renzoni, R., Germain, A., & Léonard, A. (2013). Comparing technologies for municipal solid waste management using life cycle assessment methodology: a Belgian case study. International Journal of Life Cycle Assessment, 18 (8), 1513-1523. doi:10.1007/s11367-013-0603-3

Belboom, S., & Léonard, A. (2013). Importance of LUC and ILUC on the carbon footprint of bioproduct:case of bio-HDPE. International seminar on society and materials.

Benhebal, H., Chaib, M., Léonard, A., Tasseroul, L., Paéz, C. A., Salmon, T., Poelman, D., Crine, M., Heinrichs, B., Pirard, J.-P., & Lambert, S. (2013). Sol-gel preparation and characterisation of SnO<inf>2</inf>powders employed as catalyst for phenol photodegradation. Scientia Iranica, 20 (6), 1891-1898.

Benhebal, H., Chaib, M., Léonard, A., Tasseroul, L., Pàez Martinez, C., Salmon, T., Poelman, D., Crine, M., Heinrichs, B., Pirard, J.-P., & Lambert, S. (2013). Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation. Scientia Iranica, 20 (6), 1891-1898.

Benhebal, H., Chaib, M., Salmon, T., Geens, J., Léonard, A., Lambert, S., Crine, M., & Heinrichs, B. (2013). Photocatalytic degradation of phenol and benzoic acid using zinc oxide powders prepared by the sol-gel process. Alexandria Engineering Journal, 52 (3), 517-523. doi:10.1016/j.aej.2013.04.005

Bennamoun, L., Arlabosse, P., & Léonard, A. (2013). Review on fundamental aspect of application of drying process to wastewater sludge. Renewable and Sustainable Energy Reviews, 28, 29-43. doi:10.1016/j.rser.2013.07.043

Bennamoun, L., Kahlerras, L., Michel, F., Courard, L., Salmon, T., Fraikin, L., Belhamri, A., & Léonard, A. (2013). Determination of Moisture Diffusivity During Drying of Mortar Cement: Experimental and Modeling Study. International Journal of Energy Engineering, 3 (1), 1-6.

LAMBERT, F., LECLOUX, G., Léonard, A., Sourice, S., Layrolle, P., & ROMPEN, E. (2013). Bone Regeneration Using Porous Titanium Particles versus Bovine Hydroxyapatite: A Sinus Lift Study in Rabbits. Clinical Implant Dentistry and Related Research, 15 (3). doi:10.1111/j.1708-8208.2011.00374.x

LAMBERT, F., Léonard, A., Drion, P., Sourice, S., Pilet, P., & Rompen, E. (2013). The effect of collagenated space filling materials in sinus bone augmentation: a study in rabbits. Clinical Oral Implants Research, 24 (5). doi:10.1111/j.1600-0501.2011.02412.x

LAMBERT, F., Léonard, A., LECLOUX, G., Sourice, S., Pilet, P., & ROMPEN, E. (2013). A comparison of three calcium phosphate based space fillers in sinus elevation: a study in rabbits. International Journal of Oral and Maxillofacial Implants, 28 (2), 393-402. doi:10.11607/jomi.2332

Pambou, Y.-B., Salmon, T., Fraikin, L., Crine, M., & Léonard, A. (10 November 2012). Impact of sludge storage on dewatering and convective drying. Paper presented at Journée scientifique de l'Ecole Doctorale en Génie des Procédés, Louvain La Neuve, Belgium.

Belboom, S., & Léonard, A. (08 November 2012). What is the best use of sugar crops? Environmental asssement of two applications : biofuels vs. bioproducts. Poster session presented at Journée Scientifique Energie, Louvain-la-Neuve, Belgium.

Gerbinet, S., & Léonard, A. (2012). Use of Life Cycle Assessment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: state of the art. In LCA conference 2012 - Proceeding of the 2nd international conference on life cycle approaches (pp. 209-213). France: [avniR] editions.

Gerbinet, S., & Léonard, A. (07 November 2012). Use of Life Cycle Assesment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: state of the art. Poster session presented at 2nd LCA Conference, Lille, France.

Melon, R., Wergifosse, V., Renzoni, R., & Léonard, A. (2012). Life Cycle Assessment of an artisanal Belgian blond beer. In [avniR] editions (Ed.), Proceedings of the 2nd International Conference on life cycle approaches.

Belboom, S., & Léonard, A. (November 2012). What is the best use of sugar crops? Environmental assessment of two potential applications : biofuels vs. bioproducts. Paper presented at 18th SETAC LCA Case Study Symposium - Sustainability Assessment in the 21st Century - tools, trends and applications, Copenhagen, Denmark.

Belboom, S., & Léonard, A. (2012). What is the best use of sugar crops? Environmental assessment of two applications : biofuels vs. bioproducts. In [avniR] editions (Ed.), LCA Conference 2012 - Proceedings of the 2nd international conference on life cycle approaches (pp. 234-238).

Belboom, S., & Léonard, A. (November 2012). What is the best use of sugar crops? Environmental assessment of two applications : biofuels vs. bioproducts. Poster session presented at Congrès ACV : un outil au service de la pensée stratégique, Lille, France.

Gerbinet, S., Renzoni, R., Briard, V., Desert, J.-M., & Léonard, A. (2012). MODELING OF A GLASS WOOL PROCESS IN VIEW OF LIFE CYCLE ASSESSMENT (L.C.A.). In LCA conference 2012 - Proceeding of the 2nd international conference on life cycle approaches (pp. 115-118). France: [avniR] editions.

Gerbinet, S., Renzoni, R., Briard, V., Desert, J.-M., & Léonard, A. (November 2012). MODELING OF A GLASS WOOL PROCESS IN VIEW OF LIFE CYCLE ASSESSMENT (L.C.A.). Poster session presented at 2nd LCA Conference, Lille, France.

Páez Martínez, C., Contreras, S., Léonard, A., Olivera-Fuentes, C., Pirard, J.-P., & Job, N. (October 2012). Adsorption du bleu de méthylène sur des xérogels de carbone activés. Poster session presented at Journées Scientifiques du groupe français d'Etude des Carbones, Houffalize, Belgium.

Tran, M. P., Thomassin, J.-M., Alexandre, M., Plougonven, E., Léonard, A., & Detrembleur, C. (13 September 2012). Effects of Cellular Morphology on Electrical Conductivity of Nanocomposite Foams Containing Carbon Nanotubes. Paper presented at 10th International Conference on Foam Materials & Technology - FOAMS 2012, Barcelona, Spain.

Bennamoun, L., Fraikin, L., Salmon, T., Crine, M., & Léonard, A. (06 September 2012). MODELING WASTEWATER SLUDGE DRYING WITH DETERMINATION OF DIFFUSIVITY MOISTURE. Paper presented at European Conference on Sludge Management, Leon, Spain.

Belboom, S., Renzoni, R., Digneffe, J.-M., & Léonard, A. (September 2012). Waste management evolution through years: evaluation of improvement using Life Cycle Assessment methodology. Paper presented at 4th International Conference on Engineering for Waste and Biomass Valorisation, Porto, Portugal.

Gerbinet, S., & Léonard, A. (28 August 2012). Thermochemical conversion routes of lignocellulosic biomass. Paper presented at BERA workshop, Louvain-La-Neuve, Belgium.

Belboom, S., Misonne, B., Tourneur, F., & Léonard, A. (2012). Les fiches de déclaration environnementale de produits en pierre naturelle belge : un outil indispensable pour l’amélioration de l’impact environnemental de l’exploitation des carrières. Paper presented at Be.Stone - Pierre bleue et construction durable, Soignies, Belgium.

Melon, R., Renzoni, R., Léonard, A., Job, N., & Léonard, A. (2012). Life cycle assessment of carbon xerogels. In E. Fagadar-Cosma (Ed.), Book of abstracts - Advanced Workshop - Insights into novel solid materials, their recyclability and integration into Li polymer batteries for EVs (pp. 51-52). Timisoara, Romania: editura Tempus.

Léonard, A. (2012). Life Cycle Assessment: a useful tool to help sustainable material choices and building eco design. Paper presented at Tour de France en Wallonie. Opération de relations publiques organisée par l'AWEX, Liège, Belgium.

Belboom, S., & Léonard, A. (2012). Impact environnemental de la valorisation de plantes sucrières : comparaison des filières biocarburants de première génération et bioéthylène. Paper presented at La biomasse, ressource énergétique et chimique du futur, Liège, Belgium.

Gerbinet, S., Belboom, S., & Léonard, A. (June 2012). Life Cycle Assessment analysis of photovoltaic power production. Paper presented at ANQUE ICCE 2012, Séville, Spain.

Gerbinet, S., & Léonard, A. (June 2012). Use of Life Cycle Assessment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: state of the art. Poster session presented at ANQUE ICCE 2012, Séville, Spain.

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (01 June 2012). Autocorrelation and the rose diagram for analyzing structure and anisotropy in polymer foams. Paper presented at Avizo European User Group Meeting, Mérignac, France.

Belboom, S., Renzoni, R., Tourneur, F., & Léonard, A. (30 May 2012). Environmental product declarations of mineral paving, a tool for sustainable product choices. Poster session presented at 6th Society and Materials International Conference SAM-6, Leuven, Belgium.

Gerbinet, S., Belboom, S., & Léonard, A. (May 2012). Environmental impact of photovoltaic power by Life Cycle Assessment. Poster session presented at i-SUP2012 Innovation for Sustainable Production, Bruges, Belgium.

Plougonven, E., Srichamnong, W., Srzednicki, G., & Léonard, A. (2012). Characterisation of macadamia nuts using X-ray microtomography. In Micro-CT User Meeting Abstract Book (pp. 58-62).

de Bien, C., Mengoni, M., D'Otreppe, V., Freichels, H., Jérôme, C., Ponthot, J.-P., Léonard, A., & Toye, D. (2012). Development of a biomechanical model of deer antler cancellous bone based on X-ray microtomographic images. In Micro-CT User Meeting 2012 - Abstract Book (pp. 137-145).

Plougonven, E., Detrembleur, C., Tran, M. P., Toye, D., & Léonard, A. (26 March 2012). Microstructure characterisation of nanocomposite polymeric foams by X-ray microtomography. Poster session presented at 6th International Symposium on Process Tomography.

Belboom, S., Renzoni, R., Tourneur, F., & Léonard, A. (22 March 2012). Environmental product declarations of mineral paving, a tool for sustainable product choices. Poster session presented at Which quarry for tomorrow ?, Bruxelles, Belgium.

Gerard, P., Léonard, A., Charlier, R., & Collin, F. (2012). Analyse des mécanismes de transfert de fluides lors d'essais de séchage convectif sur un limon. In F. Skoczykas, C. Davy, F. Agostini, ... N. Burlion (Eds.), Actes du colloque Transfert 2012 - Propriétés de transfert des géomatériaux (pp. 123-131).

Léonard, A. (16 February 2012). From sludge drying follow-up using X-ray microtomography to LCA of processes: 13 years research at the LGC. Paper presented at Séminaire invité, Leuven, Belgium.

Belboom, S., & Léonard, A. (08 February 2012). Energetic systems evaluation using Life Cycle Assessment. Paper presented at Joint PhD Day, Gembloux, Belgium.

Gerbinet, S., & Léonard, A. (08 February 2012). Use of Life Cycle Assessment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: state of the art. Poster session presented at Ph.D. Student Day, Gembloux, Belgium.

Gerbinet, S., & Léonard, A. (2012). Use of Life Cycle Assessment to determine the environmental impact of thermochemical conversion routes of lignocellulosic biomass: state of the art. In Ph.D. Student Day - Proceeding (pp. 38).

Léonard, A. (08 February 2012). Life cycle assessment: a bridge between environmental sciences and bio(chemical) engineering. Paper presented at Ph.D. Student Day, Gembloux, Belgium.

Mengoni, M., Voide, R., de Bien, C., Freichels, H., Jérôme, C., Léonard, A., Toye, D., van Lenthe, G. H., Müller, R., & Ponthot, J.-P. (February 2012). A non-linear homogeneous model for bone-like materials under compressive load. International Journal for Numerical Methods in Biomedical Engineering, 28 (2), 334-348. doi:10.1002/cnm.1473

Arlabosse, P., Ferrasse, J. H., Lecomte, D., Crine, M., Dumont, Y., & Léonard, A. (2012). Efficient sludge thermal processing: from drying to thermal valorisation. In E. Tsotsas & A. S. Mujumdar (Eds.), Modern Drying Technology, Vol 4. Energy savings (pp. 295-329). Weinheim, Germany: Wiley-VCH.

Beckers, E., Roisin, C., Plougonven, E., Deraedt, D., Léonard, A., & Degré, A. (2012). Micro and macroscopic investigation to quantify tillage impact on soil hydrodynamic behaviour. Geophysical Research Abstracts, 14.

Benhebal, H., Chaib, M., Léonard, A., Lambert, S., & Crine, M. (2012). Photodegradation of phenol and benzoic acid by sol-gel-synthesized alkali metal-doped ZnO. Materials Science in Semiconductor Processing, 15 (3), 264–269. doi:10.1016/j.mssp.2011.12.001

Haghgoo, M., Plougonven, E., Yousefi, A. A., Pirard, J.-P., Léonard, A., & Job, N. (2012). Use of X-ray microtomography to study the homogeneity of carbon nanotube aqueous suspensions and carbon nanotube/polymer composites. Carbon, 50 (4), 1703-1706. doi:10.1016/j.carbon.2011.11.031

Páez Martínez, C., Contreras, M. S., Léonard, A., Blacher, S., Olivera-Fuentes, C. G., Pirard, J.-P., & Job, N. (2012). Effect of CO2 activation of carbon xerogels on the adsorption of methylene blue. Adsorption, 18 (3-4), 199-211. doi:10.1007/s10450-012-9394-2

Gerbinet, S., Belboom, S., & Léonard, A. (08 December 2011). Evaluation environnementale de la production d'électricité photovoltaïque par Analyse du Cycle de Vie. Poster session presented at Doctoral Thesis Award for Future Generations & Master's Thesis Award for Future Generations - Architecture, Bruxelles, Belgium.

Gerbinet, S., Belboom, S., & Léonard, A. (2011). Evaluation environnementale de la production d'électricité photovoltaïque par Analyse du Cycle de Vie. In Poster session - Quelles approches transversales pour intégrer le développement durable dans la recherche? Exemples en Fédération Wallonie-Bruxelles - Recueil des Abstracts (pp. 5).

Gerbinet, S., Belboom, S., & Léonard, A. (2011). Evaluation environnementale de la production d'électricité photovoltaïque par Analyse du Cycle de Vie. In Poster session: Quelles approches transversales pour intégrer le développement durable dans la recherche? Exemples en Fédération Wallonie-Bruxelles (pp. 6-7).

Léonard, A., Toye, D., & Plougonven, E. (2011). Formation à la microtomographie.

Léonard, A. (01 December 2011). La pensée "cycle de vie" au cœur des démarches d'éco-conception des procédés. Paper presented at SFGP 2011 – 13ème Congrès bisannuel de la Société Française de Génie des Procédés, Lille, France.

Páez Martínez, C., Contreras, M. S., Léonard, A., Toye, D., Blacher, S., Olivera-Fuentes, C., Pirard, J.-P., & Job, N. (30 November 2011). Adsorption of methylene blue on activated carbon xerogels. Poster session presented at 13ème Congrès de la Société Française de Génie des Procédés, Lille, France.

Fraikin, L., Salmon, T., Herbreteau, B., Nicol, F., Crine, M., & Léonard, A. (29 November 2011). Influence du stockage des boues de STEP sur les émissions de NH3 et de COV durant leur séchage. Poster session presented at XIIIème Congrès de la Société Française de Génie des Procédés, Lille, France.

Plougonven, E., Tran, M. P., Marchot, P., Detrembleur, C., Thomassin, J.-M., & Léonard, A. (29 November 2011). Caractérisation microstructurale de mousses polymères nanocomposites par microtomographie à rayons X. Poster session presented at 13ème congrès de la Société Française de Génie des Procédés, Lille, France.

Léonard, A., Crine, M., & Arlabosse, P. (17 November 2011). Energy efficiency of sludge drying processes. Paper presented at Workshop "Drying of Biomaterials", Liège, Belgium.

Léonard, A. (2011). Génie des procédés chimiques et développement durable.

Belboom, S., Renzoni, R., Léonard, A., & Tourneur, F. (04 November 2011). LCA as decision tool for sustainable choices in mineral materials field: environmental declarations of Belgian products and their foreign equivalents. Paper presented at LCA Conference : a tool for strategic decision making, Lille, France.

Belboom, S., Renzoni, R., Deleu, X., Digneffe, J.-M., & Léonard, A. (03 November 2011). WEEE management using LCA methodology : the fridge case study. Poster session presented at LCA Conference : a tool for strategic decision making, Lille, France.

Belboom, S., Renzoni, R., Digneffe, J.-M., & Léonard, A. (03 November 2011). Environmental performance of waste management through years using Life Cycle Assessment. Paper presented at LCA Conference : a tool for strategic decision making, Lille, France.

Gerbinet, S., Belboom, S., & Léonard, A. (2011). Environmental impact of photovoltaic power by Life Cycle Assessment. In Conference Proccedings - Volume 1 : Academic Papers (pp. 80-83).

Gerbinet, S., Belboom, S., & Léonard, A. (03 November 2011). Environmental impact of photovoltaic power by Life Cycle Assessment. Poster session presented at Congrès ACV: L’Analyse du Cycle de Vie au service de la « pensée stratégique », Lille, France.

Melon, R., Renzoni, R., Léonard, A., Job, N., & Léonard, A. (03 November 2011). Life cycle assessment of carbon xerogels. Poster session presented at LCA conference: L'analyse du cycle de vie au service de la pensée stratégique, Lille, France.

Belboom, S., Renzoni, R., Deleu, X., Digneffe, J.-M., & Léonard, A. (2011). WEEE management using LCA methodology : the fridge case study. In Conference Proccedings - Volume 1 : Academic Papers (pp. 100-103).

Gerbinet, S., Belboom, S., & Léonard, A. (2011). La valorisation du digestat : une contribution essentielle au bénéfice environnemental d'une unité de biométhanisation. Paper presented at BEST : 10ème salon européen de l'environnement, de l'énergie et des technologies propres, Liège, Belgium.

Gerbinet, S., Belboom, S., & Léonard, A. (2011). Etude de l’impact environnemental de la production d’électricité verte par voie photovoltaïque. Paper presented at BEST 10ème salon européen de l'environnement, de l'énergie et des technologies propres, Liège, Belgium.

Boutaayamou, M., Léonard, A., Vanderheyden, B., & Vanderbemden, P. (2011). Study of Conduction Mechanisms in Antistatic Felts at the Mesoscopic Scale. In International Symposium on New Frontiers in Fiber Materials Science; Conference Proceedings.

Bazzaoui, R., Fraikin, L., Groslambert, S., Salmon, T., Crine, M., & Léonard, A. (October 2011). IMPACT OF SLUDGE CONDITIONING ON MECHANICAL DEWATERING AND CONVECTIVE DRYING. Poster session presented at European Drying Conference - EuroDrying'2011, Palma. Balearic Island, Spain.

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (21 September 2011). Microstructure characterisation of nanocomposite polymeric foams by X-ray microtomography. Poster session presented at 4th International Workshop on Process Tomography, Chengdu, China.

Belboom, S., & Léonard, A. (September 2011). Improving bioethanol production by increasing sugar beet crop yield. CAB Reviews: Perspectives in Agriculture, Veterinary Science, Nutrition and Natural Resources, 6 (24), 1-10. doi:10.1079/PAVSNNR20116024

Belboom, S., & Léonard, A. (2011). Impact environnemental des procédés de valorisation des boues : revue des ACV réalisées. Paper presented at Journée d'études sur la "valorisation des boues", Liège, Belgium.

Léonard, A. (27 June 2011). Efficacité énergétique des procédés de valorisation thermique des boues d'épuration. Paper presented at Journée d'étude sur la valorisation des boues, Liège, Belgium.

Léonard, A., & Arlabosse, P. (19 May 2011). Efficacité énergétique des procédés de séchage de boues d'épuration. Paper presented at Journées AFSIA 2011, Paris, France.

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (2011). Methodology for the characterization of the microstructure of nanocomposite polymeric foams using X-ray microtomography. In Micro-CT User Meeting Abstract Book.

Belboom, S., Renzoni, R., & Léonard, A. (2011). La fiche de déclaration environnementale de produits en pierre naturelle belge : un argument majeur contre la concurrence asiatique. Paper presented at Bois & Habitat, Namur, Belgium.

Belboom, S., Renzoni, R., Deleu, X., Digneffe, J.-M., & Léonard, A. (01 March 2011). WEEE management using LCA methodology : the fridge case study. Poster session presented at 17 th LCA Case Studies Symposium, Budapest, Hungary.

Belboom, S., Renzoni, R., Deleu, X., Digneffe, J.-M., & Léonard, A. (2011). WEEE management using LCA methodology : the fridge case study. In SETAC Europe 17th LCA Case Studies Symposium : "Sustainable lifestyles", Budapest 28 February - 1 March 2011. Budapest, Hungary: Arisztotelesz Kiado.

Beekkerk van Ruth, J., Degre, A., Aubinet, M., Roisin, C., Léonard, A., & Beckers, E. (23 February 2011). ANALYSING THE SOIL STRUCTURE UNDER DIFFERENT TILLAGE SYSTEMS USING X-RAY MICROTOMOGRAPHY AND PF CURVES.

Belboom, S., Renzoni, R., Verjans, B., Léonard, A., & Germain, A. (February 2011). A life cycle assessment of injectable drug primary packaging: comparing the traditional process in glass vials with the closed vial technology (polymer vials). International Journal of Life Cycle Assessment, 16 (2), 159-167. doi:10.1007/s11367-011-0248-z

Almazan Almazan, M. D. C., Léonard, A., Job, N., López-Garzón, J., Pirard, J.-P., & Blacher, S. (2011). Three-dimensional void space structure of activated carbon packed beds. Journal of Porous Materials, 18, 761–766. doi:10.1007/s10934-010-9438-5

Almazán-Almazán, M. C., López-Domingo, F. J., Domingo-García, M., Léonard, A., Pérez-Mendoza, M., Pirard, J.-P., López-Garzón, F. J., & Blacher, S. (2011). Influence of carbon xerogel textural properties on the dynamic adsorption of methyl iodide. Chemical Engineering Journal, 173 (1), 19-28. doi:10.1016/j.cej.2011.07.027

Beckers, E., Léonard, A., Beekkerk van Ruth, J., Roisin, C., & Degre, A. (2011). Impact of thresholding techniques on X-ray soil microtomogram analyses. Geophysical Research Abstracts, 13.

Belboom, S., Renzoni, R., Digneffe, J.-M., & Léonard, A. (2011). Evolution of municipal waste management in Belgium (Liège) for the last thirty years. In SETAC Europe 17th LCA Case Studies Symposium : "Sustainable lifestyles", Budapest 28 February - 1 March 2011. Budapest, Hungary: Arisztotelesz Kiado.

Belboom, S., Renzoni, R., Digneffe, J.-M., & Léonard, A. (2011). Évolution de l’impact environnemental lié à la gestion des déchets ménagers en Belgique (Liège) durant les trente dernières années. In SFGP (Ed.), Récents Progrès en Génie des Procédés. Paris, France: Ed. SFGP.

Belboom, S., Renzoni, R., Léonard, A., & Tourneur, F. (2011). Life cycle assessment as decision tool for sustainable choices in mineral materials field: environmental declarations of Belgian products and their foreign equivalents. In P. N. Martens (Ed.), Sustainable Development in the Minerals Industry : Institute of Mining Engineering I, RWTH Aachen University, 14-17 June 2011 (pp. 535-538). Essen, Germany: VGE Verlag GmbH.

Benhebal, H., Chaib, M., Léonard, A., Lambert, S., & Crine, M. (2011). Synthesis, characterization and photocatalytic properties of alkali metals doped tin dioxide. Journal of Molecular Structure, 1004 (1-3), 222-226. doi:10.1016/j.molstruc.2011.08.009

Bennamoun, L., & Léonard, A. (2011). Etude expérimentale et modélisation du séchage de boues générées par l’épuration des eaux usées. Revue des Energies Renouvelables, 14 (1), 1-12.

Fraikin, L., Salmon, T., Herbreteau, B., Levasseur, J.-P., Nicol, F., Crine, M., & Léonard, A. (2011). Impact of Storage Duration on the Gaseous Emissions during Convective Drying of Urban Residual Sludges. Chemical Engineering and Technology, 34 (7), 1172--1176. doi:10.1002/ceat.201100071

LAMBERT, F., LECLOUX, G., Léonard, A., Layrolle, P., Sourice, S., & ROMPEN, E. (2011). Bone regeneration using porous titanium particles vs. bovine hydroxyapatite: a sinus lift study in rabbits. Poster session presented at 20th Annual Meeting of the European Association For Osseointegration, Athens, Greece.

Lambert, F., Léonard, A., Drion, P., Sourice, S., Layrolle, P., & Rompen, E. (2011). Influence of space-filling materials in subantral bone augmentation: blood clot vs. autogenous bone chips vs. bovine hydroxyapatite. Clinical Oral Implants Research, 22 (5), 538-545. doi:10.1111/j.1600-0501.2010.02069.x

Léonard, A. (2011). Vecteurs énergétiques et énergies renouvelables. (FORMATION IFC - « Sciences et Technologies pour relever le défi d’une société zéro émission de carbone »).

Léonard, A. (2011). Management of Wastewater Sludge's: A Hot Topic at the European Level. Journal of Residuals Science and Technology, 8 (2), 38-38.

Mengoni, M., Voide, R., Toye, D., Léonard, A., van Lenthe, G. H., & Ponthot, J.-P. (2011). A non-linear homogeneous model for bone-like materials under compressive load. In P. Nithiarasu, R. Löhner, R. van Loon, I. Sazonov, ... X. Xie (Eds.), Conference Proceedings - 2nd International Conference on Computational & Mathematical Biomedical Engineering (pp. 355-358).

Metzger, T., Léonard, A., Jomaa, W., & Tamon, H. (2011). Understanding and preventing structural changes during drying of gels. In E. Tsotsas & A. S. Mujumdar (Eds.), Modern Drying Technology, Vol 3. Product quality and formulation (pp. 155-230). Weinheim, Germany: Wiley-VCH. doi:10.1002/9783527631667.ch5

Spinosa, L., Ayol, A., Baudez, J.-C., Canziani, R., Jenicek, P., Léonard, A., Rulkens, W., Xu, G., & van Dijk, L. (2011). Sustainable and Innovative Solutions for Sewage Sludge Management. Water, 3 (2), 702-717. doi:10.3390/w3020702

Srichamnong, W., Plougonven, E., Léonard, A., & Srzednicki, G. (2011). X-ray microtomography of macadamia nuts. In Récents Progrès en Génie des Procédés.

Beekkerk van Ruth, J., Degre, A., Aubinet, M., Roisin, C., Léonard, A., & Beckers, E. (16 December 2010). Analysing the soil structure under different mulch and tillage systems using X-Ray tomography. Paper presented at Soil CO2 Meeting, Gembloux, Belgium.

Belboom, S., Renzoni, R., & Léonard, A. (2010). La fiche de déclaration environnementale des produits en pierre naturelle belge : un argument majeur contre la concurrence asiatique. Paper presented at Forum Carrières et Développement Durable, Namur, Belgium.

Belboom, S., & Léonard, A. (2010). Life Cycle Assessment: a key decision tool for biomass valorization. Paper presented at Sustainable Biomass for European Energy, Bruxelles, Belgium.

Beckers, E., Roisin, C., Léonard, A., & Degre, A. (November 2010). Evolution des structures de sols sous itinéraires techniques contrastés : relations entre courbes de rétention et analyse par microtomographie à rayons X. Milieux Poreux et Transferts Hydriques, 56, 136-140.

Beckers, E., Roisin, C., Léonard, A., & Degre, A. (November 2010). Evolution des structures de sols sous itinéraires techniques contrastés : relation entre courbes de rétention et analyse par microtomographie aux rayons X. Poster session presented at 35èmes journées du GFHN, Louvain-la-neuve, Belgium.

Lambert, F., Léonard, A., Drion, P., Layrolle, P., & Rompen, E. (06 October 2010). Influence of space filling materials in sub-sinusal bone augmentation: Clot vs Autogenous bone chips vs Bovine Hydroxyapatite. Poster session presented at 19th Annual EAO Meeting, Glasgow, United Kingdom.

Bennamoun, L., Belhamri, A., & Léonard, A. (2010). Contribution to the modeling of wastewater sludge drying kinetics: study of the operating conditions effect. In E. Tsotsas, T. Metzger, ... M. Peglow (Eds.), Proceedings of IDS 2010 - Drying 2010 (pp. 828-833).

Fraikin, L., Herbreteau, B., Chaucherie, X., Nicol, F., Salmon, T., Crine, M., & Léonard, A. (2010). Impact of storage duration on the emissions of ammonia and VOC during the convective drying of urban residual sludges. In E. Tsotsas, T. Metzger, ... M. Peglow (Eds.), Proceedings of IDS 2010 - Drying 2010 (pp. 738-741).

Gerard, P., Léonard, A., Charlier, R., & Collin, F. (2010). On the modeling of convective drying tests on soil samples in non-isothermal conditions. In E. Tsotsas, T. Metzger, ... M. Peglow (Eds.), Proceedings of IDS 2010 - Drying 2010 (pp. 447-454).

Léonard, A., & Crine, M. (2010). Aspects pratico-techniques du séchage des boues d'épuration. Paper presented at Journée sur la valorisation des déchets solides, Namur, Belgium.

Renzoni, R., Belboom, S., & Léonard, A. (2010). Evaluation environnementale de filières de valorisation de déchets par analyse de cycle de vie. Paper presented at Journée sur la valorisation des déchets solides, Namur, Belgium.

Contreras, M. S., Páez, C. A., Zubizarreta, L., Léonard, A., Blacher, S., Olivera-Fuentes, C. G., Arenillas, A., Pirard, J.-P., & Job, N. (September 2010). A comparison of physical activation of carbon xerogels with carbon dioxide with chemical activation using hydroxides. Carbon, 48 (11), 3157-3168. doi:10.1016/j.carbon.2010.04.054

Fraikin, L., Herbreteau, B., Chaucherie, X., Nicol, F., Crine, M., & Léonard, A. (September 2010). Impact of storage at 4°C on the study of sludge drying emissions. Paper presented at ECSM 2010 – 2nd European Conference on Sludge Management, Budapest, Hungary.

Royer, S., Blandin, G., Salmon, T., Fraikin, L., Crine, M., & Léonard, A. (September 2010). Impact of liming operating conditions on the convective drying kinetics of urban residual sludges. Paper presented at ECSM 2010 – 2nd European Conference on Sludge Management, Budapest, Hungary.

Gommes, C., Lambert, S., Job, N., & Léonard, A. (27 June 2010). From nm to mm : Multiscale textural and structural characterization of particulate systems at the department of chemical engineering. Paper presented at International Fine Particle Research Institute (IFPRI) general meeting, Liège, Belgium.

Léonard, A. (10 June 2010). Introduction – L’Analyse du Cycle de vie au sein des outils de management. Paper presented at Colloque consacré à l’évaluation environnementale des produits par analyse du cycle de vie (LCA – écobilan), Liège, Belgium.

Belboom, S., & Léonard, A. (2010). Analyse par cycle de vie des systèmes énergétiques.

Léonard, A. (27 May 2010). Les voies traditionnelles de production d’hydrogène. Paper presented at Journée d'étude : L'Hydrogène : Vecteur énergétique, Liège, Belgium.

Beckers, E., Ly, S., Léonard, A., & Degre, A. (May 2010). Comparison of agricultural soils' structure depending on tillage system using X-ray microtomography. Geophysical Research Abstracts, 12, 2010-12722.

Belboom, S., Halleux, H., Léonard, A., Renzoni, R., & Germain, A. (01 February 2010). Life cycle environmental performance of using substitution fuels in cement production. Poster session presented at SETAC Europe 16th LCA Case Studies Symposium, Poznan, Poland.

Belboom, S., Halleux, H., Léonard, A., Renzoni, R., & Germain, A. (2010). Life cycle environmental performance of using substitution fuels in cement production. In Programme book : SETAC EUrope 16th LCA Case Studies Symposium : From simplified LCA to advanced LCA.

Belboom, S., Renzoni, R., Verjans, B., Léonard, A., & Germain, A. (01 February 2010). A life-cycle assessment of injectable drug primary packaging : comparing the traditional process in glass vials with the new Closed Vial technology (polymer vials). Poster session presented at SETAC Europe 16th LCA Case Studies Symposium : From simplified LCA to advanced LCA, Poznan, Poland.

Belboom, S., Renzoni, R., Verjans, B., Léonard, A., & Germain, A. (2010). A life-cycle assessment of injectable drug primary packaging : comparing the traditional process in glass vials with the new Closed Vial technology (polymer vials). In Programme book : SETAC EUrope 16th LCA Case Studies Symposium : From simplified LCA to advanced LCA.

Debaste, F., Léonard, A., Halloin, V., & Haut, B. (2010). Microtomographic investigation of a yeast grain porous structure. Journal of Food Engineering, 97, 526-532. doi:10.1016/j.jfoodeng.2009.11.012

Escalona, I., Jomaa, W., Olivera-Fuentes, C., Crine, M., & Léonard, A. (2010). Convective drying of gels: comparison between simulated and experimental moisture profiles obtained by X-ray microtomography. Drying Technology, 28 (5), 644-650. doi:10.1080/07373931003788734

Fraikin, L., Herbreteau, B., Chaucherie, X., Nicol, F., Crine, M., & Léonard, A. (2010). Influence of operating conditions on the gaseous emissions related to urban residual sludge convective drying. Poster session presented at 19th International Congress of Chemical and Process Engineering CHISA 2010 and the 7th European Congress of Chemical Engineering ECCE-7, Prague, Czechia.

Gerard, P., Léonard, A., Masekanya, J.-P., Charlier, R., & Collin, F. (2010). Study of the soil-atmosphere moisture exchanges through convective drying tests in non-isothermal conditions. International Journal for Numerical and Analytical Methods in Geomechanics, 34 (12), 1297-1320. doi:10.1002/nag.866

Huron, Y., Salmon, T., Blandin, G., Crine, M., & Léonard, A. (2010). Effect of liming on the convective drying of urban residual sludges. Asia-Pacific Journal of Chemical Engineering, 5, 909-914. doi:10.1002/apj.421

Léonard, A., Belboom, S., & Renzoni, R. (2010). L'analyse de cycle de vie. (ULiège - Université de Liège, FORMATION IFC - « Sciences et Technologies pour relever le défi d’une société zéro émission de carbone »).

Verdin, E., Beugre, D. A., Parra, J. B., Toye, D., Marchot, P., Ania, C. O., & Léonard, A. (2010). Lattice Boltzmann 3D flow simulation based on X-ray microtomographic images of activated carbon beds. Poster session presented at FOA10- 10th Internationnal Conference on Fundamentals of adsorption, 23-28 Mai 2010, Hyogo, Japan.

Verdin, E., Parra, J. B., Toye, D., Crine, M., Lodewyckx, P., Ania, C., & Léonard, A. (2010). Dynamic adsorption of methyl iodide on carbon beds obtained from poly(ethylene) terephthalate wastes followed by X-ray microtomography. Poster session presented at 10th International Conference on Fundamentals of Adsorption, 23-28 mai 2010, Hyogo, Japan.

Verdin, E., Toye, D., Crine, Lodewyckx, P., & Léonard, A. (2010). Study of the impact of constant and pulsating flows of organic and water vapours on carbon filters breakthrough curves. Paper presented at Carbon 2010 – “From Nano to Macro", 11 – 16 July 2010, Clemson, United States - South Carolina.

Verdin, E., Toye, D., Crine, M., Lodewyckx, P., & Léonard, A. (2010). Study of the impact of constant and pulsating flows of organic vapours on carbon filters breakthrough curves. Poster session presented at 19th Congress of Chemical and Process Engineering (CHISA2010) – 7th European Congress of Chemical Engineering (ECCE7), 28 aout–2 septembre 2010, Prague, Czechia.

Fraikin, L., Herbreteau, B., Nicol, F., Brunel, S., Crine, M., & Léonard, A. (2009). Émissions gazeuses liées au séchage convectif de boues de station d’épuration. In SFGP (Ed.), Récents Progrès en Génie des Procédés - N°98 - A la croisée des sciences et des cultures pour relever les défis industriels du XXIème siècle - Actes du 12ème Congrès de la Société Française de Génie des Procédés, Marseille, France, 14-16 octobre 2009 (pp. 341). Paris, France: Lavoisier - Technique et Documentation.

Gerard, P., Léonard, A., Charlier, R., & Collin, F. (September 2009). Characterization of vapour transfers in non isothermal conditions at cavities wall using convective drying tests. Poster session presented at THMC Conference - Timodaz+Teresa projects, Luxembourg, Luxembourg.

Almazan, M. D. C., Léonard, A., Lodewyckx, P., Pirard, J.-P., López-Garzón, J., & Blacher, S. (June 2009). Evaluation of the dynamic adsorption of gas on active carbon beds using in situ X-ray µ-tomography coupled with 3D image analysis. Poster session presented at ECS10 - 10th European Congress of Stereology and Image Analysis, Milan, Italy.

Almazan, M. D. C., Léonard, A., López-Garzón, J., Abdullah, J., Marchot, P., & Blacher, S. (2009). 3D characterisation of the structure of activated carbon packed beds using X-ray microtomography. In 3rd International Workshop on Process Tomography (CD Rom).

Almazan, M. D. C., Léonard, A., Toye, D., Lodewyckx, P., Pirard, J.-P., Lopez Garzon, F. J., & Blacher, S. (2009). In situ follow-up of adsorption in activated carbon beds using X-ray microtomography. In S. Kaskel, P. Llewellyn, F. Rodriguez-Reinoso, ... N. A. Seiton (Eds.), Characterisation of Porous Solids VII - Proceedings of the 8th International Symposium on the Characterisation of Porous Solids (pp. 233-239). Cambridge, United Kingdom: The Royal Society of Chemistry.

Calvo, S., Beugre, D. A., Crine, M., Léonard, A., Marchot, P., & Toye, D. (2009). Phase distribution measurements in metallic foam packing using X-ray radiography and micro-tomography. Chemical Engineering and Processing: Process Intensification, 48 (5), 1030-1039. doi:10.1016/j.cep.2009.02.001

Caulkin, R., Jia, X., Xu, C., Fairweather, M., Williams, R. A., Stitt, H., Nijemeisland, M., Aferka, S., Crine, M., Léonard, A., Toye, D., & Marchot, P. (2009). Simulations of Structures in Packed Columns and Validation by X-ray Tomography. Industrial and Engineering Chemistry Research, 48 (1), 202-213. doi:10.1021/ie800033a

Escalona, I., Gommes, C., Job, N., Blacher, S., Olivera-Fuentes, C., Pirard, J.-P., & Léonard, A. (2009). Water desorption from resorcinol-formaldehyde hydrogels and adsorption in the resulting xerogels. Microporous and Mesoporous Materials, 117, 61-66. doi:10.1016/j.micromeso.2008.06.007

Jinorose, M., Devahastin, S., Blacher, S., & Léonard, A. (2009). Application of image analysis in food drying. In C. Ratti (Ed.), Advances in Food Dehydration (pp. 63-95). CRC Press.

Léonard, A., Blandin, G., & Crine, M. (2009). Importance of rheological properties when drying sludge in a fixed bed. In 4th Inter-American Drying Conference: Challenges for efficient drying processes (pp. 258-263).

Léonard, A., & Crine, M. (2009). Selected Papers Presented During ECSM'08-European Conference on Sludge Management, Liege, September 1-2, 2008. Journal of Residuals Science and Technology, 6 (1), 1-1.

Léonard, A., Fostroy, P., Salmon, T., Toye, D., & Crine, M. (2009). Traitement d'effluents colorés par adsorption sur des matériaux produits à partir de boues d'épuration. Poster session presented at 12ème Congrès de la Société Française de Génie des Procédés, 14-16 octobre 2009, Marseille, France.

Pirard, E., Califice, A., Léonard, A., & Gregoire, M. (2009). Multiscale shape analysis of particles in 3D using the calypter. Paper presented at 10 European Congress for Stereology, Milano, Italy.

Tondi, G., Blacher, S., Léonard, A., Pizzi, A., Fierro, V., Leban, J. M., & Celzard, A. (2009). X-Ray Microtomography Studies of Tannin-Derived Organic and Carbon Foams. Microscopy and Microanalysis, 15, 384-394. doi:10.1017/S1431927609990444

Verdin, E., Beugre, D. A., Ania, C., Parra, J., Toye, D., Marchot, P., Crine, M., & Léonard, A. (2009). Simulation de l’écoulement dans des filtres à charbons actifs par la méthodologie des réseaux de Boltzmann. In SFGP (Ed.), Récents Progrès en Génie des Procédés - N°98 - A la croisée des sciences et des cultures pour relever les défis industriels du XXIème siècle - Actes du 12ème Congrès de la Société Française de Génie des Procédés, Marseille, France, 14-16 octobre 2009. Paris, France: Lavoisier - Technique et Documentation.

Crine, M., & Léonard, A. (20 November 2008). Drying of wastewater sludge’s, common practice and challenges. Paper presented at Annual Drying Symposium of the Dutch Drying Group, Utrecht, Netherlands.

Escalona, I., Jomaa, W., Olivera-Fuentes, C., Crine, M., & Léonard, A. (2008). Convective drying of gels: comparison between simulated and experimental moisture profiles obtained by X-ray microtomography. In B. N. Thorat (Ed.), Drying 2008 - Proceedings of the 16th International Drying Symposium (IDS2008), Vol. C (pp. 1209-1215).

Gommes, C., Almazan, M. D. C., Léonard, A., & Blacher, S. (November 2008). Determination of the tortuosity of porous materials from binary or grey-tone tomographic reconstructions. Paper presented at 3d Imaging, Analysis, Modelling and Simulation of Macroscopic Properties, Kaiserslautern, Germany.

Gerard, P., Bernadino, J., Léonard, A., Charlier, R., & Collin, F. (06 October 2008). Convective drying tests of silt: experimental studies and modelling. Paper presented at Workshop ALERT 2008, Aussois, France.

Debaste, F., Léonard, A., Halloin, V., & Haut, B. (September 2008). Pore size distribution of baker’s yeast evaluation using x-ray micro-tomography. Poster session presented at CHEMPOR 2008 - 10th International Chemical and Biological Engineering Conference, Braga, Portugal.

Fostroy, P., Salmon, T., Crine, M., & Léonard, A. (September 2008). Production of adsorbent materials from dried residual sludges. Poster session presented at ECSM’08 – European Conference on Sludge Management, Liège, Belgium.

Huron, Y., Salmon, T., Crine, M., Blandin, G., & Léonard, A. (September 2008). Effect of liming on the convective drying of urban residual sludges. Paper presented at ECSM’08 – European Conference on Sludge Management, Liège, Belgium.

Léonard, A., Calberg, C., Kerckhofs, G., Wevers, M., Jérôme, R., Pirard, J.-P., Germain, A., & Blacher, S. (August 2008). Characterization of the porous structure of biodegradable scaffolds obtained with supercritical CO2 as foaming agent. Journal of Porous Materials, 15 (4), 397-403. doi:10.1007/s10934-006-9094-y

Léonard, A., Nicolas, J., Romain, A.-C., & Crine, M. (June 2008). The problem of odours when drying sewage sludges. Paper presented at Business meeting of the Drying Working Party of the European Federation of Chemical Engineering, Copenhague, Denmark.

Verdin, E., Ania, C. O., Gommes, C., Léonard, A., Parra, J. B., Toye, D., Crine, M., & Blacher, S. (June 2008). 3D characterization of the porous structure of activated carbon packed beds using X-ray microtomography. Poster session presented at COPS VIII - 8th International Symposium on the Characterisation of Porous Solids, Edinburgh, United Kingdom.

Léonard, A., Crine, M., & Jomaa, W. (May 2008). Coupled thermo-hygro-mechanical simulation of a convective drying process. Paper presented at ACOMEN - Advanced COmputational Methods in Engineering, Liège, Belgium.

Léonard, A., Blacher, S., Nimmol, C., & Devahastin, S. (March 2008). Effect of far-infrared radiation assisted drying on microstructure of banana slices: An illustrative use of X-ray microtomography in microstructural evaluation of a food product. Journal of Food Engineering, 85 (1), 154-162. doi:10.1016/j.jfoodeng.2007.07.017

Léonard, A., Meneses, E., Le Trong, E., Salmon, T., Marchot, P., Toye, D., & Crine, M. (10 February 2008). Influence of Back Mixing on the Convective Drying of Residual Sludges in a Fixed Bed. Water Research, 42 (10-11), 2671-2677. doi:10.1016/j.watres.2008.01.020

Gerard, P., Bernardino, J., Léonard, A., Charlier, R., & Collin, F. (2008). Convective drying tests of silts: Experimental study. In J.-P. Magnan, R. Cojean, ... Y. J. Cui (Eds.), International Symposium Drought and Constructions Marne-La-Vallée 1-3 Septembre 2008 (pp. 149-154). Jouve, France: LCPC.

Léonard, A., Blacher, S., Crine, M., & Jomaa, W. (2008). Evolution of mechanical properties and final textural properties of resorcinol-formaldehyde xerogels during ambient air drying. Journal of Non-Crystalline Solids, 354 (10-11), 831-838. doi:10.1016/j.jnoncrysol.2007.08.024

Léonard, A., Crine, M., & Stepanek, F. (2008). Use of X-ray tomography for drying-related applications. In E. Tsotsas & A. S. Mujumdar, Modern Drying Technology, Vol 2. Experimental Techniques (pp. 143-186). Wiley-VCH.

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2008). In situ observation of wall effects in activated carbon filters by X-ray microtomography. Separation and Purification Technology, 64 (1), 127-130. doi:10.1016/j.seppur.2008.08.008

Léonard, A., & Crine, M. (November 2007). Applications of X-ray microtomography in material and life sciences. Poster session presented at BSM2007 – Exploring materials, living systems and their interactions – Réunion annuelle de la Société Belge de Microscopie, Liège, Belgium.

Léonard, A., Toye, D., Marchot, P., & Crine, M. (November 2007). Applications de la microtomographie à rayons X en génie des procédés. Paper presented at Séminaire donné à "l’Université Libre de Bruxelles, Service de Génie Chimique, Bruxelles, Belgium.

Léonard, A., Martin, G., Nicolas, J., Romain, A.-C., & Crine, M. (October 2007). Study of VOC and odour emissions during the convective drying of urban residual sludges. Paper presented at Symposium International sur les Ecotechnologies appliquées aux boues résiduaires - Eco-process et Eco-utilisation, Montoldre, France.

Léonard, A., Toye, D., Marchot, P., & Crine, M. (2007). Intérêt de la microtomographie à rayons X pour la formulation de produits agroalimentaires. In SFGP (Ed.), Récents progrès en génie des procédés N° 96 2007 : actes du 11° Congrès de la Société Française de Génie des Procédés 9-10-11 Octobre 2007, Saint-Étienne, France. Paris, France: Lavoisier Technique et Documentation.

Léonard, A., Wullens, H., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Visualisation d'effets de paroi dans des lits de charbon actif par microtomographie à rayons X. In SFGP (Ed.), Récents progrès en génie des procédés N° 96 2007 : actes du 11° Congrès de la Société Française de Génie des Procédés 9-10-11 Octobre 2007, Saint-Étienne, France. Paris, France: Lavoisier Technique et Documentation.

Jia, X., Xu, C., Caulkin, R., Williams, R. A., Stitt, H., Nijemeisland, M., Aferka, S., Crine, M., Léonard, A., Toye, D., & Marchot, P. (2007). Validation of DigiPac Simulations of packed columns using x-ray microtomography. In H. Mc Cann & G. A. Johansen (Eds.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (pp. 382-389). Virtual Centre for Industrial Process Tomography.

Léonard, A., Crine, M., & Jomaa, W. (September 2007). Production of cylindrical carbon xerogel monoliths: effect of sample diameter on drying-induced cracks. Paper presented at ECCE6 - 6th European Congress of Chemical Engineering, Copenhague, Denmark.

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Observation of wall effects in activated carbon filters by x-ray µCT. In H. Mc Cann & G. A. Johansen (Eds.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (pp. 342-347). Virtual Centre for Industrial Process Tomography.

Job, N., Léonard, A., Lambert, S., D’Souza, L., Heinrichs, B., Crine, M., Regabulto, J. R., & Pirard, J.-P. (August 2007). Carbon xerogels as catalyst supports. Poster session presented at Europacat VIII, Turku, Finland.

Léonard, A., Escalona, I., Job, N., Olivera-Fuentes, C., Pirard, J.-P., Crine, M., & Blacher, S. (15 July 2007). Water desorption isotherms of resorcinol-formaldehyde and carbon xerogels. Poster session presented at Carbon Conference 2007, Seattle, United States.

Léonard, A., Blacher, S., Wullens, H., Crine, M., & Lodewyckx, P. (2007). Re-evaporation of adsorbed (toxic) compounds inside an activated carbon filter. In The American Carbon Society (Ed.), Proceedings of Carbon 2007. Madison, WI, United States: Omnipress.

Léonard, A., Escalona, I., Job, N., Olivera-Fuentes, C., Pirard, J.-P., Crine, M., & Blacher, S. (2007). Water desorption isotherms of resorcinol-formaldehyde and carbon xerogels. In The American Carbon Society (Ed.), Proceedings of Carbon 2007.

Toye, D., Aferka, S., Calvo, S., Léonard, A., Crine, M., Saroha, A., & Marchot, P. (2007). Mesure de la distribution des phases dans une mousse métallique par radiographie et micro-tomographie à rayons X. In Récents Progrès en Génie des Procédés - N°95 - Actes des 5èmes Journées francophones sur les réacteurs gaz-liquide et gaz-liquide-solide, 12-15 juin 2007, Carry-le-Rouet, France. Paris, France: Lavoisier - Technique et Documentation.

Léonard, A., Crine, M., & Jomaa, W. (2007). Effect of sample size on the mechanical stresses induced during the convective drying of highly shrinking materials. In Proceedings of the joint conference of AFSIA and Drying Working group of EFCE at Casino Municipal Biarritz, France, 24th and 25th May, 2007 (pp. 18-19). AFSIA.

Léonard, A., Nimmol, C., Blacher, S., & Devahastin, S. (April 2007). Characterization of dried banana chips quality by X-ray µ-CT. Paper presented at Skyscan user meeting 2007, Bruges, Belgium.

Léonard, A., Guiot, L. P., Pirard, J.-P., Crine, M., Balligand, M., & Blacher, S. (March 2007). Non-destructive characterization of deer (Cervus Elaphus) antlers by X-ray microtomography coupled with image analysis. Journal of Microscopy, 225 (Pt 3), 258-263. doi:10.1111/j.1365-2818.2007.01740.x

Job, N., Panariello, F., Crine, M., Pirard, J.-P., & Léonard, A. (01 February 2007). Rheological determination of the sol-gel transition during the aqueous synthesis of resorcinol-formaldehyde resins. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 293 (1-3), 224-228. doi:10.1016/j.colsurfa.2006.07.037

Léonard, A., Devahastin, S., & Blacher, S. (February 2007). 3D image analysis characterization of dried banana. Paper presented at 30ème Journée de la section Française de la Société Internationale de Stéréologie, Paris, France.

Léonard, A., Blacher, S., & Devahastin, S. (2007). Characterization of dried banana porous structure by X-ray microtomography coupled with image analysis. In G. Chen (Ed.), The proceedings of the 5th Asia-Pacific Drying Conference, Hong Kong, 13 – 15 August 2007, Vol. 1 (pp. 197-202). World Scientific Publishing.

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Observation of wall effects in activated carbon filters by X-ray μCT. In 5th World Congress in Industrial Process Tomography (pp. 342-347). International Society for Industrial Process Tomography.

Marchot, P., Beugre, D. A., Crine, M., Dethier, G., Léonard, A., & Toye, D. (2007). Lattice Boltzmann 3D flow simulations in a hepa aerosol filter, on a computing grid. Paper presented at ECCE6 - 6th European Congress of Chemical Engineering, 16-21 septembre 2007, Copenhague, Denmark.

Toye, D., Aferka, S., Calvo, S., Léonard, A., Crine, M., Saroha, A., & Marchot, P. (2007). Phase distribution measurements in metallic foam using x-ray radiography and micro-tomography. In G. A. Johansen & H. Mc Cann (Ed.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (CD-ROM) (pp. 761-767). Virtual Centre for Industrial Process Tomography.

Léonard, A., Blacher, S., Crine, M., & Lodewyckx, P. (2006). X-ray microtomography: a useful method to study the dynamics of organic and water vapours adsorption on carbon filters. In 2006 AIChE Annual Meeting.

Léonard, A., Toye, D., Marchot, P., & Crine, M. (26 October 2006). Application des techniques tomographiques en génie des procédés. Paper presented at Séminaire donné à "l’École des Mines d’Albi-Carmaux, Centre Rapsodee, Albi, France.

Job, N., Sabatier, F., Pirard, J.-P., Crine, M., & Léonard, A. (October 2006). Towards the production of carbon xerogel monoliths by optimizing convective drying conditions. Carbon, 44 (12), 2534-2542. doi:10.1016/j.carbon.2006.04.031

Léonard, A., Sabatier, F., Job, N., Pirard, J.-P., & Crine, M. (25 September 2006). Study of shrinkage and cracks development during the production of resorcinol-formaldehyde xerogels by µ-CT. Poster session presented at 9th European Conference for Non-Destructive Testing, Berlin, Germany.

Blacher, S., Lodewyckx, P., & Léonard, A. (September 2006). Adsorption dynamics of CCl4 vapours on activated carbon by image analysis of high-resolution x-ray microtomograms. Paper presented at XXXI Reunion Iberica de Adsorcion, Tarragona, Spain.

Lecocq, R., Léonard, A., Toye, D., Crine, M., & Marchot, P. (September 2006). Simulation of transport processes in fiber filters: Combining a lattice Boltzmann CFD method and a particle tracking method. Poster session presented at µTomo3D, BVM/SBM Symposium on Electron/X-ray Tomography and 3D Image Processing, Leuven, Belgium.

Léonard, A., Blacher, S., Lodewyckx, P., & Crine, M. (September 2006). Various applications of X-ray microtomography in chemical engineering. Paper presented at "µTomo3D, BVM/SBM Symposium on Electron/X-ray Tomography and 3D Image Processing, Leuven, Belgium.

Léonard, A., Blacher, S., Marchot, P., Crine, M., & Lodewyckx, P. (2006). Study of organic and water vapours adsorption on carbon filters by X-ray microtomography. In Fourth International Symposium on Process Tomography in Poland, 2006, Varsóvia. Varsovia, Poland: Warsaw University of Technology.

Léonard, A., Marchot, P., Pirard, J.-P., Crine, M., & Blacher, S. (September 2006). Use of x-ray microtomography coupled to image analysis for cracks detection and quantification. Poster session presented at IAMG’2006 Annual Conference, Liège, Belgium.

Léonard, A., Crine, M., & Jomaa, W. (2006). Modelling of the convective drying of resorcinol-formaldehyde resins: influence of the drying conditions on the induces stress tensor. In I. Farkas (Ed.), Drying 2006, the Proceedings of the 15th International Drying Symposium,Budapest, Hungary, 20-23 August 2006, Vol. A (pp. 273-278). Gödöllö, Hungary: Szent Istvan University Publisher.

Léonard, A., Meneses, E., Le Trong, E., Salmon, T., Toye, D., & Crine, M. (2006). Use of X-ray tomography to study the influence of back mixing on the convective drying of sludges in a fixed bed. In I. Farkas (Ed.), Drying 2006, the Proceedings of the 15th International Drying Symposium, Budapest, Hungary, 20-23 August 2006, Vol B (pp. 767-772). Gödöllö, Hungary: Szent Istvan University Publisher.

Léonard, A., Crine, M., & Jomaa, W. (2006). Thermo-hygro-mechanical modelling of the convective drying of resorcinol-formaldehyde xerogel monoliths. In Proceedings of Carbon 2006.

Lodewyckx, P., Wullens, H., Léonard, A., Blacher, S., Ribeiro, A. M., & Loureiro, J. M. (2006). Study of the dynamics of water adsorption on activated carbon by a combination of high resolution x-ray microtomography and breakthrough measurements. In Proceedings of Carbon 2006.

Toye, D., Marchot, Léonard, A., & Crine, M. (17 May 2006). Techniques tomographiques : des instruments de mesure de choix en génie chimique. Paper presented at Journée « Tomographie », Liège, Belgium.

Alié, C., Ferauche, F., Léonard, A., Lambert, S., Tcherkassova, N., Heinrichs, B., Crine, M., Marchot, P., Loukine, E., & Pirard, J.-P. (15 March 2006). Pd-Ag/SiO2 xerogel catalyst forming by impregnation on alumina foams. Chemical Engineering Journal, 117 (1), 13-22. doi:10.1016/j.cej.2005.11.011

Toye, D., Fransolet, E., Léonard, A., Crine, M., & Marchot, P. (14 March 2006). Techniques tomographiques : des outils de choix pour l’étude des réacteurs polyphasiques. Paper presented at Journée thématique « Les avancées des métrologies pour les réacteurs polyphasiques », Paris, France.

Blacher, S., Gommes, C., Léonard, A., Calberg, C., & Pirard, J.-P. (February 2006). Caractérisation de matériaux poreux par analyse d'images 3D. Paper presented at 29ème journée ISS (International Stereology Society), Paris, France.

Blacher, S., Calberg, C., Kerckhofs, G., Léonard, A., & Wevers, M. (2006). The porous structure of biodegradable scaffolds obtained with supercritical CO2 as foaming agent. Studies in Surface Science and Catalysis, 160, 681-688.

Blacher, S., Calberg, C., Kerckhofs, G., Léonard, A., Wevers, M., Jérôme, R., & Pirard, J.-P. (2006). The porous structure of biodegradable scaffolds obtained with supercritical CO(2) as foaming agent. Studies in Surface Science and Catalysis, 160, 681-688.

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Élimination des limitations de transfert de matière en catalyse supportée sur carbone par utilisation de supports de type xérogel de carbone. Paper presented at Journées Scientifiques du GFEC (Groupe Français d’Études des Carbones), Presqu’île de Giens, France.

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Avoiding mass transfer limitations in carbon supported catalysis by using carbon xerogel type supports. Paper presented at Second International Symposium on Carbon for Catalysis - CarboCat-II, St. Petersburg, Russia.

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Avoiding mass transfer limitations in carbon supported catalysis by using carbon xerogel as supports. Chemistry for Sustainable Development, 14, 571-575.

Job, N., Léonard, A., Colomer, J.-F., Pirard, R., Heinrichs, B., Marien, J., Crine, M., & Pirard, J.-P. (2006). Metal catalysts suppported on texture-tailored carbon xerogels. Studies in Surface Science and Catalysis, 162, 111-118.

Job, N., Léonard, A., Pirard, R., Heinrichs, B., Crine, M., & Pirard, J.-P. (2006). Metal catalysts supported on texture tailored carbon xerogels. Paper presented at 9th International Symposium - Scientific Bases for the Preparation of Heterogeneous Catalysts, Louvain-la-Neuve, Belgium.

Job, N., Panariello, F., Marien, J., Crine, M., Pirard, J.-P., & Léonard, A. (01 January 2006). Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol-formaldehyde gels. Journal of Non-Crystalline Solids, 352 (1), 24-34. doi:10.1016/j.jnoncrysol.2005.11.024

Lodewyckx, P., Blacher, S., & Léonard, A. (January 2006). Use of x-ray microtomography to visualise dynamic adsorption of organic vapour and water vapour on activated carbon. Adsorption, 12 (1), 19-26. doi:10.1007/s10450-006-0135-2

Blacher, S., Kerckhofs, G., Calberg, C., Léonard, A., Wevers, M., Pirard, J.-P., & Germain, A. (October 2005). X-ray microtomography coupled with image analysis: a useful tool or 3D characterization of polymer foams. Paper presented at Imageries et polymères, Bordeaux, France.

Lecocq, R., Toye, D., Maquet, V., Léonard, A., Marchot, P., Jérôme, R., & Crine, M. (October 2005). Étude de la texture poreuse d'un matériau polymère cellulaire utilisé en ingénierie tissulaire par microtomographie à rayons X. Poster session presented at 7èmes Journées d'Etude sur les Milieux Poreux ­ JEMP2005, Bordeaux, France.

Lecocq, R., Toye, D., Maquet, V., Léonard, A., Marchot, P., Jérôme, R., & Crine, M. (October 2005). Analyse quantitative de la texture poreuse d'un matériau polymère cellulaire basée sur des images de microtomographie à rayons X. Poster session presented at Imageries et polymères, Bordeaux, France.

Léonard, A., Job, N., Jomaa, W., Pirard, J.-P., Crine, M., & Puiggali, J.-R. (2005). Production de xérogels de carbone hyperporeux par séchage convectif. In C. Azzaro-Pantel, J. Bertrand, M. Cabassub, C. Frances, M. Poux, H. Roux-De Balmann, ... C. Xuereb (Eds.), Récents progrès en génie des procédés N° 92: 10ème Congrès de la SFGP, Toulouse 2005. Le génie des procédés vers de nouveaux espaces. Paris, France: Lavoisier Technique et Documentation.

Léonard, A., Sabatier, F., Job, N., Pirard, J.-P., & Crine, M. (October 2005). Towards the production of carbon xerogel monoliths by optimizing convective drying conditions. Poster session presented at 1st International Conference on Carbon for Energy Storage and Environment Protection - CESEP'05, Orléans, France.

Lodewyckx, P., Léonard, A., & Blacher, S. (October 2005). High-resolution X-ray microtomography to determine the kinetics of water vapour adsorption. Paper presented at 1st International Conference on Carbon for Energy Storage and Environment Protection - CESEP'05, Orléans, France.

Léonard, A., Job, N., Jomaa, W., Pirard, J.-P., Crine, M., & Puiggali, J.-R. (20 September 2005). Production de xérogels de carbone hyperporeux par séchage convectif. Poster session presented at 10ème Congrès de la Société Française de Génie des Procédés, Toulouse, France.

Léonard, A., Blacher, S., Guiot, L., Balligand, M., Pirard, J.-P., & Crine, M. (September 2005). Texture characterisation of ultramacroporous materials using x-ray microtomography: application to alumina foams and deer antlers. Paper presented at Skyscan user meeting, Edegem, Belgium.

Léonard, A., Job, N., Blacher, S., Pirard, J.-P., Crine, M., & Jomaa, W. (July 2005). Suitability of convective air drying for the production of porous resorcinol-formaldehyde and carbon xerogels. Carbon, 43 (8), 1808-1811. doi:10.1016/j.carbon.2005.02.016

Léonard, A., Job, N., Jomaa, W., Pirard, J.-P., Crine, M., & Puiggali, J.-R. (July 2005). Textural comparison of resorcinol-formaldehyde xerogels obtained by vacuum drying and convective drying. Poster session presented at 7th World Congress and 5th European Congress of Chemical Engineering, Glasgow, United Kingdom.

Lodewyckx, P., Léonard, A., & Blacher, S. (2005). The use of tomography to determine the kinetics of water vapour adsorption. In Proceedings of Carbon 2005 – The International Carbon Conference.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (June 2005). Image analysis of X-ray microtomograms of soft materials during convective drying: 3D measurements. Journal of Microscopy, 218 (Pt 3), 247-252. doi:10.1111/j.1365-2818.2005.01485.x

Blacher, S., Calberg, C., Kerckhofs, G., Léonard, A., Wevers, M., Jérôme, R., & Pirard, J.-P. (May 2005). The porous structure of biodegradable scaffolds obtained with supercritical CO2 as foaming agent. Poster session presented at 7th International Symposium on the Characterization of Porous Solids (COPS-VII), Aix-en-Provence, France.

Léonard, A., Jomaa, W., & Crine, M. (2005). Production of resorcinol formaldehyde xerogels by convective drying. In Proceedings of the joint conference of AFSIA (Association Française pour le Séchage dans l’Industrie et l’Agriculture) and Working group on Drying of EFCE at INA P-G, Paris, 12th and 13th May, 2005 (pp. 116-117). AFSIA.

Léonard, A., Meneses, E., Salmon, T., & Crine, M. (2005). Effect of back mixing during convective drying of wastewater sludges. In Proceeedings of the joint of AFSIA (Association Française de Séchage dans l'Industrie et l'Agriculture) and Working group on Drying of EFCE at INA P-G, Paris, 12th and 13th May, 2005 (pp. 82-83). AFSIA.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (February 2005). Moisture profiles determination during convective drying using x-ray microtomography. Canadian Journal of Chemical Engineering, 83 (1), 127-131. doi:10.1002/cjce.5450830121

Blacher, S., Kerckhofs, G., Caliberg, C., Léonard, A., Wevers, M., Pirard, J.-P., & Germain, A. (2005). X-ray microtomography coupled with image analysis: a useful tool for 3D characterization of polymer foams. In Proceedings of Imageries et polymères 2005.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2005). Convective drying of wastewater sludges: Influence of air temperature, superficial velocity, and humidity on the kinetics. Drying Technology, 23 (8), 1667-1679. doi:10.1081/DRT-200065082

Léonard, A., Vandevenne, P., Salmon, T., Marchot, P., & Crine, M. (September 2004). Wastewater sludge convective drying: Influence of sludge origin. Environmental Technology, 25 (9), 1051-1057. doi:10.1080/09593330.2004.9619398

Toye, D., Fransolet, E., Léonard, A., Crine, M., & Marchot, P. (August 2004). Computed Tomography at the University of Liège – Chemical Engineering Laboratory. Paper presented at Seminar on Tomography, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Image reconstruction in X-ray tomography. Paper presented at Seminar on Tomography, Bangi, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Electrical tomography investigation in bubble columns. Paper presented at Seminar on Tomography, Bangi, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Computed X-ray tomography investigations in packed beds. Paper presented at Seminar on Tomography, Bangi, Kajang, Malaysia.

Blacher, S., Léonard, A., Heinrichs, B., Tcherkassova, N., Ferauche, F., Crine, M., Marchot, P., Loukine, E., & Pirard, J.-P. (14 July 2004). Image analysis of X-ray microtomograms of Pd-Ag/SiO2 xerogel catalysts supported on Al2O3 foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 241 (1-mars Sp. Iss. SI), 201-206. doi:10.1016/j.colsurfa.2004.04.006

Blacher, S., Stassin, F., Léonard, A., Pirard, R., Crine, M., Jérôme, R., & Pirard, J.-P. (May 2004). Texture characterisation of foams based on poly(e-caprolactone) - clay nanocomposites by image analysis of X-ray microtomography and mercury porosimetry. Paper presented at 8th International Conference on Fundamentals of Adsorption, Sedona, United States - Arizona.

Léonard, A., Blacher, S., & Crine, M. (March 2004). Apports de la microtomographie à rayons X pour l'étude du séchage convectif de matériaux déformables : suivi du retrait, de la fissuration et des profils d'humidité interne. Paper presented at Séminaire donné au "Laboratoire interétablissements TREFLE, Site ENSAM, UMR 8508 du CNRS", Bordeaux, France.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (March 2004). Comparison of drying behaviours and rheological properties of two mechanically dewatered residual sludges. Paper presented at Meeting of the EFCE Working Party on Drying, Nuremberg, Germany.

Léonard, A. (2004). Study of convective drying of wastewater sludges - Texture follow-up by X-ray microtomography - Thesis presented on the 7th February 2003-University of Liege, Belgium. Drying Technology, 22 (1-2), 417-419. doi:10.1081/DRT-120028271

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2004). Measurement of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Drying Technology, 22 (7), 1695-1708. doi:10.1081/DRT-200025629

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (November 2003). Image analysis of X-ray microtomograms of soft materials during convective drying. Journal of Microscopy, 212 (Pt 2), 197-204. doi:10.1046/j.1365-2818.2003.01242.x

Blacher, S., Léonard, A., & Gommes, C. (October 2003). Image analysis activities of the Department of Applied Chemistry of University of Liège. Paper presented at Séminaire donné au "Department of Inorganic Chemistry and Catalysis", Utrecht University, Utrecht, Netherlands.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (October 2003). 3D image analysis characterization of wastewater sludge extrudates submitted to convective drying. Paper presented at First International Meeting on Applied Physics - Aphys2003, Badajoz, Spain.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Use of X-ray microtomography to determine internal moisture profiles during convective drying of deformable materials. In G. Saravacos, Z. B. Maroulis, M. Krokida, ... V. T. Karathanos (Eds.), Proceedings of the European Drying Symposium - EuDrying03 (pp. 31-39).

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (September 2003). Non destructive measurement of shrinkage, cracks and moisture profiles by X-ray microtomography : application to wastewater sludge convective drying. Paper presented at Séminaire donné à l'Institute of Agrophysics, Polish Academy of Sciences, Lublin, Poland.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Moisture profiles determination during convective drying using X-ray microtomography. In Proceedings of the 3rd World Congress on Industrial Process Tomography, Banff, Canada (pp. 730-735). International Society for Industrial Process Tomography.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Convective drying of wastewater sludges: Influence of air temperature, superficial velocity and humidity on the kinetics. In Z. Pakowski (Ed.), X Drying Symposium, Lodz, 17-19 September 2003. Lodz, Poland: Politechnika Lodzla.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (September 2003). Application of X-ray microtomography to follow cracks development during convective drying of deformable materials. Poster session presented at 4th European Congress of Chemical Engineering - ECCE4, Grenade, Spain.

Crine, M., & Léonard, A. (April 2003). Les technologies du séchage de boues de station d'épuration. Paper presented at Séminaire DGTRE : L'utilisation rationnelle de l'énergie dans les technologies de séchage, Warcoing, Belgium.

Léonard, A. (2003). Étude du séchage convectif de boues de station d'épuration - Suivi de la texture par microtomographie à rayons X. Unpublished doctoral thesis, ULiège - Université de Liège.
Jury: Crine, M. (Promotor), L'Homme, G., Marchot, P., Pirard, J.-P., Blacher, S., Lannoy, F., Vanderschuren, J., Lecomte, D., ... Roques, M.

Blacher, S., Léonard, A., Tcherkassova, N., Ferauche, F., Heinrichs, B., Crine, M., Marchot, P., & Pirard, J.-P. (2003). Image analysis of X-ray microtomograms of Pd-Ag/SiO2 xerogel catalysts supported on Al2O3 foams. Poster session presented at Third International Workshop on Characterization of Porous Materials: from Angstroms to Millimeters, Princeton, New Jersey, United States.

Léonard, A., Blacher, S., Pirard, R., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Multiscale texture characterization of wastewater sludges dried in a convective rig. Drying Technology, 21 (8), 1507-1526. doi:10.1081/DRT-120024490

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (August 2002). 3D imaging of the texture evolution during convective drying of soft shrinkable materials. Poster session presented at CHISA 2002, 15th International Congress of Chemical and Process Engineering, Prague, Czechia.

Blacher, S., Maquet, V., Léonard, A., Chapelle, G., Crine, M., Jérôme, R., & Pirard, J.-P. (May 2002). Texture characterisation of ultramacroporous materials using non-destructive methods. Paper presented at 6th International Symposium on the Characterization of Porous Solids, Alicante, Spain.

Blacher, S., Maquet, V., Léonard, A., Chapelle, G., Crine, M., Jérôme, R., & Pirard, J.-P. (2002). Texture characterization of ultramacroporous materials using non-destructive methods. Studies in Surface Science and Catalysis, 158, 331-338. doi:10.1016/s0167-2991(02)80152-5

Léonard, A., Blacher, S., & Crine, M. (2002). Evolution de la texture d'un extrudat de boue au cours d'un séchage convectif. In Compte rendu des 20èmes journées de l'AFSIA. Formulation - Mise en oeuvre - Séchage des solides fins (pp. 137-146). AFSIA.

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2002). Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. Drying Technology, 20 (4-5), 1053-1069. doi:10.1081/DRT-120004013

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). Suivi du procédé de séchage thermique de boues d'épuration par microtomographie aux rayons X. In A. Latifi, J. Boudrant, ... J. Tonde (Eds.), Récents progrès en génie des procédés N°82 Vol.15 2001 : information, modélisation, simulation et optimisation (pp. 465-472). Paris, France: Lavoisier Technique et Documentation.

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. In Proceedings of the 6th World Congress of Chemical Engineering.

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). X-ray microtomography : a new tool to follow soft material shrinkage during convective drying. In Proceedings of the 2nd World Congress on Industrial Process Tomography, Hannover, Germany, Aug 29-31, 2001 (pp. 110-117).

Léonard, A., Blacher, S., & Crine, M. (2001). Étude par microtomographie aux rayons X du retrait associé au séchage convectif d'une boue. In J. Boudrant & M.-N. Pons (Eds.), Récents progrès en génie des procédés N°78 Vol.15 2001 : visualisation, image, modélisation (pp. 89-94). Paris, France: Lavoisier Technique et Documentation.

Léonard, A., & Crine, M. (2000). Relation between convective drying kinetics and shrinkage of wastewater treatment sludges. In P. J. A. M. Kerkhof, W. J. Coumans, ... G. D. Mooiweer (Eds.), Proceedings of the 12th International Drying Symposium, Ids2000, Noordwijkerhout, the Netherlands, 28-31, August 2000 (CD-ROM). Elsevier Science Ltd.

Léonard, A., & Crine, M. (13 June 2000). Relation entre cinétique et retrait lors du séchage de boues de station d'épuration. Poster session presented at Happy Hours de la B-IWA (Belgian International Water Association), Bruxelles, Belgium.

Léonard, A., & Crine, M. (2000). Relation entre cinétique et retrait lors du séchage de boues de station d'épuration. Paper presented at Journées De Rencontre Des Jeunes Chimistes, Borzée, Belgium.

Léonard, A., Salmon, T., Janssens, & Crine, M. (1999). Kinetics modelling of convective heat drying of wastewater treatment sludge. In G. Flamand (Ed.), Récents progrés en génie des procédés vol.13 n.68 : separations. ECCE 2 conference Montpellier 5/7.10.99 (pp. 129-136). Paris, France: Lavoisier Technique et Documentation.

Léonard, A. (1998). Étude d'une unité industrielle de séchage de boues de station d'épuration. Unpublished master thesis, ULiège - Université de Liège.
Jury: Crine, M. (Promotor), Germain, A., Lannoy, F., Pirard, J.-P., ... Bourges, P.-A.