Publications and communications of Mertens, Anne

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (28 February 2022). Adaptive time stepping approach for Phase-Field modeling of phase separation and precipitates coarsening in additive manufacturing alloys. Paper presented at COMPLAS 2021 - XVI International Conference on Computational Plasticity, Barcelone, Spain. doi:10.23967/complas.2021.009

Fetni, S., Delahaye, J., Mertens, A., & Habraken, A. (13 December 2021). About the use of Phase Field and FE to predict micostructures, Application on AlSi10Mg samples produced by Additive Manufacturing. Paper presented at Premier séminaire de la GE@2M (Fédération Grand Est Mécanique des Matériaux France), Virtuel (Région du Grand Est), France.

Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Tchuindjang, J. T., & Mertens, A. (29 October 2021). On the influence of the Counter-body Material on the Wear Rate of 316L+WC Composite Coatings processed by Laser Cladding. Paper presented at EDT-MAIN PhD Scientific Day / NanoWal Annual Meeting, Bruxelles, Belgium.

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (07 September 2021). Presentation: Adaptive time stepping approach for Phase-F1ield modeling of phase separation and precipitates coarsening in additive manufacturing alloys. Paper presented at COMPLAS 2021, Barcelona, Spain.

Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (03 June 2021). How finite element simulations and phase field method interact to predict material properties of additive manufacturing samples. Paper presented at Sixth International Conference on Research in Intelligent Computing in Engineering (RICE-2021), Online, Vietnam.

Maurizi-Enrici, T., Dedry, O., Mario, D., Nordera, M., Castagne, S., Tchuindjang, J. T., & Mertens, A. (June 2021). Wear behavior of laser clad 316L+WC composite coatings. Paper presented at Thermec 2020 - 11th International Conference on Processing & Manufacturing of Advanced Materials, Vienne (modifié en mode virtuel - covid 19), Austria.

Tchuindjang, J. T., Paydas, H., Tran, H. S., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (31 May 2021). A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition. Materials, 14 (11), 2985. doi:10.3390/ma14112985

Delahaye, J., Mertens, A., & Habraken, A. (21 April 2021). Investigation of out-of-equilibrium thermo-physical properties of AlSi10Mg processed by LPBF through modeling and experiment. Paper presented at ESAFORM 2021 - 24th International Conference on Material Forming, Liège, Belgium.

Mertens, A. (13 April 2021). Additive Manufacturing : From experiments to models (Introduction and experimental aspects). Paper presented at Esaform 2021: 24th international conference on material forming - Pre-conference course, Liège (en mode virtuel - covid 19), Belgium.

Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Mario, D., Serrano Martin, I., Tchuindjang, J. T., & Mertens, A. (April 2021). The role of the Counterbody Material on Tribological Properties of 316L+WC Composite Coatings processed by Laser Cladding. Poster session presented at 23rd International Conference on Wear of Materials (WOM 2021).

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Duchene, L., Mertens, A., & Habraken, A. (17 March 2021). Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design, 204 (109661). doi:10.1016/j.matdes.2021.109661

Dedry, O., Bouffioux, C., Tran, H. S., Santos Macías, J. G., Habraken, A., & Mertens, A. (2021). Identification of AlSi10Mg matrix behavior by nanoindentation. In 24th International Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2464

Dedry, O., Delahaye, J., Vertruyen, B., Habraken, A., Tchuindjang, J. T., & Mertens, A. (2021). Thermal and microstructural characterizations of AlSi10Mg samples processed by Selective Laser Melting using two different preheating temperatures. Paper presented at Thermec 2021.

Mertens, A. (2021). Chapter 13 Metal matrix composites processed by laser additive manufacturing: microstructure and properties. In A. Riveiro, J. Pou, & J. P. Davim (Eds.), Handbook in Advanced Manufacturing - Additive manufacturing (pp. 409-425). Cambridge, United States - Massachusetts: Elsevier.

Tchuindjang, J. T., Dedry, O., Paydas, H., Jardin, R. T., Carrus, R., Habraken, A., & Mertens, A. (2021). Micromechanical assessment and thermophysical characterization of HSS M4 deposits processed by Laser Metal Deposition, - a prerequisite to the validation of a thermomechanical model. Paper presented at Thermec 2021.

Jardin Tome, R., Tuninetti, V., Tchuindjang, J. T., Hashemi, S. N., Carrus, R., Mertens, A., Duchene, L., Tran, H. S., & Habraken, A. (22 November 2020). Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals, 10 (2020), 1554. doi:10.3390/met10111554

Delahaye, J., Vertruyen, B., Mertens, A., & Habraken, A. (28 October 2020). Phase-Field Simulations of Coarsening Kinetics of Si Precipitates in AlSi10Mg Processed by Selective Laser Melting. Paper presented at 17th International Conference on Aluminium Alloys, Grenoble, France.

Ertugrul, O., Maurizi-Enrici, T., Paydas, H., Saggionetto, E., Boschini, F., & Mertens, A. (20 September 2020). Laser cladding of TiC reinforced 316L stainless steel composites: Feedstock powder preparation and microstructural evaluation. Powder Technology, 375, 384-396. doi:10.1016/j.powtec.2020.07.100

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Jardin, R., Duchene, L., Mertens, A., & Habraken, A. (September 2020). 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing, 50 (86-92). doi:10.1016/j.promfg.2020.08.016

Maurizi-Enrici, T., Dedry, O., Boschini, F., Tchuindjang, J. T., & Mertens, A. (2020). Microstructural and Thermal Characterization of 316L+WC Composite Coatings obtained by Laser Cladding. Advanced Engineering Materials. doi:10.1002/adem.202000291

Mertens, A., Delahaye, J., Dedry, O., Vertruyen, B., Tchuindjang, J. T., & Habraken, A. (26 April 2020). Microstructure and properties of SLM AlSi10Mg: Understanding the influence of the local thermal history. Procedia Manufacturing, 47, 1089-1095. doi:10.1016/j.promfg.2020.04.121

Zorzetto, L., Andena, L., Briatico-Vangosa, F., De Noni, L., Thomassin, J.-M., Jérôme, C., Grossman, Q., Mertens, A., Weinkamer, R., Rink, M., & Ruffoni, D. (2020). Properties and role of interfaces in multimaterial 3D printed composites. Scientific Reports, 10 (1), 22285. doi:10.1038/s41598-020-79230-0

Habraken, A., Mertens, A., Duchene, L., Tchuindjang, J. T., Tran, H. S., Tomé Jardin, R. A., Delahaye, J., Dedry, O., Paydas, H., & Carrus, R. (06 December 2019). Microstructure prediction in additive manufacturing(TA6V, AlSi10Mg, AISI M4 materials). Paper presented at Séminaire mensuel Integrative Systems+Design Division, Ann Arbor, United States - Michigan.

Maurizi-Enrici, T., Mertens, A., Sinnaeve, M., & Tchuindjang, J. T. (04 December 2019). Elucidation of the solidification sequence of a complex graphitic HSS alloy under a combined approach of DTA and EBSD analyses. Journal of Thermal Analysis and Calorimetry, 1 (15). doi:10.1007/s10973-019-09093-9

Maurizi-Enrici, T., Mario, D., Mancini, E., Dedry, O., Tchuindjang, J. T., & Mertens, A. (05 September 2019). Stainless steel 316L + WC composite coating produced by laser cladding: on the role of particles dissolution and interfacial reactions. Paper presented at Euromat 2019, Stockholm, Sweden.

Reginster, S., Garray, D., & Mertens, A. (03 September 2019). Comparison of Carbon fibers reinforced Magnesium matrix composites realized by liquid immersion with C-Al and C-Ni pre-treated yarns. Paper presented at Euromat 2019, Stockholm, Sweden.

Delahaye, J., Tchuindjang, J. T., Lecomte-Beckers, J., Rigo, O., Habraken, A., & Mertens, A. (15 August 2019). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Acta Materialia, 175, 160-170. doi:10.1016/j.actamat.2019.06.013

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Mertens, A., Habraken, A., & Tran, H. S. (2019). Numerical analysis of thermal stress in laser cladding technology of M4 High Speed Steel. In Y. Korkolis, B. Kinsey, M. Knezevic, & Padhye, Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes.

Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., & Mertens, A. (14 June 2019). Micro-mechanical properties of the alpha’ martensite phase occurring in a Ti-6Al-4V alloy after various processing routes, including Laser Metal Deposition. Paper presented at The 14th World Conference on Titanium, Nantes, France.

Maurizi-Enrici, T., Mario, D., Dedry, O., Tchuindjang, J. T., & Mertens, A. (28 May 2019). Recent advances on 316L+WC Composite Coatings Processed by Laser Cladding. Paper presented at Workshop on Metal AM in Leuven2019, Leuven, Belgium.

Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., Habraken, A., & Mertens, A. (28 May 2019). Influence of Processing Routes on the Micro-mechanical behavior of alpha’-martensite in Ti-6Al-4V alloy. Paper presented at 4th Workshop on Metal Additive Manufacturing, Leuven, Belgium.

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Pesci, R., Mertens, A., Habraken, A., & Tran, H. S. (27 May 2019). Thermo-Mechanical laser cladding simulations of M4 High Speed Steel. Paper presented at 4th workshop of Metal Additive Manufacturing, Leuven, Belgium.

Maurizi-Enrici, T., Tchuindjang, J. T., Dedry, O., Mario, D., & Mertens, A. (09 April 2019). Fabrication and improvement of 316L+WC composite coatings processed by Laser Cladding. Paper presented at SAMPE Benelux 2019, Marknesse, Netherlands.

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (01 February 2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45. doi:10.1016/j.matlet.2018.09.157

Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (10 December 2018). Assessment of Si precipitate contribution to SEM-EDS analysis in an Al/Si alloy through Monte Carlo simulation performed by DTSAII freeware. Paper presented at CAREM user’s day.

Dedry, O., Hashemi, S. N., Mertens, A., & Tchuindjang, J. T. (December 2018). Characterization of Microstructure in a HSS Alloy processed by Laser Metal Deposition through EBSD Analysis and Nanoindentation Tests. Paper presented at Séminaire des utilisateurs des microscopes de la CAREM.

Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (13 September 2018). Segregation network structure investigation on 316L stainless steel processed by Laser Cladding. Paper presented at INDENTATION2018.

Dedry, O., Hashemi, S. N., Carrus, R., Cayron, C., Mertens, A., & Tchuindjang, J. T. (September 2018). Microstructural and micromechanical characterization of a HSS alloy processed by Laser Metal Deposition: comparison of the matrix within the melt pool and the heat affected zone. Paper presented at 6th edition of the symposium Indentation 2018.

Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (September 2018). Dominant strengthening mechanism of AlSi10Mg processed by Selective Laser Melting. Poster session presented at Colloque Indentation 2018, Liège, Belgium.

Sartori, S., Pezzato, L., Dabalà, M., Maurizi-Enrici, T., Mertens, A., Ghiotti, A., & Bruschi, S. (September 2018). Surface integrity analysis of Ti6Al4V after semi-finishing turning under different low-temperature cooling strategies. Journal of Materials Engineering and Performance, 27 (9), 4810-4818. doi:10.1007/s11665-018-3598-x

Simar, A., Mertens, A., Ryelandt, S., Delannay, F., & Brassart, L. (13 July 2018). Interfacial fibre decohesion in Friction Stir Processed Mg-C composites under tensile and compression loading. Paper presented at Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France.

Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Lecomte-Beckers, J., Carrus, R., Habraken, A., & Mertens, A. (12 July 2018). High Temperature Wear Behaviour of High Speed Steel Thick Deposits Obtained by Laser Cladding. Paper presented at Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France.

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Mertens, A., & Habraken, A. (12 July 2018). Modelling the Laser Cladding Process of M4 High Speed Steel. Paper presented at International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Paris, France.

Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (July 2018). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties. Paper presented at THERMEC’2018 - INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS.

Tchuindjang, J. T., Esteva, H., Tran, H. S., Paydas, H., Maurizi-Enrici, T., Delahaye, J., Mertens, A., & Habraken, A. (27 June 2018). 3D Thermal simulation in Additive Manufacturing processes with microstructure validation to help developing new thermo-metallurgical models: case study with Direct Metal Deposition of Ti6Al4V. Paper presented at MatX 2018 - International Conference on Material Innovation, Nuremberg, Germany.

Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (28 May 2018). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties. Paper presented at Workshop on Metal Additive Manufacturing, Liège, Belgium.

Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (28 May 2018). Microstructural and Thermal Characterization of 316L+WC Composite Coatings by Laser Cladding. Poster session presented at 3rd  Workshop  on  Metal  Additive  Manufacturing, Liège, Belgium.

Paydas, H., Tran, H. S., Carrus, R., Habraken, A., Mertens, A., & Tchuindjang, J. T. (28 May 2018). Investigation into the occurrence of recrystallization during the additive manufacturing of a thick Ti6Al4V deposit. Poster session presented at 3rd Workshop on Additive Manufacturing of Metals, Liège, Belgium.

Tomé Jardin, R. A., Hashemi, S. N., Tran, H. S., Mertens, A., & Habraken, A. (28 May 2018). Sensitivity analysis of melt pool - Finite Element prediction in laser cladding process of HSS material. Paper presented at 3rd Workshop on Metal AM, Liège, Belgium.

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (25 April 2018). 2D FE Simulations of High Speed Steel Laser Cladding Process. Paper presented at ESAFORM, Palermo, Italy.

Simar, A., Mertens, A., Ryelandt, S., Delannay, F., & Brassart, L. (18 April 2018). Mean-Field Model Analysis of Deformation and Damage in Friction Stir Processed Mg-C Composites. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 723, 324-333. doi:10.1016/j.msea.2018.03.043

Maurizi-Enrici, T., Mancini, E., Mertens, A., Tchuindjang, J. T. (Other coll.), & Magnien, J. (Other coll.). (28 March 2018). Microstructure and Nano-Hardness in 316L+WC Composite Coatings Processed by Laser Cladding. Paper presented at 16th European Mechanics of Materials Conference, Nantes, France.

Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (28 March 2018). Influence of the local thermal history and microstructure on the wear behaviour of laser clad high speed steel thick coatings. Paper presented at 16th European Mechanics of Materials Conference, Nantes, France.

Tran, H. S., Tchuindjang, J. T., Paydas, H., Tomé Jardin, R. A., Carrus, R., Mertens, A., & Habraken, A. (28 March 2018). Predicted microstructure in repair technology of Ti-6Al-4V. Paper presented at 16th edition of the European Mechanics of Material Conference, Nantes, France.

Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (04 January 2018). Laser Clad High Speed Steel thick deposits: Correlations between the local thermal history, the microstructures and the wear mechanisms. Paper presented at International Conference on Plasticity, Damage and Fracture 2018, San Juan, Puerto Rico.

Mertens, A. (2017). Laser Cladding of High Speed Steel Deposits : Thermal history - Microstructure - Wear Behaviour. (Université catholique de Louvain - Ecole Polytechnique de Louvain, LMECA2453 - Advanced manufacturing technologies (Prof. A. Simar)).

Delahaye, J., Mertens, A., Dedry, O., Rigo, O., Vertruyen, B., Lecomte-Beckers, J., & Habraken, A. (21 September 2017). Effect of solution treatment on the fracture mechanisms of AlSi10Mg parts produced by Selective Laser Melting. Poster session presented at European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), Thessaloniki, Greece.

Montrieux, H.-M., Lecomte-Beckers, J., Halleux, J., & Mertens, A. (07 September 2017). Validation of a TEOS based sol-gel coating for the protection of carbon fibres against oxidation regarding their use in metal matrix composites. Poster session presented at 19th International Sol-Gel Conference, Liège, Belgium.

Mertens, A., Delahaye, J., & Lecomte-Beckers, J. (29 August 2017). Fusion-based Additive Manufacturing for Processing Aluminum Alloys: State-of-the-Art and Challenges. Advanced Engineering Materials, 19 (8), 1700003. doi:10.1002/adem.201700003

Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (15 August 2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142. doi:10.1016/j.matdes.2017.04.092

Mertens, A., Storti, M., Simar, A., Dedry, O., Montrieux, H.-M., & Lecomte-Beckers, J. (10 July 2017). Thermal treatments for tailoring the microstructure and wear behaviour of friction stir processed Aluminium-C fibres composites. Paper presented at International Conference on Frontiers in Materials Processing, Applications, Research & technology, Bordeaux, France.

Bister, G., Hautcoeur, D., Deschuyteneer, D., Nyssen, P., Cambier, M., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (July 2017). Functional refractory molds for metal casting built by additive manufacturing. Paper presented at ECerS2017 - 15th conference and exhibition of the European Ceramic Society, Budapest, Hungary.

Delahaye, J., Rigo, O., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (28 June 2017). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgium.

Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Carrus, R., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (28 June 2017). Wear behaviour of laser clad High Speed Steels thick deposits. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgium.

Tomé Jardin, R. A., Tchuindjang, J. T., Paydas, H., Carrus, R., Mertens, A., Lecomte-Beckers, J., Habraken, A., & Tran, H. S. (28 June 2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. Paper presented at Workshop on metal additive manufacturing, Louvain-la-Neuve, Belgium.

Hashemi, S. N., Mertens, A., Montrieux, H.-M., Tchuindjang, J. T., Dedry, O., Carrus, R., & Lecomte-Beckers, J. (15 April 2017). Oxidative wear behaviour of laser clad high speed steel thick deposits: influence of sliding speed, carbide type and morphology. Surface and Coatings Technology, 315, 519-529. doi:10.1016/j.surfcoat.2017.02.071

Simar, A., Ryelandt, S., Delannay, F., Mertens, A., Lecomte-Beckers, J., & Brassart, L. (28 February 2017). Micro-mechanical testing of magnesium based composites reinforced by carbon fibers manufactured by friction stir processing. Paper presented at TMS 2017 146th Annual Meeting and Exhibition, San Diego (CA), United States.

Mertens, A., L'Hoest, T., Magnien, J., Carrus, R., & Lecomte-Beckers, J. (2017). On the Elaboration of Metal-Ceramic Composite Coatings by Laser Cladding. Materials Science Forum, 879, 1288-1293. doi:10.4028/www.scientific.net/MSF.879.1288

Mertens, A. (2016). Additive Manufacturing of Metallic Materials: An Introduction.

Mertens, A. (2016). Laser Additive Manufacturing of Metal Matrix Composites. (Université catholique de Louvain - Ecole Polytechnique de Louvain, LMECA2453 - Advanced manufacturing technologies (Prof. A. Simar)).

Mertens, A., Paydas, H., Rigo, O., Carrus, R., & Lecomte-Beckers, J. (05 August 2016). On the effect of microstructural anisotropy on the mechanical and thermophysical properties of Ti6Al4V processed by Laser Beam Melting. Paper presented at The 9th Pacific Rim International Conference on Advaced Materials and Processing (PRICM9), Kyoto, Japan.

Bister, G., Hautcoeur, D., Deschuyteneer, D., Nyssen, P., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (19 July 2016). Alumina and zircon refractory ceramic molds fabrication by additive methods for metal alloys casting. Paper presented at 6th International Conference on Shaping of Advanced Ceramics, Montpellier, France.

Mertens, A., & Lecomte-Beckers, J. (2016). On the role of interfacial reactions, dissolution and secondary precipitation during the laser additive manufacturing of metal matrix composites - A Review. In I. V. Shishkovsky (Ed.), New Trends in 3D Printing (pp. 187-213). Rijeka, Croatia: Intech. doi:10.5772/63045

Mertens, A., Dedry, O., Reuter, D., Rigo, O., & Lecomte-Beckers, J. (01 June 2016). Microstructural evolution during the heat treatment of Laser Beam Melted AlSi10Mg. Paper presented at Thermec 2016 International Conference on Processing and Manufacturing of Advanced Materials, Graz, Austria.

Mertens, A., L'Hoest, T., Lecomte-Beckers, J., Magnien, J., & Carrus, R. (27 May 2016). On the laser additive manufacturing of metal matrix composites. Paper presented at Additive Manufacturing Workshop Brussels, Bruxelles, Belgium.

Mertens, A., Dedry, O., Lecomte-Beckers, J., Reuter, D., & Rigo, O. (26 May 2016). Understanding the effect of thermal treatments on the ductility of LBM AlSi10Mg. Paper presented at Additive Manufacturing Workshop Brussels, Bruxelles, Belgium.

Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Carrus, R., & Lecomte-Beckers, J. (2016). On the Laser Cladding of Ti Alloy Ti-6Al-4V with Low Laser Power. In V. Ventakesh, A. L. Pilchak, J. E. Allison, S. Ankem, R. Boyer, J. Christodoulou, H. L. Fraser, M. A. Imam, Y. Kosaka, A. Chatterjee, & A. Woodfield (Eds.), Proc. of the 13th World Conference on Titanium (pp. 1299-1304). Hoboken, United States - New Jersey: John Wiley & Sons. doi:10.1002/9781119296126.ch220

Gravet, D., Carton, M., Contrepois, Q., Mertens, A., Dedry, O., Lecomte-Beckers, J., & Dormal, T. (2016). RAPPORT FINAL - Portefeuille de projets TipTopLam. Liège, Belgium: Sirris.

Bister, G., Deschuyteneer, D., Hautcoeur, D., Nyssen, P., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (23 March 2016). Refractory ceramic molds fabrication by additive methods for low and high melting point metal alloys casting. Paper presented at Journées annuelles GFC - BCerS, Valenciennes, France.

Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Carrus, R., Habraken, A., & Lecomte-Beckers, J. (09 February 2016). Local thermal history during the laser additive manufacturing of steel. Paper presented at 4th CFD and Thermomechanics Days, Maizières, France.

Dedry, O., Mertens, A., & Lecomte-Beckers, J. (2016). FLYCOAT - Programme d'excellence : Rapport scientifique et technique 1°phase 1er Mars 2015 au 29 Février 2016. Univéristé de Liège.

Mertens, A. (2015). Current issues in the processing of Ti alloy Ti6Al4V by laser additive manufacturing techniques. (Université catholique de Louvain - Ecole Polytechnique de Louvain, LMECA2453 - Advanced manufacturing technologies (Prof. A. Simar)).

Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchuindjang, J. T. (15 November 2015). Laser cladding as repair technology for Ti6Al4V alloy: Influence of building strategy on microstructure and hardness. Materials and Design, 85, 497-510. doi:10.1016/j.matdes.2015.07.035

Bister, G., Deschuyteneer, D., Hautcoeur, D., Nyssen, P., Juste, E., Mertens, A., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (26 October 2015). Production of alumina foundry moulds by additive manufacturing for low and high melting points alloys prototypes. Poster session presented at Annual meeting of the Belgian Ceramic Society, Mons, Belgium.

Hashemi, S. N., Gilles, G., Tomé Jardin, R. A., Tran, H. S., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (23 October 2015). 2D Thermal model of powder injection laser cladding of high speed steels (HSS). Paper presented at European Mechanics Society (EUROMECH).

Carton, M., Contrepois, Q., Mertens, A., & Lecomte-Beckers, J. (2015). TipTopLam - Rapid manufacturing laser de pièces en titane (2008-2015), volet 1: Caractérisation microstructurale. Sirris.

Contrepois, Q., Mertens, A., Dedry, O., & Lecomte-Beckers, J. (2015). TipTopLam - Rapid manufacturing laser de pièces en titane (2008-2015), volet 2: FGM Porosité. Sirris.

Mertens, A., Dedry, O., Reuter, D., Rigo, O., & Lecomte-Beckers, J. (2015). Thermal Treatments of AlSi10Mg Processed by Laser Beam Melting. In D. Bourell (Ed.), Proceedings of the 26th International Solid Freeform Fabrication Symposium (pp. 1007-1016).

Mertens, A., & Lecomte-Beckers, J. (January 2015). Metal matrix nanocomposite coatings for improving the usage properties of metallic materials. Paper presented at Workshop “How to optimise your coating using nano technology”, Liège, Belgium.

Mertens, A., Simar, A., Adrien, J., Maire, E., Montrieux, H.-M., Delannay, F., & Lecomte-Beckers, J. (2015). Influence of Fibre Distribution and Grain Size on the Mechanical Behaviour of Friction Stir Processed Mg-C Composites. Materials Characterization, 107, 125. doi:10.1016/j.matchar.2015.07.010

Ryelandt, S., Mertens, A., & Delannay, F. (2015). Al/stainless-invar composites with tailored anisotropy for thermal management in light weight electronic packaging. Materials and Design, 85, 318-323. doi:10.1016/j.matdes.2015.06.178

Mertens, A. (2014). Modification de la microstructure des métaux après déformation plastique : Restauration et recristallisation. (ULiège - Université de Liège, MECA0473-1 Ingénierie des matériaux métalliques (Prof. J. Lecomte-Beckers)).

Mertens, A. (2014). An Introduction to the Additive Manufacturing of Metallic Materials - Two Case Studies on the Processing of Stainless Steel 316L and of Ti Alloy Ti-6Al-4V. (ULiège - Université de Liège, MECA0473-1 Ingénierie des matériaux métalliques (Prof. J. Lecomte-Beckers)).

Mertens, A. (2014). Additive Manufacturing of Metallic Materials: Case Studies in the Processing of Stainless Steel 316L and of Alloy Ti-6Al-4V by Laser Beam Melting. (Université catholique de Louvain - Ecole Polytechnique de Louvain, LMECA2453 Compléments de fabrication mécanique et FAO (Prof. A. Simar)).

Mertens, A., & Lecomte-Beckers, J. (2014). Processing metallic materials by additive technologies - Specificities of the thermal history and microstructures. Paper presented at "Business meets research" - Workshop on Additive Manufacturing, Luxembourg, Luxembourg.

Mertens, A., & Lecomte-Beckers, J. (20 May 2014). Les composites à matrice métallique/céramique – De nouveaux procédés de fabrication pour de nouvelles applications. Paper presented at Nouveaux matériaux à haute performance : Les composites à matrice métallique/céramique, Liège, Belgium.

Mertens, A., Paydas, H., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (May 2014). Processing of alloy Ti-6Al-4V and of stainless steel 316L by Laser Beam Melting. Paper presented at 2nd Spring Meeting, IAP 7/21, Intermate "Multiscale Mechanics of Interface Dominated Materials", Gand, Belgium.

Mertens, A., & Lecomte-Beckers, J. (2014). Techniques additives vs techniques conventionnelles-les microstructures. Paper presented at Journée d'étude : "Imprimante 3D, Techniques Additives : une révolution industrielle, Liège, Belgium.

Lecomte-Beckers, J., Mertens, A., Carton, M., & Contrepois, Q. (2014). Rapport Final, Projet FEDER Programmation 2007-2013, portefeuille de projets SINUS : Simulation Numérique Haute Performance. ULg - Université de Liège.

Maggi, C., Pagès, G., Hoffsummer, P., Mathis, F., & Mertens, A. (2014). Dating Metallic Reinforcements in Roof Frames. In C. Bolle, G. Coura, & J.-M. Léotard (Eds.), L'archéologie des bâtiments en question. Un outil pour les connaître, les conserver et les restaurer (pp. 322-323). Namur, Belgium: Service Public de Wallonie.

Mertens, A., Bellhouse, E. M., & McDermid, J. R. (2014). Microstructure and Mechanical Properties of a Mixed Si-Al TRIP-Assisted Steel Subjected to Continuous Galvanizing Heat Treatments. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 608, 249-257. doi:10.1016/j.msea.2014.04.074

Mertens, A., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2014). Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting. Materials Science Forum, 783-786 (2014), 898-903. doi:10.4028/www.scientific.net/MSF.783-786.898

Mertens, A., Reginster, S., Paydas, H., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2014). Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by Selective Laser Melting: Influence of out-of-equilibrium microstructures. Powder Metallurgy, 57 (3), 184-189. doi:10.1179/1743290114Y.0000000092

Mertens, A., Simar, A., Garray, D., Halleux, J., Montrieux, H.-M., & Lecomte-Beckers, J. (05 December 2013). Friction Stir Processing of Magnesium Matrix Composites Reinforced with Carbon Fibres or Carbon Nanotubes - A Comparative Study. Paper presented at Thermec 2013 "International Conference on Processing & Manufacturing of Advanced Materials", Las Vegas (NV), United States.

Mertens, A., Paydas, H., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (07 November 2013). Measuring the thermophysical properties of materials at high temperature - Application to the additive manufacturing of alloy Ti-6Al-4V and of stainless steel 316L. Paper presented at 2013 BEMEKO workshop on measurement : Challenges and Opportunities, Liège, Belgium.

Montrieux, H.-M., Lecomte-Beckers, J., & Mertens, A. (October 2013). Les matrices métalliques et céramiques : de nouveaux matériaux composites. Plus Composites, article n°3.

Mertens, A., Reginster, S., Paydas, H., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (12 September 2013). On the Role of Out-of-Equilibrium Microstructures in Ti-6Al-4V and in Stainless Steel 316L Processed by Selective Laser Melting in Determining their Mechanical Properties. Paper presented at EUROMAT 2013 - European Congress and Exhibition on Advanced Materials and Processes, Sevilla, Spain.

Mertens, A., Simar, A., Garray, D., Halleux, J., Montrieux, H.-M., & Lecomte-Beckers, J. (09 September 2013). Microstructure and Thermomechanical Behaviour of Magnesium – C nanotubes Composites produced by Friction Stir Processing. Paper presented at EUROMAT 2013 - European Congress and Exhibition on Advanced Materials and Processes, Sevilla, Spain.

Montrieux, H.-M., Demy, P., Ibarra-Castanedo, C., Mertens, A., Gerlach, N., Lecomte-Beckers, J., & Maldague, X. (2013). Comparison between optical pulsed thermography and vibrothermography for the assessment of carbon fibers composite materials. Paper presented at International Symposium on Applied Electromagnetics and Mechanics, Québec, Canada.

Reginster, S., Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2013). Processing of Ti alloys by additive manufacturing: a comparison of the microstructures obtained by laser cladding, selective laser melting and electron beam melting. Materials Science Forum, 765, 431-417. doi:10.4028/www.scientific.net/MSF.765.413

Montrieux, H.-M., Mertens, A., & Lecomte-Beckers, J. (2012). Développement d’une ailette d’obus en composite magnésium renforcé de fibres de carbone. Région Wallonne.

Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Simar, A., Delannay, F., Maire, E., & Adrien, J. (12 November 2012). Influence of Fiber Distribution and Grain Size on the Mechanical Behavior of Friction Stir Processed Mg-C Composites. Paper presented at 1st Fall Meeting, IAP 7/21, Intemate Multiscale Mechanics of Interface Dominated Material, La Roche-En-Ardenne, Belgium.

Simar, A., de Meester, B., Delannay, F., Mertens, A., Lecomte-Beckers, J., Avettand-Fenoel, M.-N., Shabadi, R., Taillard, R., Maire, E., & Adrien, J. (29 October 2012). Composite Manufacturing by Friction Stir Processing. Paper presented at Journées d’Automne, Paris, France.

Mertens, A., Guzmán Inostroza, C. F., Habraken, A., Behera, A. K., Duflou, J., & Lecomte-Beckers, J. (September 2012). Experimental Characterisation of Damage Occuring during Single Point Incremental Forming of a Ferritic Steel. Poster session presented at Hardening and Damage of Materials uder Finite Deformations : Constitutive Modeling and Numerical Implementation, Dortmund, Germany.

Mertens, A., Simar, A., Montrieux, H.-M., Halleux, J., Delannay, F., & Lecomte-Beckers, J. (2012). Friction Stir Processing of Magnesium Matrix Composites reinforced with Carbon Fibres: Influence of the Matrix Characteristics and of the Processing Parameters on Microstructural Developments. In K. U. K. W.J.Poole (Ed.), Proceedings of the 9th International Conference On Magnesium Alloys and their Apllications.

Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Simar, A., Delannay, F., & Halleux, J. (05 July 2012). Production of Mg-matrix composites with C fibres reinforcement : liquid - vs solid - state processing routes. Paper presented at Seminaire hebdomadaire, Hamilton (ON), Canada.

Mertens, A., Montrieux, H.-M., Halleux, J., Lecomte-Beckers, J., & Delannay, F. (25 May 2012). Processing of Carbon Fibers Reinforced Mg Matrix Composites Via Pre-infiltration with Al. Journal of Materials Engineering and Performance, 21 (5), 701-706. doi:10.1007/s11665-012-0177-4

Pagès, G., Maggi, C., L'Heritier, M., Mertens, A., & Mathis, F. (04 May 2012). L’apparition et la diffusion du procédé indirect en Europe Occidentale et l’utilisation des fers en charpente de comble. Paper presented at Fer archéologique : caractérisation, étude technologique et conservation-restauration, Bruxelles, Belgium.

Mertens, A., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2012). Ti alloys processed by selective laser melting and by laser cladding: microstructures and mechanical properties. In proceedings of 12th EUROPEAN CONFERENCE ON SPACECRAFT STRUCTURES, MATERIALS & ENVIRONMENTAL TESTING, Noordwijk 20-23 mars 2012. Noordwijk, Netherlands: ESA communications.

Simar, A., Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Halleux, J., & Delannay, F. (26 January 2012). Microstructure and mechanical properties of stir processed magnesium matrix composites reinforced with carbon fibres. Paper presented at The 2nd International Conference on Friction Stir Welding and Processing (FSWP'2012), Saint-Etienne, France.

Maggi, C., Pagès, G., Mertens, A., & Hoffsummer, P. (2012). Utilisation et technique de production du fer et du bois dans les charpentes de comble mosanes : premiers jalons d’une évolution du XIIe au XVIIIe siècle. ArchéoSciences, 36, 95-115. doi:10.4000/archeosciences.3896

Mertens, A., Simar, A., & Delannay, F. (2012). C Fibres - Mg Matrix Composites Produced by Squeeze Casting and Friction Stir Processing: Microstructure & Mechanical Behaviour. Materials Science Forum, 706-709, 1221-1226. doi:10.4028/www.scientific.net/MSF.706-709.1221

Mertens, A., Lecomte-Beckers, J., Montrieux, H.-M., Halleux, J., & Delannay, F. (September 2011). Processing of carbon fibers reinforced Mg matrix composites via pre-infiltration with Al. Paper presented at Euromat 2011, European congress and exhibition on advanced materials and processes, Montpellier, France.

Montrieux, H.-M., Mertens, A., Halleux, J., Delannay, F., & Lecomte-Beckers, J. (September 2011). Interfacial phenomena in carbon fibre reinforced magnesium alloys processed by squeeze casting and thixomolding. Paper presented at Euromat 2011: European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France.

Mertens, A., Simar, A., & Delannay, F. (August 2011). C FIBERS - MG MATRIX COMPOSITES PRODUCED BY SQUEEZE CASTING AND FRICTION STIR PROCESSING: Microstructure & Mechanical Behaviour. Poster session presented at Thermec 2011 (7th International Conference on Processing & Manufacturing of Advanced Materials), Québec, Canada.

Pagès, G., Mertens, A., Maggi, C., Hoffsummer, P., & Mathis, F. (May 2010). The apparition and the utilization of the indirect process of iron production in the mosan region : a new perception given by the archaeometallurgical study of ferrous reinforcements in medieval frames. Paper presented at 38th International Symposium on Archaeometry, Tampa, United States.

Mertens, A., Mathis, F., DILLMANN, P., & Hoffsummer, P. (February 2009). Iron production in the region of Liège in the Middle Age: Contribution of slag inclusions analyses. Paper presented at World of Iron Conference, London, United Kingdom.

Mertens, A., Mathis, F., Dillmann, P., & Hoffsummer, P. (2009). Emergence du procéde indirect d'élaboration du fer en région liégeoise : apport d'une étude technique de fers de charpentes datées par dendrochronologie. Chimie Nouvelle, 101, 24-28.

Mertens, A., Jacques, P. J., Sietsma, J., & Delannay, F. (December 2008). Relative Influence of Aluminium and Silicon on the Kinetics of Bainite Formation from Intercritical Austenite. Steel Research International, 79 (12), 954-959. doi:10.2374/SRI08SP068

Mertens, A. (10 October 2008). La production du fer en région liégeoise au Moyen-Age: Apport d'une analyse technologique de renforts de charpentes datées par dendrochronologie. Paper presented at Colloque "Les métiers de la forge - Le fer forgé du Moyen Age à nos jours", Amay, Belgium.

Fourmentin, R., Mertens, A., & McDermid, J. R. (2007). Microstructure and properties of rapidly heat treated and galvanized dual phase steel. In T. Tsuru (Ed.), Proceedings of the 7th international conference on zinc and zinc alloy coated steel sheet (pp. 380-385). Iron and Steel Institute of Japan.

Mertens, A., & McDermid, J. R. (2007). Influence of Chemical Composition on the Microstructure and Mechanical Properties of Multiphase TRIP-assisted Steels Processed Using Thermal Cycles Compatible With Continuous Hot-Dip Galvanizing. Iron and Steel Technology, 107-113.

Bellhouse, E. M., Mertens, A., & McDermid, J. R. (2007). Development of the surface structure of TRIP steels prior to hot-dip galvanizing. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 463, 147-156. doi:10.1016/j.msea.2006.09.117

Khondker, R., Mertens, A., & McDermid, J. R. (2007). Effect of Annealing Atmosphere on the Galvanizing Behaviour of a Dual-Phase Steel. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 463, 157-165. doi:10.1016/j.msea.2006.09.116

Fourmentin, R., Mertens, A., & McDermid, J. R. (2006). Microstructure and Properties of Rapid Heat Treated Galvanized Dual Phase Steels. In Proceedings of the MS&T'06 Conference (pp. 119-130).

Mertens, A., & McDermid, J. R. (2006). Influence of chemical composition on the microstructure and mechanical properties of multiphase TRIP-assisted steels, processed using thermal cycles compatible with continuous hot-dip galvanizing. In Proceedings of the MS&T'06 Conference (pp. 131-142).

Fourmentin, R., Mertens, A., & McDermid, J. R. (May 2006). Microstructure and properties of rapid heat treated and galvanised dual-phase steel. Poster session presented at AUTO 21 HQP Meeting, Barrie, Canada.

Bellhouse, E. M., Mertens, A., & McDermid, J. R. (March 2006). Development of the surface structure of TRIP steels prior to hot-dip galvanizing. Paper presented at 2006 TMS annual meeting and exhibition, San Antonio, United States - Texas.

Khondker, R., Mertens, A., & McDermid, J. R. (March 2006). Effect of annealing atmosphere on the galvanizing behaviour of a dual-phase steel. Paper presented at 2006 TMS annual meeting and exhibition, San Antonio, United States - Texas.

Mertens, A., & McDermid, J. R. (2005). The effect of continuous galvanizing thermal cycle on the microstructure and mechanical properties of two multiphase TRIP-assisted steels. In Proceedings of the MS&T'05 Conference (pp. 25-35).

Mertens, A., Bellhouse, E. M., Fourmentin, R., & McDermid, J. R. (28 June 2005). The effect of continuous galvanizing thermal cycle on the microstructure and mechanical properties of two multiphase TRIP-assisted steels.

Mertens, A., Brown, A. J., Zhao, L., McDermid, J. R., van der Zwaag, S., & Sietsma, J. (2004). Dilatometric Investigations on the Decomposition of Austenite in Two Medium-Carbon Steels With and Without Cr and Mo Additions. In Proceedings of the MS&T'04 Conference (pp. 187-198).

Mertens, A., Brown, A. J., & Sietsma, J. (04 September 2003). Experimental study of phase transformations in medium-carbon steels.

Mertens, A., Jacques, P. J., Zhao, L., Kruijver, S. O., Sietsma, J., & Delannay, F. (28 August 2003). Influence of aluminium and silicon on the kinetics of bainite transformation of intercritical austenite: experimental study and modelling attempts. Paper presented at Workshop on TRIP-assisted steels, Vancouver, Canada.

Mertens, A., van Bohemen, S. M. C., Hermans, M. J. M., Sietsma, J., & van der Zwaag, S. (2003). Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel. In M. Militzer, W. J. Poole, & E. Essadiqi (Eds.), Proceedings of the International Symposium on Transformation and Deformation Mechanisms in Advanced High-Strength Steels (pp. 109-124).

Mertens, A., van Bohemen, S. M. C., Hermans, M. J. M., Sietsma, J., & van der Zwaag, S. (22 May 2003). Acoustic-emission and dilatometric investigations of the influence of Cr on the austenite decomposition kinetics. Paper presented at Materials Research 2003, Veldhoven, Netherlands.

Mertens, A., Jacques, P. J., Zhao, L., Kruijver, S. O., Sietsma, J., & Delannay, F. (2003). On the influence of aluminium and silicon contents on the kinetics of bainite transformation of intercritical austenite. Journal de Physique IV, 112, 305-308. doi:10.1051/jp4:2003889

Mertens, A. (June 2002). Influence of aluminium on the phase transformations during the heat treatments for the processing of multiphase TRIP-assisted steels. Paper presented at Workshop on High-Strength Steels, Louvain-la-Neuve, Belgium.

Mertens, A., Jacques, P. J., Harlet, P., & Delannay, F. (2002). On the optimisation of the mechanical properties of two aluminium-alloyed multiphase TRIP-assisted steels. In B. C. De Cooman (Ed.), Proccedings of the International Conference on TRIP-Aided High Strength Ferrous Alloys.

Mertens, A., Jacques, P. J., Zhao, L., Kruijver, S. O., Sietsma, J., & Delannay, F. (June 2002). On the influence of aluminium and silicon contents on the kinetics of bainite transformation of intercritical austenite. Paper presented at International Conference on Martensitic Transformation (ICOMAT'02), Helsinki, Finland.

Ros-Yanez, T., Houbaert, Y., Petrov, R., & Mertens, A. (2002). Characterisation of TRIP-assisted steel by atomic force microscopy and OIM. In B. C. De Cooman (Ed.), Proceedings of the International Conference on TRIP-Aided High-Strength Ferrous Alloys (pp. 85-90).

Mertens, A., van Bohemen, S. C. M., Hermans, M. J. M., Sietsma, J., & van der Zwaag, S. (May 2002). Acoustic-emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling. Poster session presented at Materials Research 2002, Veldhoven, Netherlands.

Zhao, L., Kop, T. A., Rolin, V., Siestma, J., Mertens, A., Jacques, P. J., & van der Zwaag, S. (2002). Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel. Journal of Materials Science, 37, 1585-1591. doi:10.1023/A:1014941424093

Girault, E., Mertens, A., Jacques, P. J., Houbaert, Y., Verlinden, B., & van Humbeeck, J. (2001). Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels. Scripta Materialia, 44, 885-892. doi:10.1016/S1359-6462(00)00697-7

Jacques, P. J., Furnémont, Q., Mertens, A., & Delannay, F. (2001). On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties, 81 (7), 1789-1812. doi:10.1080/01418610108216637

Jacques, P. J., Girault, E., Mertens, A., Verlinden, B., van Humbeeck, J., & Delannay, F. (2001). The Developments of Cold-rolled TRIP-assisted Multiphase Steels. Al-alloyed TRIP-assisted Multiphase Steels. ISIJ International, 41 (9), 1068-1074. doi:10.2355/isijinternational.41.1068

Mertens, A., Jacques, P. J., Lazarova, R., Zhao, L., Sietsma, J., & Delannay, F. (2001). On the influence of aluminium content on the stability of retained austenite in multiphase TRIP-assisted steels. Journal de Physique IV, 11, 8-223-Pr8-228. doi:10.1051/jp4:2001838

Ros-Yanez, T., Houbaert, Y., & Mertens, A. (2001). Characterization of TRIP-assisted multiphase steel surface topography by atomic force microscopy. Materials Characterization, 47, 93-104. doi:10.1016/S1044-5803(01)00157-7

Mertens, A., Jacques, P. J., Lazarova, R., Zhao, L., Sietsma, J., & Delannay, F. (September 2000). On the influence of aluminium content on the stability of retained austenite in multiphase TRIP-assisted steels. Poster session presented at Fifth European Symposium on Martensitic Transformations and Shape Memory Alloys (ESOMAT 2000), Come, Italy.

Jacques, P., Girault, E., Mertens, A., van Humbeeck, J., Houbaert, Y., Aernoudt, E., & Delannay, F. (1999). Influence of Silicon and Aluminium Contents on the Phase Transformations During the Heat-Treatment of TRIP-assisted Multiphase Steels. In S. J. Mideat & G. D. Pfaffmann (Eds.), Proceedings of the International Symposium in honor of Prof. G. Krauss, 19th Heat Treating Society Conference (pp. 565-571).

Destoop, V., Mertens, A., Hendrix, W., Thijs, I., & Erauw, J.-P. (1997). The effect of dispersion and atomisation conditions on the compaction response of silicon nitride granules. Key Engineering Materials, 132-136, 408-411.