Publications and communications of Jean-Claude Golinval

Theunissen, K., Verstraelen, E., Golinval, J.-C., & Denoël, V. (2023). Localization of Structural Damage Based on First Passage Times for a Pre-stressed Steel Strip. In H. Y. Noh (Ed.), Dynamics of Civil Structures, Volume 2 - Proceedings of the 41st IMAC, A Conference and Exposition on Structural Dynamics 2023. Springer. doi:10.1007/978-3-031-36663-5_13

Brégand, O., Hardy, Y., Gerkens, P., Golinval, J.-C., Hoffait, S., Bertha, M., Simon, D., Briault, P., & Van Eenennaam, J. (2023). Towards High Speed Galvanizing – Mastering Wiping Conditions Using Hydrodynamic Pads Strip Stabilization. In Proceedings of GALVATECH 2023. Séoul, South Korea: The Corrosion Science Society of Korea (CSSK).

Theunissen, K., Verstraelen, E., Golinval, J.-C., & Denoël, V. (2022). Influence of structural damages on first passage time maps. International Conference on Noise and Vibration Engineering ISMA2022.

Denis, S., Hoffait, S., Ligot, J., Lengele, M., Mahy, P., de Cazenove, J., & Golinval, J.-C. (2022). Development of an autonomous experimental system to identify BLISK mistuning. In ISMA-USD Conference, Conference Proceedings of ISMA2022 - USD2022. Leuven, Belgium: ISMA-USD Conference.

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (05 August 2022). Reduced Order Modeling of Cyclically Symmetric Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 15th World Congress on Computational Mechanics.

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2022). Reduced Order Modeling of Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 8th International Conference on Advanced Computational Methods in Engineering.

Hoffait, S., Ligot, J., Bertha, M., Moschini S., Simon, D., & Golinval, J.-C. (2019). Poly-Reference Least-Square Complex Frequency Identification Revised to Improve Damping Estimation. In N. Maia, Proceeding of ICEDyn 2019. Lisboa, Portugal: Instituto Superior Técnico.

Delhez, E., Vanvinckenroye, H., Golinval, J.-C., & Denoël, V. (2018). Numerical and experimental study of first passage time of a steel strip subjected to forced and parametric excitations. In Proceedings of the 28th International Conference on Noise and Vibration Engineering.

Hoang Truong, V., Wu, L., Golinval, J.-C., Arnst, M., & Noels, L. (April 2018). Stochastic multiscale model of MEMS stiction accounting for high order statistical moments of non-Gaussian contacting surfaces. Journal of Microelectromechanical Systems, 27 (2), 137-155. doi:10.1109/JMEMS.2018.2797133

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 November 2017). A stochastic 3-scale method to predict the thermo-elastic behaviors of polycrystalline structures [Paper presentation]. ECCOMAS Thematic Conference: Computational Modeling of Complex Materials across the Scales (CMCS 2017), Paris, France.

Golinval, J.-C. (2017). Damage Detection in Structures Based on Principal Component Analysis of Forced Harmonic Responses. In Procedia Engineering (pp. 1912-1918). Elsevier. doi:10.1016/j.proeng.2017.09.449

Lucas, V., Golinval, J.-C., Voicu, R., Danila, M., Gravila, R., Muller, R., Dinescu, A., Noels, L., & Wu, L. (06 July 2017). Propagation of material and surface profile uncertainties on MEMS micro-resonators using a stochastic second-order computational multi-scale approach. International Journal for Numerical Methods in Engineering, 111 (1), 26-68. doi:10.1002/nme.5452

Golinval, J.-C. (03 July 2017). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. International Conference on Structural Dynamics - ICEDyn 2017, Ericeira, Portugal.

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (June 2017). A computational stochastic multiscale methodology for MEMS structures involving adhesive contact. Tribology International, 110, 401-425. doi:10.1016/j.triboint.2016.10.007

Bertha, M., & Golinval, J.-C. (01 May 2017). Identification of non-stationary dynamical systems using multivariate ARMA models. Mechanical Systems and Signal Processing, 88, 166-179. doi:10.1016/j.ymssp.2016.11.024

Hoffait, S., Marin, F., Simon, D., & Golinval, J.-C. (2016). Virtual Shaker Testing : développement et utilisation en vue d’améliorer la stratégie de contrôle. In AVE2016 - 5ième Colloque Francophone "Analyse Vibratoire Expérimentale".

Wu, L., Lucas, V., Nguyen, V. D., Golinval, J.-C., Paquay, S., & Noels, L. (01 October 2016). A Stochastic Multi-Scale Approach for the Modeling of Thermo-Elastic Damping in Micro-Resonators. Computer Methods in Applied Mechanics and Engineering, 310, 802-839. doi:10.1016/j.cma.2016.07.042

Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (2016). Virtual shaker testing at V2i: measured-based shaker model and industrial test case. In Conference proceedings of ISMA2016 - USD2016.

Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (03 May 2016). Measured-based shaker model to virtually simulate vibration sine test. Case Studies in Mechanical Systems and Signal Processing, 4, 1-7. doi:10.1016/j.csmssp.2016.04.001

Bertha, M., & Golinval, J.-C. (2016). Time-Varying Modal Parameters Identification in the Modal Domain. In Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering.

Bertha, M., & Golinval, J.-C. (2016). Multivariate ARMA Based Modal Identification of a Time-varying Beam. In Proceedings of the International Modal Analysis Conference (IMAC) XXXIV. doi:10.1007/978-3-319-30249-2_24

Hoang Truong, V., Wu, L., Paquay, S., Obreja, A. C., Voicu, R., Müller, R., Golinval, J.-C., & Noels, L. (December 2015). A probabilistic model for predicting the uncertainties of the humid stiction phenomenon on hard materials. Journal of Computational and Applied Mathematics, 289, 173 - 195. doi:10.1016/j.cam.2015.02.022

Lucas, V., Golinval, J.-C., Paquay, S., Nguyen, V. D., Noels, L., & Wu, L. (01 September 2015). A stochastic computational multiscale approach; Application to MEMS resonators. Computer Methods in Applied Mechanics and Engineering, 294, 141–167. doi:10.1016/j.cma.2015.05.019

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., & Noels, L. (09 July 2015). A probabilistic multi-scale model for polycrystalline MEMS resonators [Paper presentation]. 9th European Solid Mechanics Conference, ESMC15, Madrid, Spain.

Hoang Truong, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). A stochastic multiscale analysis for MEMS stiction failure [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). Propagation of uncertainties in the modelling of MEMS resonators (using a 3-scale probabilistic approach) [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., Mulay, S., & Noels, L. (25 February 2015). Propagation of uncertainties using probabilistic multi-scale models [Paper presentation]. Euromech 559 Multi-scale computational methods for bridging scales in materials and structures, Eindhoven, Netherlands.

Nyssen, F., & Golinval, J.-C. (2015). Identification of Mistuning and Model Updating of an Academic Blisk Based on Geometry and Vibration Measurements. Mechanical Systems and Signal Processing. doi:10.1016/j.ymssp.2015.08.006

Golinval, J.-C. (20 November 2014). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. 4ème Colloque "Analyse Vibratoire Expérimentale", Blois, France.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (27 August 2014). Prediction of meso-scale mechanical properties of poly-silicon materials [Paper presentation]. EMMC14 - European Mechanics of Materials Conference 2014, Gothenburg, Sweden.

Bertha, M., & Golinval, J.-C. (July 2014). Experimental modal analysis of a beam travelled by a moving mass using Hilbert Vibration Decomposition [Paper presentation]. 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal.

Hoang Truong, V., Wu, L., Arnst, M., Golinval, J.-C., Muller, R., Voicu, R., & Noels, L. (26 June 2014). A probabilistic model of the adhesive contact forces between rough surfaces in the MEMS stiction context [Paper presentation]. 6th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Ghent, Belgium.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., Nguyen, V. D., & Noels, L. (2014). Prediction of macroscopic mechanical properties of a polycrystalline microbeam subjected to material uncertainties. In Á. Cunha, E. Caetano, P. Ribeiro, ... G. Muller (Eds.), Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014 (pp. 2691-2698).

Bertha, M., & Golinval, J.-C. (2014). Identification of a Time-varying Beam Using Hilbert Vibration Decomposition. In Proceedings of the International Modal Analysis Conference (IMAC) XXXII.

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Damage Detection in Civil Engineering Structure Considering Temperature Effect. In Proceedings of IMAC XXXII Dynamics of Coupled Structures. doi:10.1007/978-3-319-04546-7_22

Bertha, M., & Golinval, J.-C. (2014). Modal identification of time-varying systems using Hilbert transform and signal decomposition [Paper presentation]. ISMA 2014 conference.

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. Shock and Vibration, 2014. doi:10.1155/2014/872492

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (December 2013). Probabilistic model for MEMS micro-beam resonance frequency made of polycrystalline linear anisotropic material [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore.

Nguyen, V. H., Mahowald, J., Golinval, J.-C., & Maas, S. (2013). Detection and Localisation of Damage on Industrially Produced Concrete Slabs Through Time- and Frequency-Domain Approaches. In E. Carrera, F. Miglioretti, ... M. Petrolo (Eds.), 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2013).

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2013). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. In N. Maia, N. Neves, ... R. Sampaio (Eds.), International Conference on Structural Engineering Dynamics : ICEDyn 2013, Sesimbra 17-19 June 2013. IST/IDMEC.

Wu, L., Noels, L., & Golinval, J.-C. (2013). ON THE MODELING OF ADHESIVE CONTACT AND STICTION FAILURE IN MICRO-SWITCHES. In Ouisse (FEMTO-ST – ENSMM, France) & J. F. Deü (CNAM, FR) (Eds.), MEDYNA 2013 Proceedings (Creative Commons Attribution-NoDerivs 3.0 Generic (CC BY-ND 3.0) License, pp. 377-380).

Wu, L., Golinval, J.-C., & Noels, L. (January 2013). A Micro Model for Elasto-Plastic Adhesive-Contact in Micro-Switches: Application to cyclic loading. Tribology International, 57, 137-146. doi:10.1016/j.triboint.2012.08.003

Wu, L., Golinval, J.-C., & Noels, L. (24 November 2012). Stiction failure in microswitches due to elasto-plastic adhesive contact and cyclic loading [Paper presentation]. Nanomechanics and nanotribology for reliability design of micro- and nanosystems - international exploratory workshop, Cluj Napoca, Romania.

Bertha, M., & Golinval, J.-C. (November 2012). Identification modale de systèmes variant dans le temps à partir de réponses simulées sur un exemple d'éoliennes [Poster presentation]. 3ième Colloque "Analyse Vibratoire Expérimentale", Blois, France.

Demy, P., Golinval, J.-C., & Simon, D. (2012). Détection d'endommagement et résonances locales sur composite CFRP par vibrothermographie. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Marin, F., Simon, D., & Golinval, J.-C. (2012). Qualification d’un appareil d'éclairage décoratif soumis aux vibrations induites par un pont ferroviaire. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Nyssen, F., Golinval, J.-C., Simon, D., & Viguié, R. (2012). Méthodologie d’excitation de modes à diamètres nodaux d’un anneau statorique de turboréacteur. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Bertha, M., Mayorga Rios, J. P., & Golinval, J.-C. (2012). Modal identification of time-varying systems using simulated responses on wind turbines. In P. Sas, D. Moens, ... S. Jonckheere (Eds.), Proceedings of ISMA2012-USD2012 (pp. 4285-4296). Leuven, Belgium: KU Leuven.

Elkarous, L., Pirlot, M., & Golinval, J.-C. (2012). Étalonnage dynamique des capteurs piézoélectriques pour la mesure de haute pression balistique. In 4ème Conférence Internationale de métrologie - CAFMET2012.

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2012). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. Shock and Vibration, 19 (5), 795-801. doi:10.3233/SAV-2012-0688

Nguyen, V. H., Rutten, C., Golinval, J.-C., Mahowald, J., Maas, S., & Waldmann, D. (2012). Damage Detection on the Champangshiehl Bridge using Blind Source Separation. In A. Strauss, D. M. Frangopol, ... K. Bergmeister (Eds.), Life-Cycle and Sustainability of Civil Infrastructure Systems. London, United Kingdom: Taylor & Francis Group.

Pustan, M., Muller, R., & Golinval, J.-C. (2012). Nanomechanical and nanotribological characterization of microelectromechanical system. Journal of Optoelectronics and Advanced Materials, 14 (3-4), 401-412.

Pustan, M., Rochus, V., & Golinval, J.-C. (2012). Mechanical and tribological characterization of a thermally actuated MEMS cantilever. Microsystem Technologies. doi:10.1007/s00542-011-1423-7

Wu, L., Golinval, J.-C., & Noels, L. (2012). Stiction failure in microswitches due to elasto-plastic adhesive contact. In Proceedings of the XII SEM International Conference & Exposition on Experimental and Applied Mechanics (pp. 9).

Demy, P., Golinval, J.-C., & Simon, D. (2011). Détection d'endommagement de structures en matériaux composites CFRP par vibrothermographie. In J.-M. Desse, P. Picart, ... P. Tankam (Eds.), Actes du 12ème colloque international francophone sur les méthodes et techniques optiques pour l'industrie. France: Les éditions de la Société Française d'Optique.

Wu, L., Golinval, J.-C., & Noels, L. (2011). Influence of the elasto-plastic adhesive contact on Micro-Switches. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, C. Geuzaine, L. Noels, J.-F. Remacle, ... E. Béchet (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 8).

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (01 August 2011). A Micro-Macroapproach to Predict Stiction due to Surface Contact in Microelectromechanical Systems. Journal of Microelectromechanical Systems, 20 (4), 976 - 990. doi:10.1109/JMEMS.2011.2153823

Elkarous, L., Pirlot, M., Golinval, J.-C., & Maldague, M. (2011). Investigation on gas pressure measurement inside small caliber weapons with piezoelectric transducers. In Measurement Science Conference 2012.

Golinval, J.-C. (06 January 2011). Diagnostic de l’état mécanique de structures par analyse de vibrations [Paper presentation]. Les Jeudis des Sciences, Luxembourg, Luxembourg.

Nguyen, V. H., & Golinval, J.-C. (2011). Damage Detection Using Blind Source Separation Techniques. In IMAC-XXIX: Conference & Exposition on Structural Dynamics - Advanced Aerospace Applications. Springer.

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2011). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. In N. M. Maia NNM (Ed.), International Conference on Structural Engineering Dynamics (ICEDyn 2011) - Proceedings.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Modal testing of nonlinear vibrating structures based on nonlinear normal modes: Experimental demonstration. Mechanical Systems and Signal Processing, 25, 1227-1247. doi:10.1016/j.ymssp.2010.11.006

Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Dynamic testing of nonlinear vibrating structures using nonlinear normal modes. Journal of Sound and Vibration, 330. doi:10.1016/j.jsv.2010.08.028

Peeters, M., Renson, L., Kerschen, G., Golinval, J.-C., Stéphan, C., & Lubrina, P. (2011). Computation of nonlinear normal modes of large structures: application to a full-scale aircraft. In Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011).

Pustan, M., Belcin, O., & Golinval, J.-C. (2011). Dynamic investigations of paddle MEMS cantilevers used in mass sensing applications. In M. Arghir (Ed.), Acta Technica Napocensis of The Technical University of Cluj-Napoca (pp. 117-122).

Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Industrial applications of extended output-only Blind Source Separation techniques. Vibration Problems Icovp 2011: The 10th International Conference on Vibration Problems.

Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Comparison of output-only methods for condition monitoring of industrials systems. Journal of Physics. Conference Series, 305. doi:10.1088/1742-6596/305/1/012101

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2010). Fault detection in mechanical systems based on subspace features. International Conference on Noise and Vibration Engineering.

Nguyen, V. H., & Golinval, J.-C. (2010). Damage Diagnosis of Beam-like Structures Based on Sensitivities of Principal Component Analysis Results. In IMAC-XXVIII A Conference on Structural Dynamics. Stoughton, United States - Wisconsin: The Printing House, Inc.

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (01 December 2009). Influence of Adhesive Rough Surface Contact on Micro-Switches. Journal of Applied Physics, 106 (11), 113502. doi:10.1063/1.3260248

Marin, F., Marville, C., & Golinval, J.-C. (2009). Qualification Procedure of Luminaires in the Event of an Impact to the Pole [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium.

Rutten, C., Loffet, C., & Golinval, J.-C. (2009). Damage Detection of Mechanical Components Using Null Subspace Analysis [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium.

Golinval, J.-C. (2009). Parameter estimation and structural model updating using modal methods in the presence of nonlinearity [Paper presentation]. SICON Final Conference, Rome, Italy.

Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2009). Nonlinear normal modes, Part 1: Useful framework for the structural dynamicist. Mechanical Systems and Signal Processing, 23, 170-194. doi:10.1016/j.ymssp.2008.04.002

Nguyen, V. H., Peeters, M., & Golinval, J.-C. (2009). Detection of nonlinearity in a dynamic system using deformation modes obtained from the Wavelet Transfrom of measured responses [Paper presentation]. Internaional Conference on Structural Engineering Dynamics (ICEDyn 2009), Ericeira, Portugal.

Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2008). Nonlinear Normal Modes, Part I: An Attempt To Demystify Them. In 26th International Modal Analysis Conference, Orlando, 2008.

Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Microbeam pull-in voltage topology optimization including material deposition constraint. Computer Methods in Applied Mechanics and Engineering, 197, 4040-4050. doi:10.1016/j.cma.2008.03.024

Peeters, M., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2008). Nonlinear Normal Modes, Part II: Practical Computation using Numerical Continuation Techniques. In 26th International Modal Analysis Conference, Orlando, 2008.

Peeters, M., Viguié, R., Serandour, G., Kerschen, G., & Golinval, J.-C. (2008). Computation of Nonlinear Normal Modes using Numerical Continuation Techniques. In International Confernce on Advanced Computational Methods in Engineering, Liège, 2008.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). Operational Modal Analysis using Second-Order Blind Identification. In 26th International Modal Analysis Conference, Orlando, 2008.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). In-orbit vibration testing of spacecraft structures. In International Conference on Noise and Vibration Engineering, Leuven, 2008.

Viguié, R., Peeters, M., Kerschen, G., & Golinval, J.-C. (2008). Vibration Mitigation of Nonlinear Vibrating Structures using Nonlinear Energy Sinks. In 26th International Modal Analysis Conference, Orlando, 2008.

Rochus, V., Golinval, J.-C., Mendez, C., Klapka, I., & Louis, C. (December 2007). Model of electrostatic actuated deformable mirror using strongly coupled electro-mechanical finite element. Analog Integrated Circuits and Signal Processing, 53 (2-3), 129-135. doi:10.1007/s10470-007-9066-4

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (May 2007). Topology optimization of microbeams including layer deposition manufacturing constraints [Paper presentation]. 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea.

Bolland, M., COLLIGNON, G., VANDENPLAS, X., Vueghs, P., Vandenrijt, J.-F., Kerschen, G., Bruls, O., Noels, L., Golinval, J.-C., Beckers, P., Rochus, P., & GRANVILLE, D. (2007). PARTICIPATION OF ULG STUDENTS TO THE SSETI MICROSATELLITE PROGRAMME USING SAMCEF [Paper presentation]. 10th SAMTECH Users Conference, Liège, Belgium.

Kerschen, G., Poncelet, F., Golinval, J.-C., Vakakis, A. F., & Bergman, L. A. (2007). Identification of Linear and Nonlinear Systems using Signal Processing Techniques. In 26th Benelux Meeting on Systems and Control, Lommel, 2007.

Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: Current Status and Future Directions. In 25th International Modal Analysis Conference, Orlando, 2007.

Peeters, M., Viguié, R., Kerschen, G., & Golinval, J.-C. (2007). Practical Computation of Nonlinear Normal Modes Using Numerical Continuation Techniques. In International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, 2007.

Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2007). Blind source separation techniques - Another way of doing operational modal analysis. In International Operational Modal Analysis Conference, Copenhague, 2007.

Poncelet, F., Kerschen, G., Golinval, J.-C., & Verlest, D. (2007). BLIND SOURCE SEPARATION TECHNIQUES FOR MODAL ANALYSIS: EXPERIMENTAL DEMONSTRATION. In International Conference on Engineering Dynamics, Carvoeiro, 2007.

Rochus, V., & Golinval, J.-C. (2007). Electro-mechanical Coupling in MEMS: Modeling and Experimental Validation [Paper presentation]. International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, China.

Viguié, R., Kerschen, G., Golinval, J.-C., Bergman, L. A., Vakakis, A. F., & van de Wouw, N. (2007). Using Targeted Energy Transfer to Stabilize Drill-string Systems. In 25th International Modal Analysis Conference, Orlando, 2007.

Worden, K., Kerschen, G., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: A Short (and Biased) History. In 25th International Modal Analysis Conference, Orlando, 2007.

Yan, A.-M., & Golinval, J.-C. (April 2006). Null subspace-based damage detection of structures using vibration measurements. Mechanical Systems and Signal Processing, 20 (3), 611-626. doi:10.1016/j.ymssp.2005.04.010

Lepage, S., & Golinval, J.-C. (2006). Modeling and Uncertainty Quantification of Thermoelastic Damping in Micro-Resonators [Paper presentation]. International Modal Analysis Conference (IMAC XXIV), St Louis, United States - Missouri.

Bolland, M., Collignon, G., Vandenplas, X., Kerschen, G., Vandenrijt, J.-F., Golinval, J.-C., Granville, D., & Rochus, P. (2006). PARTICIPATION OF UNDERGRADUATE STUDENTS TO THE SOLAR PANELS DESIGN OF THE EDUCATIONAL SPACECRAFT ESEO [Paper presentation]. Conf. de l'Association Aéronautique et Astronautique de France(AAAF), Paris, France.

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (2006). MAXIMIZATION OF PULL-IN VOLTAGE OF MICRO-ELECTROMECHANICAL STRUCTURES USING TOPOLOGY OPTIMIZATION [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States.

Lepage, S., Le Traon, O., KLapka, I., Masson, S., & Golinval, J.-C. (2006). THERMOELASTIC DAMPING IN VIBRATING BEAM ACCELEROMETER: A NEW THERMOELASTIC FINITE ELEMENT APPROACH [Paper presentation]. CANEUS 2006, Toulouse, France.

Peeters, M., Georgiades, F., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2006). Development of Numerical Algorithms for Practical Computation of Nonlinear Normal Modes. In International Conference on Noise and vibration Engineering, Leuven, 2006.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2006). Experimental modal analysis using blind source separation techniques. In International Conference on Noise and Vibration Engineering, Leuven, 2006.

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2006). Détection et localisation d’endommagements structuraux par la méthode des sous-espaces, le modèle de Kalman et la méthode d’analyse en composantes principales. Mécanique and Industries, 7, 365-372. doi:10.1051/meca:2006050

Lepage, S., & Golinval, J.-C. (2005). Modélisation par éléments finis du couplage thermo-élastique dans les structures vibrantes [Paper presentation]. 7ème Colloque National en Calcul des Structures, Giens, France.

Lepage, S., & Golinval, J.-C. (2005). Finite element modeling of the thermoelastic damping in micro-electromechanical systems [Paper presentation]. Third international conference on Advanced Computational Methods in Engineering (ACOMEN 2005), Ghent, Belgium.

Yan, A.-M., Golinval, J.-C., & Marin, F. (2005). Fault Detection Algorithm based on Null-Space Analysis for On-Line Structural Health Monitoring [Paper presentation]. International Modal Analysis Conference (IMAC XXIII), Orlando, United States - Florida.

Brasseur, M., De Boe, P., Golinval, J.-C., Tamaz, P., Caule, P., Embrechts, J.-J., & Nemerlin, J. (2004). Placement of Piezoelectric Laminate Actuator for Active Structural Acoustic Control [Paper presentation]. ISMA 2004, Leuven, Belgium.

Golinval, J.-C., De Boe, P., Yan, A. M., & Kerschen, G. (2004). Structural damage detection based on PCA of vibration measurements. In 58th Meeting of the Soc. for Mach. Failure Prevention Tech, Virginia Beach, 2004.

Kerschen, G., De Boe, P., Golinval, J.-C., & Worden, K. (2004). Sensor Validation for On-line Vibration Monitoring. In 2nd European Workshop on Structural Health Monitoring, Munich, 2004.

Kerschen, G., Lenaerts, V., Golinval, J.-C., & Feeny, B. F. (2004). Proper Orthogonal modes for the characterisation of nonlinear dynamic systems. In Euromech Colloquim on Nonlinear Modes of Vibrating Systems, Frejus, 2004.

Lejeune, J.-M., Rochus, V., & Golinval, J.-C. (2004). Finite element computation of electromechanical micro-switches and micro-pump actuators [Paper presentation]. 15th International Invitational Symposium on the Unification of Analytical, Computational, and Experimental Solution Methodologies, Springfield, United States - Massachusetts.

Yan, A. M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2004). Structural damage diagnosis under changing environmental conditions. In 7th International Conference on Motion and Vibration Control, Saint Louis, 2004.

Yan, A.-M., Marin, F., & Golinval, J.-C. (2004). Null-Subspace Analysis for Structural Damage Monitoring in Fatigue Testing of Luminaires [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 2004, Leuven, Belgium.

Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Wind Excitation and Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium.

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2003). Modeling of Electro-Mechanical Coupling Problem using the Finite Element Formulation [Paper presentation]. SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, United States.

De Boe, P., Yan, A.-M., & Golinval, J.-C. (2003). Substructure Damage Detection by Principal Component Analysis : Application to Environmental Vibration Testing [Paper presentation]. Fourth Workshop on Structural Health Monitoring, Stanford, United States - California.

Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Comparison of the Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. ASTELAB 2003, Paris, France.

SIMON, D., & Golinval, J.-C. (2003). Use of Whole-Field Displacement Measurements for Model Updating of Blades [Paper presentation]. Proceedings of IMAC XXI, Kissimmee, United States - Florida.

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural Integrity Monitoring by Vibration Measurements [Paper presentation]. Fracture Mechanics 2003, Shanghai, China.

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural integral monitoring by vibration measurements. FM2003 - Structural Integrity and Materials Aging, 363-370.

Yan, A.-M., & Golinval, J.-C. (2003). Model Updating Based on Frequency Response Functions Using A General Finite Element Code. European Journal of Mechanical and Environmental Engineering, 48 (3), 149-162.

Kerschen, G., Feeny, B. F., & Golinval, J.-C. (2002). On the exploitation of chaos to build reduced-order models. In International Conference on Noise and Vibration Engineering, Leuven, 2002.

Kerschen, G., & Golinval, J.-C. (2002). Feature extraction for non-linear model updating. In International Conference on Structural Dynamics Modelling, Funchal, 2002.

Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Finite Element Analysis of the Electro-Mechanical Coupling in MEMS [Paper presentation]. Proceedings of ACOMEN 2002, Liège, Belgium.

Kerschen, G., & Golinval, J.-C. (2002). Frequency domain approaches for the identification of an experimental beam with a local nonlinearity. In 20th International Modal Analysis Conference, Los Angeles, 2002.

Marin, F., Golinval, J.-C., & Marville, C. (2002). Accelerated Fatigue Testing Methodology of Luminaires on Electro-Dynamic Shaker [Paper presentation]. ACOMEN 2002, Liège, Belgium.

Pascual, R., Razeto, M., Golinval, J.-C., & Schalchli, R. (2002). A Robust FRF-based Technique for Model Updating [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Simon, D., & Golinval, J.-C. (2002). Finite Element Model Updating of Plate-like Structures Using Modal Holographic Measurement Field [Paper presentation]. International Congress on Quality Assessment of Numerical Simulations in Engineering (QUANSE 2002), Concepción, Chile.

Worden, K., Molina, F., Pascual, R., Golinval, J.-C., Maeck, J., & De Roeck, G. (2002). COST Action F3 on Structural Dynamics: Benchmarks for Structural Health Monitoring [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, conditionned reverse path method. In International Conference on Structural Systems Identification, Kassel, 2001.

Bodeux, J.-B., & Golinval, J.-C. (June 2001). Application of ARMAV models to identification and damage detection of mechanical and civil engineering structures. Smart Materials and Structures, 10 (3), 479-489. doi:10.1088/0964-1726/10/3/309

BODEUX, J.-B., & Golinval, J.-C. (2001). Modal Identification of the "Steel-Quake" Structure Using the Data-Driven Stochastic Subspace and ARMAV Methods [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany.

De Boe, P., & Golinval, J.-C. (2001). Damage Localisation Using Principal Component Analysis of Distributed Sensor Array [Paper presentation]. Third Workshop on Structural Health Monitoring, Stanford, United States - California.

Golinval, J.-C., & Argoul, P. (2001). COST F3 Structural Dynamics 1997-2001, Presentation and Some Preliminary Results [Paper presentation]. 3rd International Workshop on Structural Control, Paris, France.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Identification of wire rope isolators using the restoring force surface method. In International Conference on Structural Systems Identification, Kassel, 2001.

Lenaerts, V., Kerschen, G., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, proper othogonal decomposition. In International Conference on Structural Systems Identification, Kassel, 2001.

Thonon, C., & Golinval, J.-C. (2001). Finite Element Model Updating of the Garteur SM-AG19 Structure [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany.

BODEUX, J.-B., & Golinval, J.-C. (2000). ARMAV Model Technique for System Identification and Damage Detection [Paper presentation]. European COST F3 Conference on System Identification & Structural Health Monitoring, Madrid, Spain.

De Boe, P., & Golinval, J.-C. (2000). Identification of Electromechanical Coupling in Piezo-Structures [Paper presentation]. Seventh International Conference on Recent Advances in Structural Dynamics, Southampton, United Kingdom.

De Boe, P., & Golinval, J.-C. (2000). Actuator / Sensor Placement and Experimental Modal Analysis on Piezo-Structures [Paper presentation]. 5ème Congrès National de Mécanique Théorique et Appliquée, Louvain-la-Neuve, Belgium.

De Boe, P., Simon, D., & Golinval, J.-C. (2000). Strategies for Distributed Piezoelectric Actuator / Sensor Placement by Noise Effect Minimisation and Modal Controllability / Observability [Paper presentation]. ISMA25 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2000). Proper Orthogonal Decomposition and Model Reduction of Nonlinear Systems. In European Cost F3 Conference on system Identification & Structural Health Monitoring, Madrid, 2000.

Lenaerts, V., Kerschen, G., Trandafilova, I., Golinval, J.-C., Van Brussel, H., & Heylen, W. (2000). Detection, localisation and identification of nonlinearities in structural dynamics. In International Conference on noise and vibration Engineering, Leuven, 2000.

Lenearts, V., Kerschen, G., & Golinval, J.-C. (2000). Parameter identification of nolinear mechanical systems using POD. In 18th International Modal Analysis Conference, San Antonio, 2000.

Thonon, C., & Golinval, J.-C. (2000). Modal identification in presence of noise using an optimization approach [Paper presentation]. International Conference on Noise and Vibration Engineering (ISMA25), Leuven, Belgium.

Pascual, R., Trendafilova, I., Golinval, J.-C., & Heylen, W. (1999). Damage Detection Using Model Updating and Identification Techniques [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), United Kingdom.

Pascual, R., Golinval, J.-C., & RAZETO, M. (1999). On-line Damage Assessment Using Operating Deflection Shapes [Paper presentation]. 17th International Modal Analysis Conference (Proceedings of IMAC XVII), Kissimmee, Florida, United States.

Golinval, J.-C., & Géradin, M. (1999). Punch Press Vibration Isolation: a Case History. Revue-M. Mécanique, 44 (3), 141-145.

Lenaerts, V., Golinval, J.-C., Ruzzene, M., & Giorcelli, E. (1999). Experimental Validation of Two Nonlinear Identification Techniques on a Single Degree of Freedom System [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), Swansea, United Kingdom.

Simon, D., & Golinval, J.-C. (1999). Finite Element Model Updating Based On Holographic and Speckle Interferometry Measurements: Rapport VIA-25 [Paper presentation]. Photonics and Mechanics (PHOTOMEC/ETE'99), Liège, Belgium.

De Boe, P., Pascual, R., & Golinval, J.-C. (1998). Identification of the Mechanical and Piezoelectric Parameters of a Massively Piezoelectric Structure [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium.

Pascual, R., Golinval, J.-C., & Razeto, M. (1998). On the Reliability of Error Localization Indicators [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium.

Adam, O., Marin, F., Thonon, C., Essers, J.-A., Golinval, J.-C., & Léonard, O. (1998). Developpement d'une méthodologie d'optimisation aérodynamique et mécanique d'aubes de compresseurs. RFM: Revue Française de Mécanique, 4, 247-253.

Pascual, R., Golinval, J.-C., Berthillier, M., & Despres, T. (1998). Updating Industrial Models Under a General Optimization Environnment [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California.

Pascual, R., Golinval, J.-C., & Razeto, M. (1998). Model Updating Using Operating Deflection Shapes [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California.

Pascual, R., Golinval, J.-C., & Razeto, M. (1997). A Frequency Domain Correlation Technique for Model Correlation and Updating [Paper presentation]. 15th International Modal Analysis Conference (IMAC XV), Orlando, United States - Florida.

Simon, D., & Golinval, J.-C. (1996). Dynamic Stress and Fatigue Life Prediction Using Modal Testing and Model Correlation [Paper presentation]. International Modal Analysis Conference (IMAC XIV), Dearborn, United States - Michigan.

Slangen, P., Lion, Y., Golinval, J.-C., & Géradin, M. (1995). Modal Analysis of Plate Structures Using Digital Speckle Pattern Interferometry [Paper presentation]. International Modal Analysis Conference (IMAC XIII), Nashville, United States - Tennessee.

Chen, S. L., Golinval, J.-C., & Géradin, M. (1994). A Dynamic Stiffness-Transfer Matrix Method for Forced Response Analysis of One-Dimensional Structures. Journal of Modal Analysis, (Avril).

Razeto, M., Golinval, J.-C., & Géradin, M. (1994). Modal Identification and Determination of Effective Mass Using Environmental Vibration Testing on an Electro-dynamic Shaker. In Proceedings of the International Modal Analysis Conference (IMAC XII). Society of Experimental Mechanics, Inc.

Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Three dimensional turbine blade analysis in thermo-viscoplasticity. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57.

Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Analyse tridimensionnelle d'une aube de turbine en thermo-viscoplasticité. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57.