Publications and communications of Anne Habraken

Duchene, L., & Habraken, A. (2007). Multiscale Approaches. In F. Chinesta & E. Cueto, Advances in Material Forming - Esaform 10 years on (pp. 125-141). doi:10.1007/978-2-287-72143-4_8

Rojas Ulloa, C. E., Morch, H., Tuninetti, V., Duchene, L., & Habraken, A. (01 February 2024). Implementation of a modified Graham-Walles viscosity function within a Chaboche viscoplastic constitutive model. Computers and Mathematics with Applications, 155, 165-175. doi:10.1016/j.camwa.2023.12.002

Gallo, C., Duchene, L., Quy Duc Pham, T., Jardin, R., Tuninetti, V., & Habraken, A. (30 January 2024). Impact of Boundary Parameters Accuracy on Modeling of Directed Energy Deposition Thermal Field. Metals, 14 (2), 173. doi:10.3390/met14020173

Fetni, S., Delahaye, J., & Habraken, A. (September 2023). Python Data Driven framework for acceleration of Phase-Field simulations[Formula presented]. Software Impacts, 17, 100563. doi:10.1016/j.simpa.2023.100563

Tuninetti, V., Oñate, A., Valenzuela, M., Sepulveda, H., Pincheira, G., Medina, C., García-Herrera, C., Duchene, L., & Habraken, A. (September 2023). Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy. Journal of Materials Research and Technology, 26, 5028 - 5036. doi:10.1016/j.jmrt.2023.08.255

Jardin, R. T., Tuninetti, V., Tchuindjang, J. T., Duchene, L., Hashemi, S. N., Tran, H. S., Carrus, R., Mertens, A., & Habraken, A. (August 2023). Optimizing laser power of directed energy deposition process for homogeneous AISI M4 steel microstructure. Optics and Laser Technology, 163, 109426. doi:10.1016/j.optlastec.2023.109426

Rojas Ulloa, C. E., Tuninetti, V., Sepulveda, H., Betaieb, E., Pincheira, G., Gilles, G., Duchene, L., & Habraken, A. (2023). Accurate numerical prediction of ductile fracture and micromechanical damage evolution for Ti6Al4V alloy. Computational Mechanics. doi:10.1007/s00466-023-02362-3

Dashti, A., Keller, C., Vieille, B., Guillet, A., Gallo, C., Habraken, A., & Duchene, L. (2023). Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-11315-2

Tran, H. S., Bouffioux, C., Dedry, O., Rojas Ulloa, C. E., Duchene, L., Mertens, A., & Habraken, A. (2022). Identification of a soft matrix-hard inclusion material by indentation. International Journal of Mechanical Sciences, 107723. doi:10.1016/j.ijmecsci.2022.107723

Habraken, A., Aksen, T. A., Alves, J. L., Amaral, R. L., Betaieb, E., Chandola, N., Corallo, L., Cruz, D. J., Duchene, L., Engel, B., Esener, E., Firat, M., Frohn-Sörensen, P., Galán-López, J., Ghiabakloo, H., Kestens, L. A. I., Lian, J., Lingam, R., Liu, W., ... Vincze, G. (15 July 2022). Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations. International Journal of Material Forming, 15 (5), 61. doi:10.1007/s12289-022-01672-w

Pham Quy Duc, T., Truong Vinh Hoang, Xuan Van Tran, Quoc Tuan Pham, Seif Fetni, Duchene, L., Tran Son Hoang, & Habraken, A. (17 May 2022). Characterization, propagation, and sensitivity analysis of uncertainties in the directed energy deposition process using a deep learning-based surrogate model. Probabilistic Engineering Mechanics, 69, 103297. doi:10.1016/j.probengmech.2022.103297

Pham Quy Duc, T., Hoang, T. V., Van Tran, X., Tuan Pham, Q., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Fast and accurate prediction of temperature evolutions in additive manufacturing process using deep learning. Journal of Intelligent Manufacturing. doi:10.1007/s10845-021-01896-8

Tchuindjang, J. T., Paydas, H., Tran, H. S., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (31 May 2021). A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition. Materials, 14 (11), 2985. doi:10.3390/ma14112985

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Duchene, L., Mertens, A., & Habraken, A. (17 March 2021). Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design, 204 (109661). doi:10.1016/j.matdes.2021.109661

Morch, H., Duchene, L., Harzallah, R., Tuninetti, V., & Habraken, A. (January 2021). Efficient temperature dependence of parameters for thermo-mechanical finite element modeling of Alloy 230. European Journal of Mechanics. A, Solids, 85. doi:10.1016/j.euromechsol.2020.104116

Jardin Tome, R., Tuninetti, V., Tchuindjang, J. T., Hashemi, S. N., Carrus, R., Mertens, A., Duchene, L., Tran, H. S., & Habraken, A. (22 November 2020). Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals, 10 (2020), 1554. doi:10.3390/met10111554

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Jardin, R., Duchene, L., Mertens, A., & Habraken, A. (September 2020). 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing, 50 (86-92). doi:10.1016/j.promfg.2020.08.016

Tuninetti, V., Flores, P., Valenzuela, M., Pincheira, G., Medina, C., Duchene, L., & Habraken, A. (06 March 2020). Experimental characterization of the compressive mechanicalbehaviour of Ti6Al4V alloy at constant strain rates over the fullelastoplastic range. International Journal of Material Forming, 13 (709–724). doi:10.1007/s12289-020-01543-2

Tuninetti, V., Gilles, G., Flores, P., Pincheira, G., Duchene, L., & Habraken, A. (14 September 2019). Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy. Meccanica, 54 (11-12), 1823–1840. doi:10.1007/s11012-019-01051-x

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (01 February 2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45. doi:10.1016/j.matlet.2018.09.157

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2018). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures, 151, 45-56. doi:10.1016/j.ijsolstr.2017.04.013

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (July 2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9 (3), 259-434. doi:10.1007/s12289-014-1213-8

Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (June 2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations, 33 (5), 1388-1421. doi:10.1108/EC-06-2015-0172

Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017

Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (December 2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59. doi:10.1016/j.finel.2015.08.005

Balan, T., Lemoine, X., Maire, E., & Habraken, A. (2015). Implementation of a damage evolution law for dual-phase steels in Gurson-type models. Materials and Design, (88), 1213-1222. doi:10.1016/j.matdes.2015.09.075

HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (July 2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151. doi:10.1016/j.mechmat.2015.07.001

Tuninetti Vásquez, V., & Habraken, A. (2014). Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6A1-4V alloy. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, (605), 39-50. doi:10.1016/j.msea.2014.03.009

Guzmán Inostroza, C. F., & Habraken, A. (2013). Towards fracture prediction in single point incremental forming. Key Engineering Materials, 554-557, 2355-2362. doi:10.4028/www.scientific.net/KEM.554-557.2355

Guzmán Inostroza, C. F., Gu, J., Duflou, J., Vanhove, H., Flores, P., & Habraken, A. (31 July 2012). Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations. International Journal of Solids and Structures, 49 (25), 3594-3604. doi:10.1016/j.ijsolstr.2012.07.016

Keller, C., Habraken, A., & Duchene, L. (July 2012). Finite element investigation of size effects on the mechanical behavior of nickel single crystals. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 550 (30), 342-349. doi:10.1016/j.msea.2012.04.085

Ben bettaieb, M., Lenain, A., & Habraken, A. (2012). Static and fatigue characterization of the Ti5553 titanium alloy. Fatigue and Fracture of Engineering Materials and Structures, (36), 401-415.

Rah, K., Van Paepegem, W., Habraken, A., & Degrieck, J. (2011). A partial hybrid stress solid-shell element for the analysis of laminated composites. Computer Methods in Applied Mechanics and Engineering, 200 (49-52), 3526–3539. doi:10.1016/j.cma.2011.08.020

Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clément, N., Diarra, H., & Habraken, A. (2009). Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553. Acta Materialia, (57), 5186 - 5195. doi:10.1016/j.actamat.2009.07.020

Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040. doi:10.1016/j.ijfatigue.2009.03.003

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2008). Study of bendability of steel sheets. Steel Research International, (79/1), 225-232.

Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427. doi:10.1016/j.ijplas.2007.03.015

Duflou, J. R., Verbert, J., Belkassem, B., Gu, J., Sol, H., Henrard, C., & Habraken, A. (2008). Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Annals - Manufacturing Technology, (57), 253-256. doi:10.1016/j.cirp.2008.03.030

Castagne, S., Talamona, D., & Habraken, A. (2007). A damage constitutive law for steel elevated temperature. Identification of the parameters. International Journal of Material Processing, (1), 23-43.

Duchene, L., El Houdaigui, F., & Habraken, A. (2007). Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity, 23 (8), 1417-1438. doi:10.1016/j.ijplas.2007.01.008

Flores, P., Bonnet, F., & Habraken, A. (2007). Plane strain test for metal sheet characterization. Key Engineering Materials, 344, 135-142. doi:10.4028/0-87849-437-5.135

Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23 (3), 420-449. doi:10.1016/j.ijplas.2006.05.006

Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26. doi:10.1016/j.jmatprotec.2006.10.044

Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502. doi:10.4028/0-87849-437-5.495

Pascon, F., & Habraken, A. (2007). Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs. Computer Methods in Applied Mechanics and Engineering, 196, 2285-5599. doi:10.1016/j.cma.2006.07.017

Poortmans, S., Boubakar, D., Habraken, A., & Verlinden, B. (2007). Correcting tensile test results of ECAE-deformed aluminium. Scripta Materialia, 56 (9), 749-752. doi:10.1016/j.scriptamat.2007.01.018

Schwartz, R., Castagne, S., & Habraken, A. (2007). Numerical study to identify the material parameters of a damage model. Computer Methods in Materials Science, 7 (2), 237-242.

He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., & Habraken, A. (2006). An FEM-aided investigation of the deformation during single point incremental forming. Modelling and Simulation in Materials Science and Engineering.

Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., & Habraken, A. (2006). Quality assessment of speckle patterns for digital image correlation. Optics and Lasers in Engineering, 44 (11), 1132-1145. doi:10.1016/j.optlaseng.2005.10.004

Lecomte-Beckers, J., Moureaux, P., Carton, M., & Habraken, A. (2006). Characterization of Duplex steel Uranus 76N during deformation and heat treatment. Physica Status Solidi A. Applications and Materials Science, 203 (15), 3651-3664. doi:10.1002/pssa.200621200

Casotto, S., Pascon, F., Habraken, A., & Bruschi, S. (2005). Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. International Journal of Machine Tools and Manufacture, 45 (6), 657-664. doi:10.1016/j.ijmachtools.2004.10.007

Duchene, L., & Habraken, A. (2005). Analysis of the sensivity of FEM predictions to numerical parameters in deep drawing simulations. European Journal of Mechanics. A, Solids, (24), 614-629. doi:10.1016/j.euromechsol.2005.04.007

He, S., Van Bael, A., Van Houtte, P., Szekeres, A., Duflou, J., Henrard, C., & Habraken, A. (2005). Finite element modeling of incremental forming of aluminium sheets. Advanced Materials Research, 6/8, 525-532. doi:10.4028/0-87849-972-5.525

Henrard, C., Habraken, A., Szekeres, A., Duflou, J., He, S., Van Bael, A., & Van Houtte, P. (2005). Comparison of FEM simulations for the incremental forming process. Advanced Materials Research, 6-8, 533-542. doi:10.4028/0-87849-972-5.533

Pietrapertosa, C., Habraken, A., & Jaspart, J.-P. (2005). Modélisation du comportement (clinchage des tôles minces). Techniques de l'ingénieur, 4 (BM 7 820), 1-8.

Castagne, S., Pascon, F., Blès, G., & Habraken, A. (2004). Developments in finite element simulations of continuous casting. Journal de Physique IV, 120, 447-455. doi:10.1051/jp4:2004120051

Habraken, A., & Duchene, L. (2004). Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity, 20 (Issue 8-9), 1525-1560. doi:10.1016/j.ijplas.2003.11.006

Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463.

Castagne, S., Habraken, A., & Cescotto, S. (2003). Application of a damage model to an aluminium alloy. International Journal of Damage Mechanics, 12 (1), 5-30. doi:10.1177/1056789503012001001

Castagne, S., Remy, M., & Habraken, A. (2003). Development of a Mesoscopic Cell Modeling the Damage Process in Steel at Elevated Temperature. Key Engineering Materials, 233-236, 145-150.

Remy, M., Castagne, S., & Habraken, A. (September 2002). Progress in microscopic modeling of damage in steel at high temperature. International Journal of Forming Processes, 5 (N°2-3-4/2002), 445-455.

Drean, M., Habraken, A., Bouchaïr, A., & Muzeau, J.-P. (2002). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. Computers and Structures, 80, 2361-2373. doi:10.1016/S0045-7949(02)00240-7

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Texture evolution during deep-drawing processes. Journal of Materials Processing Technology, 125-126, 110-118. doi:10.1016/S0924-0136(02)00331-X

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (December 2000). Modélisation des phénomènes thermomécaniques dans une lingotière de coulée continue. Mécanique and Industries, 1, 61-70. doi:10.1016/s1296-2139(00)00107-x

Mosbah, P., Shima, S., Habraken, A., & Charlier, R. (1999). Numerical simulation of compacting process of a multi-stepped part – Comparison with experiments. Journal of the Japan Society of Powder and Powder Metallurgy, 46, 696-704. doi:10.2497/jjspm.46.696

Charlier, R., & Habraken, A. (1990). Numerical Modelisation of Contact with Friction Phenomena by the Finite Element Method. Computers and Geotechnics, 9 (n°1&2), 59-72.

Delahaye, J., Habraken, A., & Mertens, A. (2023). 2D FE Modeling of the Thermal History of the Heat Affected Zone in AlSi10Mg LPBF. In L. Madej, M. Sitko, ... K. Perzynski (Eds.), Material Forming - The 26th International ESAFORM Conference on Material Forming , Esaform 2023 (pp. 189-198). Millersville, United States - Pennsylvania: Materials Research Forum. doi:10.21741/9781644902479-21

Oliveira, M. C., Cazacu, O., Revil-Baudard, B., Neto, D. M., Frohn-Sörensen, P., Ma, J., Liu, W., Cruz, D. J., Santos, A. D., VAN BAEL, A., Ghiabakloo, H., & Habraken, A. (2023). ESAFORM 2021 cup drawing benchmark of an Al alloy: Critical follow up analysis of its potentials. In L. Madej, M. Sitko, ... K. Perzynsk (Eds.), Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023 (pp. 1491-1502). Association of American Publishers. doi:10.21741/9781644902479-161

Pham Quy Duc, T., Hoang, T. V., Tran, X. V., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Uncertainty Quantification in the Directed Energy Deposition Process Using Deep Learning-Based Probabilistic Approach. In G. Vincze & F. Barlat (Eds.), Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Trans Tech Publications Ltd. doi:10.4028/p-j9chvq

Rojas-Ulloa, C., Valenzuela, M., Tuninetti, V., & Habraken, A. (06 May 2021). Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti–6Al–4V specimens exhibiting positive stress triaxialities. Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Applications, 108 (2). doi:10.1177/14644207211009933

Pham Quy Duc, T., Vinh Hoang, T., Tuan Pham, Q., Phuc Huynh, T., Xuan Tran, V., El Fetni, S., Tran, H. S., & Habraken, A. (2021). Data-driven Prediction of Temperature Evolution in Metallic Additive Manufacturing Process. In A. Habraken, L. Duchêne, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liege, Belgium: PoPuPs. doi:10.25518/esaform21.2599

Vincze, G., & Habraken, A. (2021). EXACT - the ESAFORM Benchmark 2021. In A. Habraken, L. Duchene, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liege, Belgium: PoPuPs. doi:10.25518/esaform21.4783

El Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2021). Thermal field prediction in DED manufacturing process using Artificial Neural Network. In A. Habraken, L. Duchene, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2812

Dedry, O., Bouffioux, C., Tran, H. S., Santos Macías, J. G., Habraken, A., & Mertens, A. (2021). Identification of AlSi10Mg matrix behavior by nanoindentation. In 24th International Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2464

Mertens, A., Delahaye, J., Dedry, O., Vertruyen, B., Tchuindjang, J. T., & Habraken, A. (26 April 2020). Microstructure and properties of SLM AlSi10Mg: Understanding the influence of the local thermal history. Procedia Manufacturing, 47, 1089-1095. doi:10.1016/j.promfg.2020.04.121

Tran, H. S., Castiaux, E., & Habraken, A. (April 2020). Thermal Analysis of Solidifying Steel Shell in Continuous Casting Process. Procedia Manufacturing, 47, 686-692. doi:10.1016/j.promfg.2020.04.210

Tran, H. S., Castiaux, E., & Habraken, A. (2020). 2D thermal finite element analysis of sticker breakout in continuous casting. Procedia Manufacturing, 50, 376-383. doi:10.1016/j.promfg.2020.08.069

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Mertens, A., Habraken, A., & Tran, H. S. (2019). Numerical analysis of thermal stress in laser cladding technology of M4 High Speed Steel. In Y. Korkolis, B. Kinsey, M. Knezevic, ... Padhye, Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes.

Tuninetti, V., Flores, P., Medina, C., Duchene, L., & Habraken, A. (2019). Effect of small strain rate variations on the identification of the compressive behaviour of Ti6Al4V. In Proceedings of Giens 2019.

Betaieb, E., Yuan, S., Guzman, C. F., Duchene, L., & Habraken, A. (16 April 2019). Prediction of cracks within cones processed by single point incremental forming. Procedia Manufacturing, 29 (2019), 96-104. doi:10.1016/j.promfg.2019.02.111

Morch, H., Duchene, L., & Habraken, A. (August 2018). Identification method of an advanced constitutive law for nickel-based alloy Haynes 230 used in solar receivers. Journal of Physics. Conference Series, 1063. doi:10.1088/1742-6596/1063/1/012149

Yuan, S., Duchene, L., Milis, O., Keller, C., Hug, E., & Habraken, A. (July 2018). A Novel Geometry for Shear Test Using Axial Tensile Setup. Proceedings, 2. doi:10.3390/ICEM18-05277

Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. In Proceedings of the XIV International Conference on Computational Plasticity.

Guzmán Inostroza, C. F., Tuninetti, V., Gilles, G., & Habraken, A. (April 2015). Assessment of damage and anisotropic plasticity models to predict Ti-6Al-4V behavior. Key Engineering Materials, 651-653, 575-580. doi:10.4028/www.scientific.net/KEM.651-653.575

Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. In Incremental sheet forming.

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. In Incremental sheet forming.

Duchene, L., Ben Bettaieb, A., Tuninetti Vásquez, V., & Habraken, A. (2013). Numerical modeling and digital image correlation strain measurements of coated metal sheets submitted to large bending deformation. In Proceedings of the 16th ESAFORM conference on Material Forming.

Tuninetti Vásquez, V., Gilles, G., Milis, O., Neira Torres, I., & Habraken, A. (2013). QUASI-STATIC MECHANICAL BEHAVIOUR OF TI-6AL-4V ALLOY AT ROOM TEMPERATURE. Complas XII, XII, 51-62.

Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156. doi:10.1063/1.3589507

Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (June 2010). Modeling the vertical spincasting of large bimetallic rolling mill rolls. Key Engineering Materials, 443, 15-20. doi:10.4028/www.scientific.net/KEM.443.15

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). The Role of Void Evolution on the bendability of Steel Sheets. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Hammami, W., Bouvier, S., Duchene, L., Delannay, L., & Habraken, A. (2009). Crystal Plasticity Modelling of Monotonic Shear Tests on Pure Titanium. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (August 2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2 (Supplément 1), 65 - 68. doi:10.1007/s12289-009-0573-y

Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N. Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144).

Duchene, L., Geers, M. G. D., Brekelmans, W. A. M., Chen, E., Verlinden, B., & Habraken, A. (2008). Multiscale modeling of equal channel angular extruded aluminium with strain gradient crystal plasticity and phenomenological models. In A. Rollett (Ed.), Proceedings of the 15th International Conference on the Texture of Materials (ICOTOM-15).

Habraken, A., Gerday, A.-F., & Duchene, L. (2008). Multiscale finite element study of Ti-555. In Akhtar S. Khan, Babak Farrokh, M. Baig, A. Pandey, C. Meredith, S. Yu, ... H. Liu (Eds.), Proceedings of the 14th International Symposium on Plasticity & Its Current Applications, Mechanics & Mechanisms of Finite Plastic Deformation (pp. 265-267). Neat Press.

Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H. Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH.

Studer, L., Detrembleur, S., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2008). Modelling the vertical spincasting of large bimettalic rolling mill rolls. In Proceedings of the Second International Conference on Advances in Solidification Processes (ICASP-2).

Verbert, J., Belkassem, B., Henrard, C., Habraken, A., Gu, J., Sol, H., & Duflou, J. R. (2008). Multi-Step toolpath approach to overcome forming limitations in single point incremental forming. In P. Boisse, Proceedings of the 11th International ESAFORM Conference on Material Forming (pp. 587-590). Springer. doi:10.1007/s12289-008-0157-2

Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M. Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference.

Bouvier, S., Alves, L., & Habraken, A. (2007). Strategy of material parameters identification for non linear mechanical behavior: sensitivity of FE computation. In E. Cueto & C. Francisco, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 94-99). doi:10.1063/1.2729494

Duchene, L., Diouf, B., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2007). Study of axes rotation during simple shear tests on aluminium sheets. In J. M. A. César de Sa & A. D. Santos (Eds.), Proceedings of the 9th International Conference NUMIFORM 2007 (AIP Conference Proceedings 908, pp. 399-404).

Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2007). Inverse modelling of nanoindentation tests to identify Ti-555 behaviour. In Proceedings of the 11th world conference on titanium. Japan Institute of Metals.

Habraken, A., Gerday, A.-F., Diouf, B., & Duchene, L. (2007). Comparisons of FEM approaches modelling the metal plastic behaviour. In E. Cueto & F. Chinesta, Proceedings of the 10th ESAFORM Conference on Material Forming (pp. 1478-1483). Springer. doi:10.1063/1.2729724

Rossi, B., Habraken, A., & Pascon, F. (2007). On the evaluation of the through thickness residual stresses distribution of cold formed profiles. In 10th International ESAFORM Conference on Material Forming : ESAFORM, Zaragoza, 18-20 April 2007 (pp. 570-577).

Studer, L., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2007). Modelling the vertical centrifugal casting of large bimetallic rolling mills. In E. Onate, M. Papadrakis, ... B. Schrefler (Eds.), Proceedings of the Conference of Computational Methods for Coupled Problems in Science and Engineering 2 (pp. 141-144). Barcelona, Spain: CIMNE.

Van Bael, A., Eyckens, P., He, S., Bouffioux, C., Henrard, C., Habraken, A., Duflou, J., & Van Houtte, P. (2007). Forming limit predictions for single-point incremental sheet metal forming. In E. Cueto & F. Chinesta, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 309-314). Springer.

Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D. Santos & A. Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).

Diouf, B., El Houdaigui, F., Poortmans, S., Verlinden, B., & Habraken, A. (2006). A phenomenological model to simulate mechanical tests on ultrafine-grained aluminium produced by ECAE. In C. A. Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dordrecht, Netherlands: Springer.

Duchene, L., de Montleau, P., & Habraken, A. (2006). Development and performance assessment of an improved 8-node mixed type FEM element. In N. Juster & A. Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 135-138). Krakow, Poland: Akapit.

Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2006). Finite element simulations of nanoindentation in beta metastable Ti alloys. In N. Juster & A. Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 187-190). Krakow, Poland: Akapit.

Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., & Habraken, A. (2006). Identification of hardening behavior using inverse modeling and image correlation. In Proceedings of the SEM annual conference and exposition 2006.

Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., Rabet, L., & Habraken, A. (2006). Identification of yield locus parameters of metals using inverse modeling and full field DIC. In Proceedings of the 7th national congress on theoretical and applied mechanics.

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Comparison between homogeneous and heterogeneous field information for plastic material identification. In M. Grédiac & J. Huntley (Eds.), Proceedings of Photomecanics Conference 2006 (pp. 71-72).

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Analysis of speckle patterns for deformation measurements by DIC. In P. Slangen & C. Cerruti (Eds.), Proceedings of SPIE Vol. 6341 (pp. 1-E6).

Lelotte, T., Delannay, L., & Habraken, A. (2006). Prediction of deformation textures in zirconium based on a simplified modelling of grain interaction. In A. S. Khan (Ed.), Proceedings of the Plasticity Conference 2006. NEAT Press.

Lelotte, T., Duchene, L., & Habraken, A. (2006). Fast method to predict an earing profile based on Lankford coefficients and yield locus. In C. A. Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dodrecht, Netherlands: Springer.

Lequesne, C., Plumier, A., Degée, H., & Habraken, A. (2006). Numerical study of the fatigue crack in welded beam-to-column connection using cohesive zone model. In Proceedings of the International Conference on Fracture and Damage Mechanics V (pp. 847-850). Uetikon-Zuerich, Switzerland: Trans Tech Publications.

Poortmans, S., El Houdaigui, F., Habraken, A., & Verlinden, B. (2006). Inhomogeneous and anisotropic deformation behavior and strain hardening of ultrafine-grained aluminium by ECAP. In Y. T. Zhu, T. G. Langdon, Z. Horita, M. J. Zehetbauer, S. L. Semiatin, ... T. C. Lowe (Eds.), Proceedings of the Ultrafine Grained Materials IV Conference (pp. 389-394). London, United Kingdom: Academic Press.

Rosso, V., Zhang, L., Michel, F., Renotte, Y., Lion, Y., & Habraken, A. (2006). Out-of-plane displacement derivative measurement: comparison of results obtained by a shearographic interferometer using the separation of the polarization states and the finite element method. In P. Mathieu (Ed.), Proceedings of Photonics North Conference 2006.

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D. Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Romania: The publishing House of the Romanian Academy.

Casotto, S., Bruschi, S., Pascon, F., & Habraken, A. (2005). Development of a neural network to predict the final geometry of forged rings after cooling. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 2) (pp. 855-858). The publishing House of the Romanian Academy.

Castagne, S., & Habraken, A. (2005). Identification of the parameters of a damage constitutive law for steel at elevated temperature. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 29-32). The publishing House of the Romanian Academy.

Duchene, L., de Montleau, P., El Houdaigui, F., Bouvier, S., & Habraken, A. (2005). Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology, NUMISHEET 2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Conference proceedings, Vol 778, pp. 409-414). Melville (New York), United States: American Institue of Physics (AIP).

Duchene, L., El Houdaigui, F., & Habraken, A. (2005). Finite element simulations of the swift effect. In P. F. Bariani (Ed.), Proceedings of the ICTP 2005 International Conference on Technology of Plasticity.

El Houdaigui, F., Duchene, L., Habraken, A., Poortmans, S., & Verlinden, B. (2005). Anisotropic yield locus of ultrafine-grained aluminium produced by Equal Channel angular extrusion. In E. Onate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII) (pp. 1170-1173).

Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), United States: American Institute of Physics (AIP).

Flores, P., Moureaux, P., & Habraken, A. (2005). Material Identification Using a Bi-Axial Test Machine. In Proceedings of the International Conference on Advances in Experimental Mechanics.

He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., Henrard, C., Bouffioux, C., & Habraken, A. (2005). Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 711-714). The publishing House of the Romanian Academy.

Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy.

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2005). Identification of elastic orthotropic material parameters by inverse modeling using ESPI. In Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental and Applied Mechanics.

Lelotte, T., Gerday, A.-F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A., & Duchene, L. (2005). Axes rotation during simple shear test: Measurement and predictions. In E. Oñate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII).

Lequesne, C., Gerday, A.-F., Plumier, A., & Habraken, A. (2005). Modeling of the fatigue cracks in welded beam-to-column connection of steel moment frame buildings submitted to earthquake. In M. H. Aliabadi, J. Planas, F.-G. Buchholz, B. Abersek, J. Alfaiate, ... S. I. Nishida (Eds.), Proceedings of the 4th International Conference on Fracture and Damage Mechanics (pp. 233-238).

Lequesne, C., Plumier, A., & Habraken, A. (2005). Modélisation de la fissuration par fatigue des connexions poutres-colonnes de grands bâtiments en armature en acier lors de tremblements de terre. In Proceedings of the XVIIème congrès français de mécanique (CFM 2005).

Pascon, F., Pecquet, E., Zhang, L., & Habraken, A. (2005). Modelling of semi-continuous casting of cupro-nickel alloys. In M. Papadrakakis, E. Onate, ... B. Schrefler (Eds.), Proceedings of the International Conference on Computational Methods for Coupled Problems in Science and Engineering.

Watzeels, K., Tunckol, Y., Henrard, C., Gu, J., Sol, H., Duflou, J., & Habraken, A. (2005). Experimental validation of the finite element simulation of the first stroke in single point incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 703-706). The publishing House of the Romanian Academy.

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S. Gosh, J. M. Castro, ... J. K. Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings.

Castagne, S., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2004). Mesoscopic model of intergranular cracks in low carbon steel during cooling of continuous casting. In M. Lamberigts, Proceedings of the 2nd international conference of thermomechanical processing of steels (TMP 2004) (pp. 233-240). Liège, Belgium: Stahl Eisen.

de Montleau, P., Duchene, L., Bouvier, S., Flores, P., & Habraken, A. (2004). Deep drawing process with different elasto-plastic law. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Material Forming (pp. 163-166). Norwegian University of Sciences and Technology.

Duchene, L., de Montleau, P., Bouvier, S., & Habraken, A. (2004). Deep drawing simulations with different polycrystalline models. In S. Gosh, J. M. Castro, ... J. K. Lee (Eds.), Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 588-593). American Institute of Physics AIP Conference Proceedings.

Duchene, L., Delannay, L., & Habraken, A. (2004). Finite element prediction of the swift effect based on Taylor-type polycrystal plasticity models. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 171-174). Norwegian University of Sciences and Technology.

Flores, P., de Montleau, P., Mathonet, V., Moureaux, P., & Habraken, A. (2004). Identification of material parameters using bi-axial machine. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 237-240). Norwegian University of Sciences and Technology.

Mathonet, V., Degée, H., Habraken, A., Tossings, P., & Delhez, E. (2004). Structural optimisation of steel frames for industrial applications. In Proceedings of the Inverse Problems Design and Optimization Symposium.

Pecquet, E., Volles, R., Lecomte-Beckers, J., & Habraken, A. (2004). Lingopti project: semi-continuous casting process of copper-nickel alloys. In Proceedings of the 21st International Congress of Theoritical and Applied Mechanics.

Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C. Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.

Castagne, S., & Habraken, A. (2003). Investigation of transverse cracks initiation in continuous steel casting using a finite element approach. In Advances in Computational & Experimental Engineering. C.A. He & Sciences.

Castagne, S., Pascon, F., Bles, G., & Habraken, A. (2003). Developments in finite element simulations of continuous casting. In Proceedings of the 2nd International Conference on Thermal Process Modelling and Computer Simulations (ICTPMCS).

Castagne, S., Pascon, F., Miesse, G., & Habraken, A. (2003). Finite element analysis of continuous steel casting. In Proceedings of the First International Conference Finite element for process analysis.

Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P. Iu, L. N. Lamas, Y. P. Li, ... K. M. Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse, Netherlands: Swets & Zeitlinger.

de Montleau, P., Duchene, L., Flores, P., & Habraken, A. (2003). Numerical shear tests for different elasto-plastic laws. In E. Onate & D. R. J. Owen, Proceedings of the VII International Conference on Computational Plasticity (COMPLAS 2003). Barcelona, Spain: CIMNE.

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2003). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. Journal de Physique IV, 105. doi:10.1051/jp4:20030191

Flores, P., De Montleau, P., Habraken, A., & Mathonet, V. (2003). Simulations numériques d'essais de cisaillement simple. In 16ème Congrès fançais de Mécanique.

Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. In Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.

Pascon, F., & Habraken, A. (2003). 2D1/2 thermo-mechanical model of continuous casting using FEM. In V. Brucato (Ed.), Proceedings of the 6th International ESAFORM Conference on Material Forming. Nuova Ipsa editore.

Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E. Dick, J. Vierendeels, F. Cantrijn, G. Campion, ... C. Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics.

Pietrapertosa, C., Zhang, L., Habraken, A., & Jaspart, J.-P. (2003). Clinching joining system: validation of numerical models. In V. Brucato, Proceedings of the 6th International ESAFORM Conference on Material Forming (pp. 351-354). Salerno, Italy: Nuova Ipsa editire.

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. In S. Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6) Non Linear Mechanics of Anisotropic Materials (pp. 337-344).

Flores, P., Duchene, L., & Habraken, A. (2002). Texture analysis of cylindrical cup during deep-drawing process. In D. Y. Yang, S. I. Oh, H. Huh, ... Y. H. Kim, Proceedings of the 5th international conference NUMISHEET 2002 (pp. 605-610).

Hubsch, P., Bourdouxhe, M., Pascon, F., & Habraken, A. (2002). Numerical simulation of the solidification of a beam blank in the mould. In Proceedings of the 4th European Continuous Casting Conference (pp. 421-428). Birmingham, United States - Alabama: IOM Communications.

Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). Acceleration of finite element analysis by parallel processing. In M. Pietrzyk, Z. Mitura, ... J. Kaczmar (Eds.), Proceedings of the 5th international ESAFORM Conference on Material Forming (pp. 47-50). Kraków, Poland: Akapit.

Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). A parallel computing model for the acceleration of a finite element software. In H. R. Arabnia, Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications (pp. 185-191). CSREA Press.

Pascon, F., & Habraken, A. (2002). Finite element thermo-mechanical model of continuous steel casting. In M. Kiuchi, H. Nishimura, ... J. Yanagimoto, Proceedings of the 7th International Conference on Advanced Technology of Plasticity.

Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Modelling of the micro-mechanical behaviour of steel sheets during deep-drawing. In J. R. Duflou, M. Geiger, H. J. J. Kals, B. Shirvani, ... U. P. Singh, Proceedings of the 9th International Conference on Sheet Metal (pp. 631-638).

Duchene, L., Habraken, A., & Godinas, A. (2001). Influence of steel anisotropy during deep-drawing process. In A. Habraken, Proceedings of the 4th international Conference ESAFORM (pp. 461-464).

Duchene, L., Habraken, A., & Godinas, A. (2001). Implementation of a texture based interpolated yield locus in a FEM code. In Balkema, Proceedings of NUMIFORM 2001 (Simulation of Materials Processing: Theory, Methods and Applications) (pp. 203-208). Tokyo, Japan: Mori Editor.

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modelling of thermo-mechanical behaviour of a steel strand in continuous casting. In Proceedings of the 7th European Conference on Advanced Materials and processes (Euromat 2001).

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modeling of thermo-mechanical behaviour of a steel strand in continuous casting. In A. Habraken, Proceedings of the 4th International Conference ESAFORM (pp. 867-870).

Castagne, S., Charles, J.-F., Habraken, A., Zhang, L., Gaspard, M., & Batazzi, D. (2000). Numerical Modelling of the Forging Process of Rolls for Rolling Mills. In Proceedings of the 2nd International Conference on forging and related technology.

Castagne, S., & Habraken, A. (2000). Development of a microscopic damage model for steel at high temperature. In Proceedings of the 5ème congrès national belge, Mécanique théorique et appliquée (pp. 175-178).

Charles, J.-F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. In M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, ... I. Pillinger, Proceedings of the 8th International Conference on Metal Forming (pp. 625-631).

Charles, J. F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. In Proceedings of the 5ème Congrès national belge, Mecanique théorique et appliquée (pp. 243-246).

Dréan, M., Habraken, A., Bouchaïr, A., & Muzeau, J. P. (2000). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. In M. Iványi, J.-P. Muzeau, ... B. H. V. Topping, Computational Steel Structures Technology (pp. 87-97). Edinburgh, United Kingdom: CIVIL-COMP LTD.

Duchene, L., Habraken, A., & Godinas, A. (2000). Validation of a FEM model coupled with texture applied to deep drawing process. In Proceedings of the 3rd ESAFORM Conference on Material Forming (pp. 3 à IV-6). Stuttgart, Germany: Frits Editor.

Habraken, A., Zhang, L., Wang, X. C., & Cescotto, S. (2000). A new elastic-visco-plastic damage model for annealed aluminium: theory, calibration and validation. In A. Benallal, Proceedings of the Continuous Damage and Fracture Symposium (pp. 341-352). France: Elsevier.

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermomechanical model of the behaviour of a strand in continuous steel casting using finite element method. In Proceedings of the 5ème Congrès national belge, Mécanique théorique et appliquée (pp. 239-242).

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermo-mechanical model of a strand in the mould of a continuous casting plant. In Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000) (pp. 15).

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials. In J. L. Tassoulas (Ed.), Proceedings of the 14th Engineering Mechanics Conference (pp. 6).

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials [Paper presentation]. 3rd ESAFORM Conference on Material Forming, Stuttgart, Germany.

Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1999). Integration of recrystallisation model coupled with an elasto-visco-plastic law - Experimental tests and calibration of this model. In Proceedings of the 2nd ESAFORM Conference on Material Forming (pp. 529-532).

Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal.

Tran Hoang, S., Bouffioux, C., Dedry, O., Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (04 April 2022). Prediction of static properties of LPBFAlSi10Mg samples post-treated by Friction Stir Processing or thermal treatments [Paper presentation]. EMMC18 – 18th European Mechanics of Materials Conference.

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (28 February 2022). Adaptive time stepping approach for Phase-Field modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021 - XVI International Conference on Computational Plasticity, Barcelone, Spain. doi:10.23967/complas.2021.009

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (07 September 2021). Presentation: Adaptive time stepping approach for Phase-F1ield modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021, Barcelona, Spain.

Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (03 June 2021). How finite element simulations and phase field method interact to predict material properties of additive manufacturing samples [Paper presentation]. Sixth International Conference on Research in Intelligent Computing in Engineering (RICE-2021), Online, Vietnam.

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (25 April 2018). 2D FE Simulations of High Speed Steel Laser Cladding Process [Paper presentation]. ESAFORM, Palermo, Italy.

Tran, H. S., Tchuindjang, J. T., Paydas, H., Tomé Jardin, R. A., Carrus, R., Mertens, A., & Habraken, A. (28 March 2018). Predicted microstructure in repair technology of Ti-6Al-4V [Paper presentation]. 16th edition of the European Mechanics of Material Conference, Nantes, France.