[en] The present paper deals with the fast multipole acceleration of the 2D finite element-boundary element modelling of electromechanical devices. It is shown that the fast multipole method, usually applied to large 3D problems, can also lead to a reduction in computational time when dealing with relatively small 2D problems, provided that an adaptive truncation scheme for the expansion of the 2D Laplace Green function is used. As an application example, the 2D hybrid modelling of a linear actuator is studied, taking into account saturation, the voltage supply and the mechanical equation. The computational cost without and with fast multipole acceleration is discussed for both the Linear and nonlinear case.
Disciplines :
Ingénierie électrique & électronique
Auteur, co-auteur :
V Sabariego, Ruth ; Université de Liège - ULiège > Dép. d'électric., électron. et informat. (Inst.Montefiore) > Applied and Computational Electromagnetics (ACE)
Gyselinck, J.
Geuzaine, Christophe ; Université de Liège - ULiège > Dép. d'électric., électron. et informat. (Inst.Montefiore) > Applied and Computational Electromagnetics (ACE)
Dular, Patrick ; Université de Liège - ULiège > Dép. d'électric., électron. et informat. (Inst.Montefiore) > Applied and Computational Electromagnetics (ACE)
Legros, Willy ; Université de Liège - ULiège > Dép. d'électric., électron. et informat. (Inst.Montefiore) > Dép. d'électric., électron. et informat. (Inst.Montefiore)
Langue du document :
Anglais
Titre :
Application of the fast multipole method to the 2D finite element-boundary element analysis of electromechanical devices
Date de publication/diffusion :
2003
Titre du périodique :
COMPEL
ISSN :
0332-1649
eISSN :
2054-5606
Maison d'édition :
Emerald Group Publishing Limited, Bradford, Royaume-Uni
Buchau, A., Huber, C.J., Rieger, W. and Rucker, W.M. (2000), "Fast BEM computations with the adaptive multilevel fast multipole method", IEEE Transactions on Magnetics, Vol. 36 No. 4, pp. 680-4.
Burkholder, R.J. and Kwon, D.-H. (1996), "High-frequency asymptotic acceleration of the fast multipole method", Radio Science, Vol. 31 No. 5, pp. 1199-206.
Fetzer, J., Kurz, S., Lehner, G. and Rucker, W.M. (1999), "Analysis of an actuator with eddy currents and iron saturation: comparison between a FEM and a BEM-FEM coupling approach", IEEE Transactions on Magnetics, Vol. 35 No. 5, pp. 1793-6.
Geuzaine, C., Tarhasaari, T., Kettunen, L. and Dular, P. (2001), "Discretisation schemes for hybrid methods", IEEE Transactions on Magnetics, Vol. 37 No. 5, pp. 3112-5.
Henrotte, F. (2000), "Modelling of electromagnetic forces and their effects on arbitrary structures (in French)", PhD thesis 201, University of Liège, Belgium.
Henrotte, F., Nicolet, A., Hédia, H., Genon, A. and Legros, W. (1994), "Modelling of electromechanical relays taking into account movement and electric circuits", IEEE Transactions on Magnetics, Vol. 30 No. 5, pp. 3236-9.
Lombart, P. and Meunier, G. (1993), "A general purpose method for electric and magnetic combined problems for 2D, axisymmetric and transient systems", IEEE Transactions on Magnetics, Vol. 29 No. 2, pp. 1737-40.
Lu, N. and Jin, J.-M. (1996), "Application of fast multipole method to finite-element boundary-integral solution of scattering problems", IEEE Transactions on Antennas and Propagation, Vol. 44 No. 6, pp. 781-6.
Nysveen, A. and Nilssen, R. (1997), "Time domain simulation of magnetic systems with a general moving geometry", IEEE Transactions on Magnetics, Vol. 33 No. 2, pp. 1394-7.
Rokhlin, V. (1983), "Rapid solution of integral equations of classical potential theory", Journal of Computational Physics, Vol. 60, pp. 187-207.
Saad, Y. and Schultz, M.H. (1986), "GMRES: a generalized minimal residual algorithm for solving nonsymmetric linear systems", SIAM J. Sci. Comput., Vol. 7 No. 3, pp. 856-69.
Sabariego, R.V., Gyselinck, J., Geuzaine, C., Dular, P. and Legros, W. (2002), "Application of the fast multipole method to hybrid finite element-boundary element models", Proceedings of the Second International Conference on Advanced Computational Methods in Engineering (ACOMEN), 28-31 May, Liège, Belgium.