References of "Ivanov, Evgeny"
     in
Bookmark and Share    
See detailModelling the hydrodynamics of the Southern Bight of the North Sea: Skills assessment of different configurations (i.e. nesting) in the perspective of coupling with sediment transport
Ivanov, Evgeny ULiege; Capet, Arthur ULiege; Barth, Alexander ULiege et al

Poster (2018, May)

The impact of offshore wind farm installation and dredging activities on the spatial distribution and dynamics of sediment grain size, biogeochemistry and biodiversity will be estimated in the Southern ... [more ▼]

The impact of offshore wind farm installation and dredging activities on the spatial distribution and dynamics of sediment grain size, biogeochemistry and biodiversity will be estimated in the Southern Bight of the North Sea (SBNS) with a focus on the Belgian Coastal Zone (BCZ) in the frame of the FaCE-It research project (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting). The three-dimensional hydrodynamical model ROMS-COAWST was implemented for simulation of the complex hydrodynamics of SBNS and sediment transport. The first level of nesting with the resolution of 1 km was used in the area of Belgian Economical Zone. In order to reach a fine resolution of 250 m in the BCZ, the second level of nesting will be used. Six-hourly ECMWF ERA-interim meteorological data was used to force the model at the sea-air boundary and the coarse resolution model results available from Copernicus Marine Environment Monitoring Service were used to force the model at the open boundaries. Tides and rivers were also considered. Next types of long-run simulations have been conducted: a 10-years climatological simulation and an interannual simulation over 2004-2013 in order to investigate the interannual dynamics. The model accuracy was evaluated through validation of its outputs against observed salinity, temperature and currents data (remote sensing and in-situ). Results validation of currents and temperature and salinity horizontal fields and vertical profiles against available satellite fields and in-situ data, i.e. from the project field campaign, is conducted and discussed. Application of the nested grid and its benefits for results accuracy is also presented. [less ▲]

Detailed reference viewed: 99 (15 ULiège)
See detailApplication of two way nesting model to upscale sediment processes of the Southern Bight of the North Sea: full model validation
Ivanov, Evgeny ULiege; Capet, Arthur ULiege; Barth, Alexander ULiege et al

Poster (2018, March)

The BRAIN project FaCE-iT (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting) funded by BELSPO aims at evaluating the ... [more ▼]

The BRAIN project FaCE-iT (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting) funded by BELSPO aims at evaluating the influence of offshore wind farms settlements and dredging activities on the distribution of sediment grain size over the Southern Bight of the North Sea (SBNS) and the Belgian Coastal Zone (BCZ), as well as associated impacts on biodiversity and biogeochemistry.In this framework an implementation of the tri-dimensional hydrodynamical and sediment transport model ROMS-COAWST was set-up to conduct scenario experiment relating offshore activities to resulting alteration of the seafloor structure. This implementation combines high resolution nested grids covering the Belgian Coastal Zone, embedded into a coarser grid covering the Southern Bight of the North Sea and is forced by ECMWF ERA-Interim data at the air-sea interface, CMEMS data at the open boundaries, TPXO data to introduce/force the tidal impact, and consider the discharge of four main rivers. Currently, the work focuses on assessing the skills of this modelling system to resolve the dynamics of the complex shallow and highly tidal region. The 3-year climatological run for 2006-2009 was performed to test the model ability to simulate the interannual dynamics. The model skills were evaluated by validation against remote-sensing temperature fields, tidal elevations and currents at the Meetnet pylons, and in situ temperature and salinity data provided by the Lifewatch network. We evaluate how grid refinement and different set-up of the nesting strategy enhance essential model skills in relation with sediment transport The further step will be to confront the sediment transport dynamics stemming from the nested system to that resolved from the coarser parent alone. A diagenetic model developed in the frame of FaCE-iT will be joint with the sediment model in order to upscale locally derived alteration of the biogeochemistry and benthic functionality stemming from seafloor texture alteration. [less ▲]

Detailed reference viewed: 38 (5 ULiège)
Peer Reviewed
See detailThree-dimensional modelling of the hydrodynamics of the Southern Bight of the North Sea: first results
Ivanov, Evgeny ULiege; Capet, Arthur ULiege; Barth, Alexander ULiege et al

Poster (2017, April 28)

In the frame of the Belgian research project FaCE-It (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting), the impact of ... [more ▼]

In the frame of the Belgian research project FaCE-It (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting), the impact of dredging activities andoffshorewindfarminstallationonthespatialdistributionofsedimentgrainsize,biodiversityandbiogeochemistry will be estimated in the Southern Bight of the North Sea (SBNS) with a focus on the Belgian Coastal Zone (BCZ). To reach this goal, the three-dimensional hydrodynamical model ROMS-COAWST is implemented in the SBNS in order to simulate the complex hydrodynamics and sediment transport. Two levels of nesting are used to reach a resolutionof250mintheBCZ.Themodelisforcedattheair-seainterfacebythe6-hourlyECMWFERA-interim atmospheric dataset and at the open boundaries by the coarse resolution model results available from CMEMS (Copernicus Marine Environment Monitoring Service), and also considers tides and 4 main rivers (Scheldt, Rhine with Maas, Thames and Seine). Two types of simulations have been performed: a 10-years climatological simulation and a simulation over 20032013toinvestigatetheinterannualdynamics.Themodelskillsareevaluatedbycomparingitsoutputstohistorical data (e.g. salinity, temperature and currents) from remote sensing and in-situ. The sediment transport module will then be implemented and its outputs compared to historical and newly collected (in the frame of FaCE-iT) observations on grain size distribution as well as with satellite Suspended Particulate Matter (SPM) images. This will allow assessing the impact of substrate modification due to offshore human activities at local and regional scales. [less ▲]

Detailed reference viewed: 63 (17 ULiège)
See detailThree-dimensional modelling of the Southern Bight of the North Sea: first results and perspectives
Ivanov, Evgeny ULiege; Capet, Arthur ULiege; Barth, Alexander ULiege et al

Poster (2017, March 03)

The impact of offshore wind farm installation and dredging activities on the spatial distribution and dynamics of sediment grain size, biogeochemistry and biodiversity will be estimated in the Southern ... [more ▼]

The impact of offshore wind farm installation and dredging activities on the spatial distribution and dynamics of sediment grain size, biogeochemistry and biodiversity will be estimated in the Southern Bight of the North Sea (SBNS) with a focus on the Belgian Coastal Zone (BCZ) in the frame of the FaCE-It research project (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting). The three-dimensional hydrodynamical model ROMS-COAWST was implemented for simulation of the complex hydrodynamics of SBNS and sediment transport. The first level of nesting with the resolution of 1 km was used in the area of Belgian Economical Zone. In order to reach a fine resolution of 250 m in the BCZ, the second level of nesting will be used. Six-hourly ECMWF ERA-interim meteorological data was used to force the model at the sea-air boundary and the coarse resolution model results available from Copernicus Marine Environment Monitoring Service were used to force the model at the open boundaries. Tides and rivers were also considered. Next types of long-run simulations have been conducted: a 10-years climatological simulation and an interannual simulation over 2004-2013 in order to investigate the interannual dynamics. The model accuracy was evaluated through validation of its outputs against observed salinity, temperature and currents data (remote sensing and in-situ). Results validation of currents and temperature and salinity horizontal fields and vertical profiles against available satellite fields and in-situ data, i.e. from the project field campaign, is conducted and discussed. Application of the nested grid and its benefits for results accuracy is also presented. [less ▲]

Detailed reference viewed: 53 (6 ULiège)
See detailDeveloping a hydrodynamical model of the Southern Bight of the North Sea for impact studies
Ivanov, Evgeny ULiege; Capet, Arthur ULiege; Barth, Alexander ULiege et al

Poster (2016, November 08)

In the frame of the Brain FaCE-It project (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting), the impact of fining and ... [more ▼]

In the frame of the Brain FaCE-It project (Functional biodiversity in a Changing sedimentary Environment: Implications for biogeochemistry and food webs in a managerial setting), the impact of fining and hardening resulting from dredging and wind farms installation on the sediment grain size distribution has to be assessed at the scale of the Southern Bight of the North Sea (SBNS) with a particular focus on the Belgian Coastal Zone (BCZ). With this aim, the ROMS-COAWST tri-dimensional (3D) hydrodynamic model is implemented to simulate the hydrodynamics in the SBNS. At its open boundaries with the Atlantic Ocean and the North Sea, the model is forced with the results of a coarse resolution model available from Mercator. A high resolution of 250 m is used in the area of the BCZ where the accuracy of model predictions needs to be refined. Model currents, tides, temperature and salinity fields will be described and first validation exercises with satellite and local data will be presented and discussed in regards with the objectives of FaCE-It. In a next step, the model will be coupled with a sediment transport in order to describe the dynamics of suspended particulate materials (SPM) and the distribution of the seafloor sediment grain size. When finalized the hydrodynamic model will be coupled with a diagenetic model and will provide environmental conditions for scaling up local foodweb studies that are performed in the frame of FaCE-iT. The final aim is to assess the impact of substrate modifications due to aggregate extraction and wind farms on the biogeochemistry, benthic functionality and food webs at local (around the wind farm) and regional scales (SBNS). [less ▲]

Detailed reference viewed: 42 (7 ULiège)
Full Text
See detailOperational forecasting of the Black sea: merging model simulations and satellite products
Vandenbulcke, Luc ULiege; Capet, Arthur ULiege; Ivanov, Evgeny ULiege et al

Scientific conference (2016, September 29)

Detailed reference viewed: 29 (3 ULiège)